Mavim Gesmbh

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Fodoyryvuepfx Aa Eopd

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, power of feed motor: 7,500 W, Due to restructuring, we are offering this operational Valon Kone VK26LY debarking machine, year of manufacture 1983. Manufacturer: Valon Kone Model: VK26LY Year: 1983 Condition: operational Category ID: 1381 Type ID: 1837 Machine type: debarking machine Please refer to the attached diagram for key technical data. Maximum log diameter according to manufacturer: 10 – 60 cm. We recommend a range of 10 – 40/50 cm. Recently installed spare parts: - Shaft Fpodeymxvpjpfx Aa Esd - Bearing blocks - Slide rails All components are functional and adjustable. Sharpened knives and used spare knives are also included. Dismantling and loading must be carried out independently. Loading equipment can be provided if required. A video is available upon request. If you have any questions or require further information, please feel free to send us a message.

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Complete with a feed conveyor. Fpjdpfxoyl Aqhe Aa Ejd The machine was not in operation and was in storage.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11598-A, overall weight: 3,900 kg, input frequency: 50 Hz, input voltage: 380 V, We are offering this used TAYME P-60 debarker, year of manufacture 2011. Technical Data – Debarker TAYME P-60 Peeling Machine (Year 2011) Manufacturer: TAYME S.A. Model: P-60 Machine type: Log debarker / Peeling machine Year of manufacture: 2011 Serial number: 11598-A Weight: 3,900 kg 1. Mechanical Specifications Tool type – Peeling heads with toothed knives Maximum pressure – 400 bar 2. Electrical Specifications Rated voltage – 380 V (three-phase) Frequency – 50 Hz Estimated power – approx. 25 kW 3. Hydraulic System Hydraulic flow rate – 22 l/min (according to nameplate) Maximum pressure – 400 bar System type – Stand-alone hydraulic unit with tank and three-phase motor 4. Main Function Fjdpfx Aeycutcja Eopd Industrial machine designed for: - Debarking logs of various diameters - Preparing wood for pallets, packaging, chipping, or primary processing - Peeling through toothed heads and hydraulic pressure The machine is located in Valencia, Spain, and is ready for loading and shipping worldwide. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Full line, semiautomatic, finished material 40–160 mm Fpodpfx Aox U Ealsa Eod

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Ring debarker type VK26MX with centering infeed conveyor and driven out feed guide work. Fsdpjx Svx Hefx Aa Ejpd Electrical starter cabinet included. Min log diameters 10 cm Max log diameters 60 cm Min log length 2 meter Feeding speed 22 - 41 m/min

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Consists of: Fpjdpfex Rv T Ijx Aa Eod - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, overall weight: 30,000 kg, The machine is currently still in operation and can be inspected at any time. Location – Zingsheim. A 5, 27-inch up to 680 mm diameter. Feed up to max. 90 m/min. Weight approx. 30 tons. Shortest wood: 2.4 m. Also well-suited for long timber. Some components should be serviced or repaired upon reinstallation, e.g. valves, swing arm bearings, etc. The rotor bearing is in good condition. The rotor has been replaced. Fjdpox E Tb Ssfx Aa Eepd

Condition: refurbished (used), functionality: fully functional, The VK820 two-rotor machine is equipped with 620 mm rotors and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished in our workshop and is in excellent working condition. Fpodpfox Dip Hex Aa Eed Alternatively, depending on the client’s needs, the rotors can be replaced with 480 mm rotors.

Condition: as good as new (ex-display), Year of construction: 2025, HÄWA / SWT Maschinenbau Debarking Machine – New -- ---Demonstration unit --- Immediately available Fodpfxsxx Am Ue Aa Ejpd - Made in Germany - Model H256 / 800 - Manufactured from a heavy welded steel construction - 4 pairs of main log drive wheels - 1 split, toothed pair of main log drive wheels - Frequency-controlled log drive - Milling arm made from a heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and guide ring - Milling head equipped with carbide inserts - Hydraulic lowering of the milling head - Frequency-controlled feed for milling head - Log drive wheels 800mm - Log diameter 0.2m – 1.0m - Log length 1.0m – 6.0m - Total connected load 35kW - With HBC radio remote control

