Montagetec GmbH

Condition: used, Year of construction: 2020, Overview This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQ's warehouse in Germany from early September 2026. Technical data - Manufacturer: Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany) - Model: VFA - Year of manufacture: Machine type: vertical bottle conveyor with two carrier chains, side grip - Product: glass bottles, Ø 68.8 mm, height 228 - 248 mm - Nominal capacity: 45,500 bottles/hour - Conveying speed: approx. 60 m/min at 50 Hz - Speed range: approx. 24 - 104 m/min at 17 - 87 Hz - Width adjustment: 20 - 150 mm, manual by hand crank - Carrier chain: type LF 114 SS - L2 NK, 114.3 mm wide, 30.48 m - Drive motor: SEW, 2.2 kW, 230/400 V, 50 Hz, IP 56, suitable for inverter operation Pgedpfx Aozw Em Usk Her - Gearbox: Stöber, ratio i = 9.31 - Compressed air: 6 - 10 bar, 1/8" connection - Central lubrication unit: 230 V, 50 Hz, 0.75 A - Overall height: approx. 4,185 mm - Operating environment: enclosed rooms, 5 - 40 °C Equipment - Pneumatic chain tensioning station - Automatic central lubrication system - Transparent protective guarding around the conveyor section - Service doors with RSS36 safety switches - Hand crank for width adjustment - Original Gronemeyer documentation: operating manual, installation drawing, gearbox, motor and lubrication system documents Condition Used - currently being dismantled; from early September 2026 it can be inspected in dismantled condition. Scope of supply and spare parts are agreed during the offer stage. Availability From early September 2026. Location: BEVMAQ warehouse, Germany. Loading by arrangement.

Condition: used, Year of construction: 2005, machine/vehicle number: LC671, Used Tetra Pak A3 flex 100V 330 prismaTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak aseptic carton filling and packaging solution configured for 330 ml Prisma cartons. The central filling machine is a Tetra Pak A3 FLEX 100V, built in 2005, designed for Brik carton handling with a pull-tab configuration. The line also includes a new Tetra Pak Cap 30 FLEX cap applicator, built in 2026, configured for 330 ml Prisma cartons with Dream Cap closures.Filling machine: Tetra Pak A3 FLEX 100VFiller year: 2005Carton format: 330 ml PrismaCarton type: Brik cartonClosure configurations: pull tab and Dream CapCap applicator: Tetra Pak Cap 30 FLEX, built in 2026OPTIONAL: Accumulator ACHX30 - 2010, 14713H Advanced Automation & Control SystemsThe equipment features an integrated operator HMI/control panel, electrical control cabinet, pneumatic service components, mechanical drives and adjustable machine mechanisms. The filling and cap-application stations are intended to operate as coordinated industrial packaging equipment, supporting controlled handling of carton material, carton formation, filling, closing and downstream transfer. Operator access areas include service platforms, stairs and access panels for operation and maintenance activities.Production Line Integration CapabilitiesThis complete aseptic carton line is arranged around the filling machine and cap application process for 330 ml Prisma Brik cartons. It can be integrated with product preparation, upstream aseptic processing and downstream industrial packaging machinery according to the intended beverage production layout. An optional accumulator is available to provide carton buffering between line sections and help maintain production continuity during downstream interruptions.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX 100V2005Capping MachineTetra Pak Cap 30 FLEX2026Accumulation SystemACHX302010Machine Condition & Maintenance HistoryThe line includes a used Tetra Pak A3 FLEX 100V filler built in 2005 and a new Tetra Pak Cap 30 FLEX cap applicator built in 2026. The optional used ACHX30 accumulator was built in 2010 and records 14,713.8 running hours. The stainless-steel enclosure, service platform, access ladder, pneumatic tubing, conveyor or product-transfer sections and machine adjustment components are visible on the equipment.Operational Performance & VersatilityThe Tetra Pak aseptic carton filling s... Pgjdpfxszw Dvns Ak Her

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h Pgjdjzwxu Sepfx Ak Hjr - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.

Condition: used, Year of construction: 2018, machine/vehicle number: LC667, Used GEA Aseptic line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production.* Production capacity: 48,000 bph* Available bottle format: 230 ml PET only* Main line year: 2018, 2020 (data of use)* Blowing equipment: SIPA SFR24 EVO, 48,000 bph* Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph* Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 t/h, a Tetra Pak 15,000 L/h homogenizer rated at 90 kW, a 15,000 L/h yogurt secondary pasteurizer, pulsed-light sterilizers, laser marking machines and visual inspection systems.Product preparation assets include four 25 m³/h centrifugal pumps rated at 7.5 kW, two 30 m³/h centrifugal pumps rated at 18.5 kW, one 12,000 L/h rotary pump rated at 7.5 kW and one 20,000 L/h rotary pump rated at 18.5 kW. The installation also includes a triple 100 mm high-pressure filter, model ECS7003SCA5H19-A61.Production Line Integration CapabilitiesThe PET production line integrates bottle blowing, drying, aseptic filling and capping, cap handling, labeling, coding, inspection, carton packing, sealing and conveying. A GEA conveyor chain system provides bottle transport at 20 to 60 m/min. Five bottle dryer sets with conveyors are included, together with two GEA dryers rated at 700/840 m³/h.Machine type | Manufacturer / model | YearMachine typeManufacturer / modelYearBlow Molding MachineSIPA SFR24 EVO2020 (data of use)Filling MachineGEA FILLSTAR FX AS 84 PET2020 (data of use)Labeling MachineGuangzhou Lixin AP-400H2020 (data of use)Labeling MachineGuangzhou Santuo SL-695 Pgsdpfx Akezwu Uuo Her

Condition: used, Year of construction: 1995, operating hours: 26,000 h, machine/vehicle number: LC668, Used Tetra Pak TBA 8 V100 1000ml slim, helicap 23Technical Specifications & Performance DataThis second hand Tetra Pak complete aseptic carton filling line is configured for dairy production in slim 1.0L Brik carton packages. The core of the line is a Tetra Pak TBA 8 V100 filling machine, manufactured approximately in 1995 and showing approximately 26,000 working hours. A total refurbishment was completed in 2026, followed by a test run and inspection.Main filling machine: Tetra Pak TBA 8 V100Package format: Slim 1.0L aseptic carton packageSpeed: 6.000 TP/hProduct application: Dairy productionYear of manufacture: approximately 1995Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Advanced Automation & Control SystemsThe line is supplied as an integrated industrial packaging solution comprising filling, cap application, conveyor handling and wrap-around tray packing equipment. The Tetra Pak TCAP 45/47 cap applicator has been modified for HeliCap 23 and is designed to handle screw caps with pre-punched paper packaging material. The standard-layout conveyor installation provides product transfer between the listed process stages.Machines of this type are intended to operate as coordinated packaging machinery, enabling continuous movement of filled carton packs from the filler through closure application and secondary packaging. Final operational setup should account for the selected carton material, cap components, product process interface and required line controls.Production Line Integration CapabilitiesThis used bottling line is arranged for aseptic Brik carton handling rather than conventional PET or glass bottle processing. It combines a Tetra Pak filling machine with a dedicated screw-cap applicator, approximately 30 meters of conveyors and a tray packer for wrap-around trays. The equipment is suited to integration within a dairy beverage production and industrial packaging environment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1002001Capping MachineTetra Pak TCAP 45/47ConveyorsConveyorsWrap Around PackerTetra Pak TCBP 70The line can form a practical filling and end-of-line packaging section where cartons are filled, closed, conveyed and packed into wrap-around trays. Upstream dairy processing, hygienic product supply and downstream pallet handling can be matched to the requir... Pgodpezwu Unefx Ak Her

Condition: used, Year of construction: 2001, operating hours: 26,000 h, machine/vehicle number: LC669, Used Tetra Pak TBA8 1000ml square V110, Helicap 27Technical Specifications & Performance DataThis used bottling line is configured around a Tetra Pak TBA 8 V110 filling machine for square 1.0L Brik carton packs. Manufactured approximately in 2001, the filling machine has approximately 26,000 working hours and received a total refurbishment in 2026. The line includes dedicated screw-cap application, wrap-around tray packing and interconnecting conveyor equipment for an integrated carton packaging process.Filling machine: Tetra Pak TBA 8 V110Pack format: square Brik carton, 1.0LYear of manufacture: approximately 2001Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Conveyors: approximately 30 metres, according to the standard layoutAdvanced Automation & Control SystemsThe line combines filling, cap application, conveying and tray packing into a coordinated industrial packaging arrangement. The Tetra Pak TCAP 45 cap applicator is modified for HeliCap 27 screw caps and operates with pre-punched paper, supporting the specified carton closure configuration. The conveyor system provides product transfer between the principal operating stations.Machines of this type are typically operated through dedicated machine controls and coordinated with upstream product preparation and downstream packing equipment. Functional verification, test running and inspection have been performed following refurbishment.Production Line Integration CapabilitiesThis complete carton filling and packaging line is designed for handling square 1.0L Brik packs. Its configuration supports a logical process flow from carton filling through screw-cap application, conveying and wrap-around tray packing. It is suitable for industrial packaging and beverage production applications using the stated carton format.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1102001Capping MachineTetra Pak TCAP 45Various EquipmentConveyor SystemWrap Around PackerTetra Pak TCBP 70The tray packer is configured for wrap-around tray applications, creating a practical downstream packaging stage for filled and capped carton packs. This arrangement can be considered for second hand carton packaging projects requiring a compact filling-to-secondary-packaging workflow.Machine Condition & Maintenance HistoryThe machines have been checked and are described as being ... Pgedpfxszwu Uhj Ak Her

Condition: good (used), - Revised - Tested Pgjdpfxezwpits Ak Hjr

Condition: used, Year of construction: 2005, Filling machine for the production of mineral water or carbonated beverages in PET bottles. Manufacturer: LINNEA-ZEVOS Chotebor Model: AQUAFILL 40/60/12 Psdpfxszwpbpe Ak Hjgr Capacity: 9,000 bottles per hour (1.5 L and 0.5 L) Year of manufacture: 2005 Includes accessories for 1.5 L and 0.5 L bottles. Caps: PCO 1881 Used machine, in good working order, regularly serviced.

Condition: used, Year of construction: 2015, functionality: fully functional, total width: 90 mm, total length: 136 mm, overall weight: 200 kg, input voltage: 400 V, Equipment: crane, For sale is a Speidel Braumeister 200-liter brewing system in very good condition. The brewing system was previously used but is in excellent technical and visual condition and has always been carefully maintained. Pgedpozwn U Uofx Ak Her Details: • Speidel Braumeister 200 liters • Used, but in very good condition • Ideal for ambitious home brewers and smaller commercial breweries • Location: Italy If you are interested or would like more information, please send a message. Accessories are also available for sale.

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2EG056013, overall weight: 120 kg, Equipment: documentation/manual, HEUFT PRIME complete product inspection system with DELTA-FWb rejection unit Manufacturer: HEUFT Systemtechnik GmbH We offer components of an industrial HEUFT system for automatic complete product inspection and defect rejection in filling and packaging lines. Base unit HEUFT PRIME complete product inspection system Type/Designation: HBBPRIXXX In-line inspection system for filled containers Modular system for quality control Pgsdpfozwmkzjx Ak Hsr Depending on the equipment, inspection of fill level, closures, labels, and other quality features Automatic product tracking Connection of rejection systems for sorting out defective products Automatic height adjustment of the detection units for format changes Touchscreen/HEUFT-NaVi operating concept Manufacturer's stated performance: up to 72,000 containers/h* 2 x rejection unit/rejector HEUFT HBM100036 LI16 10.05 DELTA-FWb SPECTRUM Multi-segment rejection unit 16 segments Design: left For the automatic sorting out of detected defective containers Suitable for industrial filling, beverage, and packaging lines. The unit is new and unused; it was only unpacked for a completeness check.

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2EG050014, overall weight: 120 kg, height adjustment type: electric, Equipment: documentation/manual, HEUFT PRIME Full-product inspection / inspection system with DELTA-FWb rejection system Manufacturer: HEUFT Systemtechnik GmbH Components of an industrial HEUFT system for automatic full-product inspection and error rejection in filling or packaging lines are offered. Base unit HEUFT PRIME Full-product inspection Type/Designation: HBBPRIXXX Pjdpfxezwmg Ne Ak Hjgr In-line inspection system for filled containers Modular system for quality control Depending on the available equipment, inspection of fill level, closure, labels, and other quality characteristics Automatic product tracking Connection of rejection systems for sorting out defective products Automatic height adjustment of the detection units for format changes Touchscreen / HEUFT-NaVi operating concept Manufacturer's stated series performance: up to 72,000 containers/h* Rejection system / Rejector HEUFT HBM100036 LI16 10.05 DELTA-FWb SPECTRUM Multi-segment rejection system 16 segments Design: left / Left For the automatic sorting out of detected defective containers Suitable for industrial filling, beverage, and packaging lines. The device is new and unused; it was only unpacked for a completeness check. An inspection can be arranged at any time by prior agreement.

Condition: used, Year of construction: 2008, Cap removal machine for removing crown caps from returning empty crates. Additional title: Removal of crown caps from empty glass bottles Pgodpfx Aszwcz Aok Her Capacity filling line: 44000 bo/h capacity at the filler Power: 6 kVA Current: 16 A Voltage: 230 / 400 V Frequency: 50 Hz Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates Material: Housing from stainless steel Position: in a floor-standing cabinet on legs Features: Uncorking heads, drives; crate conveyors; cap collection trays; protective housing with doors; control cabinet with control elements

Condition: used, Year of construction: 2013, Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data - Year of manufacture: mainly 2013 - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Application: filling and packaging of non-returnable glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch - Rinser: 50 stations, single-channel, 113 mm pitch - Filler block electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Filler block compressed air: 6 bar, approx. 450 Nl/min; water: 4 bar, approx. 3.5 m³/h - Filler block weight: approx. 10,500 kg - Integrated foam cleaning; touchscreen HMI on articulated suspension arm Scope of Delivery - Depalletizer | Krones | PRESSANT UNIVERSAL 1A | sweep-off depalletizer for new glass, servo-driven four-sided centering carriage, pallet lifting unit, approx. 5,000 mm discharge table, approx. 48,000 containers/h | 2020 - Rinser-filler-capper block | KOSME | BARIFILL RFC 50-60-10 VKP | stainless steel frame, transparent protective guarding with safety interlocks, process piping, layout drawing available | 2013 - Capper | Zalkin | CA9 360 NG | 10 capping positions, approx. 22,000 bottles/h; capping heads included | 2013 - Cap control | Krones | CHECKMAT - Labelling machine | KHS | INNOKET KL2040/120-30 LM | cold glue, up to 26,000 bottles/h, camera system for label orientation, Siemens S7 control, new HMI touch panel 2019, formats incl. 0.33 L Longneck, Steinie and swing-top and 0.5 L NRW bottles | 2004 - Wrap-around packer | Krones | WRAPAPAC | 45 cartons/min, carton format e.g. 15 x 750 ml glass bottles, Nordson PROBLUE LIBERTY 14 hot-melt unit with automatic fill system | 2003 - Palletizer | GEA Procomac | OPERA | low-level infeed, automatic changeover of pallet patterns and pallet sizes, complete pallet conveying system, pallet magazine, mother pallet handling | 2009 Podpfx Aszv Tu Dek Hegr - Stretch wrapper | Robopac - Pallet labelling system | Logopack - Conveyors | KOSME | bottle transport between the machines, line divider and discharge | 2013 Condition Used. The core of the line is installed in an industrial production environment and still under power; the rinser-filler-capper block underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. The labelling machine was in production until January 2025, was overhauled in 2019 and is currently in storage. The line is composed of components from several production sites. Availability From mid-December 2026. Location: Germany.

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, overall weight: 20,000 kg, power: 50 kW (67.98 HP), Equipment: CE marking, For sale is a new, fully equipped production line for PLA and PET bottle preforms and bottle blowing. The line was manufactured in August 2025 and delivered to Lithuania. The entire factory is 100% fully equipped. The buyer can acquire a very promising and profitable business. It produces BIOBASED biodegradable bottle packaging throughout the entire cycle, from preform to finished bottle. The line includes all molding and blowing molds, as well as EU standard bottle cap molds, robots, and all necessary accessories. Both PLA biopolymers, PET, and rPET materials can be used. Line capacities: 1. Bottle preforms – 12,000,000 and more per year. 2. Bottle caps – 17,000,000 per year (28/1881 and 38/3S 1881). 3. Semi-automatic bottle blowing – 2 machines, 1,000,000 per month. Equipment: 1. Injection machine – 180 t (for preforms). 2. Injection machine – 150 t (for caps). 3. Coolers – 2 pcs. (for injection machines). 4. Full set of robots – 2 pcs. (for injection machines). 5. Injection molds – 6 pcs. (4 preform molds, 2 cap molds). All molds comply with standards (for milk, yogurt, beverages, juices, and other industries). The molds are fully equipped with hot runner systems. Podpfx Ajzv S Uvok Hsgr 16 gr / 38 3S, 20gr 38 3S, 36 gr 38 3S, 20 gr 1881 28 mm. Cap molds – 38 mm/3S and 28 mm 1881 (the cap remains on the neck). 6. Dryers – 2 pcs., 300 and 400 kg. 7. Blowing equipment – 38 mm/3S (full set). 8. Blowing equipment - 28 mm/1881 (full set). 9. Blow molds - 4 pcs. (38 mm: 250 ml, 500 ml, 1000 ml; 28 mm: 500 ml). 10. Refrigeration unit (for the blowing line). 11. Compressor (for blowing and molding). 12. Air dryer (for blowing and molding). 13. Other equipment (conveyors, mixers). All production equipment is standardized and meets all EU and manufacturer requirements. This is an excellent opportunity to start your own profitable and promising business. The asking price for the entire line is 180,000 EUR. We have a twin-screw compounder for the production of biopolymer mixtures on the line. With a serious buyer, we can coordinate the entire package, including all laboratory food contact tests and all other solutions for production.

Condition: good (used), power: 5.5 kW (7.48 HP), Item: LC-5833 - Centrifugal pump - LKH-20/155SSS Pgsdpfx Akozv R Iuo Her Alfa Laval - Centrifugal Pump LKM Type: LKH-20/155 SSS, 5.5 kW

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 8,000 bph at 1,5 l  - Formats: - 0,5 l and 1,5 l bottles - Filling product: - Water and carbonated soft drinks - Closure system: - Plastic screw caps - Sport caps - Packing: - Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles - Pallet type: Pgedpozvuwyefx Ak Hsr - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) Scope of Delivery  - Blow moulder: SIPA, year 2002 - Compressed air generator: Kaeser, year 2002 - Rinser/filler/capper: Procomac, year 2000 - Number of rinsing nozzles: 24 - Number of filling valves: 24 - Number of capping heads: 6 - Labeller: Futura, year 2000 - For the labelling of opp labels with hot melt - Inspection device: Logics & Controls, year 2000 - For the control of fill height, capping and label - Shrink packing machine: Krones TFS Variopack, year 2001 - Handle applicator: Twinpack, year 2001 - Tray labeller: Logopack, year 2001 - Pallet stretcher: Born, year 2001 - Palletizing unit: Levanti / Profipack - CIP-unit: Corosys, year 2012 - CO2-degassing unit: Corosys, year 2012

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg Pjdpfszvqi Sjx Ak Hogr - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: used, Year of construction: 2009, operating hours: 19,648 h, machine/vehicle number: LC666, Used Tetra Pak A3 CF 100V 250 prisma filling line - Year 2009Technical Specifications & Performance DataThis complete carton bottling line is configured for the 250 Prisma format and combines filling, accumulation, straw application and cardboard packing functions in a coordinated industrial packaging process. The line includes equipment manufactured between 2009 and 2012, with the principal filling machine identified as model A3 CF.Filling machine: A3 CF, manufactured in 2009, 100VAccumulator: ACHX30, manufactured in 2010Straw applicator: SA30, manufactured in 2012Cardboard packer: CBP32, manufactured in 2010, 400VProduction format: 250 PrismaIncluded handling equipment: 1 paper trolley set and 2 paper reelsThe configuration is designed around carton handling and secondary packaging rather than bottle processing, making it suitable for industrial packaging applications using Prisma-style carton formats.Advanced Automation & Control SystemsThe line is composed of dedicated processing and packing modules that support a sequential production workflow. The filling machine is specified at 100V, while the cardboard packer is specified at 400V. The accumulator provides a buffer between operations, helping to maintain material flow when downstream equipment requires short interruptions or adjustment time.The straw applicator performs a dedicated packaging operation after filling, supporting a practical carton presentation for end users. Electrical connection and control-system integration should be evaluated during installation to ensure correct synchronization between the individual modules.Production Line Integration CapabilitiesThis used bottling line is arranged as a carton filling and industrial packaging system for the 250 Prisma format. The equipment sequence supports filling, straw application, product accumulation and cardboard packing. The included paper trolley is intended for handling paper reels associated with carton production operations.Machine typeModelYearFilling MachineA3 CF2009Various Equipment - Accumulation SystemACHX302010Various Equipment - Straw ApplicatorSA302012Case PackerCBP322010Various Equipment - Paper Reel TrolleyThe modular layout allows the line to be assessed for integration with upstream product p... Podpfszvl Uisx Ak Hsgr

Condition: used, machine/vehicle number: PST37, Used pasteurizer for tomato juice 400 CPMTechnical Specifications & Performance DataThis BOND four-module tunnel pasteurizer-cooler is designed for the thermal treatment and controlled cooling of tomato juice containers. Built primarily in stainless steel, the machine combines pasteurization and cooling stages on a continuous Intralox plastic mesh conveyor, providing a robust solution for industrial packaging and beverage production applications requiring extended thermal processing.Maximum production speed: For tomato juice 400 containers per minute (24.000 unit per hour) for beer 600 container per minut (36.000 unit per hour).Alternative operating condition: 300 containers per minute ( overhauled, in excellent condition )Thermal length: 27,400 mmUsable width: 3,200 mmUseful processing area: 80 m²Total internal capacity: 22,000 piecesProduct weight used for the thermal calculation: 450 gContainer format indicated: 2.0LAdvanced Automation & Control SystemsThe pasteurizer is supplied with an electrical control panel for management of the thermal treatment and conveyor process. Water tanks, recirculation pumps, heat-exchange equipment and the continuous conveyor are integrated into a coordinated operating system. The design includes recirculating-water circuits serving the pasteurization and cooling sections.Thermal performance data indicate pasteurization water at 95°C, with a cooling-tower temperature difference of 10°C. The documented recirculating-water volume is 80 m³/h, with additional pump references of 65 m³/h and 165 m³/h.Production Line Integration CapabilitiesThis tunnel pasteurizer is suitable for installation in a used bottling line or industrial packaging line where filled containers require pasteurization before downstream handling, labeling or secondary packaging. Its continuous mesh conveyor configuration supports inline product flow between upstream filling equipment and downstream cooling, inspection or packaging machinery.The machine was originally engineered for tomato juice, a product requiring longer pasteurization times and higher pasteurization temperatures than beer. The system can therefore be evaluated for beverage production and food-processing applications with comparable thermal-treatment requirements. The cooling section includes a 20 m² buffer conveyor to support controlled product discharge and line balancing.Machine Condition & Maintenance HistoryPresented as like new and fully operational, the machine is complete with the accessories required for operation. The all-stainless-steel construction supports durability and hygiene in demanding production environments, while the Intralox mesh belt provides continuous container transport through the thermal and cooling zones.Operational Performance & VersatilityAt 400 containers per minute, the maximum documented thermal cycle lasts 55 minutes. Pasteurization represents 25% of the cycle, with 14 minutes at 95°C water temperature, followed by 41 minutes of cooling using cooling-tower water. At 300 containers per minute, a revised 60-minute cycle is indic... Pgjdpfxezvl S Is Ak Hsr

Condition: used, Year of construction: 2013, Overview This KHS Innopro KZE 72 is a flash pasteurizer (short-time heating system) for beer, cider and other carbonated beverages, built in 2013 by KHS GmbH (Dortmund, Germany). Working with a plate heat exchanger, it gently pasteurizes at a nominal capacity of 72 hl/h and is designed for a product flow between 24 and 72 hl/h with a maximum CO₂ content of 6.5 g/l. The system comes complete with its 50.8 hl buffer tank and the control cabinet with touchscreen HMI. The unit comes out of a large brewery, is still installed and can be visited on request. Pedozvfbcopfx Ak Hegr Technical data - Manufacturer: KHS GmbH (Dortmund, Germany) - Model: Innopro KZE 72/T4-72-12/PT45A - Year of manufacture: 2013 - Machine type: flash pasteurizer with plate heat exchanger - Nominal capacity: 72 hl/h - Minimum adjustable capacity: 24 hl/h - Capacity during CIP cleaning: 85 hl/h - Maximum CO₂ content in the product: 6.5 g/l - Pasteurization temperature: 72 °C (beer) / 85 °C (cider) - Holding time: 30 s - Product inlet temperature: 4 °C; product outlet temperature: max. 4 °C - Supply pressures: product 3.5 bar(g), steam 3 - 6 bar(g), coolant 1.5 - 2 bar(g), CIP 4 bar(g) - Electrical connection: 400 V, 50 Hz, 3-phase - Dimensions pasteurizer skid: approx. 4,600 x 3,500 x H 2,900 mm - Weight pasteurizer skid: approx. 3,100 kg (frame incl. plate heat exchanger) Equipment - Pasteurizer skid with plate heat exchanger type PT45A, pumps and valve manifold - Buffer tank: 50.8 hl gross / 45.5 hl working volume, inner Ø 1,600 mm, H 3,420 mm, approx. 1,120 kg, operating pressure up to 5 bar(g), CO₂ and sterile air connections 6 - 8 bar(g) - Control cabinet with touchscreen HMI - OEM technical documentation (operating manual) Condition Used - good working condition. The system was in production in a large brewery until recently, is still installed and can be inspected. Availability Immediately. Location: Netherlands. Dismantling and loading by arrangement.

Condition: used, Year of construction: 2003, Overview This high-pressure air compressor was manufactured in 2003 by the Belgian company Ateliers François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and electrically connected in Germany and is available immediately. Technical data - Free air delivery: 2,100 m³/h (35 m³/min) - Operating pressure: 40 bar - Design pressure (PS): 42 bar - Speed: 480 rpm - Shaft absorbed power: 355 kW - Voltage: 400 V - Year of manufacture: 2003 - Application: PET bottle blowing Scope of delivery - 1 × High-pressure compressor 40 bar CE68 ASG - 1 × Refrigeration dryer - 1 × Electrical control cabinet Pgjdpjzvc Nwsfx Ak Hsr Condition - Still installed and electrically connected - Available for inspection on site Availability Immediately available.

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: - Bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 - Swing top sealer Manufacturer: Rico - Labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 - Laser printer for dating Manufacturer: Domino - Bottle collecting table Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Psdpfxszu Rw Te Ak Hsgr Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Features: Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine; Domino laser printer for dating; bottle collection table

Condition: good (used), Year of construction: 2006, production capacity: 18 unit/h, For sale: KHS mixer, capacity 18 m³/h, manufactured in 2006, model KHS INNOPRO CMX-18. Attached are photos of the mixer and its nameplate, as well as a schematic diagram of the pumps and valves. The machine will be available starting in October 2026. It is in good technical condition and currently operates without any problems. Podpfx Ajzu Ni Ijk Hsgr Net price (ex-works Gorzanów): 60,000 EUR.

Condition: used, Year of construction: 2009, Overview This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour. The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SIPA (Italy) - Model: SFR 8 - Year of manufacture: 2009 - Machine type: rotary stretch-blow moulder for PET bottles - Number of cavities: 8 - Output: up to 12,400 bottles/hour - Bottle formats: 0.5 l, 0.75 l and 1.5 l - Neck finish: 28 mm / 1881 (short neck) - Electrical connection: 400 V, three-phase - Total connected load: 147 kW - Location: Germany Included in the sale - Four sets of blow moulds with eight cavities each: two sets for 1.5 l, one for 0.75 l and one for 0.5 l - Preform feeding system - Chiller - Machine-mounted touchscreen control panel - Full safety enclosure with viewing windows Not included - Preform hopper (can be custom-made) - High-pressure compressor Condition Pgodpfx Akszu Icyj Hsr The machine is in very good condition and has been maintained regularly by the manufacturer. It is still installed and under power and remains in regular production, so it can be inspected in operation on site. Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 10 and 14 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: used, Year of construction: 1994, Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machine's controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12" touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Technical data - Manufacturer: Ortmann + Herbst - Model: Hansa B 100/20 - Year of manufacture: 1994, completely refurbished 2013 - Machine type: rotary filler with screw capper, glass bottles - Filling valves: 100 - Capping heads: 20, for aluminium screw caps - Pitch: 115 mm - Capacity: up to 30,000 bph with 750 ml glass bottles - Control: Siemens S7 with SIMATIC MP377 12" touch panel (2013) - Change parts: two sets, for 250 ml and 750 ml bottles Equipment - New electrical system with Siemens S7 control and touch panel (2013) - New main bearing (2013) - New safety housing around the machine (2013) - Cap sorter with feed chute for aluminium screw caps - Two change part sets: 250 ml and 750 ml bottles Condition Used - refurbished. Built in 1994 and completely refurbished in 2013, including the electrical system, the main bearing and the safety guarding. Still installed and under power; the machine can be visited and inspected on site. Availability Pgodpfxjzu Iaxj Ak Hjr From 2 November 2026. Location: Germany. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited on request.