M-TECO, Sp.z o.o.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, The elumatec successor center SBZ608 is designed for reinforcement screwing, drilling, and milling of profile cuttings for window, door, and facade construction, with or without steel reinforcement. Constructed in a gantry design for large profile cross-sections and optimized process flow. The workflow runs from right to left. Infeed is via a motor-driven gripper. Lifting function allows gapless loading of the feed magazine. Profiles are guided on rollers to ensure protection of the profile and protective film. Part removal is accomplished via a push-off table. Equipped with an industrial PC running Windows operating system. Barcode scanner included. Ksdpfx Ajyl Hyajhvslp

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 1151209, functionality: fully functional, operating hours: 4,800 h, For sale due to discontinuation of production, a PVC window and door machining center. The following operations are performed: Fixing reinforcements using an automatic screwdriver and screw feeder, various drilling operations such as for hinges, handles, hardware fastening points, and drainage holes. Upgraded in 2022 with a new Windows 10 PC and settings – maintenance performed by a Soenen technician at our premises. Maico and Vorne hardware (with drilling block replacement), Salamander-programmed PVC profiles. Kljdpfex Rcwasx Ahvep

Condition: used, Year of construction: 2013, functionality: fully functional, saw blade diameter: 500 mm, CNC cutting center fully automatic CAT500 The machine is operational and ready for use Blade diameter: 500 mm Cutting angles in range: -45°/90°/+45° Operator panel with Windows Kjdpfjx Ez Igjx Ahvelp Working direction from right to left Chip extraction Waste conveyor Label printer

Condition: used, Year of construction: 2007, machine/vehicle number: 1782385, functionality: fully functional, Schirmer BAZ 1000, year 2007, in very good condition, fully operational, still installed and in working order. Available for inspection at any time, as it is currently operating in the factory. Klodpfjx Ecb Sjx Ahvjp

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 – 1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit available for up to 6,500 mm) - Material supply via chain conveyor for fully automated 9-compartment loading Kljdpfoxft I Aox Ahvop - Working direction from left to right Professional Cutting Saw: - Automatic bandsaw with pneumatic clamping system, consisting of 3 clamping elements - Infinitely variable saw feed via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is secured at the front by a light curtain. - Bandsaw drive: 1.5 kW, frequency-controlled - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in regulated operation 15-110 m/min - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 – 820 mm (Note: not adjustable independently from working height) - Part outfeed via powered roller conveyor with steel rollers - Roller-guided ejection unit across three levels onto inclined discharge table - Maximum part length via automatic outfeed: 3,500 mm (optional extension kit available for working length up to 4,500 mm) - Scrap disposal via ejection unit – max. length 600 mm - Scrap pieces discharge via chute into customer-provided waste container (Note: waste container not included) - Remnant identification indicated at placement position for manual collection by operator Software / Data Interface: - HECHT Exenso ESA software (version specified after joint pre-acceptance) Operation: - Reinforcement bars are loaded onto the feed magazine in the infeed section by the operator according to specifications/display. - Transmission of the required cut lengths for the PVC cutting center from customer’s window manufacturing software via integrated data interface - Steel is automatically conveyed and fed - Optimized cutting to the specified lengths - Transport of steel to the pick-up position in the outfeed section - Optionally, double cuts can be made upon inspection Scope of delivery: - Bandsaw - Infeed conveyor - Outfeed conveyor - Light curtain - Control system with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The system is disassembled into several packages for transport Includes: 540.1082 1x Guard fence wall connection set with door switch ESA/SSA, usable right or left; 723.5011 1x bandsaw blade M42 3320x27x0.9 12-16 TPI, fine; 942.5541 1x minimum quantity lubrication for ESA & SSA saw systems – significantly extends bandsaw blade service life; Includes: minimum-quantity lube nozzle, 1L lubricant, holder for lubricant, filter for protection against contamination; 829.0201 1x additional buffer monitor for steel terminal ESA/SSA, additional display.

Condition: used, Year of construction: 2000, machine/vehicle number: 25019, functionality: fully functional, Cutting and processing center STUERTZ STBAZ-IPT 40000-S-V Used, year of construction 2000 Fully automatic CNC sawing and processing center for PVC plastic profiles, mechanically in very good condition for this age. Sawing, processing, screwing reinforcement, drilling through steel reinforcement, label printing. Database with Gealan, Rehau and Aluplast profiles Documentation, additional photo and video available. We can carry out installation and commissioning. Kjdpjw Edyfofx Ahvolp

Condition: good (used), Year of construction: 2004, functionality: fully functional, total height: 2,500 mm, total length: 11,500 mm, total width: 3,800 mm, Soenen Hendrik DEM 3 machining centre, year of manufacture 2003-2004, equipped with tooling for processing water drainage slots and ventilation in PVC profiles, including screwing and drilling handle inserts in steel. The machine consists of a loading table with a magazine for 12 profiles, a machining unit, and an outfeed table with a magazine for 12 profiles. The machine is in good condition, has been dismantled, and is currently stored in our warehouse. A video of the system was recorded prior to dismantling and can be viewed upon request. The machine is programmed for Kömmerling 76mm AD and MD profiles; other profiles can be programmed on request. The price includes dismantling and loading onto a truck. Kedpfjrztl Sjx Ahvolp

Condition: excellent (used), Year of construction: 2011, rofile width max 140 mm Profile height max 190 mm Stave length max 6.500 mm Drilling aggregates 2 Number of milling spindles 3 For aluminium Kljdjm H Ud Uopfx Ahvop Number of clamping devices 4 Feedrate max 65 m/min Continuously variable feed Automatic feeding Yes CE marking Declaration of CE-conformity

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Klodpemzbr Sjfx Ahvep Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, STEEL CUTTING MACHINE with ONLINE-PC-STEUERUNG350 fully automatic steel cutting machine for reinforcing steel cutting in a single - or double cut according to requirement. Optimized cutting with residual lengths. The system consists of an automatic Vorlegemagazin with 12 seats, a hacksaw and a belt conveyor to the removal of cut-to-length steel profiles. Rest lengths to promote after length in a rest length basket, transport or waste basket. The steel profiles are processed in the process, while the profile bar is precisely positioned by a transport gripper with linear motor and rotary encoders. The saw cut is made from the top, Microdosier-cooling-lubrication system ensures optimum cooling of the blade. Kledpecmqkmefx Ahvjp The profile is, profile cross section regardless, pneumatically. Free-standing system with PC control or in combination with an automatic cutting machine, plastic-BAZ or SBZ. In a combination of stroke with the automatic cutting machine, BAZ or SBZ is synchronized. Profile lists for the store in the template magazine displays the employee on the TFT screen. The finished steel profiles are taken from the belt conveyor, acknowledged and filed in car, or manually pushed to the Stahlein-schubstation in the PVC profiles. New facility 10 weeks delivery time