TGS nástroje-stroje-technologické služby, spol. s r.o.

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) Dlodpfx Abjx Eh Iqo Tja 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: like new (used), Year of construction: 2012, operating hours: 5,607 h, functionality: fully functional, 2012 LEADWELL MCV 1500i+ (4 Axis) VMC Category: Vertical Machining Centers (VMC) Reference No.: 400140 Capacity: 1520 X 1016 X 720 MM Year of Construction: 2012 Technical Specification: SPINDLE Spindle Taper : CAT/BT 50 Spindle Speeds : 4000 RPM WORKING CAPACITY Table Size : 1550 x 1000 mm Travels (XYZ) : 1520 x 1016 x 720 mm Spindle Nose to Table (Min.- Max.) : 120 - 840 mm Dodpjx Ehibsfx Ab Tola ATC Tool Change Capacity : 24 Tools ATC Type : ARM CNC Control : Fanuc Oi-MD Additional Details: 12" 4th Axis

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand HEIDENHAIN Model ITNC 640 Main Drive Spindle speed range 10000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 1600 mm Y-Axis Movement 810 mm Z-Axis Movement 700 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Accessories: Chip conveyor This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information. Application Types Milling Dedpfox Efb Iox Ab Tola

Condition: used, Year of construction: 2017, operating hours: 7,150 h, functionality: fully functional, GENERAL SPECIFICATION 1.1. AXES SYSTEM - Travel : o X axis: 1300 mm o Y axis : 670 mm o Z axis : 625 mm - Spindle to table surface : 150~775 mm - Motor power : o X axis : 3.0 kW o Y axis : 3.0 kW o Z axis : 3.0 Kw 1.2. CAPACITY - Table size : 1500 x 670 mm Dedpfsx Ecybex Ab Tola - Table surface : T-slot 5–125 x 18H8 mm - Max. workpiece weight : 1300 kg - Max. workpiece height : 700 mm 1.3. SPINDLE HEAD - Motor power (Cont./30min.) : 15/18.5 kW - Max. spindle speed : 12.000 rpm (optional) - Max. torque (short term) : 117.8 N·m - Taper type : ISO # 40, 7/24 Taper 1.4. TOOL MAGAZINE - Tool storage capacity : 30 scule - Tool shank : MAS403 BT40 - Pull stud : PS806 (NIKKEN) - Maximum tool diameter : o Continuous : Ø80 mm o Adjacent pots empty: Ø125 mm - Max. tool lenght : 300 mm - Max. tool weight : 8 kg - Tool change time (Tool-to-tool) : 1,2 sec - Tool change time (Chip-to-chip) : 3,4 sec 1.5. RAPID TRAVERSE - Rapid traverse: o X, Y axis : 36 m/min o Z axis : 30 m/min - Max. Cutting feedrate :15.000 mm/min - Ballscrew (Diameter x Lead) : o X, Y axis : 40 x 12 mm o Z axis : 40 x 10 mm 1.6. ACCURACY - Positioning : ±0.005 mm - Repeatability : ± 0.002 mm 1.7. LUBRICATION UNIT - Tank capacity : 0,7l 1.8. COOLANT SYSTEM - Tank capacity : 325 l - Pump motor power : 0,4 kW - Max. flowrate: 40 l/min 1.9. DIMMENSION AND WEIGHT - Dimmensions (LxlxH) : 2597 x 3350 x 3120 mm - Weight : 8.500 kg 1.10. OTHER CHARACTERISTICS - Electrical power supply : 3Ph-AC220V/60Hz x 33,5kVA - Air power supply : 0,54 MPa x 250 Nl/min - CNC Control : Fanuc i-Series 1.11. Accessories: • TSC 20 bar • 12.000 rpm • Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 5500 mm Measurements depth 4400 mm Measurements height 2900 mm Control Unit Brand SIEMENS Model 810T Main Drive Dsdpfjx D Hk Ijx Ab Tjla Number of axis 3 Movement X-Axis Movement 1250 mm This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Application Types Milling

Condition: ready for operation (used), Year of construction: 1987, General Data Machine weight 9000 kg Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 560 mm Dledpex D Hl Sjfx Ab Toa Z-Axis Movement 630 mm Table Table load 2500 kg This 4-axis HELLER PFU2 was manufactured in 1987. A vertical machining centre, it offers robust capabilities for diverse machining tasks. Ideal for those seeking to enhance their machining operations with a reliable, used machine. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 9500 kg Main Drive Number of axis 3 Spindle Speed 20000 RPM Movement X-Axis Movement 1450 mm Z-Axis Movement 300 mm Y-Axis Movement 520 mm This 5-axis C.B. Ferrari A186 vertical machining center was manufactured in 2010. It features a table size of 525 × 2320 mm, X-axis travel of 1450 mm, and a maximum power of 40 kW. The machine includes a high-speed electrospindle capable of 20,000 rpm, ensuring efficient machining. If you are looking to get high-quality milling capabilities, consider the C.B. Ferrari A186 machine we have for sale. Contact us for more information about this machine. Dlodex D Hp Dspfx Ab Tsa Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,662 h, Control Unit Brand HEIDENHAIN Model ITNC 530 Main Drive Number of axis 5 Spindle Speed 18000 RPM Movement X-Axis Movement 1500 mm Z-Axis Movement 800 mm Y-Axis Movement 1500 mm Dsdpfxjx D Drie Ab Tjla This 5-axis LGB KX45S FIVE 2 was manufactured in 2012, featuring a moving table of 1480 x 1440 mm and a high-speed spindle at 18,000 rpm. It includes a HEIDENHAIN ITNC 530 control, HSK 63A tool holder, and a 40-position tool changer. Ideal for precise, complex machining tasks. If you are looking to get high-quality milling capabilities consider the LGB KX45S FIVE 2 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, Main Drive Number of axis 3 Spindle Speed 2000 RPM Dedpfx Abex D H Ndo Tela Spindle motor power 22.4 kW Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Table Table load 794 kg This 4-axis HAAS VF-4SS vertical machining center was manufactured in 2019. It features a 1270 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. With a maximum spindle speed of 12,000 rpm and spindle power of 22.4 kW, it ensures robust performance. Maximum table load capacity is 794 kg. If you are looking to get high-quality milling capabilities consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, Main Drive Number of axis 3 Spindle Speed 7500 RPM Spindle motor power 15 kW Tool taper BT 40 Movement X-Axis Movement 1626 mm Z-Axis Movement 762 mm Y-Axis Movement 1016 mm Djdpfx Ajx D H Rueb Tjla This 3-axis HAAS VF-8 vertical machining center was manufactured in 2003. It features a 1626 x 1016 x 762 mm travel range, a 15.4 kW spindle power, and a maximum spindle speed of 7500 rpm. Equipped with a BT-40 tool holder, a 24+1 position tool changer, and a screw-type chip conveyor. If you are looking to get high-quality milling capabilities consider the HAAS VF-8 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, General Data Measurements width 3500 Measurements depth 6500 mm Machine weight 9000 kg Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Number of axis 4 Movement X-Axis Rapid Traverse 28000 mm/min Y-Axis Rapid Traverse 28000 mm/min Z-Axis Rapid Traverse 28000 mm/min X-Axis Movement 1600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Table Table load 150 kg Tools Slots in storage 44 Max weight 5 kg Max tool diameter 70 mm Max tool length 240 mm Type of tool holder DIN 69871-SK40 Media Chip conveyor Yes Dsdpfxjx D H Sxj Ab Tola Additional Equipment Measuring Probe RWP20.00 Enclosed Work Area Enclosure according to UW Some SK40 Chucks Hydraulic/Pneumatic Clamping Option in the Machining Area Römheld 8400-185 Hydraulic Unit, Max. Pressure 500 bar Flushing Gun in the Machining Area Replacement Milling Spindle Available This 4-axis Unisign Univers 4 was manufactured in 2004, featuring X-travel of 1600mm, Y-travel and Z-travel of 400mm each, and a spindle speed up to 9000 rpm. It includes a chain tool magazine with 44 positions and a tool holder type DIN 69871-SK40. The machine weighs 9000 kg and requires a space of 6.5 x 3.5m. If you are looking to get high-quality milling capabilities consider the Unisign Univers 4 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 2720 mm Measurements depth 4345 mm Measurements height 2815 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 12000 rpm Spindle motor power 18.5 kW Tool taper SK40 Number of axis 3 Movement X-Axis Movement 1270 mm X-Axis Rapid Traverse 36 m/minute Y-Axis Movement 670 mm Y-Axis Rapid Traverse 36 m/minute Z-Axis Movement 625 mm Z-Axis Rapid Traverse 30 m/minute Djdox D Ii Sepfx Ab Tjla Workpiece Workpiece weight 1000 kg Additional Equipment RENISHAW tool and workpiece probe Internal cooling through the spindle: 12 Bar External spindle cooling with air and cutting fluid Belt chip conveyor Rinsing gun Coolant tank: 380 l Preparation for the 4th person External memory: 1 GB Block reading for 3D machining Handwheel This 3-axis DOOSAN DNM 650 II vertical machining center was manufactured in 2015. It features a Siemens 828D control, a spacious 1300 x 670mm table, and a robust 18.5 kW spindle motor achieving speeds up to 12000rpm. The machine includes a 30-position tool changer and SK40 tool taper, enhanced by a RENISHAW probe and internal cooling capabilities. If you are looking to get high-quality milling capabilities consider the DOOSAN DNM 650 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Dlodpjx D Irmefx Ab Tja This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 3844 mm Measurements depth 5055 mm Measurements height 3240 mm Machine weight 8880 kg Movement X-Axis Movement 1270 Y-Axis Movement 660 Dsdpfx Abjx D E Eqs Tsla Z-Axis Movement 610 This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, General Data Measurements width 3921 mm Measurements depth 5059 mm Measurements height 3240 mm Machine weight 7950 kg Control Unit Brand HURCO Model WINMAX Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 1270 mm X-Axis Rapid Traverse 32 Y-Axis Movement 660 mm Y-Axis Rapid Traverse 32 Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 Table Number of tslots 6 Table load 2000 kg Tools Max weight 7 kg Max tool diameter 80/75 mm Max tool length 300 mm Dsdpfxex D E Aco Ab Tela This 3-axis Hurco VMX50i was manufactured in 2021. It features a robust SK40 spindle, capable of reaching speeds up to 12,000 rpm, and a large table surface of 1500 x 660 mm supporting up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, it's ideal for dynamic machining tasks. Includes a 30/40 position automatic tool changer. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand MITSUBISHI Model M70A Main Drive Number of axis 3 Movement X-Axis Movement 1600 mm Z-Axis Movement 700 mm Y-Axis Movement 800 mm This 3-axis KAMIOKA VMC1600 was manufactured in 2012, featuring a Mitsubishi M70A CNC control. It offers extensive axis travels with X-axis at 1600 mm, Y-axis at 800 mm, and Z-axis at 700 mm. The design includes inverted guides for enhanced precision. If you are looking to get high-quality milling capabilities consider the KAMIOKA VMC1600 machine we have for sale. Contact us for more information. Application Types Dljdpfjx D Dtmsx Ab Tja Milling

Condition: ready for operation (used), Year of construction: 2018, Table Table Width 1200 mm Main Drive Number of axis 3 Spindle Speed 10000 RPM Dsdpfox D Dvhjx Ab Tjla Spindle motor power 15 kW Movement X-Axis Movement 1270 mm Z-Axis Movement 630 mm Y-Axis Movement 650 mm Tools Max weight 7 kg This 3-axis Hartford HCMC 1270 was manufactured in 2018. It features a table size of 1,370 × 650 mm, capable of handling a maximum load of 1,200 kg. With X, Y, and Z travels of 1,270 mm, 650 mm, and 630 mm respectively, it offers extensive machining capabilities. The spindle reaches up to 10,000 rpm, powered by a 15 kW motor. Includes a 30-position tool magazine. Consider the opportunity to buy this Hartford HCMC 1270 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model TNC 620 Table Table load 1500 kg Main Drive Dledpfxsx D Dzdj Ab Tea Number of axis 4 Spindle Speed 15000 RPM Tool taper SK 40 Movement X-Axis Movement 1200 mm Z-Axis Movement 500 mm Y-Axis Movement 610 mm Tools Slots in storage 32 This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, Control Unit Model ITNC 530 Brand HEIDENHAIN Main Drive Spindle speed range 18000 Tool taper HSK 63A Movement X-Axis Movement 1500 mm Y-Axis Movement 1500 mm Z-Axis Movement 800 mm Tools Slots in storage 40 Media Chip conveyor Yes Additional Equipment Electronic handwheel HR 420 Renishaw tool filler Dlsdpfjx D D Idjx Ab Tea Cooling unit MFE 28 filter unit Laser tool measuring system This 5-axis LGB KX45 SQUARE FIVE 2 vertical machining centre was manufactured in 2012. It features a moving table of 1480 x 1440 mm, a Heidenhain ITNC 530 control, and a high-speed capability of 18,000 rpm with HSK 63A. Additional highlights include a chip conveyor, a Renishaw tool filler, 40 tool places, and an IKZ 40 bar with a cooling unit. For more information about this vertical machining centre, please reach out to us. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,915 h, Movement X-Axis Movement 1200 mm Dledex D D T Tepfx Ab Tja Y-Axis Movement 730 mm Z-Axis Movement 650 mm This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model Sinumerik Dsdpex D Elwjfx Ab Tola Movement X-Axis Movement 1400 mm Z-Axis Movement 600 mm Y-Axis Movement 700 mm This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,452 h, Main Drive Spindle speed range 12000 Number of axis 3 Dledpfex D Embox Ab Toa Movement X-Axis Movement 1270 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm This 4-axis HAAS VF-4 vertical machining center was manufactured in 2017. It features a spindle speed of 12.000 RPM, a 22.4 kW spindle motor, and a table size of 1321mm x 495mm. It includes a 20-position tool changer, through-spindle coolant at 21 bar, WIPS-R probes, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,361 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Spindle speed range 8000 Spindle motor power 28 kW Number of axis 3 Movement X-Axis Movement 1270 mm Y-Axis Movement 610 mm Z-Axis Movement 720 mm Table Table load 1200 kg Tools Max weight 15 kg Dlsdpfx Abjx D Epio Tea Additional Equipment 4 hydraulic vices from Röhm and various SK50 tool holders This 3-axis MAS MCV 1270 Power was manufactured in 2018. It features a Heidenhain TNC 530 control, SK50 spindle holder, and a tool magazine with 24 places. The machine offers a table size of 1500mm x 670mm, supporting a maximum load of 1200kg. Rapid traverse reaches up to 40m/min, with a maximum spindle speed of 8000 rpm. If you are looking to get high-quality milling capabilities consider the MAS MCV 1270 Power machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 15000 Spindle motor power 16 kW Tool taper HSK 63 Number of axis 4 Movement X-Axis Movement 1300 mm Y-Axis Movement 600 mm Z-Axis Movement 800 mm Table Table load 400 kg Tools Number of index 36 Type of tool holder SK40/DIN 69871 or HSK 63-A Media Chip conveyor Yes This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Dljdpex D Ix Tjfx Ab Tja Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand HAAS Model na Main Drive Tool taper BT40 Number of axis 4 Dedpfox D Sw Hex Ab Tsla Movement X-Axis Movement 1250 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm This 4-axis HAAS VF-4SS was manufactured in 2018, featuring a working area of 1250 × 508 × 635 mm and a spindle speed of 12,000 rpm. It includes a 24 + 1 tool magazine and a BT40 taper. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Application Types Milling