AIR-VAL s.a

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm Dodpfx Abox Eixzj Tjla stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1987, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, max. sheet width / max. sheet width: 2000 mm max. sheet thickness / max. sheet thickness( St 50): 10 mm min. sheethickness Blechdicke / min. sheet thickness: 3 mm Anzahl der Richtwalzen / number of straightening rollers: 13 Walzen / rollers Richtwalzendurchmesser / diameter of straihgtening rollers: 145 mm Richtgeschwindigkeit / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Mittenabstand der Richtwalzen / distance b/n rollers centers: 150 mm Stützwaldermesser / diameter of bottom rollers: 290 mm Anzahl der Stützwalzen / number of bottom rollers 21/24 Anzahl der Abstützungen( oben/unten): 3 /3 Hubgeschwindigkeit der Traverse / speed of adjustm. of traverse: 0,71 mm / sec Hubweg der Traverse / way of traverse: -18 mm to +42 mm max. Schwenkung der unteren Traverse / max. swivel of lower traverse: 8 mm Hauptantriebsmotor / power of main motor: 30 kW Dlodpfx Aex Eixqsb Tsa Gewicht der Maschine / weight of the machine: 32 t

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Dsdpfxex Eixds Ab Tela Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) Dlodpfx Aox Eiw Heb Tsa - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 2003, Manufacturer: Seydelmann Model: K 60 Ultra Year: 2003 Djdpfsx Eiwysx Ab Tela Capacity: 60 liter Speed: 2 bowl speeds / 2 mixing speeds Power: 20kW / 400V / 50Hz Machine Dimensions LxWxH: 1.200x950x1.250 mm Machine Weight: 800 kg.

Condition: used, mileage: 639,983 km, power: 184 kW (250.17 HP), first registration: 12/2016, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/70 R 22.5, fuel: diesel, wheelbase: 5,080 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,490 mm, loading space length: 7,300 mm, loading space height: 2,480 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, soot filter, spoiler, tail-lift, traction control, = Additional Options and Equipment = - Airbags - Alarm system - Aluminum fuel tank - External thermometer - Heated mirrors - Passenger seat - Hill start assist - Leaf suspension - Roof hatch - Roof spoiler - Differential lock - Digital tachograph - Dual fuel tank - Electric windows - Electrically adjustable exterior mirrors - ESP (Electronic Stability Program) - Speed limiter - Air conditioning - Power steering - Air suspension - Air-suspended seats - Fog lights - Particulate filter - Radio/CD player - Spare wheel - Reversing camera - Side door - Sun visor - Lane departure warning system - Stability control - Central locking = Additional Information = Dlodpfx Absx Eiwtj Toa Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Drivetrain AdBlue system: Yes Transmission Transmission: ZF, automatic Axle Configuration Tire size: 315/70 R 22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,100 kg; Steering; Tire tread left: 70%; Tire tread right: 70%; Suspension: leaf spring Rear axle: Twin wheels; Differential lock; Max. axle load: 11,500 kg; Tire tread left inner: 90%; Tire tread left outer: 90%; Tire tread right inner: 90%; Tire tread right outer: 90%; Reduction: single reduction; Suspension: air suspension Dimensions Dimensions (L x W): 928 x 255 cm Weights Unladen weight: 8,170 kg Payload: 10,430 kg GVW (Gross Vehicle Weight): 18,600 kg Functional Tail lift: DHOLLANDIA DHLM.20, rear platform, 1,500 kg Body manufacturer: SAXAS Maintenance APK (Roadworthiness Inspection): valid until 03/2026 Identification Registration number: 78-BHZ-3

Condition: refurbished (used), Refurbished envelope inserting machines TSI 2.0/2.5, identical to Quadient DS-40i Dledpfsx Eiwmjx Ab Tea

Condition: used, functionality: fully functional, machine/vehicle number: 224088, Cleaning systems for the cleaning of assembled PCBs, including a backup deionized water treatment unit, leftover liquid cleaner, powder cleaner, and activator. Dodpfx Aox Eiv Neb Tola

Condition: good (used), Year of construction: 2001, Tube diameter 76.1 mm Max. tube feed length 4500 mm Max. bending radius 200 mm Machine weight approx. 1.7 t Required space approx. 6000 x 1000 x 1300 mm - Max. tube diameter: 76.1 mm - Max. tube feed length: 4500 mm - Max. bending radius: 200 mm - Bending direction: right - Electronic 1-axis control Djdpfx Asx Eivveb Tela - 2-axis measuring system - Electronic display of torsion - Electronic display of longitudinal position - Torsion angle unit with stops - Early mandrel retraction - Automatic mandrel lubrication with micro-oil dosing Accessories: - Incl. bending tools 21.3 / 26.9 / 33.7 / 42.4 / 48.3 / 60.3 / 76.1 mm x 2D - Incl. various mandrels

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Chip conveyor: yes Tool eye: yes Dljdpsx Eivpefx Ab Tea Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Height: 2800mm Weight: 22000kg

Condition: good (used), control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190 ° Connected load: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tooling is available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm A few mandrels have a direct engraved marking. These have the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm Dlsdpfxsx Eivis Ab Toa The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000.

