NAVETECH s.r.o.

Year of construction: 1987, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 325, Bielomatik Jumbo-Roll Collator, collating system for sets with 5 webs, including cross cutter and numbering unit. Production Specifications: Format length: 406.4 – 635 mm (16 – 25 inches) Format length increment: 1/12 inch Paper weight: 90 – 160 g/m² Production capacity: 1-web at 12 inches 10,000 sheets/h Delivery type: sheet or folded Hodpfey Nyb Tex Ag Isfg Unwinding: 5x up to 1270 mm reels, with 70 mm core diameter, 4x up to 700 mm reels, with 70 mm core diameter Maximum web width: 500 mm Number of numbering stations: 1 (2-web possible) Letterpress printing: 1x letterpress numbering unit for 24 inch and 25 inch, Working width: 500 mm Inkjet: possible Cross-perforation station: 1 Tooling: Tool 1 x 16 inch: special divisions 4 1/3 inch, 4 3/12 inch, 12 1/6 inch Tool 1 x 17 inch: divisions 4 1/4 inch, 8 1/2 inch, 17 inch Tool 1 x 24 inch: divisions 6 x 4 inch (4 inch, 6 inch, 8 inch, 12 inch) Tool 1 x 24 inch: special division for cross perforation 18 mm (e.g. Snapout) Tool 1 x 25 inch: with gear division as per 24 inch Stapling: No Crimping: 4 crimping tools for 2-web production possible as 2 inch Swedish crimp Longitudinal gluing: continuous and intermittent possible on both sides for 16 inch, 17 inch and 24 inch. Not intermittent for 11 4/6 inch and 12 1/2 inch Cross gluing: 2 cross gluing units 24 inch, type ESS 17 inch glue cylinders, 2 pieces Edge trimming: max. 15 mm both sides, min. 5 mm one side Separation cut: Yes, for double output Fold lengths: 7 1/3 up to 17 inch possible Format gears for 16 inch, 17 inch, and 24 inch available, also 11 inch + 13 inch (cross perforation must be applied on the printing machine). 11 4/6 inch + 25 inch + 9 inch correction gears Accessories: Fold gears: 8 inch with 24 inch cylinder 8 1/3 inch with 24 inch cylinder and 25 inch gear 8 1/2 inch with 17 inch cylinder 9 inch with 9 inch gear on 17 inch cylinder 11 4/6 inch with 11 4/6 gear 12 inch with 24 inch cylinder 12 1/2 inch with 24 inch cylinder + 25 inch gear 16 inch with 16 inch cylinder 16 inch cross perforation, payment slip + fold on Bielo (special perforation height 17 mm) 17 inch with 17 inch cylinder

Year of construction: 1983, condition: ready for operation (used), A rotary can seaming machine with double-seaming function CCC, which was overhauled by Schmalbach Lubeca, is available. Throughput capacity: 360cans/min, can height range: 77mm-285mm, stations: 6. An on-site inspection is possible. Hfedpfx Agoy Ndfcs Iog

Year of construction: 1971, condition: ready for operation (used), A rotary can seaming machine with double seaming function CCC is available. Stations: 6, can diameter range: 202mm-502mm, can height range: 100mm-700mm. An on-site inspection is possible. Hfjdpfxjy Ndd So Ag Isg

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Hedpfoy Nc H Ejx Ag Ijfg

Year of construction: 1970, condition: ready for operation (used), A Borden beading machine for metal can production is available. Can diameter range: 211mm/603mm, can height range: 300mm-700mm. Documentation available. An on-site inspection is possible. Hedjy I Adujpfx Ag Isfg

Year of construction: 1970, condition: ready for operation (used), A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible. Hjdpfoy I Adnjx Ag Isfg

Year of construction: 1973, condition: ready for operation (used), An FMI separating machine for can production is available. Production capacity: approx. 500cans/min, diameter range: 52mm-99mm, height range: 40mm-85mm. An on-site inspection is possible. Hfsdpfxjy I Adzj Ag Isg

Year of construction: 2023, condition: used, DTF plotter + Plotter Epson SureColor SC-F6400H Hfodoy E Nclepfx Ag Ieg 6 colors with black HD

Condition: used, Pallet strapper two heads two lance with conveyors and wrapping machine Hjdpfoy Eq Rqsx Ag Iefg Pallet strapper can be sold separately.

Year of construction: 2010, condition: ready for operation (used), Film width: 420mm, max. film roll diameter: 280mm, film length range: 500-1000mm, film core diameter: 76mm, film type: airpad, film thickness range: 0.042-0.08mm, capacity: 25-49 cycles/min, fuse protection: 16A, connected load: 2kVA, energy consumption: 1.1kWh, compressed air connection hose diameter NW10: 4-8bar, air consumption: max. 82Nl/min during cushion production, max. 3.5Nl per cycle, continuous sound pressure level: 70dB, length: 1600mm, width: 800mm, height: 1300mm, weight: approx. 266kg. An on-site inspection is possible. Hjdpfx Aoy Duqlog Isfg

Condition: good (used), Year of construction: 2000, Brand: Cevenini ED400 Year of manufacture: 2000 Technical data: Max. log width: 1600 mm Max. roll diameter: 400 mm Min. slitting width: 3 mm Indexing tolerance: +/- 0.1 mm Accessories: - 1 knife - 1 spraying unit Hfodpoy A S Rmjfx Ag Ieg - 1 shaft D 76 mm - 1 knife sharpening device - 1 set of original documentation The machine was completely overhauled 5 years ago. New Siemens control system with visualization.

