Beladi primary materials co.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, Equipment: documentation/manual, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Bljdex A U T Uspfx Ab Tor Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame Bljdjx A U Ncspfx Ab Tsr • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Vertical baler HSM VL 600, year of manufacture 2002 Technical data: Blsdpfx Aex A Ur Deb Tjr Manufacturer: HSM Model: HSM VL 600 Year of manufacture: 2002 Pressing force: 60 t Drive power: 7.5 kW Cycle time (idle): 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Machine weight: 3575 kg Materials: Paper, cardboard, film Note: The operating manual is available. Please note: All technical data is based on manufacturer specifications. We do not accept liability for the accuracy of the information provided or for any possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), pressing force: 25 t, Equipment: documentation/manual, Tested, cleaned, full service performed. Fully equipped, ready to use! Blsdpfx Asx Alcteb Tsr

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, pressing force: 5 t, Equipment: documentation/manual, Fully equipped, ready to use! Works perfectly. Blodpfxsx Alb Ns Ab Tor

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 Sh Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400V Maximum bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm x 80 cm deep x 55 cm high Condition: Very good! Functionality checked. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need more bundles of binding wire? Request a quote with no obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We focus on delivering efficient solutions in the areas of internal transportation, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a wide range of machines suitable for deployment in various sectors. See our advertisements for: waste balers for efficient waste management, electric pallet trucks/stackers for fast and safe internal transport, scrubbers for thorough and professional floor cleaning, forklifts in various designs suitable for different working environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you quickly have the right machine at your disposal. Visit our location You are very welcome to view the machines at our premises. We are located at: Schoterlandseweg 94, 8413NE Oudehorne, Netherlands. Visits are possible by appointment, so we can take the time to inform you thoroughly and show you the right machines. Contact Do you have questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you further. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing DIXI Blodox Af Ntjpfx Ab Tsr

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 80 t, Equipment: documentation/manual, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Bledpfox Ac U Hjx Ab Tjr Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baling Press Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2014 Drive: 30 kW Pressing force: 50 t Operating hours: 7,145 Filling opening: 1,600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Blsdpfx Aexzz U Aeb Ter Cycle time: 20 s Tying: 4-fold Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Materials: Paper, cardboard, film, PET bottles The press is in good condition and has been inspected and tested. A video can be found on our YouTube channel or our website. Note: The press has been overhauled. The knives, counter-knives, and all sliding plastics have been replaced. Please note: All technical data are based on the manufacturer's information. We assume no liability for the information provided or for possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works, prepayment only, without warranty or guarantee.

Condition: excellent (used), functionality: fully functional, pressing force: 31 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 400 kg, overall weight: 6,200 kg, empty load weight: 6,200 kg, Equipment: documentation/manual, Baler, channel baling press. Automatic 4-wire tying. Very good condition. Serviced by the manufacturer since new. The press has undergone a complete overhaul. Adjustable bale length: 600–1200 mm. Perfect for baling paper trimmings, waste paper, film, textiles, and more. Blodpfxoxzizqj Ab Ter

