ST-Electronics

Condition: ready for operation (used), chuck outer diameter: 2,000 mm, net weight: 30,000 kg, Verticale open zijboor- en draaibank Beweegbare hoofdkolom: 1000 mm Max. dia (voor het draaien van de flens) vanaf het midden: 2700 mm Max turningdia -- passage: 4000 mm Power on the spindle: 30 kW Max longitudinal travel X-axis: 1350 mm Itsljwda Snshccqksf Max hight of workpiece Z-axis: 1800 mm Number of speeds: 1,4 > 120 rpm Long: 5350 mm Wide: 6200 mm

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) Itolhcewcznuscqkef With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: excellent (used), Functionality: fully functional, WORKING CAPACITY Platform diameter 2000 mm Max workpiece diameter 2300 mm Islhccewcyqnsqketf Max tuning diameter 2200 mm Max turning height 1500 mm Max workpiece weight 15000 Kg MAIN SPINDLE Platform diameter 2000 mm Max rotation speed 160 rpm Capacity 15000 kg Max power 70 kW Cross spindle stroke (Y) 1250 mm CROSSRAIL Vertical stroke (W) 1000 mm CARRIAGE 2 Vertical stroke (Z2) 850 mm Turret positions 4 CARRIAGE Vertical stroke (Z) 1000 mm Cross stroke (X) 1250 mm EXTRA Transom cabinet Yes Machine total weight 40000 kg The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Additional Equipment Number of tool holders: 12 Tool holders according to DIN69880 VDI 40 Number of driven stations: 12 This 3-axis EMCO VT 400 vertical turning machine was manufactured in 2014. It offers robust construction and precision turning capabilities, ideal for various industrial applications. Consider the opportunity to buy this EMCO VT 400 vertical turning machine. Contact us for more information. Application Types Turning Islhewcht Dsccqkstf

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET 12 driven stations Ijlhcowcdytscqketf VDI 40 chuck Speed 0-4,000 rpm Parts feeding via shuttle (included) Two machines are available

Condition: used, Year of construction: 1980, turning dia. 2500 mm Itslhccjwb A H Aoqksf

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Manufacturer: EMAG Ielhccowbqnusqkjtf Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction chip conveyor Further information will follow

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, General Data Machine weight 6000 kg Main Drive Number of axis 3 Media Main electronic connection 40 kVA This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Application Types Iteljwbk U Ijhccqkjf Turning

Condition: used, Year of construction: 2021, turning diameter 400 mm turning height 300 mm swing diameter 520 mm workpiece weight 60 kg x-axis 995 mm y-axis +/-30 mm z-axis 580 mm chucking diameter max. 500 mm Tool drive speed max. 6.000 1/min Main spindle drive power 37 KW tool turret with 12 work positions BMT75 total power requirement 55 kW weight of the machine ca. 13,5 t Circulating workpiece transport system, O-design Drag frame system for 10 workpieces Coolant supply: 15 bar Coolant pump with a flow rate of approx. 80 l/min at 15 bar. Ijlhjwbiztjccqketf Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Dual coolant filter, manually switchable Filter mesh 100 µm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt design: to the rear Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l) Emulsion mist extraction: Extraction capacity approx. 800 m3/h Flushing gun Workpiece measurement with measuring probe Blow-off measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA Axial drilling and milling head - BMT75 CC 5x 90° angle drilling and milling heads - BMT75 CC (i=1:1) Tool set for OP10 + OP20 Hydraulic full clamping cylinder size 150 - with 1 media feed-through Max. tensile force 10,850 daN at 70 bar Coolant through the spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change Max. = 2,200 rpm (standard speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 External finishing cutter 1x 8.BMT25VL8IKX50 External roughing cutter 1x 60.7516VL8IKDI15 Engraving tool 1x 60.7516VL8IKDI15 Tapping chuck 1x 40.75V5KRVL8IKD 50mm cutter head 3x 80.75V5VL8IKD boring bar holder 2x 27.V520HYDL26 drill bits, 20mm diameter 1x 42.V522L08Ik drill bits, 22mm diameter 1x 27.V514WNL31 Drill Bit Diameter 14mm Software Package Operating Instructions / Maintenance Manual

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, CNC Control Siemens Sinumerik Control 840 D CNC Control Type Siemens Turning Dia 160 mm Itjlhcowa U Upjcqkjf Chuck Size 215 mm X-axis Travel 280 mm Spindle Speed (rpm) 4,500 RPM Live Tooling Yes Machine Dimensions 3,099 x 2,515 x 2,997 mm Machine Weight 11,000 kg Max peak distance – 737 mm Max feed force X/Y (40% CDF) – 10/8 kN Working stroke X/Y – 280 mm / 1.14 mm Max process speed X/Y – 30/60 m/min Ball screw diameter X1/Z1 – 40 mm / 40 mm Number of tools – 12 (2x) Tool holder – VDI 40 Spindle bearing diameter – 89 mm Spindle flange – A6 Rated Speed – 1,500 RPM

Condition: good (used), Year of construction: 2017, operating hours: 20,995 h, Functionality: fully functional, machine/vehicle number: W11106617/144, Grinding machine for internal and external grinding up to 1 m between centers Out-of-round grinding of crankshafts Itjlhccqjwa T Eyjkof

Condition: excellent (used), CNC Control 32i-Model B CNC Control Type Fanuc Turning Diameter: 17.72″ Chuck Size: 23.6″ Spindle Speed: Up to 3500 RPM Dimensions: 118 x 75 x 102 inches Weight: 24,251 lbs Max Process Speed: 30 m/min Ball Screw Diameter: X1=1.6″, Z1=1.6″ Number of Tools: 12 Tool Holder: VD140/50 Tool Flight Circle: 24.4″ Spindle Bearing Diameter: 5.9″ Drive Power: 52 kW (100% CDF), 67 kW (40% CDF) Rated Speed: 1,200 RPM Max Speed: 3,500 RPM Tailstock Features: Working Stroke: 7.9″ Spindle Bearing: Rigid, without bearing Max Peak Distance: 25.2″ Pressing Force: 850 daN Ielhccjwa Tz Uoqketf Center Point Adapter: MK4

Condition: good (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 5005, NC Turning-Mill Center, Berthiez T1-240/50F Year of 1989 Serial No. 5005, Three-jaw chuck, center height 900 mm, swing diameter over bed max. 950 mm, center width 6,500 mm, Itslhccowa In Njqkof max. load between centers 10 t, 50-station tool changer for milling tools, tool changer for turning tools, chip conveyor, drive power for turning operation 75 kW, travel X 700 mm, SK50 cutter holder, drive power 25 kW, 2 steady rests, tailstock, equipped with 20 cutting tools, control system, Siemens, type System8, chip conveyor. Disassembly and transport are to be carried out by the buyer.

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 2841823, Workpiece dia., max.: 250 mm | 10 in Itjlowatmdjhccqkef Workpiece length, max.: 175 mm | 7 in Chuck dia., max.: 315 mm | 12.5 in

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, net weight: 180,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Itelhccowaiuqjqksf Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)

