Basilico Macchine srl

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Bodex A Tinspfx Ab Telr Total number of drilling spindles: 14 Total number of tool changer positions: 6

Condition: used, machine/vehicle number: 008257, X axis working area: 3760 mm Y axis working area: 1550 mm Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 12 Bledpfx Abjx A Td Se Tsr

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Bodpsx A Tcusfx Ab Telr Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 008088, X axis working area: 3700 mm Y axis working area: 2100 mm Working Table: Flat table Main Electrospindle power: 9 KW Bjdjx A Hbqjpfx Ab Tolr Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Bljdpfx Ajx A E Tfjb Tor Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3275, Handling concept 2, consisting of Lift table, Section bridging by roller conveyor Vacuum arm for positioning material Pneumatically lowerable stop fences Push off device Dust extraction hood for protective boards Dust extraction channel at outfeed from below Transport belt 4050 x 2250mm 14-position tool changer Bledjx Ap Akjpfx Ab Tor Simultaneous push off and infeed Table Length: 3100mm Table Width: 2250mm Thickness: 100mm X/Y: 96m/min Z: 20m/min 3 Vacuum pumps with a total vacuum capacity 900/1080m3/h 4 Pneumatically lowerable stops 9Kw main spindle – liquid cooled Aggregate interface main spindle c-axis Flex 5 interface for c-axis Ait Jet integrated in extraction hood 12 vertical drilling spindles, including quick-change system Grooving saw swivelling 90 degrees Tool Change Assistance Device Tool length Control PowerTouch with power control hardware CE Weeke Quality Pack Energy Saving Mode

Condition: good (used), Infotec 1008 Rotary CNC machine Blodpfx Asx Ai T Njb Tjr adjustable RPM, manual or auto, 3Ph

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, TECHNICAL DETAILS Number of milling spindles: 1 pc. Blodpfx Absx Ahgus Ter Number of controlled axes: 5 pcs. Type of milling table: Beam table MACHINE DETAILS Weight: 3,450 kg EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT K2 Numerically controlled machining center ROVER A 3.40 FT K2 Working fields: X = 3685 mm; Y =1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Bjdpfx Asx Afvtjb Telr Vacuum Pump 300 m3/h 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowingunit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with mats (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,500 mm, Next to new nesting CNC machining center 4-axis nesting CNC machining center. Purchased new in 10/2019. Has been used for less than 900 hours. The business for which the machine was acquired ceased due to the Corona pandemic, and usage has therefore been very minimal. The machine has been connected to an AL-KO extraction system, which is also for sale in a separate listing. Table size 3600x1500 mm. The machine can be used as a nesting table machine or, by removing the panel, vacuum pods can be used to raise the workpiece for machining. The machine is in full working order in all respects and is an excellent alternative to a new machine. Automatic 10-position tool changer, 2 x Busch rotary vane vacuum pumps (250 m³/h each). The work area can be divided into two separate zones. Drilling unit for vertical and horizontal drilling. Slot saw. Automatic tool height measurement (enables processing the same job with several tools without noticeable height differences). Supplied with bSolid software in Finnish. Suitable saw aggregate and planer aggregate also available for sale. The machining unit features collision sensors, so safety fencing is not required. The buyer is responsible for all costs related to relocation, including the preparation and transport of the machine (these services can be arranged, for example, through the machine's importer). Blodpfoxz Rfqox Ab Ter

Condition: used, Year of construction: 2001, Price: On request Bedpjxzcnkofx Ab Telr What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA1/011994 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 0-250-05-2110, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,730 mm, travel distance Z-axis: 280 mm, total length: 8,400 mm, total width: 4,660 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 7,500 W, Equipment: rotational speed infinitely variable, Very well-maintained WEEKE CNC machining center BP 155 Bedpfxjxy Snws Ab Tjlr The machine is operational and can be tested at any time. A forklift for loading is also available.

Condition: like new (used), Year of construction: 2025, operating hours: 900 h, functionality: fully functional, machine/vehicle number: M-06 1292 5014 25, total height: 2,150 mm, total length: 1,700 mm, total width: 5,250 mm, table width: 5,000 mm, table length: 1,420 mm, table load: 200 kg, overall weight: 680 kg, We are offering the vacuum press with integrated pressing time control and MAX-CONTROL PLC control system for sale. Transport and any costs incurred as a result, such as customs clearance, are the responsibility of the buyer. Bsdpfsxy Sdfex Ab Tslr

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: S/N 320.01.001.22, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 35 kVA, controller manufacturer: WoodFlash 4.1, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, table width: 2,100 mm, table height: 895 mm, table length: 3,200 mm, overall weight: 4,500 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, CNC Machining Center / 3-Axis CNC Router Format 4 Profit H102232 S/N 320.01.001.22, year of manufacture 2022, with control system, HSK63 tool holder, Axis travel: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, including 2 Becker VTLF2.250/0-79 vacuum pumps, year of manufacture 2021, including loading table, discharge conveyor, 8-position tool changer, Bledpfx Ajxy Abujb Tsr working area approx. 2,800 x 2,060 mm, groove saw unit in X and Y direction, horizontal drilling in X and Y direction, two spindles each, DH 16 drilling unit, vertical drilling: 5x in Y direction and 7x in X direction, main spindle approx. 10 kW, X-axis speed approx. 100 m/min, Y-axis speed approx. 100 m/min, Z-axis speed approx. 30 m/min.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: S/N 320.09.003.17,, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 28 kVA, controller manufacturer: WoodFlash 4.1, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, table width: 2,100 mm, table height: 895 mm, table length: 3,200 mm, overall weight: 4,500 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, Equipment: documentation/manual, CNC Machining Center 3-Axis CNC Router Format 4 Profit H10 2232 S/N 320.09.003.17 Year of manufacture: 2017 Tool holder: HSK63F Axis travel: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, Including 2 vacuum pumps Becker VTLF2.250/0-79, Year of manufacture: 2017 Including loading table and discharge conveyor 8-position tool changer Working area approx. 2,800 x 2,060 mm Slot saw unit for X and Y directions Horizontal drilling in X and Y, two spindles each, drilling unit DH 16, Bodpjxy Abhofx Ab Tjlr Vertical drilling: 5x in Y direction, 7x in X direction, main spindle approx. 10 kW X-axis speed approx. 100 m/min, Y-axis speed approx. 100 m/min, Z-axis speed approx. 30 m/min

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 11 kVA, torque: 4 Nm, controller manufacturer: WoodFlash 4.1, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, table width: 2,100 mm, table height: 895 mm, table length: 3,200 mm, overall weight: 4,500 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC Machining Center 4-Axis CNC Router Format 4 Profit H10 2232 S/N 320.09.002.17 Year of manufacture: 2017 Tool holder: HSK63F Travel distances of the axes: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, C-axis present Including 2 Becker vacuum pumps VTLF2.250/0-79, year 2017 Incl. loading table + discharge conveyor 8-position tool changer Working area approx. 2,800 x 2,060 mm Groove saw unit in x and y directions Bsdpfjxy Aa Djx Ab Telr Horizontal drilling in x and y directions, two spindles each, drilling unit DH 16 Vertical drilling: 5 in y-direction and 7 in x-direction, main spindle approx. 10 kW X-axis speed: approx. 100 m/min, Y-axis speed: approx. 100 m/min, Z-axis speed: approx. 30 m/min

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, this machine is 2 tactical table tenoning CNC. The condition is practically brand new. It was purchased for the project that failed to launch so it has only several hours on the clock. It's a great deal with considerable discount, because it did cost 18000EUR Bsdpfx Asxyxzqeb Tolr

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 95470017, workpiece length (max.): 13,000 mm, workpiece width (max.): 600 mm, workpiece height (max.): 300 mm, saw blade diameter: 640 mm, Equipment: CE marking, TECHNICAL DETAILS Workpiece width min.: 100 mm Workpiece width max.: 600 mm Workpiece thickness min.: 70 mm Workpiece thickness max.: 300 mm Workpiece length: max. 13,000 mm Saw unit Blade diameter: 640 mm Feed speed: max. 80 m/min MACHINE DETAILS Power Spindle power per spindle: 17 kW Total connected load: 70 kW EQUIPMENT Portal with mobile positioning carriage Machining on 6 sides without rotating the workpiece Double 5-axis machining unit with 12-position HSK-E63 tool holder CAD/CAM data import Bljdpfxexykb Ne Ab Ter Software type: TPA ALBATROS EDICAD Automatic central lubrication Spindle liquid cooling CE certification

Condition: new, Year of construction: 2025, functionality: fully functional, CNC machining center NESTING with fully automatic loading and unloading As with all Nesting machines: various sizes, line drilling, Becker vacuum pumps, CadCam Nesting software, CNC controller, remote control, servodrive, etc. The best machine is the one that fits your company. Specify which configuration you require. We guarantee reliability (see the photos) Prices starting from €85,000 – New machines You can call or WhatsApp us for more information and/or to make an appointment. WhatsApp: We handle transport, customs clearance, and delivery to your location. Bedpfoxx Uc Uex Ab Tolr Machine instruction – extra warranty – 7/24 support

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 25 m/min, number of spindles: 16, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Numerical Pegasus-Cad software Working area in X - 3050mm Working area in Y - 1220mm 2 working zones Lifting feed table, stackable Automatic loading system, Schmalz type Label printing system with automatic application on the loading table ATC 3-axis vertical electrospindle, 13.2 kW, with automatic tool changer, ISO 30 Automatic tool change system with 16 positions - positioned at the rear of the machine Automatic tool change system, carousel for fast changeovers Bjdoxx T R Dspfx Ab Telr Automatic unloading system with motorized conveyor belt Automatic worktable cleaning system Protection and safety system with light curtain and fencing Automatic lubrication system 250 m3/h - 5.5 kW vacuum pump Contact by phone: 0031634707163 Transport, installation, and user training negotiable Danmar Machines BV Almelo

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AL/008514, workpiece height (max.): 60 mm, table width: 1,000 mm, table length: 3,000 mm, empty load weight: 2,800 kg, TECHNICAL DETAILS Bljdpsxx Sg Dofx Ab Ter Working area: 3,000 x 1,000 mm Max. workpiece height: 60 mm Upper Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW Lower Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW 2 panel gripper clamps Manual loading of parts onto the Flotex table Automatic part unloading Automatic lubrication Safety screens EU regulations MACHINE DETAILS Control: PC and Xilog Plus software Weight: 2,800 kg Electrical Data Rated voltage: 400 V Phases: 3+N Rated current: 49 A Frequency: 50 Hz Short-circuit rating: 10 kA

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-250-12-2554, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, TECHNICAL DETAILS Blodpfoxx R Slsx Ab Ter Minimum part dimensions (X, Y, Z): 250 mm x 100 mm x 8 mm Maximum workpiece dimensions (X, Y, Z): 3,000 mm x 1,000 mm x 80 mm Upper vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) Lower vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS CNC control: PC 85 Software: woodWOP 6 Electrical data Voltage: 380 V Frequency: 60 Hz Phases: 3 Power: 62 kW Current: 125 A Control voltage: 24 V EQUIPMENT Simultaneous processing of two panels Safety enclosure for the working head No. 2 clamps for fixing and moving the workpiece Loading station with air cushion Discharge of panel(s) via motorized roller conveyor Safety system with perimeter fencing and front safety mats

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 35079, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,140 mm, travel distance Z-axis: 160 mm, empty load weight: 600 kg, TECHNICAL DETAILS Travel range X-axis: 3,060 mm Travel range Y-axis: 1,140 mm Travel range Z-axis: 160 mm Number of working fields: 2 Drilling head spindles vertical X-axis: 7 Drilling head spindles vertical Y-axis: 6 Drilling head spindles horizontal X-axis: 4 Drilling head spindles horizontal Y-axis: 2 Vacuum pump capacity: 250 m³/h MACHINE DETAILS Weight: 600 kg Number of electrospindles: 1 Electrospindle power: 12 kW Tool changer positions: 10 Taper type: ISO 30 Electrical data Supply voltage: 380 V AC Rated current: 44 A Number of phases: 3 Power: 26.1 kW EQUIPMENT Bodpfxjxx Rr Ee Ab Tslr Bar worktable 6 adjustable bars for suction cup support 2 adjustable vacuum suction cups per bar with sealing Independent saw blade group for grooves in X-axis Front photocell guard and safety system Automatic lubrication system Conditioning system for cooling and cleaning the machine control

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 1,550 mm, feed rate X-axis: 96 m/min, feed rate Y-axis: 96 m/min, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,700 mm Travel Y-axis: 1,550 mm Stroke X-axis: 4,538 mm Blodpfx Abjxw Up Ss Tsr Stroke Y-axis: 1,952 mm Maximum workpiece clearance: 100 mm Movement speed X-axis: 96 m/min Movement speed Y-axis: 96 m/min Movement speed Z-axis: 25 m/min Number of controlled axes: 3 axes Number of drilling spindles: 7 Number of tool positions: 8 Nesting Table Length: 1,550 mm Width: 3,700 mm Material: Bakelite Number of pumps: 4 Individual capacity: 108 m³/h Drilling Unit Unit: top Spindles for vertical drilling: 7 Milling Unit Unit: top Number of controlled axes: 3 automatic tool changer: yes Motor power: 9 kW Max. speed: 24,000 rpm MACHINE DETAILS Installed total power: 26 kW EQUIPMENT Vacuum pump Control system PC85 Software WoodWOP CE marking Safety light curtains Note: Tools are not included in the offer.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, spindle speed (max.): 18,000 rpm, number of axes: 5, TECHNICAL DETAILS Bledpfx Aexw Ukcob Tsr Travel range X-axis: 2,500 mm Travel range Y-axis: 1,300 mm Number of tool stations: 16 Drilling unit Unit: top Spindles for vertical drilling: 7 Total number of vertical and horizontal spindles: 7 Milling unit Unit: top Number of controlled axes: 5 Automatic tool changer Motor power: 7 kW Max. speed: 18,000 rpm MACHINE DETAILS Installed total power: 20 kW EQUIPMENT Nesting Protective structure of the units Safety sensors Protective grids mounted on the machine