Oplex S.a. De C.v.

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Blodoyg I Nfspfx Aafjc Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine (CMM) from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for use – quality you can rely on. General machine data: Machine type: Global Image 9.12.8 Year of manufacture: 2001 Manufacturer: Hexagon Measuring range: 900 x 1200 x 800 mm Bjdpfxsyg I Iuj Aafslc Accessories: Probe head mount: PH10M probe head Probe: TP200 Renishaw Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0, B3C-LC controller As specialists, we are happy to provide you with individual advice to find the right machine for your measurement tasks. Worldwide delivery available upon request!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages Blsdpfsyg I Ihsx Aafsc • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: excellent (used), functionality: fully functional, mileage: 746,657 km, first registration: 01/2021, fuel type: diesel, fuel: diesel, color: white, driver cabin: sleeper cab, number of beds: 2, Year of construction: 2021, Equipment: ABS, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, spoiler, start-stop system, tachograph, tire pressure monitoring, Single-owner vehicle, always and exclusively serviced by an official DAF workshop, with complete, certified invoices and documentation. Equipment: High-roof cab, alloy wheels, metallic paint, stainless steel side bars, independent air conditioning, full aero kit, alloy wheels, in-cab TV, independent climate control, spare wheel, retarder, spoilers, mudguards, side skirts, dual fuel tanks, automatic transmission, retarder, alloy wheels, front super single tires, parking air conditioning, in-cab TV, air horns, full ADR certification, fitted with MICHELIN tires. Regularly serviced with certified and guaranteed mileage. Leasing and/or financing options available for up to 60 installments with the most competitive rates on the market. 12-month warranty option available. The description may contain errors or features differing from the actual vehicle, which must be verified on site. This listing does not constitute a contractual commitment. Bledpfxsyg I H Rs Aafoc For more information or clarification, please call the numbers provided, also available via WhatsApp Direct. Mr. Paolo Antonio Gorgoni The photo set is taken on-site at our premises, so the pictures are real and represent the current condition of the vehicle. Please also note that the system automatically adds features and accessories, so some discrepancies may occasionally occur.

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 500 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been checked, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: global Image 7.10.5 Year of manufacture: 2004 Manufacturer: Hexagon Measuring range: 700 x 1000 x 500 mm Accessories: Probe head mount: Probe head HP-10 MQ Probe: TP200 Renishaw Bljdeyg I H Dopfx Aafjc Additional equipment: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are pleased to advise you individually as a specialist to find the right machine for your measuring application. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2006, ALLIANCE prefeeder lead edge feeder 6 printing units with chamber doctor blade and IR dryer Bjdpfx Aajyg I Hwefelc revolver system non-stop delivery unit Maximum sheet size: 1,530 x 2,400 mm / 60.25" x 94.25" Minimum sheet size: 460 x 600 mm / 18" x 24" Maximum printing area: 1,520 x 2,400 mm / 60" x 95" Board thickness min./max.: 1.0 - 9.0 mm / 0.039" - 0.354" Maximum mechanical speed: 10,000 sheets/hour

Condition: good (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 1,500 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 700 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Reference XI 15.9.7 Year of manufacture: 2018 Manufacturer: Hexagon Measuring range: 1500 x 900 x 700 mm Accessories: Probe head mount: HP-SX-5 probe head Probe head: +2 change discs Bledpsyg I Hdefx Aafoc Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0, Controller B5 As specialists, we are pleased to offer you tailored advice to find the right machine for your measurement requirements. We offer worldwide delivery upon request!

Condition: used, axle configuration: 3 axles, first registration: 06/1999, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 1999, Axle configuration Tyre size: 385/65 R22.5 Bodsyg I E Topfx Aafslc Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; tyre tread left: 2 mm; tyre tread right: 3 mm Rear axle 2: tyre tread left: 3 mm; tyre tread right: 3 mm Rear axle 3: tyre tread left: 4 mm; tyre tread right: 4 mm Weights Unladen weight: 5,720 kg Payload: 32,280 kg Gross vehicle weight: 38,000 kg Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 10/2020, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2020, Axle configuration Bjdpfx Ajyg I E Hoafelc Tyre size: 385/65 R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 4 mm; right: 4 mm Rear axle 2: Tyre tread left: 4 mm; right: 4 mm Rear axle 3: Tyre tread left: 4 mm; right: 4 mm Weights Unladen weight: 6,478 kg Payload: 31,522 kg Gross vehicle weight (GVW): 38,000 kg Condition Damage: none

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Model: ACS WZH10-4080-2 BT Angelantoni Walk-in Climatic Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and is equipped with advanced safety features specifically tailored for battery and accumulator testing (e.g., lithium-ion). Special feature: Safety equipment for battery testing: The system is specially equipped for battery and accumulator testing, including: - Pressure relief flap for controlled pressure discharge in the event of a malfunction - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → Ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research tests - Endurance, aging, and stress tests Technical data (from nameplates & documentation) General: Bjdpfx Aaeyg I Eyofelc Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climatic chamber, double-door Test range: Temperature: –40 °C to +80 °C Relative humidity: 10% to 95% RH Electrical data: Supply: 400 V 3-phase + N + PE 50 Hz Rated power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit strength: 10 kA Refrigeration system Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: External dimensions (approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), machine/vehicle number: WDB6740132K071209, mileage: 244,423 km, power: 103 kW (140.04 HP), first registration: 09/1994, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 6,000 mm, total width: 2,400 mm, total height: 2,800 mm, Year of construction: 1994, Equipment: ABS, differential lock, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest Blodsyg I Etspfx Aafec - Day Cabin - Drum brakes - Front suspension: Leaf - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels; Differential lock Technical condition: very good Visual appearance: very good

Condition: new, Year of construction: 2023, Clamping force: 320 t Screw diameter: 30 mm Shot weight: 97 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 106 cm3 Type: Multicomponent Bodjyg I Emepfx Aafolc Drive: Hybrid

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor Bsdpfx Ajyg I Egoafslc • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: good (used), Year of construction: 2016, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and guaranteed ready for operation – quality you can rely on. General machine data: Machine type: TIGO SF 5.6.5 Year of manufacture: 2016 Manufacturer: Hexagon Measuring range: 500 x 600 x 500 mm Accessories: Probe mount: HP-S-X1H probe head, scanning head Probe: +2 changer plates Bedpfoyg I Eaox Aafslc Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consultation as specialists to help you find the right machine for your measurement tasks. Worldwide shipping available upon request!

Condition: repair required (used), CMZ TC20YS year 2009 CNC: FANUC 31I model A Distance between centers: 800 mm Max swing over bed: 920 mm Max swing over slide: 745 mm The machine is equipped with Heidenhain optical scale on X, Y, Z axes Travel: X - 315 mm Z - 800 mm B - 803 mm Y axis: +80 / -60 mm Main spindle bar capacity: Ø66 mm, chuck size 210 mm Subspindle bar capacity: Ø46 mm, chuck size 165 mm Main spindle speed: 4000 rpm Sub spindle speed: 5000 rpm Bjdpfxsyg I D Nj Aafelc Milling spindle speed: 4000 rpm Turret: 16 positions Renishaw tool probe Subspindle Included with the machine: -Chip conveyor with coolant tank and pumps -Machine documentation -Jaws and tool holders -Live tool holders 6 pieces (2/4)

Condition: excellent (used), machine/vehicle number: XLER6X20005301163, mileage: 1,550,191 km, power: 412 kW (560.16 HP), first registration: 11/2012, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, total length: 6,500 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2012, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, power mirror, retarder, spoiler, = Additional options and accessories = - 2 fuel tanks - 2 sleeping places - Airbag - Armrest Blodjyg I D Aopfx Aafjc - Disc brakes - Front suspension: air - High sleeping cabin - Lift Axle - Open roof - Radio/Cassette player - Rear suspension: Air - Roof Spoiler - Sleeper cabin - Spoilers - Sunroof = More information = Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock Rear axle 2: Lift axle; Steering Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 2023, functionality: fully functional, overall weight: 1,930 kg, Binderberger GI25EZ proline horizontal meter log splitter Year of manufacture: 2023 Weight: 1,930 kg Operation: electric or PTO Towable with secondary registration plate up to 25 km/h Splitting length: 130 cm Splitting speed (cm/s): forward: 25/27, return: 23/25 Bljdpfeyg I Dpsx Aafjc

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 1,604 h, power: 34 kW (46.23 HP), motor manufacturer: Kubota, gearing type: hydrostat, fuel type: diesel, maximum speed: 25 km/h, color: red, Equipment: air conditioning, cabin, front power take-off, hydraulics, lighting, Mountain Tractor: + Reform-Werke + Metrac H4 - Type: 226.010.020 + Year of manufacture: 2009 + 1,604 operating hours + Front hydraulics with lateral displacement + Rear hydraulics + Front and rear PTO (540 rpm) + Front and rear linkage + Selectable front-wheel, all-wheel steering, or crab steering + Air conditioning + Hydrostatic transmission, fast/slow (max speed 25 km/h) + 4-cylinder Kubota diesel engine (V2203), 2,197 cc, 34 kW Bodpfx Asyg I Dijafslc + Differential locks + Vehicle from municipal ownership Receive all new vehicle listings by e-mail – subscribe to our NEWSLETTER! Subject to errors and prior sale!

Condition: excellent (used), Used VINOGEL 8 chiller unit, designed for regulating the temperature of wine tanks during the fermentation, stabilization, and storage phases. This model is well-known for its reliability, precise control, and robust construction, meeting the needs of both private wineries and professional facilities. With a cooling capacity of 27,000 frigories/hour, the Vinogel 8 enables effective temperature management, even under demanding climatic conditions. It features a 316L stainless steel coaxial heat exchanger, ensuring full food-grade compatibility and excellent durability. TECHNICAL SPECIFICATIONS - Model: Vinogel 8 - Cooling capacity: 27,000 frigories/hour - Refrigerant: R407C - Compressor: Hermetic - Electrical supply: 3-phase 400 V / 50 Hz - Installed power: 8.45 kW - Rated current: 26.3 A - Product temperature control range: -12°C to +45°C - Permissible ambient air temperature: -15°C to +40°C - Recommended pump flow rate: 60 to 80 hl/h - Hydraulic connections: Ø 40 mm MACON - Structure: Stainless steel frame on wheels - Instrumentation: Control PLC, digital thermostats, HP/LP pressure switches Applications: - Fermentation tank temperature regulation - Temperature control in vinification - Wine thermal stabilization - Winery cooling and temperature maintenance This used Vinogel 8 chiller offers an economical, efficient, and ready-to-use solution for reliable temperature management, without the investment required for new equipment. DIMENSIONS Bodjyg I Dcjpfx Aafjlc - Length: 1110 mm - Width: 750 mm - Height: 1480 mm - Weight: 220 kg Compact and mobile design for easy installation in the cellar and convenient transfer between tanks. ANNEXES - 6-month warranty - CE compliant

Condition: new, Year of construction: 2023, Clamping force: 500 t Screw diameter: 60 mm Shot weight: 620 g Distance between tie bars V: 920 mm Distance between tie bars H: 920 mm Shot volume: 678 cm3 Type: Multicomponent Drive: Hybrid Bjdpfx Aaoyg I A Sefslc Special multicomponent machine

Condition: used, Price plus VAT. The goods are also available in other quantities and configurations. Included in this package: • 37 uprights, each 4,000 mm x 1,100 mm (blue) • 37 used upright protectors, U-shape • 216 beams, each 2,700 mm (orange) • 432 safety pins This creates a single rack row with 36 bays, each with 3 beam levels + floor level = total capacity of 408 pallet places (800 kg per pallet). Approx. 280 uprights and 2,000 beams are available for this system. Please contact us for further information. Manufacturer: Mecalux Condition: Used, good condition Height: 4,000 mm Length: approx. 101 linear meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Shelf load: 2,400 kg Bay load: 7,200 kg Pallet spaces: 408 Bsdpfxsyg I A Ej Aafjlc Accessories such as: • Floor anchoring • Connectors • Load capacity signage • Impact protection barriers • Guard rails • Wire mesh decking • Rear mesh panels • Support bars • Safety barriers and much more. Please do not hesitate to contact us for inquiries!

Condition: excellent (used), CATALOG NUMBER 7617 TECHNICAL DATA - Wheel diameter: 610 mm - Table dimensions: 670x640 mm - Table tilts, angle adjustable - Motor: 2.2 kW - Brake - Max. cutting height: 380 mm - Throat distance (blade to frame): 550 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1150x800x2200 mm - Weight: 360 kg ADVANTAGES Bsdpfxeyg I Axs Aafolc – German-made – Not repainted – In very good condition – Used saw Net price: 7900 PLN Net price: 1880 EUR based on a rate of 4.2 EUR (Prices may fluctuate with significant exchange rate changes)

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,000 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been inspected, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Bljdeyg I Aljpfx Aafsc Machine type: Crysta C Apex 123010 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 1200 x 3000 x 1000 mm Accessories: Probe head mount: PH10MQ Probe: Renishaw TP 2000 Additional accessories: Calibration sphere (ceramic), Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer you expert advice as specialists to help you find the right machine for your measurement task. Worldwide delivery available on request!

Condition: used, Price plus VAT. The goods are also available in other quantities and configurations. Included in this package: 5 x uprights, each 4,000 mm x 1,100 mm (blue) 5 x U-shaped column guards, used 24 x beams, each 2,700 mm (orange) 48 x safety pins This results in a racking row with 4 bays, each with 3 levels plus floor storage space, totaling 48 pallet spaces (800 kg per pallet) Approximately 280 uprights and 2,000 beams are available for this system. Please feel free to contact us. Manufacturer: Mecalux Condition: used, good condition Height: 4,000 mm Length: approx. 11.30 linear meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Bsdpfjyg I Afjx Aafolc Shelf load: 2,400 kg Bay load: 7,200 kg Pallet spaces: 48 Accessories such as: Floor fixings Connectors Load capacity warning signs Impact protectors Guide rails Grating shelves Back mesh panels Depth supports Safety barriers and much more... Just ask us!

Condition: excellent (used), CATALOG NUMBER 7612 Technical specifications: - Max. workpiece width: 1030 mm - Max. workpiece height: 150 mm From above: Bodpfjyg Iz Isx Aafslc - Metal pressure roller - Split metal pressure roller - Unit (profiled rubber calibrating roller + pad + metal roller) - Smooth rubber idler roller From below: - Infeed roller - Feed belt - Outfeed idler roller - Pneumatically oscillating belts with photocells - Electric table height adjustment - 2 feed rates - Main motor: 11 kW - Brake - Handwheel for precise sanding height adjustment - Feed motor: 0.33 kW - Table lifting motor: 0.12 kW - Operating pressure: 8 bar - Extraction port diameter: 150 mm - Dimensions (L/W/H): 1500 x 1750 x 2000 mm - Weight: 965 kg ADVANTAGES - German made - Original paint - Used sander in very good condition Net price: 28,900 PLN Net price: 6,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change if there are significant exchange rate fluctuations)