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. Bodpfx Asxy Iycob Telr You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: excellent (used), Year of construction: 2021, operating hours: 4,975 h, functionality: fully functional, type of input current: three-phase, transport height: 1,894 mm, The Bergmann PS1400 is an intelligent compaction station, also known as a mini compactor, offering an alternative to traditional baling presses. Instead of compressing recyclable materials into bales, the PS1400-E compacts recyclables directly into a large plastic bag (approximately 1,400 liters) placed on a pallet. This system is ideal for environments with a continuous flow of recyclable material, such as distribution centers, supermarkets, or production facilities dealing with large volumes of packaging waste. Blodpfjxyq Ayox Ab Tor As the machine utilizes a rotating compaction roller instead of an up-and-down compaction plate, the PS1400-E can process continuous streams of recyclables without having to pause for separate press cycles. You simply throw cardboard, plastic film, residual waste or other materials into the machine’s hopper. A powerful steel roller equipped with cutters grabs the material, shreds it, and compresses it down into the bag below. Continuous loading is possible – the feed opening can remain open while the roller turns, ensuring there is no waiting time. This continuous loading capability significantly increases processing speed compared to, for example, a baler (where you need to wait for the press cycle to finish and the door to reopen each time). The PS1400 is user-friendly: it features a simple start/stop button or can even operate fully automatically (on some models it starts when recyclable material is detected). Since recyclable material is neatly compacted into a sturdy PE bag, you are left with a compact “block” of recyclables on a pallet at the end. This package can be easily sealed and moved with a pallet truck or forklift. A major benefit is that the packed waste bales are clean and leak-proof, which allows you to transport them together with goods without risk of contamination. This is especially convenient in supermarkets or production facilities: the compacted waste bags can be sent back on delivery trucks, helping to avoid empty return trips. With the PS1400, you not only save storage space (up to 80% reduced waste volume is achievable, depending on the material), but also labor time. Staff need to make fewer trips to the waste container, and do not have to strap or lift bales—the waste bag is only replaced when it is full, which takes much longer. The machine is safe (equipped with emergency stop and secured access) and, thanks to its electric drive, operates relatively quietly. Maintenance is minimal: the rotating compaction roller is self-cleaning and the hydraulic system is robustly engineered. In summary, the PS1400-E provides a modern, efficient way to compact recyclables directly at the source into manageable packages, delivering significant logistic and cost advantages.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Bale Press Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of Manufacture: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370-450 kg Tying: triple manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film The operating manual and EC Declaration of Conformity are available in German. Bodpfjxyga Isx Ab Telr Please note: All technical data is based on manufacturer information. We do not assume liability for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex works, against prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Baler Dixi 60 SLS, Year of manufacture 2016 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2016 Pressing force: 60 t Blodpfxexygauo Ab Tor Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film The operating manual and EC Declaration of Conformity are available in German. Please note: All technical specifications are based on manufacturer information. We do not accept any liability for the details provided or for potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by prior appointment. Sale is ex-works against advance payment, without warranty or guarantee.

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), VERTICAL BALER FOR SALE OR RENT! (Rental available in Lithuania, Latvia, Estonia, and Poland)! Technical Information: Blodpfoxx Tqksx Ab Tor Manufacturer: HSM Model: HSM 500 VL Pressing Force: 54–540 kN Bale Size: 1200 x 800 x 1200 mm Bale Weight: approx. 500 kg Max. Bale Size: approx. 1200 x 800 x 1200 mm (W x D x H) Press Chamber Dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of Manufacture: 2005 PRICE ON REQUEST!

Condition: defective spare-parts repository (used), Year of construction: 1992, pressing force: 30 t, power: 15 kW (20.39 HP), BAILER FOR SALE WITH DEFECT! Technical Specifications: Bjdpfxoxx S Sys Ab Tslr Manufacturer: Homa Type: BP3000P Year of Manufacture: 1992 Filling Opening: 1050 x 820 mm (L x W) Drive Power: 15 kW Pressing Force: 30 t Settings: Horizontal, Fully Automatic Bale Size: 800 x 900 mm Bale Weight: approx. 300 kg Machine Weight: approx. 5,650 kg Defect – Oil has leaked from the system; water may have entered the system! PRICE: EUR 5,500 (EXW Lithuania, Vilnius)

Condition: used, Year of construction: 1995, pressing force: 85 t, power: 170 kW (231.14 HP), BALER PAAL KONTI 425 C Technical specifications: Manufacturer: Paal Model: Konti 425C Year of manufacture: 1995 Feed opening: 102 x 175 cm Drive power: 170 kW Compression force: 85 t Settings: Horizontal, fully automatic Roll weight: 500–650 kg Press weight: 25 t Bjdpfx Ajxx Su Ujb Tjlr PRICE ON REQUEST!

