Bider Hauser AG

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: F4N K5 105, Emco FB5; year of manufacture 1997; accessories: sub-spindle head + approx. 10 pcs SK 40 tool holders; Prototrac control Pedpfsxqf Ewox Agwjgu

Condition: used, For sale: the tool milling machine shown in the photos, manufactured by the German company Deckel, model FP3A. The machine offers manual, semi-automatic, and automatic operation modes. Controlled via G-codes. Control type: CNC 2102 Deckel. Psdpexluu Rofx Agwogu

Condition: used, Year of construction: 1984, x-travel 410 mm y-travel 310 mm z-travel 400 mm table-size 700 x 280 mm control Heidenhain TNC 145 tool adaptor SK40 turning speed range 40- 2.000 U/min rapid speed 1,5 m/min feed speeds 1500 mm/min power requirement 2.2 kW quill stroke 63 mm weight 1,3 t total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve Podpfx Asxlufpegwjgu - Documentation

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2803-2693, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 32 rpm, quill stroke: 80 mm, quill travel distance: 80 mm, type of input current: three-phase, Equipment: documentation/manual, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with a Dialog 4 CNC control system. The machine is German-made, renowned for its quality, and is suitable for tool and mould making as well as precise single-part and small-batch production. Technical Data (extract) Model: FP3NC Control: Deckel Dialog 4 Year: 1985 Serial Number: 12767 Main spindle power: 2.0 / 3.0 kW, pole-changeable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill Stroke (manual): 80 / 80 mm (horizontal/vertical) Travel paths: X-axis: 400 mm Podexlghpopfx Agwogu Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Clamping slots in table: 4 slots, 14H7, 63 mm spacing Total weight: approx. 1800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Equipment & Control - 4-axis contouring operation with dialog-guided input - 3D linear and circular interpolation, helical interpolation, polar coordinates - Extensive drilling and milling cycles, graphical cycle entry support - “Contour pocket” milling cycle for pocket machining (including irregular shapes and islands) - Subroutine functions, program memory up to 512 kByte - Tool offsets for up to 100 tools - Interfaces for cassette recorder, punch tape reader, floppy disk or Winchester drive (DNC-capable) Condition & Features - Machine is fully functional - High-precision, stable design – ideal for workshops, training or production - Operating manual and technical documentation available - Inspection by appointment possible

Condition: ready for operation (used), Emco emcomat FB4 Milling Machine CNC control over X and Y axes by Proto Trak Type AGE 2 Also usable in conventional mode. SK40 spindle taper Pgsdpfsxc H I Rsx Agweu Spindle speeds: 50-2500 rpm X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Equipped with coolant system, emergency stop, and table guard with interlock.

Condition: ready for operation (used), Year of construction: 2013, Emco emcomat FB-600 CNC milling machine in Nieuwstraat! Pgedpfx Ajxc H H Hogwsu

Condition: used, Year of construction: 2008, x-travel 400 mm y-travel 300 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 40 - 2.000 U/min table-size 750 x 320 mm feeds -stepless- 10 - 380 mm/min rapid traverse 1.200 mm/min power capacity 2,2 kW quill stroke 80 mm voltage 400 V total power requirement 4,7 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,15 x 1,40 x 1,85 m Pjdpfexa Hf Rjx Agwegu - Serial-No.: 148373 - 3-axis digital display - Horizontal milling device - Milling head swivels ±45° - Coolant device