Condition: ready for operation (used), Type: TVM 450/5 Uitzonderlijke freesmachine draai verticale draaibank die zeer grote werkstukken kunnen bewerken. Zowel de binnen- als buitendiameter van de werkstukken kunnen worden bewerkt!! De machine bestaat uit een vaste buitenkolom en een beweegbare binnenkolom. Draaitafel: buitendiameter: 6300 mm binnendiameter: 3000 mm grootste diameter van het werkstuk: 9800 mm kleinste diameter van het werkstuk: 2220 mm max. gewicht op tafel: 300 ton rotatiesnelheid: 0,08 27 tpm rotatiesnelheid bij draaien/frezen: ,4 t/min Vaste externe kolom: ram-afmeting: 550 x 550 mm diameter van de spindel: 304,8 mm ISO 60 - 37 kW op spindel Maximale hoogte van uitwendig draaien/vriezen: 8700 mm min. hoogte van uitwendig draaien/frezen: 700 mm verticale slak: 8000 mm horizontale slak: 2030 mm Beweegbare binnenkolom: rammaat: 280 x 280 mm maximaal diameter van inwendig draaien/frezen: 5180 mm min. diameter van inwendig draaien/frezen: 3048 mm maximaal hoogte van inwendig draaien/frezen: 5800 mm min. hoogte van inwendig draaien/frezen: 615 mm verticale slak: 5800 mm horizontale slak: 1120 mm Spiltoerentallen: 1,2 601 tpm Totaal vermogen: 250 kW 5-assige CNC-besturing Ijlhccqjwaiu Deketf

Condition: used, Year of construction: 1998, Technical details: turning diameter: * mm swing diameter: * mm turning height: * mm total power requirement: 56 kW Ielhccewaa Nroqkotf weight of the machine ca.: 9,5 t

Condition: good (used), Year of construction: 2001, Functionality: fully functional, CNC Lathe Vertical INDEX V250 Year of construction: 2001 CNC control CNC SIEMENS INDEX C200-4D (Siemens) - Travels: - X-axis: 1145 mm - Z-axis: 340 mm - With workpiece magazine - Max. Diameter: 300 mm - Max. Height: 190 mm - Max. Workpiece weight: 18 kg Weight: Approx. 11,000 kg Iolhccqsv U Ufxskjtf

Condition: used, Year of construction: 2017, DOOSAN PUMA V550 LATHE YEAR OF FIRST INSTALLATION: 2017 DOOSAN CNC – FANUC i Series NEW SELF-CENTERING CHUCK: DIAM.: 450 mm MAX. ROTARY DIAM.: 800 mm MAX. TURNING DIAM.: 730 mm MAX. TURNING HEIGHT: 750 mm Iolhccjv U Sxceqkjtf SPINDLE SPEED: 2,000 RPM TRAVELS: X: 390 mm Z: 780 mm RAPID FEEDS: X – Z: 12 – 16 MT. / MIN. TOOL HOLDER TURRET: 8 POSITIONS (INCLUDING TOOL HOLDERS) WEIGHT: KG. 9.000 COMPLETE WITH ALL DOCUMENTATION

Condition: used, Year of construction: 2012, travel distance X-axis: 830 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 4,500 rpm, turning diameter: 150 mm, total height: 3,000 mm, overall weight: 15,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 DSL, number of spindles: 2, space requirement length: 4,300 mm, space requirement width: 2,550 mm, CONTROLS .. CNC controls SIEMENS SINUMERIK 840 DSL BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 2 WORKING RANGE TURNING .. turning diameter (max): 150 mm MAIN SPINDLE .. spindle revolutions (max): 4500 /min X/Z SLIDE .. Z-axis travel: 180 mm .. X-axis travel: 830 mm .. traverse velocity Z (max): 3000 mm/min .. traverse velocity X (max): 60000 mm/min .. number of tool positions (total): 12 ELECTRICAL SPECIFICATIONS .. mains voltage: 24 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4300 mm .. space requirements -front/back-: 2550 mm .. total height: 3000 mm .. total weight approx.: 15000 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. band filtration unit: yes .. coolant through turret: yes .. through spindle coolant attachment: yes .. hydraulic system: yes Itelhccqov Uv Etokef .. European CE standards: yes Technology: Double spindle vertical turning center - 2 x main spindle (left + right) - max. chuck Ø 215mm - Knoll chip conveyor - Machine-centered feed belt with robot gripper

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 103342, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle speed (max.): 3,400 rpm, turning diameter: 340 mm, TECHNICAL DETAILS Turning diameter: 340 mm Swing diameter: 420 mm Turning height: 315 mm X-travel: 850 mm Z-travel: 315 mm Control: Siemens 840 DSL Spindle Spindle speeds (infinitely variable): 0 - 3,400 rpm Main motor power: 37 (48) kW Feed Feed range in X-direction: 0 - 45 m/min Itolhccqjv T U T Hjksf Feed range in Z-direction: 0 - 30 m/min Tool Tool system: 12-station turret head Tool drive power: 19 kW Tool speeds: 0 - 6,000 rpm MACHINE DETAILS Total power requirement: 60 kW Machine weight: approx. 12 t Space requirement: approx. 3.7 x 3.1 x 3.3 m EQUIPMENT - CNC vertical lathe - Automatic workpiece feed

Condition: good (used), turning diameter over cross slide: 4,550 mm, KOLOMNA CNC VERTICAL LATHE FAGOR 8065 TECHNICAL SPECIFICATIONS Brand: Kolomna Model: 1540 Retrofitted in 2008 CNC: Fagor 8065 T Clamping Plate: 4000 mm Ø Collet Diameter: 4550 mm Maximum table diameter with external supports: 4,340 mm Perimeter collet: 4700 mm Maximum workpiece height: approximately 1600 mm (RAM travel) Maximum workpiece weight: 10,000 kg Motor power: 113 kW Ijlhcjv Txpfjcqketf Turning speed: 48 rpm (4 speed range, hydraulic shifting) PRICE AND MORE INFORMATION CONSULT (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDING MACHINE, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, BENDING MACHINES)

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 300 mm, Vertical Turning Machine with Y-axis and Measuring Probe SIEMENS 840 D Power Line Control Power-on hours: 34,982 h Spindle hours: 22,953 h PCU 50 replaced in 2018 Spindle speed: 5,000 rpm Spindle motor: 20 kW Chuck diameter (KITAGAWA): 250 mm Travel paths: X-axis: 650 mm Y-axis: 500 mm Z-axis: 300 mm Turret: 12 positions Tool holder: VDI 40 Tool spindle speed: 4,000 rpm Tool drive power: max. 11.7 kW Machine weight approx.: 8 tons Additional equipment: Islhccjv Tn Epsqketf Measuring probe Driven tools C-axis High-pressure pump 20 bar, 500 liters, dual change-over filter Immersion cooler for coolant Electrostatic air extraction system by LTA Full-length chip tray underneath the machine 3-jaw chuck by Kitagawa B210 EWAB pallet belt loading station on the right Chip conveyor

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 810 D Main Drive Spindle speed range 4000 Spindle motor power 1.2-12 kW Number of axis 2 Movement X-Axis Movement 850 mm X-Axis Feed Force 2500 N X-Axis Rapid Traverse 3000 mm/min Z-Axis Movement 550 mm Z-Axis Feed Force 2500 N Z-Axis Rapid Traverse 3000 mm/min This IRLE Facing Lathe was manufactured in 1998. Ideal for vertical turning applications, this machine offers robust construction and reliable performance. Consider the opportunity to buy this IRLE Facing Lathe vertical turning machine. Contact us for more information. Ielhccev S Nb Aeqketf Application Types Turning

Condition: used, _____ Description: Year of manuf. : 2011 Control : Siemens 840 Dsl Turning diam. : 250 mm Spindle: Technology:Motortspindle Speed:6.000 rpm Ijlhccqsv S Dnkjkstf Power (max.):39 kW Torque (max.):460 Nm Clampingcylinder:Full-Clampingcylinder Workpiececlamping:3-Jaw chuck, SMW Autoblock, KNCS-NB-260-72 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 40 Tooldrive:6.000 rpm, 7,5 kW, 24 Nm Toolcarrier II: Technology:Drillingstation with Internal coolant supply Taper:Capto C8 In general: Movement in X/Z:1.180/525 mm Rapid travers in X/Z:60/30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure Toolmonitoring:ARTIS CTM Automation:Workpiecestorage, Circulation systems for Storage, Type L Oilmistseparation:Interface Electrostatic extraction prepared