HPG Laser Team GmbH

Condition: as good as new (ex-display), Lorch Handy TIG 180 DC ControlPro 230 V Lorch Weld Back Pack Carrying Frame – portable electrode inverter welder with top-class welding characteristics, ideal for assembly, construction sites, or workshops. Fastpulse up to 2 kHz for thin stainless steel sheets and pipes. HF ignition, 2/4-stroke operation, fast tack welding. Current reduction prevents burn-through when overheating, Hotstart ensures perfect ignition, Anti-Stick system prevents electrode from sticking, storage for 4 jobs. Technical specifications: Mains voltage: single-phase 230 V, 50 Hz; TIG current range: 3 - 180 amps; Electrode range: 150 amps. Duty cycle TIG: 180 amps at 30% duty cycle (40°C), 150 amps at 60%. Electrode: 140 amps at 60% duty cycle. Protection class: IP 23; Approval: S-mark; Weight: approx. 6.5 kg. Scope of delivery: cable, gas hose, and operating manual, without accessories. Cjdpfoyhpmhex Ac Nogn

Condition: as good as new (ex-display), Primary switched-mode power source, welding characteristics of absolute top class, fully digital process control, CAN bus system, digital high-frequency ignition device with process-controlled ignition sequence, parameter database, Tiptronic for saving and recalling 100 jobs, demand-controlled cooling circuit, liquid-cooled torch, user dialogue with plain text display. Technical data: Mains voltage: 400 Volt; Fuse protection: 16 A slow-blow; Adjustment range: 3 - 300 Amps; Open-circuit voltage: 10 - 60 V; AC frequency: 30 - 20 Hz; AC balance: 10 - 90%. Welding current DC: 300 A (20°C) - 250 A (40°C) 100% duty cycle, same for AC-DC: 300 A (20°C) - 250 A (40°C) 100% duty cycle; Welding current DC: 300 A (20°C) - 300 A (40°C) 60% duty cycle, same for AC-DC: 300 A (20°C) - 300 A (40°C) 60% duty cycle. Power factor: 0.99. Protection class: IP 23 EN 60529 / IP 23. Cooling type: F. Weight: approx. 108 kg. Scope of delivery: Torch cable and user manual. Cgsdpfxjyhplds Ac Njn

Condition: as good as new (ex-display), Process-controlled industrial welding machine, 4-roll wire feed motor, ideal for processing both low and high alloy materials as well as aluminum using TWIN-pulse and MIG brazing processes, with a separate wire feed in a portable case. Highly economical—up to 30% faster than conventional units, minimal to no spatter, easy operation, improved visibility in the root area, and deeper penetration thanks to high plasma pressure. Equipped with innovative SPEEDPULS technology for high-speed pulsed arcs at maximum quality. Euro connector for operation with liquid-cooled torches. Technical data: - Cooling type: Liquid-cooled Cgodpfx Ajyhpkmsc Nen - Mains voltage: 400 V +/- 15% - Connected load: 14.3 kVA - Fuse rating: 32 A - Adjustment range: 25 - 400 Amps - Duty cycle: 60% at 350/400 Amps (40°C/25°C), 100% at 320/350 Amps (40°C/25°C) - Wire speed: 0.1 - 25 m/min - Wire diameter: 0.6 - 1.2 mm (steel), 0.6 - 1.6 mm (aluminum) - Protection rating: IP 23 - Weight: approx. 127 kg Scope of delivery: Power cable with CCE 32 A plug, user manual, ZWP 10m.

Condition: ready for operation (used), On offer here is a bellied welding machine from Seleco type Genesis. The device is in good condition and was still in use 2 weeks ago. The device is being sold without the hose package, which was stolen from me a few days ago. The device can be tested on site if the buyer brings a suitable hose package. 1x SELCO Genesis 260GSM 1x SELCO type WU 14 1x transport trolley !!!Without hose package, as shown!!! Welding current max. 260 A 260 A at 60% ED Cgedpfoyhf Hqsx Ac Nsn 201 A at 100%ED Remote control SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, type of cooling: water, welding current (min.): 60 A, welding current (max.): 450 A, Carl Cloos GLC 451 C - Water-cooled Mig Mag Step-controlled 3-month warranty Suitable for: Heavy steel and stainless steel construction, 3-shift operation, workshop. Not suitable for: Cgsdpfx Aeyhd A Rec Njn Hobby use, thin sheet metal. Specifications: 60-450 AMP 380 Volt Water-cooled 30 steps adjustable 2/4 stroke 4 roller driven Adjustable burnback time Includes: Mig welding torch, earth cable with clamp, gas hose, and 10 metre intermediate package. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: A500P, type of input current: three-phase, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 8,000 mm, welding current at 60% duty cycle: 500 A, welding current (min.): 2 A, welding current (max.): 500 A, Demo OTC A500P – Water-cooled TIG ACDC Welding Machine 24-month warranty Cgsdpfxjyhdxxj Ac Njn Demo Model, Ready for immediate use for manual welding or robotics. Suitable for: Robotic welding, aluminium, steel and stainless steel production welding, heavy construction, machine building. Not suitable for: On location, hobby. Specifications: 2-500A 60% ED 500A 380 Volt AC TIG / DC TIG / AC-DC TIG Pulse Synergistically adjustable Water-cooled 2/4 Step High frequency Pre gas / Post Gas Start current / end current Up slope / Down slope AC Balance / AC Frequency Pulse Frequency Spot welding Programme Memory Electrode option Includes: PRO30 8-metre welding torch, ground cable, and gas hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of cooling: air, welding current (max.): 200 A, Cjays Tig 200E ACDC Pulse - 200A 230 Volt ACDC 3-month warranty Suitable for: Hobby, steel - stainless steel - aluminium Not suitable for: Professional welding work, >5mm thickness. Specifications: 200 AMP 230 volts Gas-cooled 2/4 cycle Pulse ACDC Pre gas Post gas Up slope Down slope Start current End current Electrode option Includes: 4 metre PRO17 welding torch, earth cable with clamp, and gas hose. Visits by appointment only. Cgjdpoyhduasfx Ac Nen Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Manufacturer: Merkle (Germany) Model: mobiarc 284 Technology: IGBT Inverter Welding Processes: MMA (Stick), TIG DC (Lift-Arc) Input Power: 400 V, 3-phase, 50/60 Hz Product Description The Merkle mobiarc 284 is a modern, lightweight inverter-based welding power source, designed for professional use in workshops, construction sites, assembly companies, and industrial maintenance. Thanks to its compact design and low weight of only 19 kg, it is highly portable and ideal for on-site and confined-space welding. This unit delivers excellent welding characteristics, smooth current control, and advanced arc control functions. It is approved for welding in confined spaces and marked with the “S” safety symbol, making it suitable for demanding and safety-critical environments. Key Features • Advanced IGBT Inverter Technology – Efficient, compact, and reliable • Smooth Welding Current Adjustment – Precise control for high-quality welds • Digital Display – Clear indication of all welding parameters • Remote Control Socket – 10-pole connector with polarity switch • MMA Welding with Cellulosic Electrodes – Stable arc, suitable for vertical-down welding • TIG DC Welding (Lift-Arc) – TIG welding without high-frequency ignition • Confined Space Approved (S Symbol) – Safe operation in restricted areas • Lightweight & Portable Design – Ideal for site work and field repairs MMA (Stick) Welding The mobiarc 284 is designed to weld all types of coated electrodes with diameters from 1.6 to 6.0 mm. It includes advanced arc control functions: • Arc Force: Automatically increases welding current to prevent electrode sticking • Hot Start: Adjustable current and time for reliable arc ignition • Anti-Stick: Immediately cuts current if the electrode sticks, allowing easy re-ignition • Excellent Performance with Cellulosic Electrodes TIG Welding (DC Lift-Arc) The unit is also well suited for DC TIG welding with filler wire using Lift-Arc ignition. A separately available TIG torch with integrated gas valve, pressure regulator, and shielding gas cylinder are required. Applications • Repair and maintenance • Civil construction projects • Agricultural equipment repair • Assembly and installation companies • Industrial and general fabrication Suitable Materials • Alloyed and unalloyed steel • Stainless steel • Cast iron Technical Specifications • Input Voltage: 400 V, 3-phase, 50/60 Hz • Welding Current Range: 15 – 280 A • Welding Voltage Range: 20.6 – 31.2 V • Duty Cycle (eta) 40 °C (10 min): o 35% – 250 A o 50% – 250 A o 60% – 240 A o 100% – 210 A • Open-Circuit Voltage: 90 V • Current Consumption (MMA / TIG): 14 A / 12 A • Power Consumption (MMA / TIG): 9.7 kVA / 8.3 kVA • Maximum Input Current (MMA / TIG): 21 A / 16 A • Electrode Diameter: 1.5 – 6.0 mm • Power Factor: 0.98 cosφ Csdpfjyhddujx Ac Njgn • Protection Class: IP23 • Insulation Class: H • Remote Control Interface: 10-pole connector with polarity switch • Connection Socket: 50 mm² • Standards: EN 60974-1, CE, “S” marking • Dimensions (L × W × H): 495 × 210 × 450 mm • Weight: 19.0 kg

Condition: like new (used), functionality: fully functional, Manufacturer: Merkle (Germany) Model: LiteTIG 300 AC/DC Technology: IGBT Inverter Welding Processes: TIG AC/DC, TIG DC Pulse, MMA (Stick) Input Power: 400 V, 3-phase, 50/60 Hz Product Description The Merkle LiteTIG 300 AC/DC is a compact, high-performance professional TIG welding power source, developed using advanced inverter technology to deliver excellent arc characteristics and outstanding functionality. The machine supports both AC and DC welding, making it ideal for welding aluminium as well as steel, stainless steel, and a wide range of non-ferrous metals. Designed for professionals, the LiteTIG 300 AC/DC combines simple front-panel operation with a powerful Expert Mode, allowing experienced welders to fully customize all welding parameters for maximum precision and weld quality. Control & User Interface • Digital Display (Standard) – Clear monitoring of current, time, frequency, and welding parameters • Standard & Expert Modes – Programmable modes for beginners and professionals • Multi-Language Menu • Control Panel Lock with PIN Code • Rotary Control Knob – Fast and intuitive parameter adjustment • Memory Functions – Save and recall complete welding programs (up to 28 jobs) Advanced TIG Technology • AC/DC TIG Welding – Suitable for aluminium, magnesium, copper, and other non-ferrous metals Cjdpfxsyhdbao Ac Nsgn • HF & Lift-Arc Ignition – Clean and reliable arc start • High-Frequency DC Pulse up to 12 kHz – Enables extremely narrow, focused arcs for superior control and heat input reduction • AC Frequency Control (50–200 Hz) – Adjustable arc shape and penetration • AC Balance Control – Optimized oxide cleaning vs. penetration • Selectable AC Waveforms – Square, soft, and sinusoidal • Pulse Modes: Slow pulse, fast pulse, and high-frequency pulse • Spot Welding Function – Adjustable from 0.01 to 2.5 s _____ MMA (Stick) Welding The LiteTIG 300 AC/DC also supports MMA welding with coated electrodes from 1.6 to 4.0 mm (electrode holder required if not included): • Hot Start – Adjustable for reliable arc ignition • Arc Force – Prevents electrode sticking • Anti-Stick – Automatically cuts current if the electrode sticks Additional Features • Two Welding Currents (I1 / I2) – Switchable via Merkle TIG torch • 2T / 4T Operation Modes • Pedal Control Support • Temperature-Controlled Cooling Fan • Air or Water-Cooled Torch Compatibility • Confined Space Approved (“S” Symbol) • Optional Water Cooling Unit Applications • Professional TIG welding • Industrial production and fabrication • Maintenance and repair work • Automotive and motorcycle repair • Precision welding of thin materials Technical Specifications • Input Voltage: 400 V, 3-phase, 50/60 Hz • Output Current Range: 5 – 300 A • Output Voltage (TIG / MMA): 10 – 22 V / 20 – 32 V • Duty Cycle 40 °C (10 min): o 50% – 300 A (TIG) o 60% – 280 A (TIG) / 270 A (MMA) o 100% – 250 A (TIG) / 230 A (MMA) • TIG DC Pulse Frequency: 0.2 Hz – 12 kHz • Open-Circuit Voltage: 70 V • AC Frequency: 50 – 200 Hz • AC Waveforms: Square, soft, sinusoidal • Electrode Diameter (MMA): 1.5 – 4.0 mm • Power Factor: 0.95 cosφ • Protection Class: IP23 • Insulation Class: H • Torch Connection: Merkle TCG, 5-pole • Power Connection: 50 mm² • Cooling: Air or water • Dimensions (L × W × H): 600 × 300 × 575 mm • Weight: 39.2 kg

Condition: like new (used), Year of construction: 1999, operating hours: 5 h, functionality: fully functional, overall weight: 40 kg, Rotary table for welding operations Cgodpfsygrzfsx Ac Nen

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 273.526.15, continuous power: 9 kW (12.24 HP), For sale: industrial CNC machine for plasma sheet cutting, Messer Cutting Systems EasyTherm 3600, fully equipped for production cutting. Large working area, table dimensions 12,000 × 2,000 mm. The machine is fitted with 4 cutting heads (1 plasma, 3 oxy-fuel) mounted on the gantry. Equipped with exhaust system. The machine is fully functional and can be inspected and tested in operation. Specifications: Cgedpfxoyfuxqj Ac Nsn • Model: EasyTherm 3600 • Year of manufacture: 2015 • Working area: 12,000 × 2,000 mm • Control/CNC: GlobalControl-S (GC-S) • Machine No.: 273.526.15 • Power supply: 3×400V / 50Hz • Power: 9 kVA • Installed power: 9 kVA • Plasma cutting source: Kjellberg HiFocus 280i neo

Condition: used, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, The machine is hardly used and fully functional. Cjdpjyfnd Hsfx Ac Negn

Condition: used, functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (max.): 380 A, ESS E2 4100 - MIG/MAG Pulse Gas welder 3 Months warranty Fully refurbished, tested, and ready-to-use Suitable for: Construction of steel, stainless steel and aluminium structures, agriculture, medium-sized structural welding work. Not suitable for: 3-shifts welding work, >20 mm construction work, shipbuilding. Specifications: 0-380 AMP 100% ED: 280 AMP 400 Volt Pulse / PowerPuls Synergic Csdpfx Ajydzv Tsc Nsgn 2/4 Step 4 Roller drive Pre gas / Post gas Start current / End current Up slope Bi level Butnbacktime adjustable Fixed programs / Program memory Including: Parweld SB501 4 meter, Ground cable with clamp, and gas cable Indicative new price at time of introduction: €6000 Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (min.): 10 A, welding current (max.): 300 A, For sale: Rehm Megapuls Focus 300 10-300 AMP 400 Volt Pulse Double Pulse Focus Arc Synergic Water-cooled 2/4 Step Cedpfxjydv Rxo Ac Negn 4 Roller drive Down slope Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished – serviced – tested Including PRO5000 welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (max.): 250 A, For sale: Cgodpfoydv N Isx Ac Nen Lascentrum Multimig 250-3 Dual Pulse 250 AMP 400 Volt Gas-cooled Pulse Double Pulse Synergic 2/4 Step 4 Roller drive Steplesly adjustable Program memory Burnbacktime adjustable Stick option Steel, Inox, and Aluminum weldable Refurbished and tested Including SB360 Mig welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, warranty duration: 36 months, type of cooling: water, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 370 A, welding current (min.): 30 A, welding current (max.): 500 A, For sale: OTC ARXIS P503L 30-500 AMP (100% 370A) 400 Volt Synergic Pulse Double Pulse Low Spatter 2/4 Step 4 Roller drive Digital display Pre gas Post gas Up slope Down slope Start current End current Hot start Soft start Steel – Stainless Steel – Aluminum – CuSi – CuAl – Inconel – Titanium weldabke Demo Model Including 4 Meter PRO5000 Welding torch, ground cable with clamp, gas hose, 0,9M interconnection package, and 3 Years Warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. Cgedpfoydv Nnex Ac Nen We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, This 4-in-1 combo inverter welding machine MIG/MAG ARC MMA TIG Lift 200 A IGBT FLUX is being auctioned online as part of our industrial auction / machinery auction assortment clearance, warehouse sale – individual/display units in Oettingen. Cjdpfxjydb Euo Ac Njgn

Condition: used, This orbital welding system, model: ST-95 Tesch, will be auctioned online in our industrial auction / machinery auction (follow-up auction) due to the building relocation of Siemens Erlangen – including laboratory equipment, electrically height-adjustable desks, office chairs, and technology. Codpfx Ajydbk Dec Nsgn

Condition: used, This INVERTER ARGO - TIG welding machine, model: MARK II 300P, is being auctioned in our industrial auction / machinery post-sale auction due to the Siemens Erlangen building relocation – laboratory equipment, electrically height-adjustable desks, office chairs, technology, online. You will find this and many other items on our platform. Cedpjydau Uefx Ac Negn

Condition: excellent (used), Year of construction: 1996, operating hours: 73 h, Complete equipment for orbital welding and bevelling of pipes in all kinds of materials and all kinds of thicknesses in diameter from 20 to 170mm for sale. Manuals and part lists are included. In addition to welding equipment, a TRI-Tool 206B and a Wachs SDB 103/3 bevelling machine are included. They will efficiently make all kinds of joints like V, J or U bevels. The equipment can be delivered free of charge "to the door" anywhere in Europa and up to 1 week of training is included. All three included welding heads are of the same type (original Dimetrics FFIP heads- Full Function In Place) with both oscillation and AVC. (Automatic arc length) All three welding heads each have their own feeder for 100mm wire spools. The equipment consists of the following: *1 pc Dimetric Gold Track 3 (hour meter shows 72.6 hours "weld time" and 1088 hours "stand by" *1 pc welding head FFIP Small for Ø20- Ø 50mm *1 pc ditto but Medium, for Ø 48 – 90mm *1 pc ditto but Large, for 100-170 mm Completely ready to weld with all cables and remote control The welding heads are in solid transport boxes. Furthermore; *1 case with Tri-Tool 206 B bevelling machine pneumatic drive, 2"-6" •very little used • Bevel pipes from 2" to 6" (60.3 to 168.28mm) • Wall thickness up to 22.23mm) *1 case with Wachs SDB 103/3 pneumatic drive Capacity from 1" to 3'" well used but in good working condition. Dimetric's equipment has welded approximately 70% of the world's nuclear power plants, - both due to precision, operational reliability and robustness. Dimetrics was also the first to be certified to weld hydraulic systems on aircraft. Cgedpeycvifofx Ac Nen Dimetrics (now together with Canadian Liburdi) is still a leader in welding nuclear power plants. For example, "Framatome" is responsible for the construction of 13 new nuclear power plants in France - and they only use welding equipment from Liburdi - Dimetrics, now Gold Track 7. All welding heads can still run on the latest Dimetrics welding machines. My equipment is from the 90s, and I got it from a shipyard that had produced nuclear-powered submarines where this particular equipment was on standby, but was never used for anything other than testing and training. A new piece of equipment with only one welding head and the same functions (AVC and oscillation) quickly costs from the very cheapest some €75.000 and up- of course without bevelling machines. I bought the equipment for use on a job that never materialised (!), and because I had 4 other orbital machines from before, this was rarely used. Now I am stopping working with orbital welding after 50 years in the industry, and continue as a consultant and supplier. This gives me time to load the equipment into a cabinet trailer, connect it to my camper and deliver it anywhere. Price complete delivered anywhere in Europe, including up to 1 week of training, €20000 excl. VAT.

Condition: new, Year of construction: 2026, CORMAK SL2000 Laser Welding Machine is an advanced industrial FIBER system providing comprehensive welding, cutting and laser cleaning functions in one unit. With a 2000 W laser source and a modern design, this machine is ideal for facilities where welding speed, joint quality and reliability are key factors. As part of a special offer, the machine comes with a complete set of U-groove rollers, a Teflon wire feeding tube and a cleaning kit (lens and nozzle) Main Advantages High laser power – 2000 W – enables deep penetration and welding of thicker materials without multiple passes. Welding speed up to 120 mm/s – significantly reduces production time compared to conventional methods. Concentrated laser beam – minimal heat-affected zone ensuring clean, durable weld seams. Thin material capability – allows welding of stainless steel from 0.5 mm thickness. Option to weld with or without wire – flexibility to match process requirements. Laser cleaning and cutting modes – extend the machine’s versatility and daily usability. Automatic wire feeder – fully synchronised with the control software for process stability. Design and Technology CORMAK SL2000 is equipped with a 1080 nm fiber laser source and an advanced head with adjustable spot size (0–5 mm), enabling welds even in hard-to-reach areas. The water-cooling system and 230 V operating voltage ensure safe and stable performance across various production environments. Interchangeable nozzles and ergonomic design make servicing and daily operation simple and efficient. Precision and Efficiency The penetration depth for stainless steel at 1 m/min reaches 4.57 mm, which is an excellent result for a compact industrial unit. Adjustable welding parameters allow full control over seam quality — for both thin elements and thicker construction components. Stable beam parameters guarantee repeatability and a clean aesthetic finish. Applications Metalworking plants and industrial workshops Production of railings, light structures and steel frames Automotive, household appliance and electronics industries Laser cutting and cleaning of metal components Standard Equipment Laser welder with integrated cooling system Welding gun with adjustable focal length Fiber laser source Automatic wire feeder Ø 0.8–1.6 mm Complete cable set Starter kit of nozzles and protective lenses Technical Data Maximum power 2000 W Laser wavelength 1080 nm Penetration depth (stainless steel 1 m/min) 4.57 mm Penetration depth (carbon steel 1 m/min) 3.59 mm Penetration depth (aluminium 1 m/min) 4.0 mm Penetration depth (brass 1 m/min) 4.0 mm Cgjdpfxoychl Se Ac Nsn Welding speed 0–120 mm/s Automatic wire feeder Ø 0.8–1.6 mm Maximum power consumption ≤6.0 kW Cooling system Water-cooled Operating voltage 230 V Shielding gas consumption approx. 10–12 L/mm Ø wire Dimensions 600 × 1100 × 1100 mm Weight approx. 185 kg

Condition: good (used), Year of construction: 2008, machine/vehicle number: 5277531, Offer 26039 Technical Data: Cgjdpfx Aeychhyjc Non - All dimensions are approximate - Working range / Travel horizontal approx. 3 m - Working range / Travel vertical approx. 3 m - Mast height approx. 5 m - Infinitely variable hoist drive - Infinitely variable welding feed - Control panel with control system + switch cabinet + cabling - Welding power source STARMATIC 1003 DC up to 1000 A - Welding mast STEITZ - Submerged arc welding powder hopper - Mast with motorized rail carriage for floor-mounted running rails - Motorized vessel rotator with carriage, load capacity 30 T - Floor-mounted running rails approx. 25 - 30 m - Connection 400 V

Condition: excellent (used), Year of construction: 2022, operating hours: 40 h, functionality: fully functional, The welding robot is in good technical condition. This is a fully programmable robot controlled via a Touch pad (tablet). In simple terms: at the beginning, you guide the robotic arm exactly as you want to weld and save the procedure to memory. Afterwards, the robot operates automatically. We have a 'welding arm' available for both TIG and MIG welding, including both power sources. Inspection during operation is possible by prior arrangement. Cgodeyazfmepfx Ac Nen

Condition: like new (used), Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: WLD-MODEL-SIZE, type of input current: AC, total height: 3,000 mm, total width: 3,000 mm, total length: 2,000 mm, input voltage: 240 V, overall weight: 8,000 kg, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, warranty duration: 12 months, type of cooling: water, continuous power: 22 kW (29.91 HP), Weld overlay cladding is an advanced welding process which provides an anti-corrosion or wear resistant surface on a less corrosion or wear-resistant base metals. A prime example involves the deposition of a stainless steel or nickel-based alloy layer onto a carbon steel base material, thus not only giving it corrosion resistance but also lower cost compared to the use of a monolithic stainless steel or nickel alloy components (stainless steel or nickel-based alloy). With our advanced equipment and software, EQ Automation is able to deliver our customers a total weld overlay cladding solution that will give our customers better productivity and lifespan of their equipment. Cgsdjyaw Ecopfx Ac Nen Welding Machine Sets: Robotic Welding, Quality Welding Consumables, Wires, Rods available!! Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters up to 3.0meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Balls, Valves, Flange faces, RTJ groove, Bevel etc. One touch, More Welding Solutions, Stocks for sale!!

Condition: not inspected (used), Year of construction: 2017, functionality: unexamined, input voltage: 72 V, type of cooling: water, No minimum price – guaranteed sale to the highest bidder! Set includes the following components: 2x inverter welding machines HighPULSE 552 RS 2x water cooling units WK-350 Special wire feeder DV-31 Twin + additional accessories (hose packages, torches) Csdpsyaqbkjfx Ac Njgn MACHINE DETAILS Electrical data (welding unit) Current range: 20 A – 550 A Voltage range: 15 V – 41.5 V Mains voltage: 72 V Mains current: 35 A