JF Industrieverwertung

Year of construction: 2019, condition: excellent (used), Buchi C-810 flash chromatography system in excellent condition. Binary pump with gradient, flow rate 0–250 ml/min up to 50 bar. UV detector, wavelength range 200–800 nm. Year of manufacture: 2019. Dimensions: 36 × 57 × 68 cm (H). Weight: 25 kg. Hedpfx Aoxn Rtbefiefn

Condition: ready for operation (used), Dionex ICS-5000 pump can be configured for either capillary IC applications or analytical (standard bore and microbore) IC applications. Capillary IC pumps are always isocratic (they deliver one eluent). Analytical IC pumps can be either isocratic or low pressure proportioned gradient. Gradient pumps deliver gradient mixtures of up to four eluent components. The eluent composition selected for a gradient pump can be delivered as Hfjdpfx Aexnpu Dsfijn isocratic, isocratic proportioned, linear ramp, step, curved, or any combination of these. Good working condition. Please check out our other listings as well

Condition: ready for operation (used), The Thermo Scientific Dionex ICS-Series VWD is a highly advanced variable wavelength detector designed to provide accurate and precise detection of analytes in complex samples. It is a vital component of the Dionex ICS-Series chromatography system and is used for a wide range of applications, including pharmaceutical research and development, environmental monitoring, food and beverage testing, and more. The detector is equipped with a state-of-the-art flow cell design that ensures excellent signal-to-noise ratios, providing exceptional sensitivity and selectivity for even the most challenging separations. The flow cell is also designed to minimize dispersion and band broadening, ensuring high resolution and accurate peak detection. The Thermo Scientific Dionex ICS-Series VWD Detector features a variable wavelength range of 190 to 900 nm, which enables it to detect a broad range of analytes. It also has high-speed scanning capabilities, enabling rapid data acquisition and analysis, making it ideal for high-throughput applications. Hfsdpjxnm Rvsfx Afien Good working condition. Please check out our other listings as well.

Year of construction: 2022, condition: like new (used), Due to the planned closure of our laboratory in May/June 2026, we are offering laboratory equipment for sale in very good and excellent condition. The entire set is available. All equipment has been used as intended, regularly serviced, fully operational, and ready for immediate use. The offer includes, among others: LCS MS/MS, GC MS, fume hoods, spectrophotometer, shakers, laboratory refrigerators, digestion unit, water bath, laboratory furniture, and many more. This is an excellent opportunity for research institutions, universities, and companies in the biotechnology, chemical, and medical sectors to acquire high-quality equipment at attractive prices. Early reservation of individual devices is possible. Collection is available from May 2026 or upon individual arrangement. We invite you to contact us and inspect the equipment on site in Poland, Warmian-Masurian Voivodeship. Hedpfxoxmhfre Afiofn

Condition: used, functionality: unexamined, machine/vehicle number: DX2TLVKJO, Used Brookfield viscometer DX2TLVKJO in case. Hfodpfx Afexmhbyeien

Condition: ready for operation (used), functionality: fully functional, The Nuova® II magnetic stirrer is ideal for use in cold rooms and incubators with noncondensing atmospheres. Low-profile design, with speed control for 100 to 1000rpm range. Direct-drive motor system delivers quiet, smooth stirring action at low speeds and thorough churning action at higher speeds. The Nuova® II hot plate and stirrer can be used in several applications besides just the standard reagent mixing and heating. It can also be used for the preparation of culture media, acid-based titrations requiring constant temperature and for the slow stiffening of culture media. Good working condition. Please check out our other listings as well. Hodpoxmhbtjfx Afiofn

Condition: used, functionality: unexamined, machine/vehicle number: 5415R, Used Eppendorf 5415R "Micro" refrigerated centrifuge With timer and adjustable speed, Digital Manufacturer: Eppendorf Model: 5415 R Hedpjxmha Aofx Afiefn Power supply: 220 volts Max speed: 13,200 rpm Max. capacity: 24×1.5/2.0 ml or 0.2/0.4/0.5/0.6 ml or 36×0.5/0.2 ml Weight: 21 kg Price per unit.

