VBS Verkehrs-Und Bausicherheitechnik GmbH

Condition: ready for operation (used), Year of construction: 2015, Three used compressors: Ksdpey R S Dvsfx Anxedl 2x Servatechnik SR 300, year of manufacture 2006 No main switch installed, approx. 24,000 operating hours 1x Worthing Creyssensac, year of manufacture 2015, no main switch installed, approx. 72,000 operating hours

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – RMZY Series (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: RMZY Series (20 Bar Version) Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Kdedpsy Ecu Ujfx Anxol Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 2014, condition: not inspected (used), functionality: unexamined, power: 7.5 kW (10.20 HP), overall weight: 400 kg, overpressure (max.): 11 bar, rotational speed (max.): 2,930 rpm, machine/vehicle number: 1283, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect within the specified period from 04.05.26 to 07.05.26. Kdodpsyr N Srefx Anxsl TECHNICAL DETAILS Rated power: 7.5 kW Motor speed: 2,930 rpm Max. operating overpressure: 11 bar MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 730 x 660 x 1,100 mm Weight: 400 kg External reference: 70

Condition: used, Power 5,5 KW Receiver 50 L weight of the machine ca. 0,450 t dimensions of the machine ca. . m feed pressure 330 bar liter capacity . l Medium: Nitrogen N2 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Kdsdpfxjyqvz Do Anxel Your Markus Hirsch Team

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 2,400 mm, pressure: 12.75 bar, machine/vehicle number: CAI709141, No reserve price – guaranteed sale to the highest bidder! Kdodpeym Rqfsfx Anxel Placing a bid obligates you to timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Compressed air max.: 12.75 bar MACHINE DETAILS Operating voltage: 230 V Frequency: 50 Hz Compressor voltage: 400 V Compressor frequency: 50 Hz Connected load: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 2,400 mm Weight: 500 kg External reference: Pieper – Lot 55

Condition: good (used), Oil separator and air cooling for compressor Kedpfx Aeymmbmenxjdl

Year of construction: 2009, condition: used, Ingersoll Rand TS1100W Air Dryer Manufacturer Ingersoll Rand (manufactured by Parker Hiross S.p.A, Italy) Type Refrigeration air dryer – industrial version Industrial applications • Air treatment for compressed air in pneumatic systems • Industrial applications requiring dry air: machining, painting, automation, etc. • Protection of equipment sensitive to humidity Main technical specifications: • Model: TS1100W • Serial number: 3733790002 • Cooling: water-cooled • Refrigerant: R407C • Maximum low-side pressure: 1.9 MPa (275 psi) • Maximum high-side pressure: 2.8 MPa (406 psi) • Circuit pressure: 2.6 MPa (378 psi) • Minimum/maximum air pressure: 4 bar / 14.5 bar • Maximum air temperature: 60°C • Ambient temperature: 5°C to 50°C • Power supply: 400 V – 3 Ph – 50 Hz • Power consumption: 15.6 kW / 27.8 A • Protection level: IP44 • Oil carryover: ≤ 0.01 mg/m³ (with suitable pre-filtration) • Approximate dimensions: 1,450 mm width • Approximate weight: ca. 650 kg • Year of manufacture: February 2009 🧩 Machine usage Kedoxggmnspfx Anxjdl The Ingersoll Rand TS1100W industrial air dryer is designed to remove moisture from compressed air in production facilities. It protects pneumatic lines, automated equipment, and processes sensitive to humidity, ensuring the reliability and longevity of machinery. ⚙️ Features / Distinctions The TS1100W is distinguished by its water cooling, ideal for industrial environments with high thermal loads. It supports high operating pressures (up to 14.5 bar), and its R407C refrigerant meets modern environmental standards. The robust design allows for heavy-duty, continuous operation.

Condition: excellent (used), Screw Compressor Brand: Alup Model: SCK 15-8 Year: 2008 Free Air Delivery: 1.7 m3/min Pressure: 8 bar Motor Power: 11 kW - 380 Volt Load Hours: 14,242 Operating Hours: 42,034 Length: 1,530 mm Width: 620 mm Height: 900 mm Ksdpoxcybdsfx Anxodl Weight with pallet: 230 kg

Condition: used, Compressor KAESER AS36 Kdsdpfjxbty Dox Anxsl

Year of construction: 1999, condition: used, power capacity 1,5 kW feed pressure 11 bar liter capacity 160 l weight of the machine ca. 0,15 t dimensions of the machine ca. 1,5x0,5x0,8 m Kodpfx Aou Sbd Tjnxodl 380 V, 50 Hz with plug and cable colour: light grey 2 cylinder, boiler 90 l compressor has been checked in our workshop, electr. testing report included!

Year of construction: 1993, condition: used, Technical details: Pressure capacity: 10 bar volume capacity: 340 l/min tank capacity: 350 l cylinder: 2 St. motor capacity: 37 kW total power requirement: 2,0 kw weight: auf Anfrage kg consists of dryer and air pressure tank compressor: - engine capacity 37kW / 1450rpm / pressure capacity 10 bar,flow capacity 340l/min air pressure tank: - make: OSK, type: , für 11 bar, Temp. -10°C bis +50°C, content 350l,CE 92004 dryer/filtering plant: - make: Kaeser, Typ TB 9, permitted ambient temperature -10°C up to +50 C° Kedpju Nzycofx Anxodl *

Year of construction: 1991, condition: used, Technical details: Pressure capacity: 10 bar volume capacity: 5000 l/min motor capacity: 37 kW Kodpfxou Nzx Eo Anxodl voltage: 380 V dimensions L x W x H: 0,9x0,7x1,5 m Equipment: - air cooling - suction opening = 500x400mm On sale as is, without test. Can be used as spare parts dispenser if necessary. *

Year of construction: 1991, condition: used, Technical details: drive power: 0,16 kW feed pressure: 11 bar liter capacity: 250 l total power requirement: 2,8 kw Piston Compressor with Air Pressure Tank Kdsdpfx Aneu Nzxrexol Condition: Cylinder head gasket and steel blade defective. The piston is ok. As a spare part donor! On sale as is! *

Condition: new, Power 7,5 KW Receiver 500 L feed pressure 14 bar liter capacity 995 l connected load frequency 400 V weight of the machine ca. 200 kg dimensions of the machine ca. 2,0 x 0,7 x ,125 m Kdsdpfx Aeu Imfzenxsl

Condition: used, Compressor on trailer. Kdedpoupki Sjfx Anxol CIRRUS ORIGINAL

Condition: new, Power 7,5 KW Receiver 500 L weight of the machine ca. 300 kg dimensions of the machine ca. 1,7x 0,6 x 1,45 m feed pressure 16 bar liter capacity 870 l Kodpfx Ajhid Erenxodl The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V

Year of construction: 1988, condition: used, Compressor unit type 178 A CD E Delivery volume 4760 l min 9 bar operating pressure KW 30 Kdsdpfxjgw Dqpe Anxol

Condition: new, Power 7,5 KW Receiver 270 L Ksdpfx Aognvugonxjdl weight of the machine ca. 180 Kg dimensions of the machine ca. 1700x600x1270 mm feed pressure 10 bar liter capacity 850 l/min connected load frequency 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages.