Wilest OÜ

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00738, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA manufactured in 2013.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2013.05 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Pjdo Agnztopfx Adlsgu Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00737, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA manufactured in 2012.01. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2012.01 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250 Pgjds Agnyrjpfx Adlou   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.01 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00735, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA manufactured in 2013.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Pjdpfs Agnwtox Adlsgu Model Number: A05B-1222-B202 Year of Manufacture Robot: 2013.05 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: ready for operation (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, Complete ABB welding robot system consisting of: Robot IRB 2400, floor-mounted, with IRC 5 M controller, 2004 Welding equipment Fronius TPS 5000, wire feeder, welding torch, torch cable package Manipulator IRBP 750 K, 2-station rotary table with a center-to-center distance of 2500 mm and a swivel radius of 500 mm. Load capacity per station: 750 kg Light curtain in front of the loading station The system is still in operation and can be inspected. The system still needs to be dismantled. Assistance is possible. Pgedpfx As Agnp Nsdlou The system will be available from the end of November.

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00743, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2015.08. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard! Pjdpj Agm Tfsfx Adlsgu   Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Year of Manufacture Robot: 2015.08 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1260   Controller: IRC5 Year of Manufacture Cabinet: {year_of_manufacture_cabinet} RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10 kg, arm reach: 1,249 mm, controller manufacturer: FANUC, controller model: R-30𝑖B Plus (Mini Plus Cabinet), teach pendant manufacturer: FANUC, teach pendant model: Tablet Teach Pendant, type of input current: AC, repeat accuracy: 0.04 mm, warranty duration: 24 months, Equipment: documentation/manual, Automated Cobot Metrology Cell with Creaform HandySCAN BLACK|Elite & PolyWorks Teximp Cobot Metrology Cell is a flexible, accurate and compact solution for quick, reliable and repeatable 3D scanning of your products. The CMC-10 is based on Fanuc CRX-10𝑖A collaborative robot. We are offering a complete, high-performance collaborative robotic measuring cell designed for automated 3D metrology and dimensional quality control. The system is fully equipped and ready for integration into your production line. The system consists of: 1) Creaform HandySCAN BLACK|Elite Scanning System • Scanning Device: HandySCAN BLACK|Elite handheld/robotic 3D scanner • Software: Creaform.OS software suite included • Calibration: Dedicated calibration plate • Positioning Targets: 2,000 reflective positioning markers included • Power Supply: Standard power supply unit • Connectivity: Custom 4-meter USB cable for extended reach • Storage & Transport: Heavy-duty hard transport case for the scanner 2) Technical Specifications (Creaform HandySCAN BLACK|Elite) • Certification: Acceptance testing based on VDI/VDE 2634 Part 3 standards • Volumetric Accuracy: 0.020 mm + 0.040 mm/m • Accuracy: Up to 0.025 mm • Measurement Rate: 1,300,000 measurements/s • Light Source: 22 blue laser crosses (+1 extra line for deep pockets) • Stand-off Distance: 200 mm – 450 mm 3) PolyWorks | Inspector Standard Software Package • License Type: Node-Locked license (tied to a single workstation) • Platform: Universal 3D metrology software platform for dimensional control • Meshing: Real-time quality meshing for high-quality polygonal models • Compatibility: Includes all plug-ins for manually operated point cloud digitizing and probing devices • Support: 1 year of PolyWorks comprehensive technical support and software maintenance (IMSupport) included 4) System Infrastructure & Hardware • Automation Interface: R-Series I/O Module for seamless robot-to-scanner communication • Workstation: High-performance metrology PC Pgodpfx Ao Agkn Sodlou • Display: 27’’ Professional monitor • Accessories: Ergonomic monitor stand and keyboard 5) Training & Services Included • Professional Training: Comprehensive operator training covering both robot operation and specialized metrology equipment usage. System Features & Key Benefits: • Automated 3D scanning of parts or assemblies • Scan-to-CAD comparison and measurement report generation • Repeatable scanning paths and reduced operator dependency • Ideal for quality control, reverse engineering, and prototype validation • Mobile and transportable cell (mounted on a heavy-duty wheeled platform) • Fully programmable and customizable scanning paths • Dual-mode versatility: The scanner can operate both on the robot arm and as a standalone handheld device • Capable of scanning large components and assemblies, with automated paths limited only by the robot's 1249 mm reach • Intuitive Teximp HMI: Cell control and custom scanning path programming are simplified via a user-friendly Teximp HMI interface running directly on the FANUC Tablet Teach Pendant.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00709, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.04 RCC Length (m): 7   Pode Agbfvspfx Adlegu Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00742, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190 Pjdpfe Af U E Eox Adlogu   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.10 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.03 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-35P is based on Fanuc M-20iD/35 robot arm adapted for handling pallets or vises. It consists of: 1) Robot: Fanuc robot M20iD/35 6-axis vertical robot Load capacity 35 kg / reach 1831mm R-30iB Plus controller A-cabinet I/O modules; DI32 / DO32 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Loader Table: Compact but heavy loader table with front entrance. Table size: 980 x 700 mm Docking station with four pockets Three locating pins for quick pallet exchange ReeR safety light curtain, Cat. 4 Three control buttons Pjdj Af Uxxepfx Adlogu LED status beacon Electrical cabinet and cables included 3) Pallet Rack The URC-35 Palletizing cell can be equipped with 1 or 2 large-capacity racks with 42 pockets. Large rack (42 pockets) - included as standard Second large rack (42 pockets) - optional 4) Vices & Zero-point clamping system The system is designed for: - Lang Vices (not included in price) - Lang Zero-Point clamping system (not included in price) - Note: it can also be implemented to work with pallets instead of vices (not included in price) 5) Safety Options: Cage (standard) ReeR safety light curtains (cat.4) on Loader table (standard) Plexiglass cover on Racks (standard) ReeR Mosaic M1 safety controller (standard) 6) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC (I/O, safety, program call -> all via Ethernet cable communication) Preparing for a Clamping device Preparing for a PAD Preparing for an external Air Blow 7) Gripper Configuration The Teximp Gripper Interface includes everything needed for gripping the vices Gripper carrier Schunk Gripper JGP-P 160-2 Stroke per jaw [mm] = 8 Recommended workpiece weight [kg] = 24.5 Preparation for vice/pallet clamping Sensors for gripper state detection - clamped/unclamped Blower nozzle Laser sensor (for vise presence detection) 8) Automatic Door system URC-35 Palletizing can be equipped with a pneumatic auto door (PAD) for selected Haas machines. Available PAD models include: a) PAD-HaasUMC-side b) PAD-HaasVF-side c) Can be made for other machines (not included in price) 9) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Important Note: Operators can easily assign different .nc machining program to each Vise via HMI, robot calls assigned program on CNC machine by scanning QR code on each vise! - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: ready for operation (used), Year of construction: 2023, load capacity: 13 kg, arm reach: 1,300 mm, number of axes: 6, This 6-axis Universal Robots UR10e was manufactured in 2023. It features a reach of 1,300 mm and a payload capacity of 12.5 kg, making it suitable for various applications. The robot is equipped with an integrated 6-axis force/torque sensor and comes with a Smooth Robotics Welding Integration Kit. If you are looking to get high-quality welding capabilities, consider the Universal Robots UR10e collaborative robot we have for sale. Contact us for further details. • Condition: DEMO unit (minimal running hours) • Pose repeatability: ±0.05 mm (ISO 9283) • Axis working range: ±360° on all 6 joints (J1–J6) • Joint speeds: • Base/Shoulder (J1, J2): ±120°/s • Elbow/Wrists (J3–J6): ±180°/s Pgodo Af Uu Ajpfx Adlju • Integrated force/torque sensor: 6‑axis at tool flange (0.1 N force resolution, 0.02 Nm torque resolution) • Control unit: UR e‑Series Control Box • Teach pendant: 12" touchscreen with Polyscope interface • Programming: Lead‑through teaching (hand‑guiding) • Ingress protection: IP54 • Power supply: Single‑phase 100–240 VAC, 50–60 Hz • Power consumption: Approx. 350 W (depending on payload and speed) Additional equipment • Welding integration kit: Smooth Robotics hardware kit (torch mount, brackets, integration cabling) • Software: SmoothTool Welding Software, permanent (lifetime) license; includes dedicated welding motion paths (linear, circular, weave patterns) • Interface module: Demo Retrofit Kit I/O for direct digital/analog communication between the cobot and a welding power source

Condition: like new (used), Year of construction: 2022, operating hours: 931 h, functionality: fully functional, load capacity: 8 kg, arm reach: 2,032 mm, controller manufacturer: FANUC, controller model: R-30iB Mate Plus, teach pendant manufacturer: FANUC, ROBOT ARM MANUFACTURER: FANUC Podpfxs Af Rc Io Adlsgu MACHINE TYPE: ARC Mate 100iD/8L TECHNICAL SPECIFICATIONS PAYLOAD: 8 kg REACH: 2032 mm YEAR OF MANUFACTURE: 2022 CONTROLLER: R-30iB Mate Plus OPERATING HOURS: 931 hours

Condition: like new (used), Year of construction: 2020, operating hours: 1,799 h, functionality: fully functional, load capacity: 10 kg, arm reach: 1,450 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, ROBOT BRAND: ABB MODEL: IRB 1600-10/1.45 TECHNICAL DESCRIPTION PAYLOAD: 10 KG MAXIMUM REACH: 1450 MM YEAR OF MANUFACTURE: 2020 CONTROLLER: IRC 5 SOFTWARE: 6.11 Pjde Af Nqcjpfx Adlogu OPERATING HOURS COUNTER: 1799 hours WELDING EQUIPMENT FRONIUS TPS 400i WITH WATER COOLING 1-AXIS ABB IRBP L 300 IRBP L300: OPERATING HOURS COUNTER: 69 hours

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Several KUKA robots, models KR 210 and KR 500. Pedpfx Aj Af I A Eodlsgu Fully functional.

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12D is based on Fanuc M-10iD/12 robot arm suitable for middle size machines and specifically adapted for handling vices. It consists of: Podpfx As Af Iiwedljgu 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Drawer palletizing system: Usable space per one drawer: 1000 x 480mm Max 5 drawers (depends on the height of the pieces) Load capacity of one drawer: 250 kg Reer safety light curtain, cat.4 Drawer opening possible from both sides LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00741, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.09. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.09 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Pedpfo Afzxyox Adljgu Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.08 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12 is based on Fanuc M-10iD/12 robot arm suitable for middle size machines. It consists of: 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Part Table: Compact but heavy part table with front entrance. Table size 980 x 700mm Three pins for quick pallet changing Reer safety light curtain, cat.4 Control button 3 LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Pgodpo Afx Ryjfx Adlou Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00707, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Pgsdpfxj Afuy Ro Adlou Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Robot complete with accessories Pgedps Afi Ucjfx Adlsu

Condition: ready for operation (used), Year of construction: 2001, consisting of - rotary/swivel device Motoman Robotec, year of manufacture 2001 - 2 welding robots Motoman Robotec - 2 torch cleaning devices - 2 welding transformers Leipold LSQ4 - 2 wire feeders - 2 recirculating air cooling units EWM UK500 and UK500R - control system Motoman Robotec XRC Pgedpfxe Afdm To Adlju - 2 control systems Leipold Multiprocess-Q8P - control system Siemens Simatic HMI / Simatic OP17 - widescreen TFT monitor HP, 23 inches Further information can be found under "Visit Auction".

Condition: used, Year of construction: 2021, load capacity: 4 kg, arm reach: 600 mm, The 2021 KUKA KR 4 R600 (AGILUS) is a compact, high-speed, 6-axis industrial robot designed for precision handling, small-part assembly, pick-and-place and other light-duty automation applications. 2021 KUKA KR 4 R600 Industrial Robot – Compact 6-Axis Robot Manufacturer: KUKA, Germany Model: KR 4 R600 (AGILUS) Year of Manufacture: 2021 Number of Axes: 6 Rated Payload: 3 kg Maximum Reach: 601 mm Repeatability: ±0.015 mm Robot Weight: Approx. 27 kg Podpfxe Afcigj Adlsgu A compact, high-precision industrial robot suitable for pick-and-place, small-part handling, precision assembly, machine tending and inspection applications. Ideal for automation integrators, machinery manufacturers and industrial automation projects. Controller, teach pendant, operating condition and accessories: To be confirmed.

Condition: used, Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, load capacity: 2,000 kg, arm reach: 2,400 mm, Equipment: documentation/manual, For sale is a like-new IGM RTE 478-S welding robot, manufactured in 2022! This is a 7-axis robot with a 9-meter travel range and two stations, each equipped with a 2-axis L-manipulator with a load capacity of up to 2000 kg. Robot type: RTE 478-S in a suspended position. Control system: Fully digital PC robot control system, type RCE. Welding process: Single-wire welding process. Welding equipment: Digital inverter welding power source TPS 500i. The system can be inspected and tested upon request. Psds Ad R Eaepfx Adlogu The robot was operated in a single-shift operation and has few operating hours!

Condition: like new (used), functionality: fully functional, load capacity: 205 kg, arm reach: 2,750 mm, ROBOT ARM BRAND: ABB MODEL: IRB 6640-205/2.75 TECHNICAL DESCRIPTION PAYLOAD: 205 KG Pedps Ad Ni Defx Adlegu MAXIMUM REACH: 2800 MM

Condition: like new (used), functionality: fully functional, load capacity: 210 kg, arm reach: 2,800 mm, controller manufacturer: kuka, controller model: krc2 ed 05, teach pendant manufacturer: kuka, ROBOTIC ARM MANUFACTURER: KUKA MACHINE TYPE: KR210-2 TECHNICAL SPECIFICATIONS PAYLOAD: 210 kg REACH: 2800 mm YEAR OF MANUFACTURE: 2007 Pgsdpfxj Ad Niko Adlou CONTROLLER: KRC2 ED05

Condition: like new (used), Year of construction: 2014, functionality: fully functional, load capacity: 210 kg, arm reach: 2,700 mm, controller manufacturer: kuka, controller model: krc4, teach pendant manufacturer: kuka, ROBOT ARM MANUFACTURER: KUKA Pgode Ad Nhtepfx Adlsu MACHINE TYPE: KR210 R2700 prime TECHNICAL SPECIFICATIONS PAYLOAD: 210 kg REACH: 2700 mm CONTROLLERS: KRC4

Condition: like new (used), Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, load capacity: 500 kg, arm reach: 2,550 mm, ROBOTIC ARM BRAND: ABB MODEL: IRB 7600 - 500 / 2.55 Pgedpfs Ad Nhgex Adlsu TECHNICAL SPECIFICATION PAYLOAD: 500 KG MAX. REACH: 2550 MM CONTROLLER: IRC 5