PHU JULES Tomasz Sobkowicz

Condition: good (used), Year of construction: 2001, functionality: fully functional, VDF Boehringer DUS 800 Ti Year of manufacture: 2001 Control system: Siemens SINUMERIK with Boehringer ManualTurn interface Turning length: approx. 3,000 mm (3 meters) Turning diameter: 800 mm Lasdpfx Ajzmf T Tsfted Spindle speed up to 1600 rpm Spindle hours: 4,163 h (total machine operating time: 8,676 h) 1x Large chuck 2x Matching steady rests

Condition: good (used), Year of construction: 1986, turning diameter: 1,320 mm, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Laedpozlyu Aofx Aftsd Total power requirement: 45 kW Machine weight approx.: 18 t

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement. Ljdpfx Aszkpu Aoftead

Condition: good (used), Year of construction: 2007, cycle controlled lathe Ljdpfx Aezizd Tjftead Machine type: Weiler E 120 x 3.000 Control: Weiler D3 Year: 2007 Power on time: ca. 41.000 h SPECIFICATIONS Max. turning length: 3.000 mm Turningdiameter: 830 mm Max. swing over bed: 1.200 mm Bettbreite 600 mm Spindle bore: 165 mm Spindelkopf DIN55027 Gr 15 Collets: Forkardt 3KS 800mm Spindle speeds: 1 - 280 / 4 - 900 rpm Transmission ratio: 2 Torque: 8.000 Nm Amount of turrets: 1 Sauter 4-Fach Kopfrevolver für 140mm Aufnahmen Tailstock Quill diameter: 140 mm quill range: 400 mm Equipment Electronical handwheel Hydraulisches Kraftspannfutter Forkardt 3KS 800mm Chip conveyor

Condition: good (used), Year of construction: 2023, cycle controlled lathe Machine type: Seiger SLZ 620 SK x 3000 Control: Heidenhain 620 Year: 2023 Laodpfx Afeziy Nbjtsd SPECIFICATIONS Bed width: 400 mm Between centers: 3.000 mm swing over bed : 660 mm Facing diameter: 435 mm Main Spindle Spindle speeds: 1 - 2.500 rpm Spindle power: 30 / 22 kW Torque: ca. 2.000 Nm Tool: Parat Tailstock: MK 5 Quill diameter: 90 mm quill range: 180 mm Equipment Toolholders: Parat cooling system Software: Stufe 3

Condition: good (used), Year of construction: 2001, Used lathe from Chevalier Type: FCL 32120 F Max. turning length: 3000 mm Turning diameter above the bed: 815 mm Turning diameter above the carriage: 470 mm Bore: 134 mm Fagor graphical control system Laodpfxezhlw Uo Afted Tool post included Year of manufacture: 2001

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 Lsdpfezhcfvex Aftsad rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Condition: excellent (used), Year of construction: 2017, Universal lathe Seiger SLZ-620E Machine no. 4758 Year of manufacture 2017 Control system Siemens 840D Solution Line with Operate user interface (incl. Ethernet interface) Distance between centers 2000mm Swinging diameter over bed 660mm Swinging diameter over cross slide 435mm Travel of cross slide 375mm (position measurement via glass scale) Headstock according to DIN55027 GR.8 Spindle diameter in front bearing 130mm Spindle bore 93mm Main spindle internal taper 100 Drive power 60/100% ED 30/22kW Spindle speed 1-2500 rpm Max. torque at the spindle approx. 2000 Nm Feed force Z-axis 14,000 N Feed force X-axis 10,000 N Feed range longitudinal and transverse mm/rev Rapid traverse speed X/Z 10/8 m/min Tailstock MK5 Quill travel 180mm Quill diameter 90mm Workpiece weight between centers 1000kg Workpiece weight in chuck (overhanging) 500kg Machine weight approx. 4900kg Machine dimensions L x W x H 4,100/2,350/1,900 Accessories/Equipment: - 3-jaw chuck D320mm - 15 tool holders - "Drill stand" drill rod clamping device D60mm - Chip guard and adjustable protective cover with viewing window - Machine lamp - Coolant system (coolant pump reinforced, 5.4 bar) - Parat 4-position turret (manually operated) - Glass scale X-axis - Documentation - Chip conveyor - Manual flushing gun - 1x steady rest clamping range 20mm to 150mm - 1x steady rest clamping range 120mm to 270mm Lasdszgrtgepfx Aftsd The machine is in very good condition.

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle turning lathe with FAGOR 8055, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 2 steady rests (small + large), and chip conveyor Manufacturer: MICROTURN, Origin: Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height 350 mm Laodpozfqdnsfx Afted Distance between centers 4000 mm Swinging diameter over bed 690 mm Swinging diameter over cross slide 450 mm Swinging diameter in the gap 870 mm Spindle speeds 0 – 2400 rpm Spindle bore 82 mm Spindle motor 15 / 22 kW Machine dimensions + chip conveyor L x W x H 7350 x 2450 x 2050 mm Machine weight 6,800 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keypad o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Hinged chip conveyor • 2 fixed steady rests (1 x small, 1 x large) • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm Lasdozdn S Hepfx Aftod face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine xH: 4,3 x 2,5 x 1,95 m Oil Country Lathe Special machine for machining long bars and pipes. For sale is an extremely robust and precise WEILER E70 x 2000 heavy-duty lathe, manufactured in Germany to the highest quality standards. The machine is ideally suited for: ·Single-part production ·Repair work ·Toolmaking ·Heavy-duty machining applications in industry The WEILER E70 impresses with its: ·High rigidity and stability ·Large spindle bore capacity ·Excellent torque performance Perfect for machining: ·Large shafts ·Flanges ·Pipes ·Heavy workpieces Tool holder: Multifix size C *

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000with Siemens Sinumerik 810D Cycle Control (Teach-In)The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.Working AreaDistance between centers: 3,000 mmSwing diameter over bed: 1,200 mmSwing diameter over cross slide: 850 mmCross slide travel: 620 mmBed width: 750 mmSpindleSpindl e nose: DIN 55027 size 11Spindle diameter front bearing: 190 mmSpindle bore: 104 mmSpeed range: 5 – 900 min⁻¹Max. torque: 6,000 NmMain DriveDrive power: 37 / 52 kW (100% / 60% duty cycle)FeedX-axi s feed force: 24,000 NZ-axis feed force: 16,000 NRapid traverse X: 7 m/minRapid traverse Z: 4 m/minTool HolderTurning tool cross-section: 40 × 40 mmElectrical DataSupply voltage: 400 VFrequency: 50 HzMax. current consumption: 200 AWorkpiece Weights(Manufacturer specifications for standard configuration)Between centers without steady rest: 5,000 kgBetween centers with 1 steady rest: 6,000 kgBetween centers with 2 steady rests: 7,000 kgFlying in faceplate: 1,800 kgChip Conveyor2 x AME Chip ConveyorsManufacturer: AME GmbH, EmsdettenType: S8 300 Tlg. 63Year of manufacture: 05/2016Not Included:TailstockSteady restsNoteThe machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Serial number: 990101 Ledpfx Aozdd E Rsftead Tip width: 3000 - mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: excellent (used), Year of construction: 2002, Technical Data WEILER E90 x 6000 precision lathe with cycle automation. The machine is in very good condition, considering its age. Maintenance has been documented. The Brio milling attachment allows for milling operations such as hexagon milling and the milling of grooves. Year of manufacture: 2002 Control system: Siemens Work area: Swinging diameter over bed: 900 mm Swinging diameter over cross slide: 530 mm Bed width: 600 mm Turning length: 6000 mm Lajdpfx Ajzagkhjftsd Spindle and drive: Spindle bore: 128 mm Spindle diameter in the front bearing: 178 mm Speed range: 1 to 1120 min⁻¹ Main drive with 2-stage gearbox: 45 / 37 kW Tailstock: Quill diameter: 140 mm Quill stroke: 300 mm Internal taper: MK 6 Dimensions and weight Machine weight: 13,000 kg Dimensions (L x W x H): 8400 x 2600 x 2150 mm Equipment and accessories: Indexing device for main spindle Milling attachment Brio BF90, mount: SK50, drive power: 11 kW Turret with quick-change tool holder Heidenhain linear scale in the X-axis Chip conveyor Many tools, including tool holders, supports, steady rests, 3 x 3-jaw chucks (900 mm, 600 mm, 300 mm), drills, and other accessories – see photos.

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control Siemens SINUMERIK 810D pl turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Ledpfjzaf Hnjx Aftsad #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details turning diameter 815 mm turning length 3000 mm control ECS 2402 swing over bed 815 mm Lajdpfx Ajzaa Nqefted centre distance 3000 mm swing diameter over slide rest 485 mm spindle bore 137 mm spindle turning speed range 1200 U/min rapid traverse 5 m/min spindle motor 28 kW tailstock quill diameter 115 mm tailstock quill stroke 250 mm total power requirement 30 kW weight of the machine ca. 7,0 t dimensions of the machine ca. 5,87 x 2,10 x 2,10 m Additional information Equipment: * CNC-control E.C.S. 2402 * 3-jaw chuck * 4-jaw faceplate, diameter 700 mm * 4-jaw faceplate, diameter 400 mm * 3 Steady rests * Chip Conveyor Without boring bar holder and boring bar.

Condition: excellent (used), Year of construction: 2013, turning diameter over cross slide: 640 mm, spindle bore: 63 mm, turning length: 2,000 mm, quill diameter: 100 mm, total length: 5,200 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 8,200 kg, rotational speed (min.): 2,500 rpm, three-jaw chuck diameter: 315 mm, CNC Lathe VDF BOEHRINGER - DUS630Ti MACH-ID 9628 Make: VDF BOEHRINGER Type: DUS630Ti Control: Heidenhain Manuel Plus Year: 2013 Lsdpfx Aey T Hlmoftoad Steady rest fixed 400 mm Steady rest open 120 mm ROHM 3 chuck  Ø 315 Multi Fix tool holder system with inserts Manuel Plus controller Swing over bed Ø: 640mm Swing over cross slide Ø:385mm DBC Turning Length: 2000mm Spindle bore: 62mm Spindle power: 22kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 5Mk Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 10000mm/min. Length: 5200mm Width: 2100mm Height: 2100mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1997, turning length 1500 mm greates pass round over bed 490 mm turning dia. over face-slide 280 mm control Heidenhain Manual Plus Speed range - up to 3000 U/min spindle bore 65 mm power capacity - workpiece power 12/16 (100/60%) kW weight of the machine ca. 3,5 t Equipment/Accessories: - Steady rest - Chuck - Tool holders Lajdpfey Ty Egex Afted - Drill bits - Tips - Multifix holder

Condition: new, Year of construction: 2025, - New machine - Precision lathe with automatic cycle control, for chuck and shaft machining. Brand: WEILER | Model: E 120 x 4500 | Year of manufacture: 2025 The precision giant. A powerful and energy-efficient production lathe with optimum accessibility. The machine for heavy workpieces. Maximum cost-effectiveness from turning to milling. Precise and universally applicable, it impresses with: - State-of-the-art control and drive technology - Extremely simple operation and programming - Highest accuracy - Longevity - User-friendly ergonomics TECHNICAL DATA / ACCESSORIES, EQUIPMENT: Control system: Weiler cycle control ONE 1 (Siemens) Working range: - Centre height: 600 mm - Swivel diameter over bed: 1.200 mm - Swivel diameter over cross slide: 830 mm - Centre distance: 4.500 mm Extensive, high-quality equipment. Sales within Germany include a 24-month warranty. No guarantee is given as to the completeness and accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on the equipment Ljdpfey Hfy Ajx Aftsad available on request.

Condition: used, Year of construction: 1995, turning diameter over cross slide: 515 mm, spindle bore: 128 mm, turning length: 2,000 mm, turning diameter: 820 mm, quill stroke: 280 mm, quill diameter: 125 mm, quill travel distance: 280 mm, feed length X-axis: 520 mm, workpiece weight (max.): 3,150 kg, rotational speed (max.): 1,600 rpm, workpiece weight between centers: 3,150,000 g, Technical data in the attachment. Laodsy Emrdepfx Aftjd

Condition: used, YOM 2013 Chuck Size – 150mm Bar Capacity – 53mm Swing – 430mm Spindle Speed - 4,000 RPM Control - Siemens 802D Distance Between Centers – 1000mm X-Axis Travel – 220mm Lasdpfoy Dtuijx Afted Z-Axis Travel – 1065mm Swing Over Cross Slide – 200mm Motor – 10 HP 4-Way Tool Post Tailstock Over Dimensions (Approx.) 2.75m x 1.3m Weight (Est.) 2800kgs

Condition: ready for operation (used), Year of construction: 2006, spindle bore: 130 mm, turning length: 600 mm, turning diameter: 1,800 mm, Turning diameter 1800 mm Turning length 600 mm Control Siemens 840 D Powerline 6-jaw chuck Laodoy Aw Svepfx Aftod Spindle bore 130 mm Spindle nose DIN 55027 size 11 Spindle speed range 1 - 400 rpm Spindle torque 9000 Nm Total power requirement 38 / 52 kW Machine weight approx. 25 t

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 370 mm, spindle bore: 80 mm, turning length: 2,000 mm, turning diameter: 610 mm, spindle speed (max.): 1,800 rpm, Swing diameter over bed 610 mm, over cross slide 370 mm. Distance between centers 2000 mm. Spindle bore 80 mm. Speed range 40 - 1800 rpm. Tailstock: quill travel 150 mm, Morse taper 5. Includes Siemens 810D manual turn control, steady rest, Parat toolpost, coolant system. Three-jaw chuck D 315 with various jaws, chuck mounted on spindle rear side. Manual, CE declaration. Laodpfoyzmk Eox Aftod

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret • 2 fixed steady rests with rollers • Movable control panel Laedpjyy Nlpsfx Afted • Automatic lubrication of headstock • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically operated quill • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1997, Technical details: turning diameter over bed: 550/500 mm turning dia. over face-slide: 290 mm turning length: 1500 mm turning diameter over support: 290 mm centre distance: 1500 mm spindle passage: 68-70 mm control: Fanuc/Siemens range of revolution per miute: 3 - 2800 U/min tailstock quill stroke: 160 mm Ljdpfx Afjyya H Dotjad Weight approx.: 3,3 t dimension machine xH: 3,33 x 1,55 x 1,79 m Multiflex quick-change holder size C *

Condition: used, Year of construction: 1998, turning diameter 650 mm turning length 2000 mm control MTC K turning diameter over slide rest 360 mm turning speeds 1800 U/min 3-jaw chuck 315 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Lodpfxjyutrhj Aftead About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2006, turning diameter 550 mm Lajdpeyuqgvofx Aftjd turning length 3100 mm control Fagor 8055T turning diameter over slide 310 mm turning dia. in gap 790 mm length of gap 283 mm spindle passage 51 mm turning speeds 80-3500 U/min Power 15 KW 3-jaw chuck 250 mm steady 220 mm workpiece weight 2000 kg The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team