RS-ImmoPro GmbH

Condition: used, Year of construction: 2017, Operating hours: 51,800 h Program run hours: 15,100 h Technical data: Max. speed: 12,000 rpm Power: 77 kVA Lhedpfx Abjxqp Ivj Uon Weight, approx.: 18,100 kg

Condition: used, Year of construction: 2015, Machine weight: 9,000 kg, HEIDENHAIN control terminal, clamping table size: approx. 130x70 cm, 30-position tool changer, chip conveyor, mobile band filter. Ledpfx Abjxnal To Ujhn

Condition: used, Year of construction: 2008, Travel paths (X/Y/Z): 4,000x2,000x1,200 mm, 60-position tool changer SK50, angular head (manual), control: FANUC 18i-MB, 1 chip conveyor Ljdpfoxnalaex Ab Uehn

Condition: used, Year of construction: 2003, Travel paths (X/Y/Z): 3,000x3,000x1,200 mm, 60-position SK50 tool changer, automatic angle head, rotary table, control: HEIDENHAIN iTNC 530, 1 band filter system KNOLL PF 100/1000, year of manufacture: 2003, 1 chip conveyor Lhsdsxnak Nspfx Ab Usn

Condition: used, Year of construction: 1998, operating hours: 95,000 h, machine/vehicle number: IntNr231314, Technical Data CNC control: FANUC 16iM - 16i Operating hours: 95,000 h Travel (X × Y × Z): approx. 500 × 380 × 300 mm Table size: 650 × 380 mm Spindle taper: ISO/BT 30 Spindle power: approx. 5.5 kW Spindle speed: up to 8,000 rpm Rapid traverse: approx. 48 m/min Tool magazine: approx. 14 positions (ISO30 - BT30) Chip and coolant tank with pump Lsdpexiwv Ssfx Ab Uehn Integrated fluid lubrication system The machine can be inspected under power by prior appointment. Technical data and specifications are subject to change and correction. Prior sale reserved!

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231358, Heidenhain iTNC 530 Control Program Run ON: 49,000 hours Spindle ON hours: 42,300 Axes in movement: 45,000 X travel: 850 mm / automatic: 650 mm Y travel: 700 mm / without tool change, automatic: 600 mm Ljdpfxexiwhuo Ab Uohn Z travel: 500 mm / automatic: 500 mm Main Spindle: Max. speed: 18,000 rpm Internal coolant supply (IKZ) External coolant supply (AKZ) Main spindle drive power: 19 kW Tool holder: SK 40 Swiveling Rotary Table: Table diameter: 280 mm Swivel range A: -30° / +115° Rotational axis C: 360° Max. table load: approx. 1,000 kg Speed A: 25 rpm / C: 65 rpm Tool Changer: Number of tool stations: 32 Number of magazine positions: 88 Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 125 mm Max. tool length: 300 mm Max. tool weight: 8.0 kg Feed Rates: Rapid traverse (X / Y / Z): 45 m/min Measuring system resolution: 0.0001 mm Total connected load: 41 kVA Machine weight: approx. 9.5 t Accessories: Complete documentation Chip conveyor Coolant unit Internal coolant supply Hydraulic unit NC swiveling rotary table Tool changer 2 x 80 positions Electronic handwheel Renishaw probe The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: repair required (used), Year of construction: 2005, functionality: limited functionality, machine/vehicle number: 101121, travel distance X-axis: 230 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 3, number of slots in tool magazine: 72, tool length: 220 mm, input voltage: 380 V, type of input current: three-phase, PORTACENTER is a 3-spindle CNC machining center designed for high-precision operations such as milling and drilling steel, brass, cast iron, aluminum, and more. The machine we are offering is no longer capable of producing reliably. Our Italian subcontractor offers a complete retrofit of this machine for €300,000. Today, a new equivalent machine costs around €800,000. Ljdpfsxg Rxnex Ab Uohn

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies Lsdpfx Ajxdwndjb Ujhn - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: good (used), Year of construction: 2015, operating hours: 10,050 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 7,000 mm, travel distance Z-axis: 1,700 mm, controller manufacturer: KIMLA, workpiece length (max.): 7,000 mm, workpiece width (max.): 2,000 mm, number of slots in tool magazine: 10, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Device purchased for custom external orders, very lightly used and in excellent technical condition. Equipped with a 5D HSD spindle 12 kW 24,000 rpm, vacuum table, 3D control module, digital AC servo drives, HIGH Speed Machining technology, tool correction sensor, control cabinet, control computer, Becker vacuum pump, automatic oil mist, automatic tool change, automatic tool magazine for 10 HSK63 cones, regular maintenance in Poland. Lsdpoxc Ey Sjfx Ab Uohn

Condition: like new (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 28 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 28 m/min, overall weight: 3,000 kg, spindle motor power: 4,000 W, input voltage: 380 V, Equipment: USB port, SLX model with 8 milling tools, 4 radial, 4 axial, and a grinding wheel with 8 turning tools. Parts catcher, pusher bar, cutting fluid pump. Ledpfx Asxbqfkob Ujhn

Condition: used, Year of manufacture 1997 2 grid tables Working area X 3,900 mm Working area Y 1,600 mm Working area Z 200 mm Ljdpsw Uf N Sofx Ab Uehn Additional images available

Condition: ready for operation (used), Year of construction: 2023, operating hours: 8,900 h, functionality: fully functional, Heller HF5500 including Fastems FPT 1000 Heller HF5000 5-axis machining center Control: Siemens Sinumerik SL Spindle: HSK100 Tool magazine: 100 tools Fastems FPT1000 Lhedpfx Aow I Tupob Uen 18 pallet stations Planning software (unmanned shift)

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 /100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] Ljdjw Huhcepfx Ab Uohn MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120/ 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrobroche Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18 000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrobroche Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9000 [rpm] * Spindle power : 0.25 [kW] * Spindle type : Electrobroche Ø120 - Number of spindles : 1 - Tool holder type : HSK40 * Spindle speeds : 8710 [rpm] * Spindle power : 3.8 [kW] * Spindle type : Electrobroche Ø38 - Number of spindles : 2 - Tool holder type : ISO10 * Spindle speeds : 9000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] - Equipment EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120 - Loader - Fire-fighting device - Fitting

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, The machine is not more in use and therefore is for sale. It is in our ownership from 2008. It has new computer from 2021. We recommend inspection service from manufacturer "Dubus". We can send more pictures if needed. For more details and price contact us. Lsdpfxewwtucj Ab Uehn

Condition: ready for operation (used), controller manufacturer: Fanuc OM, total height: 3,240 mm, total length: 4,100 mm, total width: 6,850 mm, empty load weight: 18,000 kg, additional equipment features: yes, Type: ACE-H80 X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency: 20 -> 4500 rpm Number of pallets: 2x Power principal motor: 70 kva Cooling-system: yes Lhjdpfxowttrmo Ab Uen

Condition: like new (used), Year of construction: 2022, Fully automatic straightening center for bandsaws we are selling it after little use because we had a generational change in the company and in the course of this, converted the entire machine park to Iseli. Previously we had the predecessor model for many years and were very satisfied. In one setup, automatic and uncompromising machining of all bandsaw blades Leveling, tensioning, back straightening, maintaining rest period Evenly processed bandsaw blades Better cutting speed, reduced cutting loss Less specialist staff, better quality in the sharpening room Technical data: Connection values: Electrical: 400 V 50 Hz or special voltages Compressed air: 1/4″ gas thread Air pressure: minimum 5 bar, 0.7 liter per stroke Saw blade dimension: Blade width: 60 mm to 305 mm / 60 mm to 381 mm, special up to 420 mm Ljdpfowrx Rrjx Ab Uehn Blade length: from 4200 mm Processing time: Saw blade 206 mm x 10 m approx. 30 min Leveling tolerance: 0.02 mm - 0.03 mm Tension tolerance: 0.02 mm compared to the calculated tension curve or the stored optimum curves Tension: all desired tension profiles adjustable Control: PLC control Dimensions: Length without deflection: 2200 mm Height: 1540 mm Width: 1115 mm Working height: 1110 mm Weight: 1120 kg The machine can be inspected on site!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 6069, Reinforcement deck included Fully functional Lhjdswml Eljpfx Ab Uen

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Lhjdpfewhdhzsx Ab Uon Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2434, nominal power (apparent): 16 kVA, input voltage: 400 V, 4.5 kW spindle (2800-18000 rpm) pneumatic rotary table -90 °, 0 °, +90 °, intermediate angles manually set 4 pneumatic clamps pneumatic bumpers quick tool change system cooling system Ledswgmxtjpfx Ab Ushn Windows 10 touchscreen operator panel with online access automatic tool diameter correction axes operating on linear bearings, brushless motors axes working range: X – 3050 mm, Y – 410 mm, Z – 300 mm, I – 180°

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Lhsdpfx Aswdt Ezob Ujn Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industry: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Reference number: 1210 Availability from: July 2025 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle specifications: 13 kW / 10.3 Nm; 12,000-24,000 rpm; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 3500 x 1500 x 700 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 81426, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, torque: 71 Nm, controller manufacturer: Arumatik Mi, controller model: Mi, workpiece length (max.): 400 mm, workpiece diameter (max.): 350 mm, table width: 254 mm, table length: 254 mm, table load: 100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 15,000 rpm, distance table to spindle center: 365 mm, distance table center to spindle nose: 390 mm, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 40, tool weight: 2 g, Equipment: chip conveyor, documentation/manual, Table dimension: 254x254 mm no. pallet 2 table load capacity 100 kg Travels XYZ 305x305x330 mm 4th axisa table 0,001-360 degree Spindle BT30 15.000 RPM Max torque 71.6 Nm Spindle motor 7,5 kw rapid feedrate XYZ 60 m/min Lodpfxjv U U Dhe Ab Uehn Tool magazine 40 Automatic pallet changer 1,8 sec Machine dimension 1650x2920x2501 Machine weigth 4200 kg Scraper chip conveyor

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: December 2011 Pallet Size: 500mm x 500mm Movement: - X: 800 mm - Y: 800 mm - Z: 800 mm Max Workpiece: Ø 900 mm x 1000 mm Max Table Load: 1000 kg Spindle Speed: 10,000 rpm (2 gears) Spindle Power: 30/37kW Spindle Taper: CAT 50 Rapid Traverse X/Y/Z: 60 m/min Ljdjv Tvivepfx Ab Uehn Tool Magazine: 80

Condition: used, Year of construction: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Lhsdpfx Abev Tvh Ss Uen Year: July 2011 Pallet Size: 500 x 500 mm Movement: - X: 730 mm - Y: 730 mm - Z: 740 mm Spindle Speed: 12,000 rpm Tool Changer: 40 positions Chip Conveyor: Chrome

Condition: excellent (used), Year of construction: 2015, Summary of the technical specifications of the Starrag Heckert HEC400D (built in 2015): ### Basic data - Control: SIEMENS 840D sl HMI Operate - Travel ranges: - X/Y/Z: 650/650/680 mm - B-axis: 0–360° (full-fledged 4th axis) - Speeds: - Rapid traverse X/Y/Z: 65 m/min - Milling feed: 1–65,000 mm/min - Acceleration X/Y/Z: 9/9/8 m/s² - Feed forces: - 60%: 9,000 N | 100%: 7,500 N ### Rotary axis (B-axis) - Manufacturer: Fertigungstechnik Weißenfels GmbH - Max. rotation: 80 rpm - Indexing: 0.001° - Torques: - Clamping torque: 3,000 Nm - Tilting torque: 5,000 Nm - Continuous torque: 550 Nm ### Pallet changer - Number of pallets: 2 (machine/setup station) - Pallet size: 400 × 500 mm - Load capacity: 500 kg/pallet - Changeover time: 8–10 seconds Lodpfx Abov Snvrs Ushn ### Tool magazine - Capacity: 60 pockets - Tool holder: HSK-A63 - Max. tool diameter: Ø80 mm (Ø160 mm with free adjacent pockets) - Max. tool weight: 10 kg - Chip-to-chip time: 3–4 seconds (depending on weight) ### Spindle - Speed: 50–10,000 rpm - Drive power: 31/24 kW - Coolant: 7 pressure levels up to 50 bar (optional 80 bar) ### Accuracy - Positional uncertainty (X/Y/Z): 0.006 mm - Positional variation (X/Y/Z): 0.004 mm - Reversal range (X/Y/Z): 0.003 mm - B-axis: 6 arcsec (uncertainty), 4 arcsec (variation) ### Other - Noise emission: ≤80 dBA - Coolant volume: 420 liters (standard) / 2,250 liters (optional) - Machine weight: approx. 12,000 kg (without accessories) - Operating voltage: 400 VAC, 50 Hz - Pneumatics: 6–8 bar input pressure ### Special features (optional) - High-performance spindle: 10,000 rpm, up to 37 kW for heavy-duty machining - Air extraction: EU13 filter (99% purification) - Water jet: 70 l/min coolant flow ### Additional features - Remote diagnostics, pallet sequence operation, operating hours display, German/English interactive interface. The machine is painted in RAL 7035/7005/7016 and has a closed work area enclosure in accordance with accident prevention regulations.

Condition: ready for operation (used), nominal power (apparent): 45 kVA, controller manufacturer: Fanuc Series 18i-MB, total length: 11,000 mm, total width: 6,000 mm, empty load weight: 24,000 kg, Type: MCH-800 Distance of spindle end to table center: 300 1300 mm Distance of spindle center to table surface: 50 1050 mm Max workpiece dimensions: 1400 x 1200 mm cooling through spindle X-axes: 1350 mm Lhsdpfx Asv Sfqgjb Usn Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: (5x) 800 x 800 mm (continuous indexing) Max weight on the table: 2 ton Admission in spindle (ISO): ISO-50 Power on the spindle: 18,5 kW Toolstore: yes Tools: 90 positions Frequency: 1 > 6000 rpm (option!!)