Condition: used, Year of construction: 1993, total height: 2,820 mm, total length: 6,200 mm, total width: 1,900 mm, - Year: 1993 - Documentation available: No - CE certificate present: No Dodpfxjx Eivcj Ab Tela - Serial number: 22330 - Max. cutting height vertical [mm]: 2050 - Max. cutting height horizontal [mm]: 5600 - Min. saw blade diameter [mm]: 290 - Max. saw blade diameter [mm]: 303 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Automatic: Yes - Voltage [V]: 380 - Current consumption [A]: 10.3 - Fuse [A]: 15 - Transport dimensions: 6200mm x 1900mm x 2820mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), type: N 250/85 A temperature: 850°C connected load: 29,0 A current consumption: 0 kW voltage: 400 V 3/N Light dimensions (W x D x H): approx. 650 x 750 x 650 mm Dljdpsx Eiu Sefx Ab Tsa

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Djdpfsx Eiuxex Ab Tjla Two-hand control (two-hand release) 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG 3. Control system Manufacturer: Siemens Type: Simatic Panel 4. Additional equipment Magnifying lamp Worktable Ergonomic safety work chair

Condition: like new (used), Year of construction: 2022, functionality: fully functional, planing width: 800 mm, table length: 1,200 mm, workpiece height (max.): 300 mm, roll diameter: 150 mm, TECHNICAL DETAILS Planing width: 800 mm Feed table length: 1,200 mm Feed belt speed: 4 - 19 m/min Workpiece thickness: 3 - 300 mm Extraction port outlet: 180 mm 4-knife cutterhead diameter: 150 mm MACHINE DETAILS Motor speeds: 1/6 mm/s EQUIPMENT Dodex Eiurspfx Ab Tsla • Articulated grooved feed roller • Two pressure relief rollers in table • Two rubber-coated outfeed rollers • Electromagnetic brake • Automatic star/delta start-up • Automatic table adjustment • Tersa-type cutterhead • Knife setting gauge • 4-point table fixing • Noise protection • Machine built according to CE electrical and safety standards

Condition: good (used), Year of construction: 2000, Tube diameter: 76.1 mm Tube insertion length: 4500 mm Max. bending radius: 200 mm Dlodpfxsx Eiulj Ab Tea Bending direction: right Machine weight approx.: 1.7 t Additional information Control: electronic 1-axis control

Condition: excellent (used), Manufacturer: WITTMANN Model: W818-8339 Year of manufacture: 2016 Type of equipment: Removal system / manipulator Movement range (X / Y / Z): Dodpfx Aex Eiufjb Tjla X: 420 mm Y: 1,200 mm Z: 1,500 mm Equipment: Safety devices

Condition: good (used), Rail for oxyfuel cutting system, torch, oxyfuel cutting system, machine cutting torch, oxyfuel cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Machine cutting torch rail: Messer Griesheim – Quicky -Dimensions: 11x 1060/105/H8 mm / 2x 2060/105/H8 mm -Lengths: 11 x 1060 mm / 2 x 2060 mm Dedpsx Eit Usfx Ab Tjla -Price: 45 euros per meter -Transport dimensions: 2060/105/H95 mm Total weight: 28 kg

Condition: excellent (used), Manufacturer: EPSON Dlsdpfxjx Eit Io Ab Toa Model: PA3-AS10 Year of manufacture: 2010 Control system: Epson RC180 control unit Siemens Simatic Touch Panel operator panel Equipment / configuration: Receiving station with 2 × 16-slot magazines (total of 32 placement positions)

Condition: used, mileage: 606,100 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, empty load weight: 8,100 kg, maximum load weight: 9,900 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Equipment: ABS, air conditioning, all wheel drive, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, MAN TGS 18.440 4X4H tractor unit First registration: .100 km with documentation Euro 5 EEV 4X4 Hydrodrive Long cab ZF manual gearbox Air conditioning, auxiliary heater Dlodpfxsx Eitzo Ab Tja Tipper hydraulics AP rear axle Rear axle with air suspension Wheelbase: 3900 mm Tyres 385/65 R22.5 Tyres 315/80 R22.5 Unladen weight: 8,100 kg Export / net price: 15,900 euros All details without guarantee, errors excepted.

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Spindle speed 4,000rpm, Dlsdjx Eitujpfx Ab Toa milling speed 10,000rpm, Main spindle power 18.5Kw, C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 221S-350-100 Year of manufacture: 2000 Dedpox Eitnjfx Ab Tjla Serial number: 181964 Control system: Control type: Arburg Selogica Clamping unit: Clamping force: 350 kN Injection unit: Screw diameter: 20 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Dlodjx Eithopfx Ab Tea Year of manufacture: 2011 Serial number: 218960 Control system: Control type: Arburg Selogica Clamping unit: Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Dedpsx Eitbsfx Ab Tsla Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, planing width: 630 mm, planing height: 250 mm, number of planer blades: 4, table length: 1,100 mm, empty load weight: 700 kg, TECHNICAL DETAILS Planing width: 630 mm Planing height: 250 mm Number of planer knives: 4 Feed speed: 7 + 14 m/min Table length: 1,110 mm MACHINE DETAILS Motor: 7.5 kW Extraction port: 160 right Dimensions & Weight Dimensions (L x W x H): 1,070 x 1,200 x 1,060 mm Weight: approx. 700 kg Dedjx Eir Repfx Ab Tola EQUIPMENT Motor brake Electric height adjustment Digital display Tersa quick-change system