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, warranty duration: 24 months, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Immediately available stock machine from our Trencin (SK) showroom. (Sale reserved.) EMCOMAT FB 450 with Siemens Sinumerik 828D control system. DEMO machine in “AS NEW” condition, available for immediate delivery. (Sale reserved.) We are happy to provide you with an individual offer. Visit us and inspect the machine under power. Travel range: X450/Y350/Z400 mm Table size: 800 x 400 mm Drive power: 7/10 kW Infinitely variable spindle speed: 10–5000 rpm SIEMENS Sinumerik 828D Universal toolroom milling and drilling machine equipped with the modern Sinumerik 828D control system and hydraulic tool clamping. Travel range: X450/Y350/Z400 mm Drive power: 7/10 kW Spindle speed: 10–5000 rpm Feed rate: 10–2000 mm/min Psdpfxjxapdce Agwegu Rapid traverse up to 5000 mm/min Toolroom machine precision according to DIN 8615 Tool holder: DIN 69871 SK40 Includes: - Linear guides - Ball screws - Vertical milling head swivel ±90° with quill stroke 80 mm - Swivelling unit for vertical head - Hydraulic tool clamping - Coolant system - LED machine lighting - Fixed angle table 800x400 mm - Chip tray - Automatic central lubrication - Service tools - Documentation in Czech and English - Sinumerik 828D interface in Czech, German, English - 15" multi-touch display - Includes 3-axis control package with ball screws and servomotors - Machining cycles with graphic support: - Drilling, deep drilling, reaming - Tapping (with length compensation), on pitch circle and in a line of holes - Rectangular and circular pockets - Slot milling cycle - Measurement cycle - etc. - USB interface

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Pjdpfx Aoxab T Aegwjgu Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E

Condition: good (used), Maho MH500W2 Pgedpfxow Id Igs Agweu Control: Heidenhain TNC232B Year of manufacture: approx. 1988 Spindle mount: ISO40 Spindle speed: 20-4000 rpm Feed rate: 1-3000 mm/min Table size: 700x350 mm Coolant system Documentation Travel paths: X: 500 mm Y: 380 mm Z: 350 mm Weight: approx. 1800 kg The machine was powered up until recently and is in good, fully functional condition.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2010, Excellent Condition with Tooling, CE-Compliant!! Technical Data: >> Year of manufacture: 2010 Podpfsw Id Dzox Agwegu >> Fixed angular table >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed on 3 axes from 0 to 2000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Rapid traverse (X/Y/Z): 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Weight approx. 1700 kg >> Floor space required: approx. 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control system >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system >> Tool holders, hydraulic vise, clamping tools About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in very good original condition. It comes from a facility where it was only used occasionally for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the swiveling vertical head. All guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility.

Condition: good (used), Year of construction: 2003, Internal item no.: 25045 Universal Milling Machine Emco FB4 Year: 2003 + Accessories (Hydraulic machine vice Allmatic 110 / 12x SK40 holders in rack) + Electrically tested until 11/2028 (as per inspection sticker) + 3-axis digital readout Heidenhain ND780 Travel: X 450 / Y 300 / Z 350mm Quill stroke: 100mm Main drive: 3.2kW Pgjdew Hrycjpfx Agwju Speed range: 63 - 3150 rpm Milling table: 800x400mm Automatic central lubrication Dimensions (LxWxH): 200 x 200 x 200cm Weight: 2100kg

Condition: good (used), Year of construction: 1986, Milling machine Deckel FP3NC Manufacturer: Deckel Type: FP3NC Year of manufacture: 1986 Control: Dialog 4 Condition: used Travel paths: X 400 / Y 400 / Z 400 mm Quill stroke: 80 mm Speed: 40 rpm. Up to 3600 rpm. Pivoting milling head. Hydraulic tool holder vertical/horizontal SK40 Electronic handwheel. Control bar. For changing tools and starting programs. Pjdpow Ein Uofx Agwsgu Documentation. Lamp. Coolant system. Full cabin. NC T400 rotary table Weight: approx. 2000 kg. Control cabinet weight: 300 kg

