Machinepro

Condition: used, Year of construction: 2013, Footprint: approx. 3900 x 2100 x 2280 mm Year: 2013 Serial No.: NL254130210 Max. turning diameter: 366 mm Operating hours: 21,935 h Standard turning diameter: 271 mm Max. turning length: 705 mm Bar capacity: 80 mm Swing over bed: 920 mm Swing over cross slide: 742 mm X-axis travel: 260 mm Y-axis travel: ±50 mm Z-axis travel: 795 mm Main spindle speed: up to 4,000 rpm Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing inner diameter: 140 mm Recommended chuck: 10" Turret: 12 stations Tool positions: 12 Driven tools: up to 6,000 rpm Drilling capacity, driven tools: Ø 26 mm Thread cutting: M20 Rapid traverse X/Z: 30,000 mm/min Rapid traverse Y: 10,000 mm/min Tailstock travel: 734 mm Tailstock quill: Ø 80 mm Fgodpfx Ajzz Hlgslbsg Main spindle motor: 18.5 / 18.5 / 15 kW Driven tools motor: 5.5 / 5.5 / 3.7 kW

Condition: used, Year of construction: 2004, Control system: MSG-805 Fgsdjzz Hkvepfx Albjg With chip conveyor Operating hours: approximately 64,421 hours Footprint: approx. 3200 x 1800 x 2800 mm

Condition: used, Year of construction: 2022, Model: PUMA 2600SY II Year: 2022 Swing over bed: 780 (680) mm Swing over cross slide: 630 mm Recommended turning diameter: 255 mm Max. turning diameter: 376 mm Max. turning length: 760 mm Bar capacity: 76 mm Optional bar capacity: 81 mm Main spindle speed: 4,000 rpm Main spindle nose: ASA A2-8 Main spindle bore: 86 mm C-axis main spindle: 0.001° Sub-spindle speed: 6,000 rpm Sub-spindle nose: ASA A2-5 Sub-spindle bore: 62 mm C-axis sub-spindle: 0.001° Turret tool stations: 12 [24] External turning tools: 25 [20] mm Boring bar diameter: 40 [32] mm Turret indexing time: 0.15 s Driven tools: max. 5,000 rpm X-axis travel: 260 mm Z-axis travel: 830 mm Y-axis travel: 105 mm (±52.5 mm) Main spindle motor: 22 / 15 kW Fodpfx Aljzz Hkijbjgg Sub-spindle motor: 15 / 11 kW Driven tools motor: 7.5 / 1.5 kW Coolant pump: 0.4 kW Machine height: 2,163 mm Machine length: 3,505 mm Machine width: 2,005 mm Machine weight: 6,550 kg Footprint: approx. 3400 x 1800 x 2600 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, CNC Control MSX-850 Maximum turning diameter: Ø 420 × 720 mm X/Z axis travels: 280 / 820 mm Swing over bed: Ø 995 / Ø 825 mm Maximum bar diameter: Ø 90 mm Rapid traverse X/Z: 30 / 30 m/min Main spindle diameter: Ø 300 mm Main spindle speed: 3,000 rpm Main spindle power: 22 / 18.5 kW Main spindle nose: A2-8 Number of motorized turret positions: 12 Tool speed / power: 6,000 rpm / 5.5 kW Fedpfxozz Ak Eo Albjgg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, CNC control MORI SEIKI MSG-805 MAPPS Maximum turning diameter: Ø 430 mm Maximum turning length: 519 mm X-axis travel: 230 mm Z-axis travel: 520 mm Main spindle speed: 50–6,000 rpm Fsdpfx Ajzz Agyelbegg Main spindle power: 15 / 11 kW Main spindle bore diameter: Ø 56 mm Maximum bar diameter: Ø 45 mm Sub-spindle speed: 5,000 rpm Turret positions: 12 Powered tool speed: 3,000 rpm

