Capek Sp z o.o.

Condition: good (used), Serial no.: 043-028/32, pressing force 1,600 kN, ram stroke 500 mm, throat depth 360 mm, max. distance table to ram 800 mm, weight 7,000 kg, recorded operating hours 33,408. Ielhcewyw T Uodw Eoaw

Condition: used, Functionality: fully functional, Pressing force forward: 63 kN Pressing force return: 20 kN Ram speed forward: 140 mm/s Iaoljwywt Iohcdw Ejw Ram speed return: 400 mm/s Ram bore: 25 mm Max. ram stroke: 450 mm Table size: 450 x 400 mm Dimensions (L/W/H): 1200 x 800 x 2300 mm Machine weight approx. 0.96 t

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Ijlhewyplcecdw Ejaw Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: good (used), Year of construction: 1983, Functionality: fully functional, Hydraulic press KOMATSU OBA 60-2 Year of manufacture 1983 Press force 60 tons. Ram stroke 20-180 mm Installation height 330 mm Ram adjustment 70 mm Number of ram strokes per min. 70 Clamping plate dimensions 900x650 mm Ram surface 450x500 mm Weight 4800 kg Iolewymubshcdw Eeaw

Condition: ready for operation (used), Year of construction: 1965, Available immediately from location : Hydraulic single column press WMW Zeulenroda Type PYE 160 S Year of construction 1965 General overhaul in 2006 Pressure capacity 160 tons Table 900 x 620 mm Iolhewykr Rjcdw Eoaw Distance table - ram 800 mm ram stroke 500 mm ram from rapid traverse 200 mm/s ram to 125 mm/s Drive 17.5 kw Weight 8.5 tons At a price of Euro 4,500 plus VAT ex location

Condition: used, 1 unit hydraulic single-column press, manufacturer VEB Wema Zeulenroda, type PYE 25 S 1 M, serial no. 054-008/212, year approx. 1985, total weight 2,200 kg, nominal force 250 kN, speed 100 mm/sec, ram stroke 500 mm, throat 380 mm, two-hand operation, inventory no. 0029 Iaeljwx H Tzjhcdw Ejw

Condition: used, 1 unit hydraulic single-column press, manufacturer WMS Wema Zeulenroda, type PYE 25 SS, serial number 055-013/15, nominal force 25 Mp, total weight 2,400 kg, pressure 160 kp/cm², downstroke speed 200 mm/sec, upstroke speed 450 mm/sec, ram stroke 500 mm, throat depth 380 mm, two-hand control, inventory no. 0035 Iaolhowx H Thjcdw Esw

Condition: used, Year of construction: 1988, table width: 900 mm, reverse speed: 125 mm/s, Working pressure: 16 MPa Upper table: 700 x 450 mm Lower table: 900 x 630 mm Ground clearance: 800 mm Cylinder stroke: 500 mm Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW Iaslhcewxxhkodw Eew

Condition: not inspected (used), Functionality: unexamined, machine/vehicle number: 068-071/270, throat depth: 150 mm, table width: 280 mm, table length: 280 mm, distance table to ram: 355 mm, stroke distance: 280 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Rated force: 3.15 Mp Iaslowvh R Ashcdw Eew Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat: 150 mm Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 7500 This SCHAAL SEP63N was manufactured in 2012. It is a robust hydraulic stamping press with a nominal force of 630 kN and a stroke length range of 8-80 mm. It supports tool dimensions up to 710 x 710 mm and operates at a flywheel speed of up to 500 rpm. Power consumption stands at 130 kW, and it requires a 400 V operating voltage. Consider the opportunity to buy this SCHAAL SEP63N hydraulic stamping press. Contact us for more information. Ijlhcdwewr N D No Ejaw Application Types Stamping

