Robert Schotten

Condition: like new (used), Year of construction: 2018, operating hours: 7,500 h, We are selling our Multilift V 15KG with only 7,500 operating hours. The machine can be inspected/tested; original purchase price was €59,000! Technical Specifications: Z-axis (crosswise to the machine longitudinal axis) Stroke: 1,600 mm Max. speed: 3.0 m/s X-axis (parallel to the machine longitudinal axis) Stroke: 900 mm Max. speed: 2.0 m/s Y-axis (vertical/plunge axis) Stroke: 1,000 mm C-axis (for gripper rotation) - Swing range 0° / 90°, both end positions monitored and manually adjustable - Pneumatic drive, including valve control - Max. torque at 6 bar: 28 Nm - Weight: 2.6 kg First vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Second vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Third vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper Fourth vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Tenth pneumatic valve 5/3 with locked center position for gripper functions, piped to the gripper flange with quick-release couplings DN 2.7 for hose size OD 6 / ID 4; customer-side hose connection 8 freely programmable inputs for querying 8 gripper-mounted sensors, pre-wired to the gripper flange with a 25-pin connector; up to 8 sensors can be monitored; the corresponding mating connector for the gripper-side connection is included Csdpfx Aiszi A Utslogw Second interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Third interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Fourth interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Interface with 4 freely programmable inputs and outputs, non-isolated, on a 42-pin socket on the MULTILIFT, for peripheral devices Additional interface with 16 freely programmable inputs and outputs (24V DC), non-isolated, wired to a 72-pin socket on the MULTILIFT Push-in fitting for hose size OD 6 / ID 4

Condition: ready for operation (used),

Condition: like new (used), Year of construction: 2022, operating hours: 12,000 h, We are offering this machine for sale due to a cancelled order. Screw: 40mm / HC version! Core pulls: 2x Csdpfx Aiszi A Ugelegw Blow-out: 2x Selective extraction unit Tool heating: 12x Includes Multilift Select 4x vacuum 4x pressure

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Cgedpjzi A Uaofx Ailjw Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Condition: excellent (used), mileage: 1,117,821 km, power: 375 kW (509.86 HP), first registration: 10/2008, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2008, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, power mirror, spoiler, = Additional options and accessories = - 1 fuel tank Cgjdpfozi A Tvjx Ailsw - 1 sleeping place - Airbag - Armrest - Disc brakes - Front suspension: Leaf - High sleeping cabin - Open roof - Radio - Rear suspension: Air - Roof Spoiler - Sleeper cabin - Sper - Spoilers = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: ready for operation (used), Clamping force: 1000 kg Overhang: 150 mm Cgsdpfozi A Tpex Ailjw Arbor diameter: 40 mm Table diameter: 170 mm Installation height: 300 mm Space requirement: 420 x 380 x 1500 mm

Condition: used, mileage: 572,281 km, power: 324 kW (440.52 HP), first registration: 01/2014, tire size: 315/70 R22.5, axle configuration: 4x2, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2014, Equipment: ABS, central locking, cruise control, electric window regulation, parking heater, power mirror, = Additional Options and Accessories = - Aluminum fuel tank - Alloy wheels - Headlights Cgsdpfx Aezi A Tisilsw - Alternating current - Toolbox = Further Information = Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Alloy wheels; Steered; Tire tread depth left: 2 mm; Tire tread depth right: 2 mm; Suspension: Leaf spring suspension Rear axle: Dual tires; Alloy wheels; Tire tread depth left inside: 2 mm; Tire tread depth left outside: 2 mm; Tire tread depth right inside: 2 mm; Tire tread depth right outside: 2 mm; Suspension: Air suspension Damage: None

Condition: used, functionality: fully functional, total width: 28,000 mm, shelf height: 3,500 mm, support length: 2,700 mm,

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Codpjzi A S Ssfx Ailjgw Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Cgedpfxszi A S Eo Ailow Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Csdpfxozi A Sxj Ailegw Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, ARBURG A 470 H 1000-170 HIDRIVE (32.000 h) (S&P 3796) Manufacture year: 2016 Operating hours: 32,000 Stunden Screw: 30 mm Injection pressure: 2000 bar Cgjdpjzi A Srefx Ailow Stroke volume: 85 cm³ Clamping Force: 100 t Tie bar distance: 470 x 470 mm Mould installation height min.: 250 mm Plate distance max.: 850 mm Dimensions: 4100 x 1700 x 2400 mm Eeight: 5030 kg Connected load: 21 kW Accu, Robot Interface EM67, EM73, Airvalve Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Sanding belt width: 200 mm Sanding belt length: 1800 mm Table surface area: 230 x 600 mm 5 sanding speeds via stepped pulley drive Electrical connection: 400 V, 0.55 kW Cgsdpfxezi A Sle Ailew

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Cjdpezi A Sfsfx Ailsgw Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: used, first registration: 07/2022, Kögel central axle swap body trailer, 22.5-inch deep, rigid drawbar, SAF axles, tire size 385/55 R22.5, for swap bodies C715, C74, C782, for bridge heights from 1,120 mm to 1,320 mm. 3 units available! Sale exclusively to businesses, with no warranty whatsoever. Errors and prior sale excepted. Cgedpfx Aezi A R Ueiljw

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Cgsdpfx Aszi A R Isilew Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: ready for operation (used), Sanding belt width: 200 mm Sanding belt length: 1500 mm Codezi A Rzspfx Ailjgw Table surface area: 240 x 460 mm 1 belt speed Electrical connection: 380 V Space requirement: 880 x 550 x 1080 mm

Condition: used, Year of construction: 2011, Hesse & Co MS 2504 – Guillotine shear with geared motor - Year of manufacture: 2011 Technical data - Cutting capacity: 4 mm Cedpezi A Ruofx Ailogw - Cutting length: 2550 mm - Cutting angle: 1° 30' - Strokes per minute: 42 - Table width: 450 mm - Table height: 800 mm - Back gauge (max. length): 750 / 100 mm - Motor power: 7.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): 3050 x 1330 x 2260 mm - Weight: 3300 kg

Condition: used, Kündig ENORM PRIMO – TOP CONSTANT TABLE MACHINE / automatic head positioning Csdpfezi A Rhox Ailegw Wide-belt calibrating and fine sanding machine Combination unit: contact roller and pneumatic sanding pad unit Enormatic Digital thickness display for workpiece height Belt drive motor power approx. 9 kW Contact roller level continuously adjustable via grit scale Infeed and outfeed table with roller support Working width 1100 mm Feed speed 2.5 - 15 m/min Machine will be PROFESSIONALLY REFURBISHED Available from stock Lieboch

Condition: reconditioned (used), Diosna/Alexanderwerk - Used - Capacity: 120 kg of dough - 2 speeds - 2 speeds - Refurbished Cgsdpfszi A Rbsx Ailow - Bowl guard - On wheels - 12-month warranty - Price upon request

Condition: good (used), Year of construction: 2010, 420 C 1000 - 290 Thermoplastic cylinder, complete, 40 mm, highly wear-resistant Selogica direct control system Hydraulic system with 2 regulating pumps Anniversary model GOLDEN EDITION Thermoplastic processing Open nozzle, 40 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for air blow-out device 1 Selector unit, lateral installation including connection Core pull, 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket distribution, 1 CEE, 1 Schuko additionally Interface for printer, serial USB CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Fault indicator, acoustic 3 electrical heating circuits for tool heating Interface for coloring device 4 freely adjustable cooling circuits Machine-specific cooling circuits, freely adjustable Csdpfxozi A N Dj Ailogw Equipment package, extended monitoring Equipment package, extended movement sequences Equipment package, production control Equipment package, optimization / operating assistance Equipment package, quality assurance Equipment package, documentation CD with operating manual and spare parts list Without granulate container 50 L

Condition: used, machine/vehicle number: 5961, power: 1.3 kW (1.77 HP), input voltage: 400 V, height adjustment type: mechanical, rotational speed (max.): 2,250 rpm, rotational speed (min.): 80 rpm, total width: 600 mm, total length: 1,000 mm, total height: 1,800 mm, throat depth: 293 mm, table width: 420 mm, table length: 300 mm, overall weight: 280 kg, Equipment: rotational speed infinitely variable, ALZMETALL AX 3 SV Pillar Drill Technical data / Features: Manufacturer: ALZMETALL Type: AX 3 SV Serial number: 5961 Spindle taper: MK 3 Spindle travel: 120 mm Overhang: 293 mm Table size: 420 x 300 mm Column diameter: 110 mm Continuously variable speed control 80 - 2250 rpm (in 2 gear stages + 2 motor stages) Cgjdpfx Aiszi A Nkelow Automatic quill feed: 0.1 / 0.2 mm/rev Electrically monitored spindle guard Emergency stop button Quick-change drill chuck Weight: approx. 280 kg Space requirement: 1000 x 600 x 1800 mm (L x W x H) Technical data subject to change without notice.

Condition: good (used), Year of construction: 2014, 420 C 1000 - 290 Cgodpfxszi A Nde Ailjw Thermoplastic cylinder, complete, 35 mm, highly wear-resistant Standard screw coupling, coupling geometry, dual-edged Control system: Selogica direct Hydraulic system with 2 control pumps Anniversary model: GOLDEN EDITION For processing thermoplastics Open nozzle, 35 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for blowing system 1 Selector unit, lateral installation, including connection Core puller, 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket outlet: 1 CEE, 1 Schuko (German standard) Interface for printer, serial USB CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Fault indicator, audible 3 electric heating circuits for tool heating Interface for coloring device 4 free cooling circuits, manually adjustable Machine-specific cooling circuits, manually adjustable Equipment package: Extended monitoring Equipment package: Extended motion sequences Equipment package: Production control Equipment package: Optimization / operating assistance Equipment package: Quality assurance Equipment package: Documentation CD: Operating manual and spare parts list Elastic machine mounting on vibration damping elements Connection for ejector plate securing Ejector quick-release coupling Control cabinet, water-cooled Socket outlet: 1 CEE, 1 Schuko Hydraulic ejector Protective device, open at the top

Condition: ready for operation (used), Year of construction: 1977, Pressing force: 1000 kg Stroke: 240 mm Overhang: 150 mm Table diameter: 180 mm 3 table cutouts: 16, 45 and 55 mm Space requirement: 600 x 420 x 1500 mm Cgodpfozi A I Tox Ailow

Condition: excellent (used), Year of construction: 2015, operating hours: 7,500 h, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, Injection molding machine KRAUSS MAFFEI KM 160-750 CX Stock No.: 503699 Manufacturer: KRAUSS MAFFEI Type: KM 160-750 CX Control: MC6 Year of manufacture: 2015 Operating hours: 7500 h Technical data, clamping unit Clamping force: 1600 kN Tie bar spacing h x v: 520 x 520 mm Platen size h x v: 820 x 845 mm Minimum mold height: 300 mm Maximum mold opening: 950 mm Opening stroke: 650 mm Ejector stroke: 150 mm Ejector force: 43 kN Mold weight: 1850 kg Technical data, injection unit Screw diameter: 45 mm Cgjdpfx Aozi A Itoiljw Injection volume: 318 ccm Injection pressure: 2336 bar Screw length: 22 l/d Screw speed: 265 rpm Plasticizing rate: 29 g/s PS Free injection rate: 14 g/s PS Number of heating zones: 6 Dimensions & weight Machine dimensions L x W x H: 4.3m x 1.6m x 2m Total weight: 8200 KG Equipment Screen text: German Screen text: English Screen text: Polish CEE socket 16A CEE socket 32A Hydraulic core puller 2x Leveling elements Schuko socket 10A Technical data, handling Machine type: Linear Manufacturer: Krauss Maffei Control: LRX 50 Year of manufacture: 2015 Handling weight: 5 kg X-axis: 620 mm Y-axis: 1200 mm Z-axis: 1500 mm Rotation axis C: 90° Screen text: German and English