DPS Machinery

Condition: used, functionality: fully functional, Year of construction: 1992, Ref. No.: Lg 35325 Single-sided decoiler PBK E 1200 Used, in good condition Year of manufacture: 1992 Itodsxn Tpropfx Afion Technical data Load capacity approx.: max. 1,200 kg Strip width: max. 300 mm Expansion range: approx. 360 to 420 mm Outer coil diameter: approx. max. 1,500 mm Without drive, with pneumatic brake. Expansion of the supporting segments is manual via hand crank over joints. Number of supporting segments: 4 Coil side guide via heavy-duty limiting arms, can be clamped using quick-release fasteners. Uncoiler stand in robust box-type design as a welded structure.

Condition: used, Year of construction: 2015, Decoiler 4 tons incl. coil turner, year 2015. The machine can be inspected at any time. Ijdpfxexn Rrwo Afijtn

Condition: ready for operation (used), Decoiler, Sheet Decoiler, used machine Overall dimensions: 750 × 550 × 1260 mm Electrical data: 400 V Itedjxfkypspfx Afijn Opening: 190 – 420 mm

Condition: new, Year of construction: 2025, Roller for sheet metal unfolding. Working width: 1.250mm, loading capacity up to 2 tons and a brake. Itsdexd Rgyjpfx Afien

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 - Loading capacity 2.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Itodpexd Rgmjfx Afijn - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg Itjdoxd Rgajpfx Afisn - Inner φ 480-530 mm - with 5 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: used, Year of construction: 1984, Reel 150-1 - Mounting Ø 320mm - Ø 650mm - Shipping possible at extra cost Isdpfsxb S Nwex Afistn

Condition: good (used), Type SOP20 / 200M / ZU No. 212772 . Technical data : Load capacity 200 kg Diameter of the systems 900 mm Belt width max. 220 mm Spreading range approx. 240 - 550 mm Drive 0.37 kW Speed approx. 15 rpm Iedpfx Aew Uz Uwjfietn . .....

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, degree of automation: automatic, actuation type: manual, coil inner diameter: 510 mm, coil weight: 6,000 kg, coil width: 1,500 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Brand New 6T-1250 Hydraulic De-coiler ITEM I : 6-ton X1250MM hydraulic tensioning, power feeding, with pressure arm. Hydraulic tensioning of steel coil inner hole, oil pump power: 2.2KW Inner diameter of steel coil: 510 ± 30mm, maximum outer diameter of steel coil: 1500mm Load bearing capacity: Max 6 tons Core shaft diameter: 203mm Side panel: A3 panel, integral, side panel thickness 18mm Steel coil width Max.1250mm Wedge type tensioning, 4 claws Rotating oil cylinder, with the core shaft rotating simultaneously Gear head reduction motor, motor power 4KW, with a forming speed of 25M/min in conjunction with the main engine Iedjw Nqi Hepfx Afiotn Delta inverter The pneumatic clamping arm at the top of the feeding machine prevents the steel coil from loosening, and the air valve control action is controlled by electronic control Customer provided gas source Direction of the compression arm: When facing the core axis, the compression arm is on the right side; Self stop device controls the start and stop of steel coil rotation Other terms 1. Voltage standard: 380V/50HZ/3Ph 2. Operation nameplate: English/Chinese 3. Paint color: Uncoiler body RAL5015 (blue) Oil cylinder: red; Uncoiling mechanism

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, degree of automation: automatic, actuation type: manual, coil inner diameter: 450 mm, coil weight: 5,000 kg, coil width: 1,250 mm, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Brand New 6T-1250 Hydraulic De-coiler 5-ton X1250MM Isdpsw Nqgxsfx Afistn oil pump power: 2.2KW Inner diameter of steel coil: 450-530-630, Rotating oil cylinder, with the core shaft rotating simultaneously Gear head reduction motor, motor power 3.0KW, Voltage: 380V/50Hz/3Ph

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, degree of automation: automatic, actuation type: manual, coil inner diameter: 510 mm, coil weight: 6,000 kg, coil width: 1,500 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Brand New 6T-1250 Hydraulic De-coiler 6-ton X1250MM hydraulic tensioning, power feeding, with loading trolley and pressure arm Hydraulic tensioning of steel coil inner hole, oil pump power: 2.2KW Inner diameter of steel coil: 510 ± 30mm, maximum outer diameter of steel coil: 1500mm Load bearing capacity: Max 6 tons Core shaft diameter: 203mm Side panel: A3 panel, integral, side panel thickness 18mm Steel coil width Max.1500mm Wedge type tensioning, 4 claws Rotating oil cylinder, with the core shaft rotating simultaneously Gear head reduction motor, motor power 4.0KW, matched with main machine forming speed 25M/min Itedpjw Nfi Uofx Afijn Delta inverter The pneumatic clamping arm at the top of the feeding machine prevents the steel coil from loosening, and the air valve control action is controlled by electronic control Direction of the compression arm: When facing the core axis, the compression arm is on the right side; Self stop device controls the start and stop of steel coil rotation 6-ton feeding machine trolley 4-column design The car is moving on the I-beam at the bottom of the feeding machine Up and down travel distance of the car: Max 350mm Front and rear travel distance of the car: Max. 2000mm Voltage: 380V/50Hz/3Ph

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm Itsdpfswzu E Djx Afisn coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm year: 2012 (never used)

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm Iodpfx Afowzu Edjistn year: 2012 (never used)

Condition: excellent (used), Year of construction: 1980, spool width: max. 1.600 mm spool ID: 150/250/400 mm Iodpfx Ajwzuwtjfiotn coil weight: max. 4 t coil OD: max. 1.250 mm year: approx. 1980

Condition: new, Year of construction: 2025, neu 2025 070116 prompt, Zwischenverkauf v Türkei 10900 € 209.28 € 1 1250 kg 1300 mm 450 - 550 mm Ijdjwv H Awjpfx Afijtn 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control WITH PNEUMATIC DOWNHOLER

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs Iodpfx Afjwvv Rqoijtn - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, functionality: fully functional, Year of construction: 2001, NOXON Schroeder + Bauer DPH 1400 Double Pallet Decoiler – Year 2001 Technical Specifications: Model: DPH 1400 Year of Manufacture: 2001 Serial Number: 167041 Tabe diameter: 1400 mm Max load: 3000 kg. Voltage: 400 V Frequency: 50 Hz Power Consumption: 0,75 kW Current: 14.2 A Weight: 1000 kg Strip pulling motor Loop control sensor Original documentation in English and schematics CE Certified Itjdpjwpciyefx Afisn Manufactured in Germany General Description: The DPH 1400 is designed for reliable coil unwinding from pallets, particularly suitable for large and heavy coils. With its robust construction and 1400 mm table diameter, it is perfect for demanding applications in metal forming, stamping lines, and automated feeding systems. Condition: Used, Fully functional Ready for immediate use German origin, well-maintained We can assist with international shipping and loading. On stock stamping equipment from renowned brands Bruderer, Mabu, Schaal, Bihler, Soprem and more.

Condition: used, functionality: fully functional, Year of construction: 2002, coil outer diameter: 1,600 mm, coil weight: 2,000 kg, NOXON Schroeder + Bauer PHM 1600 Pallet Decoiler – Year 2002 Technical Specifications: Model: PHM 1600 Year of Manufacture: 2002 Serial Number: 167040 Tabe diameter: 1600 mm Max load: 2000 kg. Voltage: 400 V Frequency: 50 Hz Power Consumption: 1.9 kW Current: 14.2 A Weight: 750 kg Strip pulling motor Loop control sensor Original schematics CE Certified Manufactured in Germany General Description: The PHM 1600 is designed for reliable coil unwinding from pallets, particularly suitable for large and heavy coils. With its robust construction and 1600 mm table diameter, it is perfect for demanding applications in metal forming, stamping lines, and automated feeding systems. Condition: Used, Fully functional Ready for immediate use Iedjwpcg Sjpfx Afistn German origin, well-maintained We can assist with international shipping and loading. On stock more stamping equipment from renowned brand Bruderer, Bihler, Soprem, Mabu, Schaal and more.

Condition: new, neu 070143 November 2025, Zwischenve Türkei 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times Itsdpfxewirz Sj Afijn photoelectric proximity ensor SICK for sag control

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19100 € 366.72 € 4000 kg 1300 mm 450 - 550 mm 600 mm 50 mm 80 mm Isdpowirz Eofx Afiotn motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 4000 600 M D1300) € 21.800,--

Condition: new, Year of construction: 2024, neu 2024 Iodpfxewirrko Afistn 7314 prompt, Zwischenverkauf v Türkei 14800 € 284.16 € 1 2500 kg 1300 mm 450 mm 550 mm 600 mm 80 mm 1600 mm 1550 mm 2000 mm 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder

Condition: used, Year of construction: 1988, gebraucht 1988 070009 prompt, Zwischenverkauf v Deutschland 1600 € 400 mm 700 mm 1500 mm 2050 mm 820 mm Iodpfxowirq Ts Afietn 1000 mm with brake with 2 spare mandrels

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 12100 € 232.32 € Iodjwirqaspfx Afiotn 2500 kg 1300 mm 450 mm 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 2500 600 M D1300) € 14.800,-- BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER!

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Isdpfx Afowirp Njistn Alternative: Variant with pneumatic pressure arm (CMC P3 2500 400 M D1300) € 14.500,--

Condition: new, neu ca. 12 Wochen ab Auftrags Itedpfx Aewirp Asfion Türkei 8200 € 158.26 € 1250 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 1250 400 M D1300) € 10.900,--