Condition: used, functionality: unexamined, machine/vehicle number: HeraCell, Used Kendro | Heraeus HeraCell Incubator Manufacturer: Kendro | Heraeus Model: HeraCell Hedpexmg Urofx Afijfn Max. temperature: 90°C Voltage: 230 V, 0.55 kW Class: 3.1 Internal chamber dimensions: 52 x 43 x 60 cm

Condition: used, Dear Sir or Madam, Hfodpfxsxl Tv Ho Afien We hereby offer you the following device for sale: Beckman Coulter DxFLEX System B5-R0-V0 The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 19 October 2025. After the auction ends, you will be informed of the auction result within 72 hours.

Year of construction: 2020, condition: used, This listing is for a Pall UF/DF Tangential Flow Filtration System. Hfedpfxexl D Aws Afien The unit is in excellent working condition and is ready for immediate release. The Pall UF/DF System is a state-of-the-art tangential flow filtration (TFF) skid designed for ultrafiltration and diafiltration (UF/DF) processes in biopharmaceutical manufacturing. This advanced stainless steel unit enables efficient concentration and buffer exchange of biologics such as monoclonal antibodies, recombinant proteins, enzymes, and gene therapy vectors. Engineered by Pall Biotech and manufactured in Germany, this system ensures process reliability, hygiene, and scalability, meeting the rigorous demands of regulated production environments. Ideal for downstream processing in pilot or GMP production, this system features a user-friendly HMI interface, robust control panel, and a fully integrated filtration circuit compatible with single-use or reusable membranes. Key Features GMP-Ready Design – Engineered to support pharmaceutical-grade UF/DF processes. Integrated Touchscreen HMI – For real-time control and monitoring of process parameters. Compact Stainless Steel Skid – Easy to manoeuvre and install in classified cleanroom environments. Automated Operation – Equipped with an intelligent PLC for pressure, flow, and temperature control. Multi-Function System – Supports both ultrafiltration and diafiltration processes. High Purity Tubing & Fittings – Configured with sanitary connections and single-use flexibility. Validated Safety Features – Includes emergency stop button, regulated pressure alarms, and lockable panels. Technical Specifications Parameter Details Manufacturer Pall Biotech (Germany) Year of Manufacture 2020 System Type UF/DF Skid (Ultrafiltration/Diafiltration) Max Allowable Pressure 4 bar (58 psi) Max Operating Temperature 80°C Min Operating Temperature 5°C Control System Touchscreen HMI with integrated PLC Construction 316L Stainless Steel Wheels Lockable castors for mobility CE Marking Yes (Compliant with EU standards) Serial Number Applications Biopharmaceutical Manufacturing – Concentration and buffer exchange for drug substances. Monoclonal Antibody Purification – Clarification and polishing prior to formulation. Gene Therapy & Vaccines – Processing of viral vectors, plasmid DNA, and mRNA. Enzyme and Protein Products – Downstream UF/DF concentration steps. Cell Culture Harvesting – Clarification of lysates and spent media. Formulation – Final buffer exchange before sterile filtration and fill/finish. Benefits Scalable Solution – Suitable for pilot-scale and full production batches. Reliable Filtration – Maintains membrane integrity and product quality. Process Efficiency – Fast changeover with user-friendly operation. High Product Recovery – Designed to minimize hold-up volume and product loss. Validated Platform – Developed by Pall, a global leader in bioprocessing technology.

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Hodpfx Asxl Dy Nsfisfn Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: used, This listing is for a Millipore Pro Flux M30 Tangential Flow Filtration (TFF) System. The unit is in full working condition and is ready for immediate release. The Millipore Pro Flux M30 is a high-performance tangential flow filtration (TFF) system designed for demanding applications in the biotechnology, pharmaceutical, and molecular diagnostics sectors. Optimized for crossflow filtration, the M30 provides reliable separation, concentration, and clarification of biomolecules and cell suspensions in both R&D and process-scale environments. With its robust stainless steel construction, precise transmembrane pressure (TMP) control, and compatibility with a wide range of membrane chemistries, the M30 delivers consistent performance across various filtration tasks—from protein concentration and virus clarification to cell culture harvest and synthetic biology sample prep. Key Features Stainless Steel Construction – Durable, sanitary design for aseptic operation and long-term reliability. Optimized TMP Control – Ensures maximum membrane efficiency and longevity through precise pressure regulation. Broad Membrane Compatibility – Supports a variety of membrane types and molecular weight cut-offs for flexible application use. Process Versatility – Suitable for concentration, diafiltration, and clarification steps in upstream and downstream workflows. Compact & Scalable – Ideal for laboratory-scale operations with scalability to pilot and production environments. User-Friendly Interface – Intuitive controls and gauges for straightforward operation and monitoring. Technical Specifications Model: Pro Flux M30 Flow Configuration: Tangential Flow / Crossflow Material of Construction: 316L Stainless Steel Hedpfx Ajxl Dx Sjfiefn Pump Type: Peristaltic or Diaphragm (depending on setup) Pressure Control: Manual and/or automated transmembrane pressure regulation Operating Pressure Range: Typically up to 4 bar (60 psi) Filter Compatibility: Millipore Pellicon, Ultracel, Durapore, and other cassettes Tubing & Fittings: Sanitary-grade with tri-clamp or Luer lock connections Footprint: Compact benchtop design Manufacturer: Millipore (now part of Merck Millipore) Applications Biopharmaceutical Processing – Protein concentration, buffer exchange, and virus removal. Cell Culture Harvesting – Clarification of cell suspensions post-fermentation or bioreactor. Synthetic Biology – Preparation of cell-free extracts, nucleic acid concentration, and purification. Gene Editing & Molecular Cloning – Sample concentration and buffer exchange before downstream analysis. Diagnostics Manufacturing – Filtration of assay components and reagent prep for diagnostic kits. Fluorescence & Imaging Sample Prep – Ensures clean, debris-free samples for accurate analysis. Benefits Reliable Performance – Delivers consistent and reproducible results for critical bioprocess steps. Process Flexibility – Adaptable to a wide range of biomolecule sizes and sample types. Aseptic Operation – Designed for cleanroom and GMP environments. Low Hold-Up Volume – Minimizes product loss during filtration. Trusted Brand – Developed by Millipore, a global leader in membrane filtration technologies.

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Hfodpjxl Dxlefx Afijn Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance.

Condition: used, This listing is for a Pall Allegro 50 L Standard Mixer and Weigh Platform. The unit is in full working condition and is ready for immediate release. The Pall Allegro 50 L Standard Mixer and Weigh Platform is a robust and versatile solution designed for single-use bioprocessing applications in the pharmaceutical and biotechnology industries. Engineered for consistent mixing performance, this system supports critical upstream and downstream operations including buffer preparation, media mixing, and formulation processes. This platform integrates high-precision weighing functionality with a reliable mixing system, offering enhanced process control in a compact, easy-to-clean stainless steel frame. Its compatibility with Pall Allegro single-use mixers ensures operational flexibility and sterility assurance across various applications. Key Features Integrated Design – Combines mixing and weighing in one streamlined system. Single-Use Compatible – Fully compatible with Pall Allegro 2D mixer bags. High Accuracy Weighing – Precision load cells for reliable mass control and batch documentation. User-Friendly Interface – Easy-to-use control panel with adjustable speed and mixing profiles. Hygienic Construction – Stainless steel frame with smooth surfaces for GMP compliance. Scalable Solution – Ideal for pilot-scale to small-scale commercial production. Technical Specifications Model: Allegro 50 L Standard Mixer & Weigh Platform Mixing Volume: Up to 50 liters Mixer Type: Magnetically driven impeller Platform Material: 304 Stainless Steel Weight Capacity: Up to 100 kg Dimensions (approx.): 600 mm x 600 mm x 1100 mm Power Supply: 100–240 V AC / 50–60 Hz Hfjdpfexl Dpdsx Afijn Control System: Integrated touch screen interface Manufacturer: Pall Corporation Applications Biopharmaceutical Manufacturing – Media and buffer prep, formulation, and hold steps. Clinical Manufacturing – Flexible use in small-scale GMP operations. Vaccine Production – Sterile formulation and component mixing. Gene & Cell Therapy – Supports sterile, closed-system processing. Process Development Labs – Ideal for scaling up single-use technologies. Benefits Sterile Processing – Supports single-use bags to minimize contamination risk. Compact Footprint – Fits easily into lab and production environments. Accurate Dosing – Integrated weigh system for precise process control. Reduced Cleaning Time – No need for CIP/SIP due to disposable mixer bags. Pall Quality – Developed by a trusted leader in bioprocessing technologies.

