Bed Slats Rails

Condition: good (used), functionality: fully functional, For sale is a robust lathe/woodturning lathe for processing wooden workpieces. The machine features a stable machine bed design, an adjustable tailstock, and an M33 spindle mount. With a center distance of 1,000 mm and a center height of 180 mm, the machine is suitable for various turning operations and longer workpieces. Technical data: Hfodpfx Ajzl D Rnoa Eji Overall length: approx. 1,520 mm Overall width: approx. 520 mm Center distance: approx. 1,000 mm Center height: approx. 180 mm Spindle mount: M33 Speeds: 1,000 / 1,700 / 2,700 rpm Motor power: 0.9 kW Voltage: 240 V Weight: approx. 45 kg Adjustable tailstock Tailstock with quill and handwheel Belt drive Stable machine bed design Used machine with signs of wear and tear consistent with age and use. The condition can be seen in the photos. Inspection and test run possible by appointment. Transport possible for an additional charge! The machine will be inspected before sale. Due to the age of the used machine, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: excellent (used), CATALOGUE NUMBER: 6901 TECHNICAL DATA - Max. turning length: 1200 mm - Max. turning diameter: 210 mm - Max. turning diameter with standard support: 90 mm - Max. dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copying units - Additional 3 cutting tools on hydraulic cylinders (2 installed) - 4 types of spindle speeds - Automatic or manual machine operation - Spindle motor power: 9 kW Hfedpfszlr Izox Aa Eji - Hydraulic pump motor power: 3 kW - Diameter of extraction nozzle: 90 mm - Dimensions for transport (length/width/height): 3700x2100x2000 mm - Weight: approximately 3000 kg ADVANTAGES - Made in Italy - Automatic hydraulic copying unit - Original DTR documentation - Unpainted - Used lathe, very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, functionality: fully functional, Hempel P9 cylindrical grinding machine for turned parts Working length 900 mm Hfjdpfjzlcvpsx Aa Eei Maximum grinding diameter 100 mm Grinding performed using oscillating brushes

Condition: used, Year of construction: 1995, centre height 250 mm centre distance 1.300 mm engine 1,4 kW Hfedpfx Aaezk Rgms Eoi Heavy-duty copying lathe (or copying woodturning lathe) Hapfo Model AP 5000/ME for precise woodturning and copying of wooden workpieces. Ideal for single-piece and batch production of stair balusters, railing posts, table legs, and furniture parts; the ME model features an electric feed mechanism for consistent machining results. Includes a wide range of accessories.

Condition: good (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 090977 / 280777, Oma brand woodturning lathe sanding machine, model 120/A, serial number 090977, used. Oma brand woodturning lathe sanding machine, model Cosbo 120, serial number 280777, used. Hfodszkqxvjpfx Aa Eoi

Condition: used, Year of construction: 2022, Wood rounding tool for straight and slightly curved pieces Minimum diameter 5mm Maximum diameter 65mm Minimum length 350mm Maximum length (with loader) 1500mm (without loader, unlimited) 5.5kW tool motor Feedforward motor 0.75kw Electronic variable speed from 2 to 17 m/min 380V Hfsdpfx Aajzivlfj Esi Spindle lubrication Supplied with adjustable tools from 15 to 65mm Also a 30/35mm milling head with exit rollers Adjustable loader according to workpiece length Machine almost new, very little used Very good deal to seize!!! Supplied with documentation and service keys

Condition: used, CATALOG NUMBER 7650 Technical data: Hodozh Ivtopfx Aa Eefi - max working length: 1500 mm - max working diameter: 250 mm - milling (disc cutter): 7.5 kW - spindle – 2800 rpm 3 kW - spindle speeds: 700/1200/1500/2000 rpm - grinding unit: 0.75 kW - hydraulic motor: 3 kW - total power: 17.75 kW - air supply requirement: 6-8 bar - feeder for beams up to 150x150 mm - extraction port diameter: 100 mm, 160 mm - transport dimensions (L/W/H): 4350x2300x1980 mm - weight: approx. 3000 kg ADVANTAGES – German-made – automatic hydraulic duplicator – original DTR documentation – not repainted – used lathe, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), !!!DEMO MACHINE!!! For sale: a Drechselmeister MIDI 2 Plus lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: Hfedszgr Siepfx Aa Esi - Center height approx. 178 mm / Swing diameter 355 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 RPM - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) safety groove - Tailstock with interchangeable tailstock spindle 100 mm MK2, trapezoidal thread, and measuring scale! (Optional: interchangeable tailstock spindle with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, turning tool, woodturning, turning, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister MIDI 3 lathe with a center distance of approximately 400 mm. Hfedpfx Aszgr Nuoa Esi The machine is in very good condition and has been refurbished and inspected by our specialist personnel. (Fully functional) Technical data: - Center height 190 mm / Turning diameter approx. 378 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) drain safety groove - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread, and scale! (Optional: Interchangeable quill with ER25 collet chuck system for drilling) - Motor 0.7 kW / 1 HP (230 V) with high-quality frequency inverter and “SAFE-START” function - Weight approx. 60 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, lathe tools, woodturning, machining, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister Twister XL lathe with a center distance of approximately 800 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical data: - Center height 250 mm - Swing over bed 490 mm (up to 900 mm with optional external turning attachment!) - Center distance approx. 800 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper MK2 - Frequency inverter (2 belt stages) 60 – 1,350 rpm and 150 – 3,600 rpm Hfjdozgr Hgepfx Aa Eoi - Quill travel 150 mm (with scale) and trapezoidal lead screw - Motor 1.5 kW / 2 HP - Weight approx. 290 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, lathe machine, wood lathe, turning, lathe tools, wood turning, turning, machine Reference: R-D1618

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Automatic lathe for turning square stock Hydraulic pump motor with a power of 1.5 kW Maximum length of square stock: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two tool posts with profiling tools 1 front spindle for drilling or front profiling 1 roughing tool Machine weight: approximately 1800 kg Hfjdpfxszgc Rcs Aa Eei CE marking

Condition: used, Oma lathe 1200 mm Genini 1200 mm lathe grinder Hfedpfx Aajzfyzvs Esi Conveyor belts for unloading lathes and loading automatic grinders

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths during turning, as well as additional divisions and pitches during milling. Several programs for turning and milling operations can be stored. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch lead screws. The copy length can be divided into up to 6 sections with different feed rates for turning highly profiled workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, and within each stage, stepless operation is possible via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Center distance approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate steplessly adjustable, rapid traverse with safety end stop. Hydraulic copy carriage with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide Four-jaw steady rest Four-jaw chuck 125mm Copy tools, center punches, hexagon drive, etc. Milling unit with 3kW motor for mounting on the copy carriage 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belts new Original paint, only a few spots retouched Very good condition from a small carpentry shop It is evident that the machine was not used to produce high volumes. Hfsdpfx Aaozfwm Ns Eei Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Hfsdpfx Aaezd Uv Ee Eei Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: good (used), Code: 0410 Brand: CMC - ITALY Model: LT 1500 Lathe with copying device for wood and similar materials Technical specifications: Max centre distance 1500 mm Hfodpfx Aajzc Rmle Eoi Centre height 240 mm Max working diameter (without copying device) 450 mm Copying device with manual handwheel feed Gouge rest Tailstock Spindle speed rpm 600/1000/1500/2000 Motor power 1,5 Hp three-phase Overall dimensions mm 2430 x 730 x 1230 h Weight kg 340

Condition: good (used), Code: 0396 Brand: EINHELL Model: TC - WW 1000 Wood lathe Technical specifications: Power supply 220 Volt Centre distance 1000 mm Turning diameter 280 mm Motor power 350 W N° 4 speeds (890/1260/1760/2600 rpm) Hfedezaa Adopfx Aa Eoi Backing pad Tailstock Overall dimensions mm 1500 x 200 x 350 h Weight kg 23

Condition: repair required (used), functionality: not functional, Intorex TR90 lathe body. Hfjdpfoy Uggtsx Aa Eoi

Condition: used, Oma brand sander for turned wood, model Cosbo 120 serial number 071178, used. Hfedpsy Ud Twsfx Aa Eji

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli OMK300 + UF 150/220 Turning length: 300 mm Maximum square bar: 100x100 mm Hedsy R T N Tepfx Aa Eefi Minimum square bar: 20x20 mm Copy turning operation Drilling transfer UF 150/220

Condition: excellent (used), functionality: fully functional, Genini ROTOUR 100 lathe automatic Hjdpsy R Abxofx Aa Ejfi Max working length: 300 mm Max turning diameter: round Ø 140 mm, square 100×100 mm Spindle motor: 15 HP Spindle speeds: 2050-2800-4100-5600 rpm Pump motor: 3 HP Grinding motor: 0.5 HP

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a TEKNATOOL Nova Nebula 230 DVR woodturning lathe with a direct drive ranging from 50 to 4,000 rpm. The demonstration machine is in excellent condition. Technical specifications: - Center height: approx. 230 mm - Maximum distance between centers: 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove Hfodpfxsy N R A Io Aa Eoi - Spindle and tailstock taper: MT2 (Morse Taper 2) - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-position indexing system - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Forwarding delivery: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related keywords: woodturning lathe, lathe, turning machine, woodturner, woodturning, turning tools, wood spinning, turning, machine Reference: R-A0117

Condition: excellent (used), NEW MACHINE!!! For sale is a Drechselmeister Twister ECO+ wood lathe with a centre distance of approx. 720 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical specifications: - Centre height 200 mm - Swing over bed 395 mm (can be increased with optional outboard turning attachment) Hfedpfxsy Nm Tpj Aa Eji - Centre distance 720 mm (extendable) - Spindle thread M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt ranges): 60 – 1,350 and 180 – 3,750 rpm - Motor with forward and reverse operation - Tailstock quill travel 100 mm - Motor 1.5 kW / 2 HP (230 V connection) with frequency inverter - Weight of floor-standing version (incl. cast iron legs) 165 kg The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: wood lathe, metal lathe, turning machine, woodturning, turning, turning tools, woodturning machine, machine Reference: R-D1618

Condition: excellent (used), DEMONSTRATION MACHINE!!! Hfodpfx Aaey Nm Rhs Esi For sale is a Drechselmeister Stratos ECO wood lathe with a center distance of approx. 680 mm. The machine is in very good condition and has been refurbished and inspected by our qualified staff. (Fully functional) Technical specifications: - Center height approx. 230 mm - Swing over bed approx. 455 mm (up to 800 mm with optional outboard turning device!) - Center distance approx. 680 mm (expandable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Spindle speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight: 177 kg The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: wood turning lathe, metal lathe, lathe, wood lathe, turning, woodturning tools, woodturning, turning machine Reference: R-D1618

Condition: excellent (used), For sale is a Drechselmeister MIDI 2 Plus woodturning lathe with a centre distance of approx. 400 mm. The used machine is in very good condition. Technical specifications: - Centre height: approx. 178 mm / max. turning diameter 355 mm - Centre distance: approx. 400 mm (extendable with bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle mount: M33 x 3.5 (Morse taper MK2) with ASR (Euro) safety groove - Tailstock with 100 mm MK2 interchangeable quill - Trapezoidal thread and measuring scale - Motor: 0.7 kW / 1 HP (230 V) with high-quality frequency converter - Weight: approx. 53 kg Hfodpfxey E Il Ee Aa Eji The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning lathe, lathe, metalworking lathe, wood lathe, woodturning, turning tools, wood turning, machining, machine Reference: R-M61TS

Condition: excellent (used), functionality: fully functional, OMA COSBO 120 Grinder for Turned Parts Hfsdpfx Ajy Elw Eja Esi Working length: 1200 mm Two grinding units Polishing brushes with oscillation Template-based operation