Condition: used, Year of construction: 2008, operating hours: 5,300 h, functionality: fully functional, turning length: 740 mm, turning diameter over cross slide: 350 mm, spindle motor power: 21 W, travel distance X-axis: 340 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 600 mm, overall weight: 6,900 kg, Equipment: documentation/manual, Gildemeister CTX 410 V4 Universal lathe Control system: Fanuc 32i Main drive: 21 kW, 240 Nm Turret: Sauter Year of manufacture: 2008 Travel distances: X-axis: 340 mm Y-axis: 40 + Z-axis: 600 mm 1 chip conveyor Tailstock Hydraulic hollow chuck, maximum draw tube inner diameter 66 mm Automatic sliding shield operation Option: Enhanced coolant pump, 12 bar, 23 l/min Coolant gun 3-jaw chuck BRD210, SMW Autoblock Foot switch for tailstock operation Tooling available upon request Fgedpfxezzzqqs Albog Documentation and export possible for an additional charge. Inspection possible while the machine is powered on. We would be happy to send you further details or arrange an on-site inspection.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, Fodpfjzzyt Dex Albsgg for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 2007, Doosan MX 2500 LST Year: 2007 Fanuc 18iT-B Includes tooling Capacity Turning length mm: 1,520 Swing diameter mm: ø 540 Swing over bed mm: ø 750 Swing over cross-slide mm: 600 Bar work capacity mm: 76 Fjdpfszzxv Rjx Albjgg Turn-mill spindle X-axis travel mm: 555 Y-axis travel mm: 160 (+-80) Z-axis travel mm: 1,595 B-axis degree: 240º (+-120º) Tool system: Capto C6 Tool storage capacity: 40 Spindle speed rpm: 10,000 Lower turret X-axis travel mm: 185 Z-axis travel mm: 1,640 Number of tool slots: 12 Speed of driven tools RPM: 4,000 Main spindle Spindle speed rpm: 3,500 Counter spindle Spindle speed rpm: 3,500 Counter spindle travel mm: 1,565 Coolant system Tank capacity liters: 500 High-pressure bar: 70

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Fjdpfszzwmuex Albogg Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: like new (used), Year of construction: 2016, operating hours: 12,000 h, Spinner TTC300 52 SMMCY Year of manufacture: 2016 Control system: Siemens Sinumerik 840D sl (2-channel operation) Operating hours: approx. 12,000 hours (counter in the control cabinet shows 12,137.0 hours) If you have any further questions, please do not hesitate to contact me. Fgjdpfx Alszzvd Ejbsg

Condition: good (used), Year of construction: 2015, Parts shown by hand not come. Upper turret have problems. Dont work. Fgjdpozzqnxefx Albjg

Condition: ready for operation (used), Year of construction: 1998, functionality: limited functionality, INDEX G200 in good condition. Limited operational capability, as the CPU for the chip conveyor is defective. Fedpfx Ajzzp Dlelbogg MAIN SPINDLE Spindle bore, clamping tension mm 60 Spindle diameter at the front bearing mm 100 Spindle nose ISO 702/1 size 5 Chuck diameter mm 140/160 Max. nominal turning diameter mm 200 Max. swing diameter mm 420 Power Pmax 100% kW 7.5/13/20 Power Pmax 40% kW 13.3/22/29 Torque Mdmax 100% Nm 35/61/95 Torque Mdmax 40% Nm 64/105/140 Speed nmax min-1 5000 Alignment and switching device (division angle 2.5°) TAILSTOCK Spindle bore, clamping tension mm 60 Spindle diameter at the front bearing mm 100 Spindle nose ISO 702/1 size 4 5 5 1) - 2) Chuck diameter mm 140/160 Power Pmax 100% kW 7.5/13 Power Pmax 40% kW 13.3/22 Torque Mdmax 100% Nm 35/61 Torque Mdmax 40% Nm 64/105 Speed nmax min-1 5000 Min. distance, clamping chuck mm 15 Longitudinal travel mm 445 Rapid traverse m/min 22.5 Alignment and switching device (division angle 2.5°) Expansion stages (main and tailstock) C-axis (resolution 1/1000 degree) Workpiece stop device Coolant line through the working spindle Air blow-out line through the working spindle Speed monitoring system TOOL CARRIER Turret heads (identical for all tool carriers) Number of tools 14 Tool system DIN 69 880 size 25x48 Further information available upon request. Errors and prior sale are excepted. Can be inspected while powered on.

Condition: used, Year of construction: 2021, Citizen Miyano BNJ-51SY6 5 Axis Fixed Headstock Lathe with Fanuc Oi-TF Control, Serial No. DV8166 (2021), Twin Spindle Collet Chucks, Twin Turret, Main Turret 12 Position all Driven, Secondary Turret 8 Position 4 Driven, Main Spindle 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Parts Catcher, Cromar Combi 500 Swarf Conveyor, Imeca Boss 545-E 5 Meter Barfeed, Serial No. 020529GA01. 5,800kg. (2) x Boxes of Driven & Static Tooling for BNJ 51. Country of Origin: Philippines Fgsdpfx Ajzzb Rdslbjg Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2021, Citizen Miyano BNJ-51SY6 Fixed Headstock Lathe 5 Axis Machine with Fanuc Series Oi - TF CNC Control, Twin Spindle Collet Chucks, Twin Turret, Main Turret 12 Position All Driven, Secondary Turret 8 Position, 4 Driven, Max Spindle 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Max Work Piece Diameter 51mm, Parts Catcher, Cromar Combi 500 Swarf Conveyor. Serial No. DV8125 (2021), Imeca Boss 551E 5 Meter Barfeed, Serial No. 020829GA03. 6200kg. (1) x Box of Driven Tooling for BNJ 51. Country of Origin: Philippines Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Fgjdpfxezzb Hfe Albeg