Condition: used, This listing is for 1 of 2 GE Healthcare ÄKTAprocess Liquid Chromatography System 2020 & 2021. The unit is in full working condition and is ready for immediate release. The GE Healthcare ÄKTAprocess is a fully automated liquid chromatography system designed for process scale-up and large-scale biopharmaceutical manufacturing. With extensive configuration possibilities, it seamlessly transitions processes from small-scale ÄKTAexplorer and ÄKTApilot systems to industrial production. Featuring UNICORN control software, regulatory compliance, and high-performance liquid handling, the ÄKTAprocess is an essential tool for biopharmaceutical production. Key Features: Advanced Automation & Control: Automated Liquid Chromatography System: Ensures precise and reproducible separations. UNICORN Control Software: Provides intuitive process control and monitoring. Post-Purchase Configuration Options: Enhances usability and extends system lifespan. Scalability & Flexibility: Designed for Large-Scale Biomanufacturing: Supports seamless scale-up from lab to production. Customizable Configuration: Thousands of setup possibilities for different applications. Three Flow Rate Ranges: Handles up to 1,800 L/h, enabling high-volume production. Quality & Compliance: Built with USP Class VI Materials: Traceable, regulatory-compliant construction. Intelligent AxiChrom Column Packing: Ensures optimal separation performance. Full Regulatory Documentation & Services: Supports cGMP compliance. Compact & User-Friendly Design: Integrated Computer: Reduces footprint and minimizes plant clutter. Robust & Reliable Construction: Engineered for long-term operation in industrial settings. Specifications: Weight 450 kg (990 lbs) Dimensions (cm) 41L × 33W × 64H Dimensions (in) 16L × 13W × 25H Benefits: Optimized for Bioprocess Scale-Up: Seamlessly transition from small-scale systems. Regulatory Compliance: Supports cGMP requirements with complete documentation. Highly Configurable: Adaptable to diverse biomanufacturing needs. Space-Efficient Design: Built-in computer minimizes workspace requirements. Hedpfx Asxl Dn Hofijfn Applications: The ÄKTAprocess is ideal for biopharmaceutical production, including: Monoclonal Antibody Purification Vaccine Production Recombinant Protein Purification Gene Therapy & Cell Therapy Processing

Condition: good (used), Heraeus Thermo UT 6060 Drying Oven For sale is a used laboratory heating oven from the renowned brand Thermo – type UT 6060, made in Germany. Technical details: Model: UT 6060 Order number: 51014393 Factory number: 40588846 Max. temperature: 300°C Supply voltage: 230V Frequency: 50Hz Hfjdpfoxl Dl Ssx Afion Power consumption: 1.64kW Current consumption: 7.1A Protection class: Class 2 Protection type: IP 20 Temperature protection: DIN 12880/1 Connection type: 1N/PE Origin: Made in Germany (Langenselbold) Condition: Used, fully functional. Externally, it shows slight signs of wear (see pictures). Find more items in other sizes—new and used—in our shop! International shipping available upon request!