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length Iolhcdewp Nv How Ejaw 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: used, Year of construction: 2020, Functionality: fully functional, pressing force: 100 t, pressure: 315 bar, The CD-100E hydraulic press belongs to the CD/NC series and is custom-designed for continuous cycle high production work. TECHNICAL SPECIFICATIONS Power tn 100 Engine Power cv 10 Powered Speeds 2 Working Speed mm/s 7,5 Fast Speed mm/s 37 Return Speed mm/s 54 Maximum Pressure Bar 320 Piston Stroke mm 250 Upper Table mm 600 x 250 Working Height mm 950 Equipped with a top and bottom table made of machined C45E steel with DIN-650 slots. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Features an electros welded goose-neck structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Specially configured top table with double anti-rotation Ø 40 mm and limit switches. • Specially configured bottom table with coupling base. • Indexed table with 2 stations. • Rotation time: 1.4 seconds. • Ø between parts: 700 mm • Ø outer aluminum disk: 1,000 mm • Automatic overturning of the lower table via a globoidal cam with 1.4-second cycles. CYLINDER AND HYDRAULIC GROUP • Main double-acting cylinder with a 250 mm stroke, sleeved jacket, chrome-plated piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds, automatic disconnection of high speed, and independent operation, equipped with a decompression system. Stop and advance by pressure switches. • Soundproofed hydraulic group (-60 decibels). • Operation at 2 independent pressures, one for each station, adjustable by 2 pressure switches with 2 sections, one for each station. • Glycerin manometer with tonne reading. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for manual or automatic operation, 1 or 2 speeds for main cylinder advance. • Low voltage operation via 2-hand push button. • Front safety photoelectric barriers Level 4. • OMRON PLC. • Voltage indicator in the network. Iajlhowpg Iascdw Eow • Pressure maintenance of 1 second adjustable by program. • Fixed guard in the central part, with passage for entry and exit parts. • For safety, it includes category IV photoelectric barriers located in the front work area.

Condition: used, Year of construction: 2026, Functionality: fully functional, total height: 2,020 mm, total width: 960 mm, total length: 1,350 mm, pressing force: 50 t, table width: 450 mm, table length: 450 mm, operating speed: 30 mm/s, reverse speed: 42 mm/s, pressing speed: 6 mm/s, We are offering a new C-press with a torsion-proof ram. This press is currently under construction and will be delivered to a customer in August. We will manufacture this press in multiple versions for our showrooms. These presses were specially developed for bending, stamping, forming, punching, assembling, and deep drawing. Forces of 50-150 tons are available. Model CD-50/NC Power 50 T Motor power 4 KW Ram stroke: 250 mm Working speed 6.3 mm/s Approach speed 30 mm/s Return speed 42 mm/s Maximum pressure 320 Piston stroke 250 Lower table 450×450 Ram with anti-rotation device Open height 400 mm Weight 1480 kg CYLINDER AND HYDRAULICS: Islhcewlgcijdw Eoaw The double-acting cylinder is equipped with a guide bushing, a chrome-plated piston rod, and wear-free guide elements. To prevent wear on the piston rod, the presses feature a removable and replaceable pressure plate. Tools can be mounted in place of the pressure plate. It features an anti-rotation device attached to the cylinder using a clamp and a guide rod. The two-speed hydraulic group is equipped with an automatic high-speed shutoff. A cylinder decompression valve is also included. ELECTRICAL AND SAFETY: A SIEMENS SIMATIC S7 1200 safety PLC and a 4-inch MTP-400 touchscreen located above the electric foot pedal are integrated as standard. It allows programming of the semi-automatic and automatic operating mode, as well as the power, stroke, and dwell time of the upper cylinder. It has a memory capacity of 99 recipes, with each recipe capable of programming all previous values. The control cabinet features a switch for selecting the desired operating mode (manual or automatic), as well as a key-operated switch for maintenance work. The electrical and hydraulic control systems are redundant and self-monitoring. The hydraulic safety block features valves with electrical position monitoring for the necessary safety. The machine is operated via a Level IV two-hand control button. To ensure safety, fixed side guards with a front opening of 650 mm are installed. A hydraulic cushion or hydraulic ejector can be installed. The machines are supplied with an operating manual. The CD series presses meet all essential safety requirements and criteria according to CE regulations.