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 3283, Häwa Round Timber Milling Machine Type 249-193-00 Fpsdpfx Aexvq Hkja Eed Year of manufacture: 1979, Serial No. 3283, Log diameter: 0.30 - 1.30 m Log length: 2.20 - 6.50 m Connected load: 55 kW Round timber feeding station, log carriage, Milling head debarking, scraper chain conveyor with discharge Log sorting system left/right Control panel and electrical cabinets

Condition: good (used), Year of construction: 1995, functionality: fully functional, 1 used Cambio 70 debarking machine with Mayrhofer mechanization, consisting of: Mayrhofer roundwood infeed system with 4 strands, approx. 6 m long and 6 m wide; singling stage and feeder onto the block conveyor; Cambio 70 debarking machine; length measurement; 4 discharge bunkers; overall line length 45 m; scraper conveyor for bark removal. Inspection in operation is possible at any time. Fpedpfxsxvpq Ij Aa Eod

Condition: used, functionality: fully functional, Celma milling machine Bruks RR1000. In full working condition. Fjdpfx Aajxu Du Ee Eepd

Condition: used, Söderhamns Rotary Debarker Cambio 85 - 66 - A Fodoxtc Afopfx Aa Espd Diameter: 10 - 66 cm Main motor: 30 kW

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Extraction unit: newly installed in 2021 Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Overall length: 9,800 mm Wheelbase: 8,800 mm EQUIPMENT Fpedpfoxr Ityex Aa Eed Spare parts package Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: used, Nicholson A5/35” immediately available. Log diameter: 8-90 cm. Fpsdpfx Aaoxpvxxj Eed

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, For sale on behalf of a customer is a Segem ERT 100. The machine was operational until removal. The rotor bearing was replaced in September 2023 (approx. 2000 hours). Fpsdpjxhf N Dsfx Aa Eed

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. The machine has been overhauled. Fpodpfexhdtzox Aa Eod 6-month warranty

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, round log debarker Valon Kone VK-820-C-3R, Fpsdpoxg Tthsfx Aa Ejd Type 820-RE/480/480-12/9-79-RHP-RS/3 Complete with a feed conveyor, feed speed up to 110 m/min Manufactured in 2005 Serviced in 2023, not in use since

Condition: good (used), Year of construction: 2004, A well-maintained Nicholson debarker is being offered for sale. The 4-arm rotor was replaced with a 5-arm rotor in 2010. The machine has already been dismantled. Fpedpfew T U T Djx Aa Esd

Condition: excellent (used), Gearbox 71-75 Log diameter 750 mm weight 10 t Fpjdpsw Syn Rofx Aa Esd

Condition: refurbished (used), Year of construction: 2010, Used Wiedemann 900 debarking machine for sale. Feed speed 20 m/min, rotor 30 kW. The machine is currently available ex works Untersteinach; upon purchase, the machine will be fully refurbished and newly painted at the factory. Price on request. Fsdpfjw I Si Sjx Aa Espd

Condition: used, Year of construction: 1997, VK 550 Combi 3R Debarker-Reducer Combination VK 550 frame with one ring reducer rotor and two counter-rotating debarker rotors. Debarker rotor opening: 620 mm. Service-friendly pull-out rotors for quick and safe maintenance. Fjdpfsw Hy E Tsx Aa Ejpd Ring changer for reducer ring.

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Fpodpfx Aow Emhfsa Eed Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 812 - 5547/V.01.87.110, overall weight: 19,190 kg, For sale is a well-maintained Nicholson debarking plant A 5 B for log diameters up to 56 cm. We used the machine in our small-diameter sawmill (maximum diameter 25 cm). It ran without issues until recently. The knife cylinders were replaced shortly ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast unit. Nicholson debarkers are straightforward to operate! Fpodpfx Aaew D Hy Sj Eod - Minimum length: 200 cm - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm incl. rotor - Feed speed up to 114 m/min (currently set to 95 m/min)