Condition: good (used), Heraeus Kendro UT 6120 Drying Oven For sale is a used laboratory heating oven from Kendro Laboratory Products – model UT 6120, manufactured in Hanau, Germany. This unit is ideal for laboratory applications, drying, heating, and material testing up to 300°C. Technical details: Hfedpfx Aoxl A Tbjfijn Model: UT 6120 Order number: 51008822 Factory number: 99108504 Max. temperature: 300 °C Supply voltage: 230 V Frequency: 50 Hz Power consumption: 2.4 kW Current consumption: 10.2 A Protection class: Class 2 Protection type: IP 20 Temperature protection: DIN 12880/1 Connection type: 1N/PE Origin: Made in Germany (Hanau) Condition: Used, with slight signs of wear (see pictures). You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 1996, Rumed Type 3300 Refrigerated Incubator • Manufacturer: Rubarth Apparate GmbH, Laatzen (Germany) • Type: 3300 • Serial number: 72258.4 • Year of manufacture: 1996 • Power: 1.0 kW • Operating voltage: 230 V / 50 Hz • Current consumption: 4.4 A • Refrigerant: R134a • Filling weight: 0.99 kg • Maximum operating pressure: 18 bar • Made in Europe, CE marked Description & Applications: Hodpfjxl Awgox Afiofn The RUMED Type 3300 is a professional refrigerated incubator for laboratory applications. Ideal for: • Microbiological cultivation • Long-term sample storage • Climate-controlled stability tests • Research and development Internal dimensions: W/D/H: 575/550/510 mm Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Heraeus Thermo UT 6200 Drying Oven Hedpfx Asxlrzzofiofn For sale is a used laboratory heating oven from the renowned brand Thermo – type UT 6200, made in Germany. Technical details: Model: UT 6200 Order number: 51001655 Factory number: 8907974 Max. temperature: 300°C Supply voltage: 230V Frequency: 50Hz Power consumption: 2.60kW Current consumption: 11.8A Protection class: Class 3.1 Protection type: IP 20 Temperature protection: DIN 12880/1 Condition: Used, fully functional. Slight signs of wear on the outside (see pictures). You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2006, SpectruMedix RVL 9612 Genetic Analysis System incl. PC and accessories Hfodpfexlrvxex Afien This device is suitable for molecular biology laboratories, research institutions, and universities for genetic analysis (e.g., DNA sequencing, genotyping). Model: RVL 9612 Manufacturer: SpectruMedix LLC, State College, PA, USA Serial Number: 1102 Revision: 2.0 Year of Construction / Date of Manufacture: March 17, 2006 Line Voltage: 115/230V Frequency: 50/60Hz Power Consumption: 3300W Phases: 1 (single-phase operation) Certifications: CE compliant (HCS CE-D) Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Find more items – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Memmert B60 Incubator For sale is a used B60 incubator from Memmert. Technical details: Hjdpoxlq Nksfx Afijfn Manufacturer: Memmert Model: B60 Design: Incubator / Heating Cabinet Temperature range: approx. +10 °C above room temperature up to 70 °C Power: approx. 2000 W (220 V / 50-60 Hz) Areas of application: Laboratory, research, industry, medicine Condition: Used, functional Buy Memmert B60 incubators and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Year of construction: 2009, condition: used, IKA in-line homogenizer model DR2000/30 ATEX Year 2009. Motor 55 kW 1783 rpm. Hfjdpfxjxlng He Afisn With frequency converter. With mechanical seal. Technical specifications Model: DR2000/30 Year of manufacture: 2009 Motor: 55 kW 1783 rpm. ATEX configuration.

Condition: used, functionality: limited functionality, machine/vehicle number: Biocap DNA, Used Captair Biocap DNA UV sterilization cabinet Hsdpsxliivsfx Afiefn Manufacturer: Captair / Erlab Model: BiocapDNA Voltage: 230V (50Hz)

Condition: ready for operation (used), functionality: fully functional, Nitrogen : 30 L/min 6.9 bar - 1.059 CFM 100 psi Min/ Max Operating Temperature : 5ºC - 25ºC / 41ºF - 77ºF Max Relative Humidity : 70% Maximum Altitude : 2000 Meters Pressure Dewpoint : -40ºC / -40ºF Particles : < 0.01 micron Suspended Liquids : None Hodjxlhcbepfx Afisfn Phthalates : None Noise Level : 57 dB(A) Electrical Requirements : 230v 50/60Hz 8.4A Power Consumption 1932 watts Dimensions (cm/ ins) : 95 x 59 x 71 / 37 x 23 x 28 Weight (kg/ lbs) : 145 / 320

Condition: refurbished (used), functionality: fully functional, ACEA xCELLigence RTCA Cardio Parameter Value / Description Application / use Real-time monitoring of cardiomyocyte contractility and viability; cardiotoxicity assessment Well format 96-well (E-Plate Cardio 96) Sampling / temporal resolution Entire 96-well plate read in ≤ 12.9 ms (i.e. ~12.9 ms per full-plate sweep) Impedance measurement accuracy / Accuracy: ±1.5 % (at 1 Ω) (plus some offset) repeatability Repeatability: 0.8 % Impedance dynamic range 20 Ω to 2 kΩ Output test signal 22 mV rms ±20%, with a maximum 5 mV DC offset at 10 kHz (also stated for 10, 25, 50 kHz) Communication interface USB 2.0 (from analyzer to control unit) Hfjdpsxiyfpsfx Afion Power / electrical input (analyzer) 100–250 VAC, 50/60 Hz, 25 W max Physical dimensions / weight (analyzer) ~ 40.0 × 40.0 × 9.2 cm (W × D × H) weight: