Georg Schröder Maschinenbau GmbH

Condition: new, Year of construction: 2026, coil weight: 5,000 kg, coil inner diameter: 510 mm, coil width: 1,250 mm, load capacity: 5,000 kg, Uncoiler, 5 tons capacity. Prjdo Afhhzspfx Apdjc

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 5,000 kg, coil outer diameter: 520 mm, coil inner diameter: 470 mm, warranty duration: 12 months, coil width: 1,250 mm, total height: 1,800 mm, total length: 3,000 mm, total width: 1,500 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 3,000 kg, 5-ton hydraulic coil unwinder for a coil width of 1250 mm, equipped with a remote control unit. Prjdpfx Ao Afdp Iopdsc

Condition: used, Manufacturer: UNIMAN Load capacity: 9000 kg Pedpfxe Adqbhj Apderc Travel range: 400–2050 mm

Condition: used, Year of construction: 1984, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Material data Material width: 350 mm Coil weight: 1 t Material thickness: 0.5–6 mm Coil inner diameter: 380–540 mm Coil outer diameter: 1,500 mm Straightening machine Number of straightening rollers: 9 Straightening roller diameter: 30 mm Number of feed rollers: 2 Weight of straightening machine: 2 t Dimensions of straightening machine Width: 2.0 m Depth: 2.0 m Height: 1.9 m Coil winder Weight of coil winder: 1.3 t Predpo Aaz T Tsfx Apdec Dimensions of coil winder Width: 1.7 m Depth: 1.5 m Height: 1.6 m EQUIPMENT Straightening machine Coil winder

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,000 kg, COMPLETE FEEDING LINE 3v1 UNCOILER + STRAIGHTENER + FEEDER Type CR-AP 400 Year 2013 width = 400 mm thickness minimal 0,5 mm thickness max = 3,0 mm 9+2 straightener rollers UNCOILER: model SM15 Year 2013, motorized, hydraulic expansion pressure arm coil width 400 mm Decoiler capacity 1500 kg The feeding straightener straightens the material and feeds it into the press. The "CR AP" series features an opening head for easier roller cleaning and pilot release. This type of machine is suitable for working with medium-thickness strips. Prodpfsz S T Sgox Apdec

Condition: good (used), Year of construction: 1988, functionality: limited functionality, outer diameter: 2,000 mm, total height: 2,500 mm, total length: 5,200 mm, total width: 1,800 mm, inner diameter: 560 mm, overall weight: 5,000 kg, Equipment: documentation/manual, Max. load capacity – 10 t Strip width – max. 1600 mm Spreading – hydraulic, with adjustable pressure Spreading range – 460 – 520 mm; with extension jaws, expandable to 560 – 620 mm Unwinding speed – 30 m/min Strip guide rods – adjustable up to 2000 mm passage width Braking system – pneumatic; brake for mandrel and brake disc (Snout-Stop) with 3 brake pistons Hydraulic pressure roller – can be moved forwards and backwards Unwinding unit – can be moved by 2300 mm (for positioning) Travel path – limit switch on the reel and adjustable cams on the frame Lifting table – 400 mm stroke; with inclined supports for coil and tilting operations Predpfx Apez Ri Arodjc Coil material (tensile strength) – max. 470 N/mm² Sheet thickness – 0.5 – 3 mm Dimensions (L x W x H) – 5.2 x 1.8 x 2.5 m Documents/drawings – winding machine, unwinder, pressure roller unit, lifting table More information available upon request.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, outer diameter: 1,600 mm, total height: 1,600 mm, total length: 1,400 mm, total width: 800 mm, inner diameter: 470 mm, input voltage: 400 V, overall weight: 850 kg, Equipment: documentation/manual, Year of manufacture: 2009 Load capacity: 1500 kg Psdoz Riz Ijpfx Apderc Coil inner diameter: 470 - 630 mm Coil outer diameter: 1600 mm Speed: 12 revolutions/min Frequency inverter Dimensions: approx. 1.7 x 1.4 x 1.7 m Weight: 850 kg Original documentation included, ready for immediate use.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 90387, overall weight: 1,500 kg, Kohler KRM 18.180/19 Precision Strip Straightening Machine with Double Decoiler Kohler Richttechnik precision roller straightening machine with a double decoiler, built in West Germany in 1990. The line is designed for straightening narrow steel strip, such as bandsaw blade material, and runs from left to right at up to 60 m/min. Strip speed is controlled automatically by a light curtain (loop control), so the decoiler and straightener stay synchronised. The straightener has 19 rolls of 18 mm diameter. Both roll stands are adjusted by motor, and a Kohler digital measuring unit with a keypad allows exact, repeatable roll positioning. The operator panel includes decoiler forward, reverse and stop, a speed potentiometer, key switches to open and close the straightening rolls, oil level control, motor temperature monitoring, and setup and automatic modes. TECHNICAL SPECIFICATIONS Manufacturer: Kohler Richttechnik Model: KRM 18.180/19 Serial number: 90388 Year of manufacture: 1990 Strip width: 180 mm (please verify; 120 mm per manual) Straightening rolls: 19 pcs, Ø 18 mm Max. straightenable cross-section: 250 mm² Working direction: left to right Strip speed: 0–60 m/min, stepless Speed control: light curtain (loop control) Measuring system: digital, Kohler display with keypad Roll stand adjustment: motorised (2× SEW R302 DT71 D8/2, 0.06/0.25 kW) Entry guide: manual side adjustment Quick-change device: manual Main drive: Lenze GFQT 80-24, 4.2 kW at 3000 rpm Oil pump: AEG AM56 KY4, 0.06 kW Connected load: 6 kW Power supply: 380 V / 50 Hz Prodpfxez E Smhe Apdoc Decoiler: double Documentation: original manual available Made in West Germany Condition: Complete and available for inspection under power. On stock more stamping eqipment from brands: Bruderer, bihler, mabu, Schaal, Soprem, Noxon, Huras...