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Bledpfx Abexx Slas Tor Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400V Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 x 65 cm Condition: very good! Function tested. FLITS Rental & Sales service: With every machine, we provide a bundle of baling wire (120 wires). Need more baling wire bundles? Request a free quote without obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and individuals. We focus on delivering efficient solutions in internal logistics, cleaning, waste processing, and working at heights. Waste baler, Paper baler, Cardboard baler, Plastic baler, Waste compactor, Recycling, Textile baler, Waste processing.

Condition: used, Year of construction: 2002, pressing force: 115 t, power: 150 kW (203.94 HP), For sale: Paal Konti 425 D horizontal baler Technical specifications: Manufacturer: Paal Model: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Pressing force: 115 t Settings: horizontal, fully automatic Bedpoxx Sftofx Ab Tolr Bale weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST!

Condition: used, Year of construction: 1994, pressing force: 30 t, power: 22 kW (29.91 HP), LIKON 200C Horizontal Baler Technical specifications: Engine power: 22 kW Year of manufacture: 1994 Equipped with oil cooler Horizontal tying, 4-fold Pressing force: 30 t Overall dimensions of the baler: 10,000 x 2,000 x 2,750 mm Net weight of the baler: 10 t Feed opening dimensions: 1,400 x 700 mm Bale dimensions: 700 x 1,100 x 1,000–1,200 mm, length adjustable Filled with hydraulic oil No tying wire included Bledpfxsxx R Dus Ab Ter Previously operated in a print shop without a conveyor belt—only processed dry, shredded print waste! Operating hours: 62,639 The baler is in good condition and ready for immediate use PRICE ON REQUEST!

Condition: used, Year of construction: 1994, pressing force: 40 t, power: 22 kW (29.91 HP), Horizontal Baler for SALE/RENT BAUER 300 The baler is in good working condition (previously used in a print shop)! Technical specifications: Secondary raw materials baler unit Manufacturer: BAUER Model: 300 Year of manufacture: 1994 Power: 22 kW Pressing force: 40-50 t Baler dimensions: 10,300 x 2,000 x 3,000 mm Bljdpfxsxx R Ads Ab Tor Tipping weight: approx. 400 kg PRICE ON REQUEST!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total width: 2,583 mm, total height: 3,994 mm, total length: 6,661 mm, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2015 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Bjdpfsxx N Hzex Ab Telr Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Model: V-press 860 Year of manufacture: 2013 Pressing force: 418 kN Blsdoxx Ntbspfx Ab Tjr Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm x 85 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires).

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, bale weight: 600 kg, HSM HL 7009 Re/Li Horizontalballenpresse. Die Maschine befindet sich in sehr gutem Zustand und wird regelmäßig von einem autorisierten Servicecenter gewartet. Diese Ballenpresse ist für größere Entsorgungsprojekte im Einzelhandel sowie in kleinen und mittleren Zentrallagern konzipiert. Die Ballen des Modells HL 7009 haben einen Querschnitt von 1100 x 1100 mm und können bei einer Ballenlänge von 1200 mm bis zu 600 kg wiegen. Dies gewährleistet eine optimale Ausnutzung der Nutzlast des LKWs. Presskraft: 700 kN Spezifische Presskraft: 58 N/cm² Antriebsleistung: 10,5 kW Spannung / Frequenz: 400 V / 50 Hz Bledpfx Aboxx I Hye Tsr Leerlaufleistung (theor.): 42,97 m³/h Einfüllöffnung Breite x Länge: 890 x 1020 mm Ballen Breite x Höhe x Länge: 1100 x 1100 x 1200 mm Gesamtlänge x Breite x Höhe: 5366 x 2525 x 2559 mm Ballengewicht: 600 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, Equipment: documentation/manual, DIXI 80 SLS horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Blsdpfxsxx Iq Ee Ab Tsr Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: used, Year of construction: 1995, power: 2 kW (2.72 HP), Vertical Baler HSM 45 VL for SALE/RENT! Bsdpfx Abexxli Eo Tjlr Manufacturer: HSM Model: 45 VL Year of manufacture: 1995 A total of 8 units available. Sale price: 1,200 EUR per unit (ex works Lithuania)