Year of construction: 2021, condition: used, Max paper size: 760 x 520 mm Min paper size: 320 x 260 mm Max die-cutting size: 750 x 510 mm Max stamping size: 740 x 500 mm Feeder pile height: 1280 mm Delivery pile height: 1100 mm Hedpfx Aoy Anl Heg Iofg Max speed: 9000 sheets/h Pressure: 250 T 8 independent heating zones Power: 38 KW Weight: 14 tons

Year of construction: 1980, condition: ready for operation (used), Various small machines from a packaging factory are available. 1) Multi-spindle paper drilling machine Constanting Hang 106MK/8, year of manufacture: 1980, drilling spindles: 8, drilling range: 3mm-8mm, hole spacing range: 36mm-630mm. Documentation available. 2) Vibrating table Müro 70x72 ST, paper dimensions X/Y: 700mm/450mm, max. stack height: 100mm, weight: approx. 50kg. 3) Small extraction unit Kongshilde TRL 40, year of manufacture: 2023, machine dimensions X/Y/Z: approx. 900mm/1000mm/950mm. 4) Conveyor belt, year of manufacture: 2018, belt height: approx. 970mm, belt dimensions X/Y: approx. 2300mm/600mm, machine dimensions X/Y/Z: approx. 2400mm/950mm/1050mm. An on-site inspection is possible. Only a package sale is possible. Hsdpfxey Aaffo Ag Iefg

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: Hfsdpfx Aeyx Uy Asg Isg • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: like new (used), functionality: fully functional, Model 2DS: Measurable sheet sizes: 100 - 2000 mm Scale graduation: 1/2 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Angular deviations: 1/2 mm Hsdpfjygi A Tox Ag Isfg Glare-free built-in illumination: 4 fluorescent tubes (210 Watt) Voltage: 220V - 50 Hz Exterior dimensions in mm: 2120 x 1150 x 220 Weight (ca.): 108 kg

Year of construction: 2016, condition: good (used), Coating head with unwinder. Application: coating with water-based acrylic adhesives. Hodoyf Ebiepfx Ag Ijfg

Condition: like new (used), functionality: fully functional, Model D2: Measurable sheet sizes: 100 - 1600 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Angular deviations: 1/2 mm Built-in glare-free illumination: 3 fluorescent tubes (174 Watt) Voltage: 220 V - 50 Hz Exterior dimensions in mm: 1775 x 1150 x 220 Weight (without iron frame): ± 86 kg Price per item: 3,000. Hfjdpfeya Hfljx Ag Isg There are three measuring tables of this type available.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Paper making machine / production line including stock preparation, paper machine, calander and winder. Screen and press part manufactured by Papcel in 1998 Drying section manufactured by PaMa, refurbished Screen width: 2350 mm Trim width: 2050 mm Hsdpfxox Tazzj Ag Iefg Capacity: 20 tons / day Grammage range: 80 - 240 g/m2 Product: recycled paper, packaging papers, Schrenz, Medium / Fluting

Year of construction: 1986, condition: used, We offer for sale a complete paper roll rewinder with high utility value. The machine has undergone a range of significant upgrades, greatly enhancing its reliability, quality of operation, and performance. The unit is fully assembled and ready for immediate use. Technical Data: - Machine type: FAMPA KM36 slitter - Year of manufacture: 1986 - Manufacturer: Fampa Beliot, Poland - Working width: up to 2450–2500 mm - Max. working speed: up to 1000 m/min - Paper grammage range: 30–400 g/m² - Max. unwinding roll diameter: Ø 2000 mm - Max. winding roll diameter: Ø 1500 mm Machine Upgrades and Advantages: - Drive system upgrade – value approx. EUR 95,000. The old thyristor (DC) drive has been replaced with a modern system based on two Siemens (AC) motors. - New DIENES knife holder (Germany) – value approx. EUR 50,000. Completely new knife carriage, capable of operating up to 9 knives simultaneously. - GOHA ES automatic unwinder – value approx. EUR 70,000. Hfsdox Sdctepfx Ag Ieg - ProfiCool Genius PCG 300 01-NEB chiller – capacity 2.9 kW. - Control cabinet modernization – improved safety and operational reliability. Commercial Information: The machine is complete and in our plant storage. Location: 57-256 Bardo Availability: Immediate For further information or to arrange a viewing, please contact us.

Condition: ready for operation (used), optionally in combination with an oval riveting machine of the same brand/age; see our other advertisement Hfjdex Nfhljpfx Ag Ieg

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Hfodpfxox Nd U De Ag Ijg

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Hsdpfx Agexzug Se Isfg Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 309002, No minimum price – guaranteed sale to the highest bidder! Hjdpfx Ajxygdmsg Iefg By placing a bid, you commit to collecting the item by 31/12/2025!

Condition: used, Year of construction: 2008, Technical data: Working Width: 1300 mm Maximum Speed: 550 m/min Unwinder Type: Shaftless Maximum Unwinder Roll Diameter: 1000 mm Rewinder Type: Double shaft, center-driven Maximum Rewinder Roll Diameter: 650 mm Hodpexxmr Usfx Ag Isfg Minimum Slit Width: 35 mm / 25 mm (optional) Processed Materials: PP, PET, LDPE, HDPE, paper, and laminated materials Knife Types: Blade slitter and rotary knives Control System: Touchscreen HMI with web monitoring and recipe management Additional Features: • Automatic knife positioning system • Shaftless unwinding with hydraulic tilting arms • Laser core guiding for precise and quick setup • Modular design for easy maintenance and access

Year of construction: 2012, condition: ready for operation (used), A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible. Hfsdpsxrf I Ujfx Ag Ijg