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Psdpfx Apozzrutjderc Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, Year of construction: 1987, Uncoiler manufactured by DREHER, type 2380 F-FPS. Press force approximately --- tons. Year of manufacture 1994. Summary provided – a full technical translation will follow if required for this lot. Podezynmvopfx Apdorc

Condition: used, Year of construction: 1993, Uncoiler manufactured by ARKU, type AH 2000/M. Press force approximately --- tons. Year of manufacture 1993. Structured summary – a full technical translation will follow if required for this lot. Predpozym Ewjfx Apdoc

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm 11-roller straightening unit Roller diameter 60 mm 2 feed rollers 2 exit rollers Predpfx Aszycq Ajpdoc

Condition: used, Year of construction: 2023, Used for the production of refrigerator door panels. Line Specifications: Manufacturer: MAS AUTOMAZIONI SRL Year of manufacture: 2023 Electrical supply: 400 V (±10%), 50 Hz Compressed air: 4.5-6 bar, dew point +5°C Cycle time: 10 seconds Changeover time: Automatic Line dimensions: 38.1 m (L) × 9.6 m (W) × 4.4 m (H) Sheet dimensions: Length: 400-2200 mm (±1 mm) Width: 650-900 mm (±1 mm) Thickness: 0.35-0.55 mm (±0.04 mm) The metal sheet forming line consists of: Sheet loading with measuring laser sensors. Punching and bending station with 2 sets of bending blades for different shapes. 2 available spaces for additional bending or forming stations. 2nd punching stations. Total number of pieces produced to date: 89,963. 2 scrap conveyors. Prjdpszummqofx Apdjc Siemens S7 control system.

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Podpfx Aezrpu Sspdorc Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device Psdpfx Aozrpu Eopderc - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 Predpfozrpr Djx Apdec with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t Pedpfezrprwex Apdorc coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1997, material width 820 mm coil weight 7,5 t material thickness 0,8 - 5,0 mm coil internal diameter 470 - 520 mm coil external diameter 1600 mm material cross-cut 1600 mm² no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min Decoiler HH 7500.1 with: - hydraulic expansion and automatic re-tensioning - material centre adjustment - adjustable pneumatic disc brake - counter-holder with quick clamping - circular guard ring - fixed coil loading chair Insertion aid consisting of: - snubber roll (driven) - infeed wedge - hold-down roll Pjdpfszrpp Asx Apdsrc Straightening machine BRM 50/820.7 with: - automatic circular oil lubrication of the cardan shafts - torque-dependent overload protection - motoric roller cassette adjustment with digital display - quick-change device of the cardan shafts - quick-change device of the straightening rolls Transfer table + ultrasonic control BÜU-5 with: - loop control via ultrasonic sensor (analogue) - strip sag monitoring (min/max) - strip end monitoring

Condition: used, Year of construction: 1994, material width 500 mm coil weight 3,0 t material thickness 0,2 - 2,5 mm Podpfx Aezrppijpderc coil internal diameter 470 - 530 mm coil external diameter 1400 mm no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t - Straightening machine RYD 40 x 500 with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket - Decoiler DY 500 x 3000 with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Podozpbazjpfx Apderc Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Pjdpfezmv Dvox Apderc Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.

Condition: used, Arku TRM 50125/21 Sheet Straightening Machine Prjdpfx Apezlyruedjc We offer the equipment as follows: Straightening machine optional: Foiling machine 2x deposit tables with vacuum lifter Roller conveyor tables 1x staircase transition

Condition: good (used), Year of construction: 2003, functionality: fully functional, SOPREM Precision Coil Feeding Line (Decoiler + Straightener) — 2003. Complete matched feeding line for thin precision strip, ready to pair with a small high-speed stamping press. Decoiler — Type H1000.1000ZV. Max coil weight: 1000 kg. Coil Ø: 1000 mm outer / 375–520 mm inner. Reel speed: 2–20 rpm, 1.5 kW drive. Straightener — Type BR 19 . 160 . 12 . U . Strip capacity: up to 0.5 mm thick × 160 mm wide. Hydraulically driven precision straightening unit. Both units built 2003 · 400 V / 50 Hz · synchronized line with E-stop interlink to downstream press · Made in Switzerland. Technical Specifications Decoiler / Coil Reel (Haspel) H1000 / 1000ZV / 10M / LK.LF / N1 / G Serial No. (nameplate): 110103 Max coil weight: 1000 kg Coil outer Ø: max 1000 mm Coil inner Ø: 375–520 mm Reel speed: 2–20 rpm Motor: KSMV 90L (4), 1.5 kW, 1400 rpm Gearbox: RMI 110 FL LCB, ratio i = 70 Prjdpfxjzav H Sj Apdec Slip clutch: set to 400 Nm Strip sensing: floor contact plate (loop control) Precision Band Straightener (Richtwerk) BR19.160.12.U Function: straightens coil curvature before the press Max strip thickness: 0.5 mm Max strip width: 160 mm Drive: hydraulically driven precision straightening unit Electrical Supply 400 VAC, 50 Hz, 3-phase + neutral + earth Rating: 25 A pre-fuse

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Main Features • Hydraulic cross-cut shear • Hydraulic drive • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines • Safety system • Integrated into the line control system • Designed in compliance with CE standards Predjy Edlhepfx Apdec Work Materials • Carbon steel • Stainless steel • Aluminum and light alloys Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Feeder/Uncoiler/Straightener LARA DEMAE-10000/100/1400-D – Year 2018 Inspected and ready for production. Complete coil feeding system integrating uncoiling, straightening, and servo-driven feeding in a single compact unit. Engineered for continuous operation in cut-to-length, stamping, or deep-drawing lines, offering high precision and reliability. Robust equipment, ideal for processing carbon steel, stainless steel, and aluminum. Main Components • Powered hydraulic decoiler Pedpfxsy Edfze Apdsrc  Capable of handling heavy coils  Motorized coil loading car for rapid coil changeovers  Loop control via laser sensor  Protected loading area with safety barriers, ensuring excellent process visibility • Combined straightener-feeder  Head equipped with 11 straightening and feed rollers  AC servomotor with PLC control + touch HMI  Automatic threading and de-clamping functions to facilitate strip insertion • Integrated electrical and hydraulic systems  Independent electrical cabinet  Precise advancement control and synchronization with downstream equipment Key Technical Data  Maximum strip width: 1,400 mm  Sheet thickness: up to 3 mm (carbon steel / aluminum) up to 1.5 mm (stainless steel)  Power supply: 400 V / 50 Hz  Hydraulic pressure: up to 130 bar