Inter Imex Service en Onderhoud

Condition: used, Geka Hydracrop HYD-50, 50/N Hydraulic Steelworker (includes punches and Dies) Lodpfx Afjzpan Rjtsrp 50 Tonne Pressure. Max Punch Ø28mm through Max 13mm Thickness. Plate Shear Approx 200mm x 20mm. Round Bar/Square Bar 40mm. Foot Control. S/No. 6334. Includes Quantity of Punches & Accessories. 415 Volt Power Supply, 3 Phase.

Condition: new, functionality: fully functional, Year of construction: 2026, (Punching) Max. punch diameter x plate thickness: 34 x 26 mm / 55 x 16 mm Stroke length: 80 mm Throat depth: 405 mm Working height: 1070 mm Bar shear Round/Square: 55 / 50 mm Working height: 1250 – 1160 mm Angle shear (90°): 160 x 160 x 16 mm Angle shear (45°): 80 x 8 mm Working height: 1190 mm Flat bar shear: 380 x 25 mm ; 600 x 15 mm Blade length: 610 mm Miter cutting (vagy: Angle cutting): 120 x 12 mm Working height: 905 mm Notcher material thickness: 13 mm Width: 60 mm Depth: 100 mm Working height: 940 mm Lrsdpfjzmh Duex Aftop Motor power: 11 kW Punching force (vagy: Pressing force): 115 t Length: 2045 mm Height: 2030 mm Width: 770 mm Working height: 1070 mm Weight: 3150 kgs

Condition: good (used), functionality: fully functional, Year of construction: 1988, Profile steel shears Peddinghaus Peddycut 275, 6-way combination Immediately available ex works: Profile steel shears Peddinghaus Type Peddycut 275 Year of manufacture 1987 Pressing force 27 tons Table 400 x 250 mm Lsdpezkg Rnefx Aftsrp Overhang 90 mm Capacity 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square steel 25 mm Blade length 175 mm Punch stroke 24 mm Pierces 20 mm holes in 19 mm or 30 mm thick sheet metal Foot switch Bobmewfdbpsm Av Euedc Various punch dies Transport: ex works

Condition: good (used), punching pressure 60.0 t punching cross-cut in cmm 31 in 15 mm square edge steel 40.0 mm L-beam 160 x 80 mm flat steel 400 x 16 mm throat 400 mm round bar steel 40.0 mm total power requirement 5.5 kW weight of the machine ca. 1.950 kg dimensions of the machine ca. 1700 x 1050 x 1980 mm good / well-maintained condition (!!) Features: - Stop / support table at the punching station - Support table at the notching station Lrjdpfszkbnnjx Aftop - Flat steel blade, 375 mm long, with four cutting edges, - also for cutting angle iron at 45° - Material support table with stop bar on the flat steel shears - Section steel blade for cutting 90° angle steel as well as round and square steel - Scraper, swiveling - Square notching device with stop table - 2 foot switches and electrical controls - Connector for external engagement - Integrated hydraulic power unit - Three-phase motor, 400 volts, 50 Hz - Various insert tools such as punches and dies

Condition: good (used), End Roller Stands, Manufacturer: Peddinghaus Height adjustable from 0.68 m to 1.1 m 2 rollers, total width: 260 mm Roller diameter: 108 mm Tube diameter (top – bottom): 70 mm – 90 mm Base plate diameter: 500 mm Lodjzgihnopfx Aftsrp Approximate weight: 40 kg

Condition: used, Year of construction: 1990, 50 t. weight 1,8 t hydraulic ja Lodpfx Afozf Nuroterp round bar steel 40 mm

Condition: used, puncher 70.0 t round bar steel 45.0 mm square edge steel 45.0 x 45.0 mm L-beam 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.) Ø 27.0 x 20 mm shear: flat material 450 x 15 / 300 x 20 mm throat 300 mm work stroke 70.0 mm work height max. 1095 mm total power requirement 9.0 kW weight 1925 kg range L-W-H 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on request Lredpfx Afjy Uy Siotsp Equipment: - electro-hydraulic profile steel shears with 4x work stations * flat steel shears * profile steel shears * hole punch * notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripper - side storage options - 2x freely movable foot switches - operating instructions (PDF)

Condition: new, Year of construction: 2024, The machine is equipped with 5 workstations: • Punching station • Flat steel shear • Angle steel shear • Notching station • Bar steel shear (round and square) Lodpfx Aey T N Uksftorp Technical Data Strokes per minute at 20 mm stroke: 37 /min Throat depth: 500 mm Punching force: 550 kN Hole diameter and thickness up to max.: 40×10 mm or 20x20 mm Flat steel up to max.: 300×15 or 200×20 mm Angle steel 90° up to max.: 130x130x13 mm Angle steel 45° up to max.: 70x70x7 mm Bar steel up to max.: 40 mm Square steel up to max.: 40 mm Notching up to max.: 10 mm

Condition: as good as new (ex-display), Year of construction: 2026, Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm Lredpey T N Udsfx Aftop 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: as good as new (ex-display), Year of construction: 2026, Incl. control for entering the bending angle. Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Lrjdpfsy T N T Hex Aftop Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: good (used), Year of construction: 1994, machine/vehicle number: 4422550994025, Offer 26088 Hydraulic Profile and Bar Shear with Notching Device and Punching Unit Technical Data: - Flat Bar Shear - Flat steel: 400 x 16 mm - or: 300 x 18 mm - Section Steel Shear - L- and T-iron at 90°: 130 x 12 mm - Square bar / round bar: 40 / 40 mm - Notching Unit - With square notcher for sheet metal up to approx. 13 mm - Notch depth approx.: 70 mm - Notch width approx.: 52 mm Lredpfx Ajy Nk Rloftop - Punching Unit - Punching force approx.: 60 t - Throat depth: 400 mm - Stroke approx.: 10 to 50 mm - Punches steel up to Ø 31 in 15 mm - Electrical contact stop - Various punch dies and matrices - Drive: 400 V / 5.5 kW - Space requirement: W 1100 x H 2000 x D 1700 mm - Weight approx.: 2100 kg

Condition: like new (used), Year of construction: 2012, round bar steel 45 mm square edge steel 45 mm L-beam 120 x120 x 12 mm total power requirement 5,5 kW Ljdpfxoy Hxq Is Afterp weight of the machine ca. 1600 kg dimensions of the machine ca. 1700 x 950 x 1900 m

Condition: good (used), Muhr + Bender KBL 16 Optima Muhr und Bender Optima KBL 16 Round steel 45 mm Square steel 42 mm Angle steel 90×9 mm Lrjdpeyy S E Sjfx Aftop Throat depth of punch 500 mm

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Lredjyxpawepfx Aftop Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: used, Year of construction: 1990, Gebruikte ponsmachine van Kingsland Lredpsyu Sqiofx Aftep Type: 55 P 625 Capaciteit: 55 ton Keeldiepte: 625 mm Bouwjaar: 1990

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, controller manufacturer: GEKA, stroke rate (min.): 37 1/min, stroke adjustment: 60 mm, throat depth: 500 mm, punching force: 55 t, punching diameter: 100 mm, cutting range flat at 45° (X-axis): 300 mm, working height: 1,085 mm, oil tank capacity: 80 l, overall weight: 1,750 kg, total length: 2,100 mm, total width: 1,160 mm, total height: 2,090 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, notching unit, GEKA HYDRACROP 55 SD – Universal Ironworker | 360° | Ø100 mm Bending Station For sale: professional dual-cylinder universal ironworker from the renowned Spanish manufacturer GEKA, model Hydracrop 55 SD. The machine is in excellent technical condition, ready for immediate operation in demanding industrial environments. WHAT SETS THIS UNIT APART? Lrodpfx Aeyricdsftsp Full 360° Mobility: The machine is mounted on a special rotary bearing, enabling complete 360-degree rotation. This feature is invaluable for processing long flat bars or profiles in smaller workshops. SD Version (Extended): The throat depth is an impressive 500 mm, allowing work with very wide sheet metal panels. Extreme Punching: The machine is equipped with an attachment for punching holes up to Ø100 mm. Additional Bending Station: Includes a professional flat bar bending station, making this machine a versatile metalworking center. TECHNICAL DATA: - Punching force: 55 tons (550 kN) - Number of cylinders: 2 (enabling operation by two users at different stations simultaneously) - Number of workstations: 5 (punching, angle shearing, flat bar shearing, round/square bar shearing, notching) - Max. sheet thickness: 20 mm - Angle cutting at 90°: 120 x 120 x 10 mm - Motor power: 5 kW - Stroke rate: 37/min - Weight: approx. 1,750 kg EQUIPMENT & BENEFITS: - Control system: Intuitive foot pedal control with “Touch & Cut” function (electric back gauge) - Safety: Emergency stop, full CE marking, and complete technical documentation (DTR) - Condition: Well-maintained machine, regularly serviced, with all measurements and operating parameters perfect.

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Notching unit with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm Lodex Symnopfx Aftjrp or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down - tool package Validity of safety inspection until Feb. 2026

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used punching and shearing machine from Peddinghaus Lrodpfjx Iicwsx Aftop Model: Peddimaster 110/170 Punching capacity: 110 tons Shearing capacity: 170 tons Includes side stop and various tools

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Lredpfxoxp Ndhj Aftsp Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, pressure 60,0 t square edge steel 35,0 mm L-beam 120x120x12 mm round bar steel 40,0 mm punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm throat 220 mm flat steel 200x20 / 300x15 mm blade length 317 mm oil volume 45,0 ltr. work height max. 940 / 1140 mm strokes per minute max. 26 work stroke 55,0 mm total power requirement 4,0 kW weight of the machine ca. 1425 kg. Dimensions (HxWxD) 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration Lsdpfx Aexcuxqsfterp + MUBEA - punch and die holder

Condition: new, Year of construction: 2025, neu 2025 090054 prompt, Zwischenverkauf v Spanien Lrsdpfx Afowirxwstsp 17300 € 298.94 € 1 15570 € 55 to 250 mm 5 40/10 mm 20 mm 37 1/min 300x15 mm 120x10 mm 40 mm 10 mm 5 kW 1670 mm 1160 mm 2090 mm 1390 kg 2 foot pedal for independent working on 2 stations flatsteel station anglesteel station round- and square steel station rectangular notching station punching station table on flat steel station table on punching station table on notching station complete with hydraulic oil user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, Year of construction: 2026, neu 2026 090194 prompt, Zwischenverkauf v Lrjdpswirnxefx Aftep Spanien 22400 € 430.08 € 1 1 60 to 250 mm 5 40 x 11 mm 32 1/min 350 x 15 mm 120 x 10 mm 45 / 40 mm 10 mm max. 150x10 mm 5.5 kW 1850 mm 1300 mm 2100 mm 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 19600 € 376.32 € 55 to 500 mm 5 Lrjdpfxowirgbs Aftep 40/10 bzw. 20/20 mm 20 mm 37 1/min 300x15 / 200x20 mm 10x42x90 mm 5 kW 2100 mm 1160 mm 2090 mm 1750 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, Ankörnvorrichtung oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, Year of construction: 2026, neu 2026 090222 September 2026, Zwischenv Spanien 15800 € 303.36 € 1 50 to 177 mm 5 1 31 x 12 mm 34 1/min 350 x 15 mm 80 x 8 mm 35 / 30 mm 10 mm 100 x 10 mm 3 kW 1300 mm 1100 mm 1850 mm 950 kg with bending station capacity 50 to 5 working stations Lsdpfx Aswirahjfterp flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 24800 € 476.16 € 60 to 500 mm 5 2 40x11 mm 32 1/min 350x10 mm 120x10 mm 45/40 mm 100x10 mm 150x10 mm 5.5 kW 2100 mm 1400 mm 2060 mm 1750 kg 5 workstations foot pedal trigger hydr. drive flat steel shears incl. Device for reducing the deformation angle iron scissors with round and square bar opening triangle claw punching and bending device for flat iron table at the flat steel and notching station user manual in GERMAN and ENGLISH Lrsdpfjwiq Evsx Aftep