Orkoplast d.o.o.

Condition: used, Year of construction: 1991, functionality: fully functional, Ref. No.: Lg 35425 Strip Straightening Machine Dreher 1676 BV Used, in good condition Year of manufacture: 1991 Technical Data Passage width: max. 300 mm Material thickness: 0.8 to 4.0 mm Max. material cross-section: approx. 800 mm² Number of feed rollers: 2 Feed roller diameter: 80 mm Feed roller release: pneumatic Number of straightening rollers: 7 Straightening roller diameter: 80 mm Adjustment of the upper straightening rollers: individually by hand Number of exit rollers: 2 Exit roller diameter: 80 mm Exit roller release: manual Strip speed: approx. 0 to 30 m/min Strip edge guide vertically at the inlet, centrally adjustable. Roller basket at the outlet for strip guidance. Working direction: from right to left. Speed steplessly adjustable via variable speed motor (manual). Loop control via spring switch (start-stop). Lodpfoxn Tqpox Ab Uehn

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Lodpfjxmd S Uox Ab Uohn Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: ready for operation (used), Year of construction: 1998, Pressing force: 5000kN, max. operating pressure: 500bar, portal clearance: 2600mm, opening height: 470mm, max. straightening ram stroke: 500mm, min. edge distance: 375mm, rapid traverse: 450mm/min, straightening speed: 45mm/min, return speed: 1100mm/min, feed rate: 12m/min, max. feed force: 5000kN, table height: 1000mm. Machine dimensions X/Y/Z: approx. 4600mm/3250mm/3250mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Ljdpfx Absxlit Is Uehn

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Ledoxiyx Nepfx Ab Uehn

Condition: used, Year of construction: 2005, For clamping and straightening circular saw blades Circular saw blade diameter: Max. 850 mm Circular saw bore diameter: 22 mm saw blade thickness: Max. 5 mm Working speed: < 10 m/s Hydraulic device: 35 bar Lsdpew U Dvwefx Ab Uohn Connected load: 0.75 kW / 400 V / 50 Hz Dimensions W x D x H approx.: 2080 x 1180 x 1980 mm Weight approx: 450 kg colour: blue

Condition: excellent (used), Year of construction: 2018, operating hours: 2,500 h, Peak Performer 50P.1600 - Pass-through width 1,600 mm - Max. part thickness 0.5–17 mm Lodpfxsw Iy Rws Ab Ushn - Cleaning system For further information, please feel free to contact us.

Condition: ready for operation (used), Afrolmachine 5 ton Middenhoogte: 1300 mm Spoellengte: max. 1100 mm Ledpfx Aowu Inrsb Uehn Decoiler is verplaatsbaar, gemonteerd op chassis Laadwagen is vast gemonteerd op chassis

Condition: good (used), Year of construction: 1991, functionality: fully functional, number of straightening rollers: 9, total length: 1,550 mm, straightening roller diameter: 30 mm, total height: 1,820 mm, total width: 2,500 mm, sheet thickness (max.): 2 mm, Kohler straightening unit 30.180 / 9-300.1 consisting of: Straightening machine KRM 30.180 / 9 Uncoiling reel 300.1 Strip guide Lsdjwrx R Sepfx Ab Ujhn

Condition: excellent (used), roller leveller ARKU RM 1825 with 250 x 2/5 mm, 19 rolls diam. of the rolls 18 mm Lhjdpfx Abowrnpkj Ujn

Condition: good (used), number of straightening rollers: 23, product height (max.): 15 mm, Manufacturer: SCHUBERT Type: WMP 63/600 Year of manufacture: 1974 Total 23 rolls Upper rolls 11 units Lower rolls 12 units Vario speeds 5 - 15 m/min Max. surface torque at 40 kg/mm2 3500/1800 Minimum workpiece length 130 mm Max. roll spacing vertical 16 mm Central lubrication Length infeed table 400 mm Specifications Metric US Standard Roll width 650 mm Sheet thickness at 5 x upper roll Ø 15 mm Upper roll Ø 63 mm Lower roll Ø Lhjdpfx Abewpkxco Uon 63 mm Number of rolls 23 Bending speed 3 - 15 Number of driven rolls 23 Dimensions (estimated) Length 2400 mm Width 2300 mm Height 1900 mm Weight 6000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend you verify all important details.

Condition: used, Year of construction: 1993, Price: On request Coil feed line system, straightener, decoiler Manufacturer: ARKU Year: 1993 Decoiler Type: AH 5000/500/MSG-4Q Capacity: 5000kg Working width: 50-500mm Speed: 50 m/min Max coil-diameter: 1800mm Straightener Type: RM 3060.4/9 Number of rolls: 9 Diameter rolls: 30 Capacity: 0,5-6mm Working width: 50-600mm Speed: 50 m/min Needs new PLC (controller in cabinet). Is taken by previous owner for programm. - Year: 1993 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ljdpfx Aewng Ukob Ushn Lukas van Rossum

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, number of straightening rollers: 23, product height (max.): 7 mm, straightening roller diameter: 30 mm, product width (max.): 630 mm, TECHNICAL DETAILS Material width: 630 mm Material thickness: max. 7.00 mm Sheet thickness: min. 0.30 mm Workpiece dimensions: min. 50 mm Leveling unit Number of leveling rollers: 23 Leveling roller diameter: approx. 30 mm Frame clearance: approx. 650 mm Max. vertical roller spacing: 7.50 mm Performance and speed Speed: 10 m/min Total power requirement: 5.50 kW Lhsdpfx Abswa Tzns Ujn Main drive motor: 4 kW MACHINE DETAILS Machine weight: approx. 6.00 t Space requirement: approx. 2.65 × 1.80 × 1.50 m EQUIPMENT - Infeed with conveyor belt, speed-regulating - Hydraulic roller mill ventilation - Automatic Oil lubrication of transmissions and drive shafts - Digital measuring device for monitoring

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Lhsdpfjv Tpv Njx Ab Ujn Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: ready for operation (used), (Merk is oorspronkelijk Georg Fischer, overgenomen door Hämmerle AG) Compacte machine van Zwitserse makelij die gebruikmaakt van een automatisch nivelleringsdruksysteem om onderdelen recht te zetten en spanningsvrij te maken. Toepassingen: fijngestanste onderdelen - koppelingsplaten - remschijven - zaagbladen - vliegtuigonderdelen - laser- en plasmagesneden onderdelen - vlakmaken van onderdelen vooraf aan robotlassen/-slijpen. - voorkomen doorbuiging met 19 teruglopende rollen - 11 tegenrollen in onderste positie - 10 tegenrollen in overwegend positie - boven- en onderrollen zijn voorzien van hydraulische motoraandrijvingen - overbelastingsventielen voorkomen schade aan de machinedeur, overbelasting of verkeerde instelling - snelle insteltijd, vereist invoer van 3 parameters (ingangsspleet - uitgangsspleet - invoersnelheid) - snelheid van de machine: 2-20 m/min maximale breedte: 750 mm maximale dikte: 12 mm min. onderdeellengte: 100 mm vermogen: 31kW totaalgewicht: 10 ton Lhsdpfov Rwcrex Ab Ujn

Condition: used, Year of construction: 2001, material width 400 mm Lhodpfovzxqfsx Ab Ujn material thickness 0,7 - 4,2 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of draw-in rolls 2 + 2 diameter of draw-in rolls 80 mm speed 18 m/min power capacity 2,5 kW weight 0,8 t Dimensions (WxDxH) 1,0 x 1,3 x 1,5 m with motor driven, with coil loop control via contact plate, roll adjustment separately manual

Condition: used, material width 250 mm Lodpfx Asvzxn Reb Ushn material thickness 0,5 - 4,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm number of draw-in rolls 2 power requirement 3,8 kW Weight 0,8 t Dimensions (WxDxH) 1,6 x 0,8 x 1,5 m with infinitely variable drive

Condition: used, material width 210 mm no. of straightening rolls 6 straightening roll diameter 40 mm Ledpfevzxndjx Ab Ushn dimensions (WxDxH) 0,45 x 0,6 x 1,1 m Straightening device with height adjustment of base frame

Condition: used, Year of construction: 1970, material width 200 mm material thickness 0,5 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 Lodevzxm Hspfx Ab Uohn diameter of draw-in rolls 160 mm power requirement 3,1 kW weight 1,1 t dimensions (WxDxH) 1,5 x 1,2 x 1,9 m as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1966, 5 weight 5 t Lhsdpfx Ajvu Hkaeb Ujn .

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm number of draw-in rolls 2 diameter of draw-in rolls 80 mm material cross-cut 600 mm² material thickness at 500 mm material width 1,2 mm Lhedpjvuum Nefx Ab Ujn material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t dimensions (WxDxH) 1,5 x 1,5 x 1,9 m with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m with infinitely variable drive, material inlet inclineable, straightening rolls individually manually adjustable, pneumatic opening of the upper roller cassette, coil loop control via arm as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request Lhjdpfovuk Sbjx Ab Uen

Condition: used, Year of construction: 1983, material width 200 mm material thickness 0,8 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 53 mm number of draw-in rolls 2 Lhjdevuk R Ropfx Ab Uon diameter of draw-in rolls 96 mm material cross-cut 400 mm² speed 3 - 15 m/min power capacity 0,75 kW weight 0,5 t Dimensions (WxDxH) 1,0 x 1,0 x 1,4 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1990, material width 150 mm material thickness 0,5 - 5,0 mm no. of straightening rolls 7 straightening roll diameter 45 mm number of draw-in rolls 2 inlet roll diameter 72 mm material thickness / at material width 3,0 / 150 mm material thickness / at material width 4,0 / 120 mm material thickness / at material width 5,0 / 80 mm power requirement 3,0 kW weight of the machine 0,7 t dimensions (WxDxH) 1,3 x 1,1 x 1,6 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control via light barriers Lhodpjvuk N Hsfx Ab Usn can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1982, material width 250 mm material thickness 0,4 - 5,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm speed 3 - 15 m/min material thickness at 250 mm material width 3,5 mm material thickness at 100 mm material width 5,0 mm power requirement 1,8 kW weight 0,9 t dimensions (LxWxH) 1,45 x 1,4 x 1,55 m with infinitely variable drive, centralized adjustment of the straightening rolls, indication via dial gauges, support of the levelling rolls, coil loop control via proximity switch material thickness 3,5 mm at material width 250 mm material thickness 5,0 mm at material width 100 mm can be inspected in running condition in our warehouse Lhjdpfovuk Nysx Ab Ujn

Condition: refurbished (used), Tube Straightener VRM60/75, made by KIESERLING Tube diameter : 8 – 60 or 14 - 75 mm Tube length : Depending on accessories (loading table, channels). Minimum 0.5m The ratio diameter/thickness depends on the yield. Strength Example: Ledpjvtpghsfx Ab Uohn - 300 N/mm2 = Max. 6.5mm - 400 N/mm2 = Max. 5.7mm - 500 N/mm2 = Max. 5.1mm - 600 N/mm2 = Max. 4.7mm *The first 4 photos are examples of revamping of similar machines that we can offer in case of interest. The following are pictures of the machine in its current state. Tube diameter: 8 – 60 or 14 - 75 mm Tube length: Depending on accessories (loading table, channels). Minimum 0.5m