Condition: as good as new (ex-display), Year of construction: 2019, Machine is in the exhibition and was only used for demonstration purposes. Sale of last Optimill F 120X CNC milling machine directly from the manufacturer. F 120X - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design High productivity Linear guides for high rapid traverse speeds in all axes 21-fold magazine tool changer High reliability Cast body made of quality Mehanite casting Cross table precision ground with 3 T-slots Heavily ribbed, torsion-free machine base Precision-ground, preloaded high-performance ball screws ball screws in all axes High-torque servo drives directly on the ball screws in all 3 axes Electronic handwheel Chip conveyor Cleaning gun RJ45 plug connection, USB connection and power connection (230V) Coolant unit with 210 liter coolant tank Heat exchanger Options included: PPU 290 touch panel 16000rpm inline spindle with oil cooler Belt conveyor with chip cart Machine leasing possible via Siemens Finance. Liquidity prerequisite. Dimensions and weights Length approx. 2315 mm Width/depth approx. 2194 mm Height approx. 2325 mm Weight approx. 3800 kg Drilling/milling capacity Cutter head size max. 80 mm Feed/rapid traverse speed X-axis 40000 mm/min Y-axis 40000 mm/min Z-axis 40000 mm/min Electrical data Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Electrical connection Total connected load 45 kVA Distance vertical spindle - milling table min. 150 mm Distance vertical spindle - milling table max. 450 mm T-slots size 14 mm Number of T-slots 3 T-slot spacing 125 mm Pgjdpfx Agow Ea Rmowsu Max. load 250 kg Accuracy Repeat accuracy ± 0.006 mm Positioning accuracy ± 0.005 mm Cooling lubricant system Coolant pumps Coolant pump(s) Drive power 370W each Tank capacity 120 l Control system Type Sinumerik 828D PPU 290 System software SW 28x CNC memory 8 MB Block change time 2 ms Look Ahead 150 Number of tools 512 Travel distance X-axis automatic 500 mm Y-axis automatic 400 mm Z-axis automatic 300 mm Vertical spindle Spindle holder BT 30 Speed range 10 - 16000 min¯¹ Power drive motor continuous operation S1 12 kW Power drive motor S6-30 % operation 22.8 kW Torque drive motor continuous operation S1 38 Nm Torque drive motor 30% operation S6 116 Nm Feed motor torque X-axis continuous operation S1 6 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 11 Nm Servo tool changer Carousel type in front of the spindle Number of tool positions 21 tools

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Pgsdpfjw D D Sfox Agwju Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, H E R M L E CNC-controlled universal tool milling machine – Open type!!! Model UWF 600 CNC (HDH TNC 425) Year of manufacture: 1994 New LCD monitor – €3,500!! Only 1 year old. We have machined workpieces over 3 meters long on this machine. X-axis travel: 400 mm y-axis travel: 330 mm z-axis travel: 350 mm Total power requirement: 6.3 kW Machine weight: approx. 2 t Table travels: longitudinal (X) 400 mm Vertical (Z): 350 mm Transversal (Y) of milling slide: 330 mm Table size: 630 x 335 mm Spindle taper: SK 40 Spindle speeds in 3 steps, vertical / horizontal: 40 – 6,000 rpm Vertical quill stroke: 63 mm Feeds, infinitely variable: 1 – 2,000 mm/min Feed force: 4,800 N Rapid traverse: 5,000 mm/min Spindle drive: 3.5 kW Total power: 6.3 kW – 380 V – 50 Hz Weight: 2,000 kg Accessories / Special equipment: • HEIDENHAIN 3-axis path control system Type TNC 425 with graphic display and various subprograms, mobile electronic handwheel Podpjw Anbusfx Agwegu • Hydraulic vice with 2-ton clamping force • Vertical head can be easily swivelled away for using the horizontal spindle • Hydraulic tool clamping in the V-spindle, Separate tool trolley with 14 different arbor holders, Many milling cutters, many still in original packaging • Separate free-standing control cabinet, separate coolant system • Central lubrication, ammeter, etc. Ideal machine for toolmaking and electrode production. Condition: good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal Tool Milling Machine Emco Emcomat FB-450 Linear with Position Indicator – Near-Mint Condition, CE-Compliant!! Technical Data: >> Year of manufacture: 2013 | Machine No.: F9A124962 >> Milling table clamping surface: 800 x 400 mm T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 150 kg >> Infinitely variable spindle speeds: 10–5000 rpm Pedpfxewycv Io Agwogu >> Infinitely variable feed rates: 10–5000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 10 kW >> Spindle brake >> Technical documentation, spare parts plans, operating manual included >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head >> Rotary table >> Machine vice >> Steady rest About the Machine: For sale is a Universal Tool Milling Machine Emco Emcomat FB-450 Linear with position display, in near-mint condition. The machine comes from a government operation and was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal operation. Conversion from vertical to horizontal mode is very simple due to the tilting vertical head. The Emco has been mechanically and electrically tested in our workshop. Take advantage of the opportunity to inspect and test the machine under power at our facility.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) Pedpfx Agjwxxd Eewogu >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, High-precision drilling and milling machine Fehlmann Picomax 56TOP, Heidenhain TNC 620, Like New, CE Compliant!! Technical Data: >> Year of manufacture: 2016 Machine No.: 12416433 >> Travels X/Y/Z: 500 / 400 / 400 mm >> Distance table - spindle nose: 120–520 mm Psdpfswutrpsx Agwjgu >> Clamping surface (L x W): 908 x 480 mm >> Spindle speed range: 50–12,000 rpm >> Drive power: 9.5 kW >> Space requirement (W x D x H): 1700 x 1900 x 2500 mm >> Weight: approx. 3,000 kg About the machine: The top machine for both manual and CNC operation featuring FEHLMANN’s innovative operating concept: compact, fast, and economical. The PICOMAX 56 TOP (Touch Or Program™) precision milling and drilling machine is equipped with an entirely new operating concept that combines 3-axis CNC and manual operation via drilling lever and handwheels. It is specifically designed to perform milling, drilling, and tapping on single parts quickly, safely, and efficiently, without time-consuming programming. After only a short familiarisation, the PICOMAX 56 TOP can be operated highly efficiently even without programming skills. Even in its standard version, the FEHLMANN milling machine ‘Made in Switzerland’ offers various features of a modern, high-performance milling machine, such as: fully-digital Heidenhain TNC 620 CNC control, FEHLMANN’s proprietary liquid-cooled, high-torque motor spindle for universal milling up to 12,000 rpm, as well as Z/S-interpolated thread cutting, 3D milling, boring, and more. Tool holders including vice and accessories (see pictures) are included. Absolutely like-new condition. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: used, Year of construction: 1992, Vertical and horizontal milling machine Make: EUMEGA Type: MDV5 Year: 1992 Technical data: Make: Eumega Type: MDV5 Year of manufacture: 1992 Table size: approx. 305 x 1270 mm X-travel: approx. 460 mm Y-travel: approx. 500 mm Z-travel: approx. 610 mm Speed: variable Tool holder: SK 40 Total power: 3.75 kW Dimensions WxDxH: 1200 x 1100 x 1800 mm Weight: approx. 2.6 t All data without guarantee. A demonstration is possible at any time in our exhibition hall. Pgjdpswncwhofx Agweu

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: Psdpfxowhk Ubs Agwsgu - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table Pjdsv R E Rdopfx Agwegu - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: good (used), functionality: fully functional, 1 used tool milling machine Pgedpfx Aev N Dzfegwou Micron brand Type WF 2/3 DP with Heidenhain Type 135 linear motion control Travel X/Y/Z 400/410/400 mm Table clamping area 800 x 450 mm Speed 30 – 2240 rpm Feed rates 1 – 750 mm/rev Rapid traverse 2000 mm/min Tool holder ISO 40 Machine weight approx.: 1.4 t Space required approx.: 2.1 x 1.6 x 2.2 m

Condition: used, TECHNICAL DETAILS - spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/r] Pgjdpfxsvxw Azj Agweu - spindle stroke:210 [mm] - X axis machining range:850 / 1 000 [mm] - Y axis machining range:465 [mm] - Z axis machining range:750 [mm] - tightening dimension on table:1 570 x 500 [mm] - T slots:7 - distance between the slots:50 [mm] - width slots:12H8 - positioning accuracy:0.01 [mm] - repetition accuracy:0.005 [mm] - parts maxi weight:250 [kg] - driving power:5 [kW] - drilling capacity in steel:30 [mm] - tapping capacity in steel:M 20 - tapping capacity in cast-iron:M 24 EQUIPMENT - CNC HEIDENHAIN TNC 151 control

Condition: good (used), Year of construction: 1998, Machine is dirty Pjdpfjvptmkex Agwegu Technical condition good Rotating and swivel table is mounted