Condition: used, Year of construction: 2023, Functionality: fully functional, pressing force: 400 t, table width: 2,000 mm, table length: 1,000 mm, operating speed: 106 mm/s, reverse speed: 125 mm/s, ram stroke: 750 mm, pressing speed: 12 mm/s, Equipment: safety light barrier, HYDRAULIC C-FRAME PRESS FOR RAILWAY RAIL STRAIGHTENING We are offering a new/replica version of this press. The press will be placed on sale by the customer in the second or third quarter of 2026 due to the project's extension. The CF-400E/NC hydraulic press belongs to the CF/NC series and was specifically designed for railway rail straightening. Equipped with an upper and lower table made of machined C45E steel with DIN 650 grooves. It uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential health and safety requirements according to CE regulations. TECHNICAL DATA Press force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Push plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Iajlswkv A Nshcdw Eew Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The gooseneck structure is electro-welded and made entirely of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • The upper table ensures perfect alignment with four 80 mm diameter lateral cylindrical guides equipped with maintenance-free bimetallic bushings. CYLINDERS AND HYDRAULIC GROUP • Single-acting main cylinder with jacketed barrel, chrome-plated piston, and maintenance-free, wear-resistant guides. • Two lateral double-acting cylinders with chrome-plated pistons and wear-resistant guides, enabling fast start-up and return speeds. • Includes two independent hydraulic safety blocks. • Motorized hydraulic group with pre-fill valve for forward and reverse flow. Constant power, variable flow pump. • Equipped with a directional control valve, a pressure relief valve, a decompression valve, and an air-oil cooling system. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen, model KTP-700 CONFORT, located in the control cabinet. It allows programming of semi-automatic and automatic operating modes, power, stroke, and dwell time. It has a memory capacity of 300 recipes, with each recipe capable of programming all previous values. • Electrical and hydraulic maneuvers are redundant and self-controlled. It includes an additional safety block and self-checking devices for maneuvers and safety. It includes verification and certification of correct operation and the safety distance for photocells. • Operation is via a low-voltage electric pedal. • For safety, lasers and work area protection with Category IV photoelectric barriers are integrated.

Condition: used, Year of construction: 2025, Functionality: fully functional, total height: 2,910 mm, total width: 900 mm, total length: 650 mm, pressing force: 150 t, table width: 900 mm, table length: 650 mm, operating speed: 220 mm/s, overall weight: 6,000 kg, reverse speed: 220 mm/s, ram plate width: 750 mm, ram plate length: 500 mm, ram stroke: 400 mm, working height: 950 mm, pressure: 290 bar, pressing speed: 8 mm/s, Equipment: documentation/manual, safety light barrier, Here we show you a stock press from our factory that we built for demonstration purposes at trade fairs. TECHNICAL DATA: Force 150 t Motor power 11 kW Cylinder stroke 400 mm Variable working speed 8 - 0 mm/sec Approach speed 220 mm/sec Return speed 220 mm/sec Working pressure 290 bar Table size 900 x 650 mm Ram size 750 x 500 mm Open height 650 mm Working height 950 mm Width 1,360 mm Depth 2,135 mm Height 2,910 mm Weight 6,000 kg Ielhcdwewkvkto Ejaw We have developed motorized screw pumps of the CR/SERVO series with low consumption and energy savings of 60%. They were specifically designed for high-performance stamping, drying, and punching operations. The latest generation of CR-SERVO presses have evolved to offer a wide range of applications, including the ability to integrate these machines into automated production lines. STRUCTURE: The steel frames of this series consist of an electro-welded structure made exclusively of S355JR iron. They are stabilized and mechanized until the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software, this guarantees our high standards of precision and quality. They feature an upper and lower table/ram plate made of C45E acrylic, equipped with T-slots according to DIN 650. The upper plate guarantees perfect parallelism thanks to two 50 mm diameter lateral guides and maintenance-free housings. HYDRAULICS: Single-acting main cylinder with liner, chrome-plated piston, and maintenance-free wear-resistant guides. Two double-acting side cylinders with chrome-plated emblems and guides have been installed for rapid approach and retraction. Rexroth hydraulic group with servomotor and control gear, including a control gear for approach and retraction and a constant-power, constant-speed piston controlled by the servomotor system, backstop, pressure relief valve, spindle shut-off valve, and air cooling. ELECTRICALS: Includes a SIEMENS SIMATRIC S7 1200 PLC and a 7' MPT-700 orientable control panel as standard. Allows programming of power, travel distance, and speeds, with a memory capacity of 300 programs. The electrical and hydraulic valves are redundant and automatically controlled. They include an additional safety block and automatic valve and safety control devices. Correct operation and safety distance for the photocells are verified and certified. Operation is via a low-voltage electric foot pedal. To ensure safety, Type 4 PLe electric safety barriers, two practical side guards with safety valves, and interior LED lighting are installed in the front work area. Meets all essential health and safety requirements according to the CE standard.

Condition: good (used), Year of construction: 1995, For sale Hydraulic press PYE-63S The price given in the advertisement is a net price to which VAT should be added Iajlhjv Uxttscdw Esw

Condition: used, AGOSTINO COLOMBO G250 Iaslhcdev Sya Aow Ejw

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard Iaelev Rwu Ushcdw Esw with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: good (used), Year of construction: 2014, volume flow: 1,570 m³/h, Vacuum pump Becker Variair RV 2.1944/10 Relative pressure: +410 mbar Iaeljv Anv Tehcdw Esw Volume flow: 1570 m3/h Weight: 60 kg + 21 kg inverter

Condition: new, Year of construction: 2025, throat depth: 375 mm, pressing force: 200 t, table width: 750 mm, table length: 1,000 mm, table height above floor: 850 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use Islhcdovzkvgsw Eoaw - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 200 PRESSURE (TONS) 200 STROKE (MM) 800 THROAT DEPTH (MM) 375 TABLE – RAM DISTANCE (MM) 900 TABLE DIMENSION (MM) 750X1000 PRESS DEPTH (MM) 1500 PRESS WIDTH (MM) 850 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2900 MAIN CYLINDER DIAMETER (MM) 320 ENGINE POWER (KW) 22 WEIGHT (KG) 11500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: new, Year of construction: 2025, throat depth: 350 mm, pressing force: 150 t, table width: 700 mm, table length: 1,000 mm, table height above floor: 850 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes Iaolhevzkvaecdw Eew - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 150 PRESSURE (TONE) 150 STROKE (MM) 700 THROAT DEPTH (MM) 350 TABLE – RAM DISTANCE (MM) 800 TABLE DIMENSION (MM) 700X1000 PRESS DEPTH (MM) 1400 PRESS WIDTH (MM) 800 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2800 MAIN CYLINDER DIAMETER (MM) 280 ENGINE POWER (KW) 18.5 WEIGHT (KG) 10500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: excellent (used), total height: 3,950 mm, Hydraulic press single column PHY 160 C with die cushion, year of manufacture 2007 - latest UVV - machine can be repainted on request Pressing force: 160 t Installation height: 800 mm Stroke: 600 mm Table size: 1000 x 700 mm Drawing cushion: 40 t; stroke: 300 mm Weight: 11 t Connection: 22 KW - path - pressure - time - dependent ram setting Ijlhovy U Eijcdw Eeaw - light curtain (single-stroke, two-stroke, protective operation) - vibration feet

Condition: used, Year of construction: 1964, pressure 10 t throat 235 mm stroke ca. 400 mm stroke speed - idle stroke downwards 4,5 m/min stroke speed - idle stroke upwards 10 m/min dayligth ca. 500/600 mm table-size ca. 450 x 400 mm ram hole 32 mm total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,95 x 0,45 x 2,1 m Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, Iolhcdwovgnqfe Eeaw the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Iaslhcdwevc Ax No Eew Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s Iolhcdwjvc Awxe Esaw ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *