REFPOL sp z oo

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Ppodpeyc Tnxjfx Aaljl Dimensions: 700 X 1450

Year of construction: 1976, condition: ready for operation (used), Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible. Pjdpfeyarrksx Aalspl

Condition: used, Used Alpine Model 630AFG stainless steel Aeroplex fluidized bed opposed jet milling system. Stainless steel classifier wheel belt driven by 15kw, 400/690volt, 2/50, 2940rpm motor. Unit includes (4) jet nozzles. Includes product feeding vessel approx 230 litre capacity with stainless steel screw feeder driven by 1.5kw, 400volt, 3/50, 1440rpm motor. Unit all mounted on common mild steel frame. Psdpfx Ajyanwvealspl Specifications: Motor Power: 20.1 hp

Condition: used, Used JetPharma Model MC JetMill50 stainless steel mobile jet mill. Process gas maximum pressure 12 bar at 0 to 50 deg.c. Mounted on stainless stand. Podpfx Aajx Tibkjlopl Specifications: Grinding Air Pressure: 174 PSI

Year of construction: 2007, condition: used, Manufacturer: Pallmann Model: PPSR 10-300 Year: 2007 Type: Contra Selector mill / Fine Impact mill Gentle grinding of dry or wet materials, soft to medium hard. High-throughput cold grinding with fine particle size distribution. Weight : 7000 kg Rotor drive speed: 1590 rpm (110 kW, 380 V, 1500 rpm) Sieve basket speed: 660 rpm (55 kW, 380 volts, 1500 rpm) Impact rotor diameter: Ø 100 cm Screen width: 30 cm Number of hammers: 60 Pedpfxox R D Iye Aaljpl Pneumatic transfer pickup at machine exit Material : 316L stainless steel Technical documentation available

Condition: ready for operation (used), A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China Ppedex R Dt Aspfx Aalel

Condition: excellent (used), Bead Mill VMA Getzmann Dispermat SL50-C Power: 3 kW Podpfxox Rzxis Aalspl Speed range: 0-6000 rpm Milling chamber volume: 0.5 l Rod temperature sensor Very good condition, directly from production!!!

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Ppjdpfxox H Nvzs Aalsl Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Year of construction: 2015, condition: ready for operation (used), A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Ppedpfx Aaexvrt Solol

Condition: used, Hollow body granulator and secondary granulator for pre-shredded material. Rotor diameter 450 mm Rotor width 600 mm 3 rotor knives (diagonal cut), 2 stator knives Podpfx Ajxgrx Nealspl Drive motor 22 kw

Condition: used, The Herbold PU 500 pulverizer is suitable for fine grinding of plastics and soft to medium-hard materials. Pedpfx Aajxgrqfeljpl Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Drive 90 kW With equipment Podpfxoxgrn Rs Aaljpl

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Pedpfx Ajxgrnqoalopl Drive power: 90–200 kW

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, Psdsxgrgyepfx Aaljpl housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm

Condition: used, power: 160 kW (217.54 HP), Cutting mill TRIA 120-80 FN / Cutting mills New hydraulics, new knives, new bearings Psdpfsxgrfvsx Aalspl Drive: 160.0 kW Rotor knives: 7x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Inlet: 800 x 1200 mm

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Pjdpfxjxgrfij Aalspl Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Drive motor 37 kW (can be increased to 75 kW) Rotor diameter: 500 mm Rotor width: 600 mm Inlet opening: 500 x 600 mm Psdpexgrd Ejfx Aaljpl 5 knives, diagonal cut Hinged housing, with 2 stator knives.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Ppodpfsxgrdfex Aalol

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Podpfx Aajxgq Ucjlopl Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Psdpfxexb Aggs Aalepl Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Year of construction: 1976, functionality: unexamined, machine/vehicle number: TM5, input voltage: 380 V, Used Molteni Milano TM5 Multipurpose Mixer Manufacturer: Molteni Milano Model: TM5 Pjdpfx Aasw H I Tlolopl Voltage: 380 Volt Last inspection: June 2017 Year of manufacture: 1976

Condition: used, functionality: unexamined, machine/vehicle number: Pulverisette 05102, Used Fritsch Pulverisette ball mill with cabinet and accessories Manufacturer: Fritsch Model: Pulverisette 05102 Ppedpfsw Hct Hjx Aaljl Voltage: 220V Includes mobile cabinet with contents

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Ppsdpjw Dv Aiefx Aalsl Including 200kW 1500 rpm motor (other options possible upon request) Year of manufacture: 2006 Atex compliant Including DA576 feeder Magnetic separator and air gravity separator

Year of construction: 1999, condition: good (used), Wijnveen GHM 1250 Total width of grinding chamber: 1250 mm 150 kW motor with 1500 rpm (other motors available upon request) Pjdpfjw Dv Acsx Aalepl 1000 mm + 250 mm configuration for various screen perforations for coarse/fine grinding as desired. Including feeder with magnet Refurbished in 2014

Year of construction: 1967, condition: ready for operation (used), A roller crusher BMD machine and a gyratory crusher Fried. Krupp (Thyssen-Krupp) are available. 1) Roll crusher BMD machine BHS Walzwerk V1-800, year of construction: 1967, general overhaul: 1981, power requirement: 30kW. 2) Gyratory crusher Friedrich Krupp Gyradisc fine crusher. On-site inspection is possible. Pjdpfov Dwixex Aalepl