Condition: excellent (used), Year of construction: 2022, operating hours: 1,400 h, functionality: fully functional, turning length: 1,350 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 95 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 1,350 mm, spindle nose: A2-11, 12-tool turret Spindle speed: 12,000 rpm Tool presetter arm Chip conveyor High-pressure pump: 15 bar Autoblok SLU3.1 steady rest Fjdpfx Aozzb Amolbogg Chuck: Ø315 Bar feeder interface Tool holder set

Condition: used, Year of construction: 2014, Miyano ABX-64THY2 Twin Spindle Fixed Head Stock Lathe with Fanuc Series 31i Model B CNC Control, Triple Turret all 12 Position, Hainback Collet Chucks, 10 Axis Machine, Driven Tooling Capability, Spindle 1 - 40 - 4000rpm, Spindle 2 - 50 - 5000rpm, Max Working Diameter 64mm, IEMCA Master 21 3m Bar Feed, LNS Swarf Conveyor. S/No. CP640028 (2014) 11.350kg. (2) X Right Angle Driven Tooling for Miyano ABX64, (2) x Straight Driven Tooling for Miyano ABX64. Country of Origin: Japan Fjdpfozzbxbsx Albsgg Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2016, operating hours: 7,500 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 406 mm, spindle motor power: 18 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, Equipment: documentation/manual, Automatic measuring arm Fgodpfxozzap Ee Albsg Chip conveyor Parts collector Set of tool holders, including 2 motorized ones Presetting tools Chip conveyor Parts collector Set of tool holders, including 2 motorized ones

Condition: good (used), Year of construction: 2017, Max. turning diameter 366 mm Max. turning length 510 mm Bar capacity Ø 65 mm Travel ranges X / Y / Z 260 / 100 / 590 mm Main spindle 5,000 rpm Counter spindle 6,000 rpm Driven tools 10,000 rpm · 29 Nm Turret 12 stations, BMT Controlled axes X, Y, Z, C, B Machine weight 5,500 kg Connection current max. 115 A - Y-axis milling off-center, complete machining in a single setup - Counter spindle with synchronized transfer – machining the back side without re-clamping - Built-in motor turret (BMT) drive in the turret, stiffer and more thermally stable than VDI systems - Tool measuring probe for both spindles - Bar loader LNS Quick Load Servo 65 for bars up to Ø 65 mm, unmanned series production - Parts catcher and parts conveyor for gentle parts removal - Chip conveyor, high-pressure coolant supply - CELOS with ERGOline 21″ touch control panel Machine running time approx. 14,100 hours Program running time approx. 9,900 hours Machine price excluding shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. Fgsdezy U Nwopfx Albeg The machine can be inspected under power with short notice.

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,020 mm, turning diameter over cross slide: 580 mm, spindle motor power: 22,000 W, travel distance X-axis: 565 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,080 mm, rotational speed (max.): 4,500 rpm, overall weight: 12,000 kg, For Sale: Mori Seiki MT2000SZ Multi-Axis Turn-Mill Center For sale: A highly versatile and efficient Mori Seiki MT2000SZ multi-axis CNC turn-mill center for demanding industrial production. This machine enables complete machining of complex components in a single setup using its main spindle, sub-spindle, B-axis milling spindle, and lower turret. General Information Manufacturer: Mori Seiki Model: MT2000SZ Control Unit: MAPPS / MSG-501 (Fanuc) Year of Manufacture: 2001 Technical Specifications Capacity & Travel: Max. Turning Diameter: 550 mm Max. Turning Length: 1,020 mm X-axis Travel: 565 mm Y-axis Travel: ±80 mm Z-axis Travel: 1,077 mm B-axis (Milling Spindle): ±120° (0.001° indexing) Main Spindle & Sub-Spindle: Main Spindle Speed / Power: 4,500–6,000 rpm / 22 kW / Bar Capacity Ø 65–73 mm Sub-Spindle Speed / Power: 4,500–6,000 rpm / 15 kW C-axis: Both main and sub-spindle (0.001°) Milling Spindle (Upper Head) & Tool Magazine: Milling Spindle Speed: 10,000 rpm Milling Spindle Power: 7.5 kW Tool Magazine (ATC): 60 positions Lower Turret: Fgjdpfx Ajzy Ntkslbjg Tool Stations: 12-position turret (live tooling) Live Tooling Speed: 4,000–6,000 rpm Dimensions & Weight: Dimensions (L x W x H): approx. 3,830 mm x 2,881 mm x 2,650 mm Machine Weight: approx. 12,000 kg Features & Equipment Multi-Axis Configuration: Main spindle, sub-spindle, B-axis milling head, and lower turret Upper Head (Milling Spindle): Full B-axis for driven tools with Automatic Tool Changer (ATC) Lower Turret: Independent lower turret for flexible and high-efficiency simultaneous machining Included Accessories: Plenty of tools, chuck jaws, and user manuals, etc.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 600 mm, turning diameter: 370 mm, Machine type: CNC turning center Manufacturer: Okuma Type: LU300-2ST Year of manufacture: 2005 Control: OSP-E100L Delivery time: in stock Machine equipment - Parts conveyor belt and parts collection tray – workpiece chute with removal transport belt incl. electrical kit - 2 turret heads with VDI40 (12 + 8 stations) - Hydraulic cylinder for hollow spindle – bore in draw tube 52mm - Extension kit “D” – Kit one touch IGF-D - Open/close chuck with spindle running via M-code - Reinforced coolant pump 8 bar - Coolant can be switched to A and B turrets via M-function - Interface for connecting bar feeder - Chip conveyor Technical details - Swing diameter over bed: 530mm - Swing diameter over carriage: 380mm - Distance between centers: 600mm - Max. turning diameter: 370mm - Max. turning length: 600mm - Travel X-axis: upper 260mm / lower 140mm - Travel Z-axis: upper 640mm / lower 615mm - Rapid traverse X-axis: 20,000 mm/min - Rapid traverse Z-axis: 25,000 mm/min - Spindle speed: 45 ~ 5,000 rpm - Spindle bore diameter: 62mm - 2 tool turrets: upper 12 stations, lower 8 stations - Spindle power: 22/15 kW Fgsdpfx Ajzy Iq Ujlbjg - Machine dimensions LxB: approx. 2950 x 2050mm - Machine height: approx. 2010mm - Weight: approx. 6500 kg Optional - Transport organization and execution - Machine delivery and installation - Machine commissioning

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Fedpfozy Hx Djx Albogg Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: good (used), Year of construction: 2007, The Emco Maxxturn 45 SM is in good condition and is still in use daily for production on the Emco Maxxturn 45. Primarily, parts made of plastic are manufactured on this machine. Spindle hours: only 23,848 hours. Approximately 6 months ago, the machine control panel with display and the air conditioning unit were replaced. Last maintenance performed in 04/2026; geometry was checked. The machine can still be inspected during production until week 39 of 2026. Technical data: Control: Siemens 840 D. Main spindle: Speed 6,300 rpm. Counter spindle 6,300 rpm. Spindle bore max. 45 mm. 2 x C-axis, 0.001°. High-pressure coolant system at the tool turret. Chip flushing for the counter spindle. Sauter tool turret with 12 stations, VDI25. All stations for driven tools. Speed range: 6,000 rpm. Travel in X/Z axis 160/510. Accessories: Chip conveyor Knoll. Fjdpfx Ajzyyp Ajlbsgg High-pressure coolant pump. Finished parts collector. Interface for bar feeder. New control cabinet air conditioning unit. LED indicator light, 4 wedge shoes, machine documentation. Machine keyboard with cover. 8 rigid tool holders VDI 25. 2 x axial driven tools. 1 x radial driven tool. The tools and clamping devices shown in the picture are not included in the sale.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 510424, Equipment: documentation/manual, Machine in very good condition. Y and B axes available, with a subspindle. It is connected to power and can be inspected at any time. The machine is 100% complete, with numerous driven tool holders and spindle diameter reducers. Fgsdpfx Aljzyypcjbsg 2 x HAINBUCH 65 BZI. Parts conveyor, chips conveyor, and Sameca bar feeder available. 2 x Spindle bore 60 mm. Tool holders VDI25.

Condition: used, Year of construction: 1995, turning diameter 510 mm turning length 1000 mm control MAZATROL T PLUS total power requirement 22-26 kW Fodpfxjzyvcre Albjgg weight of the machine ca. 6,5 t

Condition: used, Year of construction: 2005, turning diameter 170 mm Max. Turning length 120 mm bar capacity 52 mm control FANUC MSX-501 travel -x1 axis 140 mm travel -x2 axis 140 mm travel -z1 axis 450 mm travel -z2 axis 410 mm travel -y axis +/- 40 mm travel - b axis (spindle 2) 525 mm speeds station 1 60 - 6000 U/min spindle bore 1 62 mm speeds station 2 60 - 6000 U/min spindle bore 2 62 mm Fedpfjzyvb Iox Albjgg driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - ZT 1500 Y equipped with 2 turrets for driven tools, Y-axis and bar loader. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZT1500Y | ZT-1500 Y | ZT 1500Y | ZT-1500-Y