Jonas Consulting + Engineering

Condition: like new (used), Milwaukee inspection camera M12 ICAV3 with battery and charging station Lhsdexqptfjpfx Ab Usn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, operating hours: 13,056 h, machine/vehicle number: D 1101C3792, actuation type: electric, controller manufacturer: TRUMPF, laser type: CO₂ laser, laser source manufacturer: TRUMPF Lasertechnik, laser source model: TruFlow 3200, laser hours: 1,359 h, laser power: 3,200 W, laser wavelength: 10,600 nm, Equipment: CE marking, cooling unit, documentation/manual, CO2 Laser TRUMPF Type TruFlow 3200 3200 Watt average output power Model: TruFlow 3200 Year of manufacture: 2016 Beam on: 1,359 h (current) Laser on: 13,056 h (current) Including the following scope of delivery: • Base unit TruFlow 3200 • Pilot laser • Side beam exit (Y configuration) • Analog input: laser power control • Digital (BCD) interface • Air-cooled chiller by Riedel (see nameplate) • Portable control panel, 20m cable • Fine adjustment • Base plate for customer-specific frame All information provided without guarantee The laser is being sold due to the cessation of operations. Ljdsxqm U Tepfx Ab Ushn The laser is used for welding in a low-dust industrial hall and is therefore in good condition. The laser is still occasionally in use, so the operating hours may increase slightly. The laser is still electrically connected and can be inspected under power. Further details available on request or during an on-site inspection. Inspection by appointment only. Location: Gotha/Thuringia, near A4 motorway, Germany Net price plus current VAT, no warranty or returns, ex works without packaging. Dismantling, packaging and transport are the responsibility of the buyer, support can be provided.

Condition: ready for operation (used), Fanuc R-2000iB/165F industriële handlingrobot met R-30la-controller - X-reis van de robot: 15 meter - 20 meter werkbereik als je de zwaai aan de linker- en rechterkant meetelt - 6 assen Ledpfx Aoxqh Rveb Uehn - bereik: 2655 mm - max 125 kg laadvermogen Robot gemonteerd op Winkel robotgeleiding RLE-2000

Condition: ready for operation (used), Type: 817 CLM Meetfout: 1,8 + L/600 µm (L in mm) Herhaalbaarheid: 0,5 µm Dynamisch meetsysteem: zorgt voor een hoge herhaalbaarheid Luchtlagers: zorgen voor lichte en soepele bewegingen Gemotoriseerde meetwagen: vereenvoudigt meetritten Lhodpfx Abexp Skke Uon Geïntegreerde oplaadbare batterij: biedt een lange gebruiksduur voor metingen die niet op het lichtnet zijn aangesloten Bedrijfstemperatuur: 10°C tot 40°C Gewicht: ongeveer 25 kg (55,15 lbs)

Condition: used, Power: 1 kW (2 HP) Voltage: 220 Tank pressure: 4 bar Volume: 30 l Manufacturer : Olsa Type : Melter Volume : 30L   Tank bottom agitation: dispersion rotor Pressure inside : 1 bar Pressure gauge Temperature sensor H+ Valves safety valve (ATEX Jacketed : Water pressure : 4 bar Steam pressure : 4 bar Materials: stainless steel Power : 1,5 kW Lhjdpfx Aexp R Uzob Uon Moteur speed : 3000 tr/min Electrical supply : 220 V Heat : external supply

Year of construction: 2022, condition: used, functionality: fully functional, Reduction furnace for N2/H2 atmosphere - BADER & SCHEFFER Lsdpfxoxp Exus Ab Ujhn

Year of construction: 2000, operating hours: 25,616 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC430 B Main Drive Number of axis 3 Movement X-Axis Movement 3000 mm Y-Axis Movement 1400 mm Z-Axis Movement 1500 mm This 3-axis SACHMAN T22 HS was manufactured in 2000 and features a Heidenhain TNC 430 B digital control, a 20-fold tool changer SK 50, and a table size of 3,000 x 1,400 mm. It includes an adaptable high-speed spindle capable of 30,000 rpm and a travel range of X=3,000, Y=1,400, Z=1,500 mm. Consider the opportunity to buy this SACHMAN T22 HS Bed Type Milling Machine. Contact us for more information about this machine. Ledpfx Aboxpyndj Uehn Application Types Milling

Year of construction: 2002, operating hours: 45,709 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 430B Movement X-Axis Movement 3000 Y-Axis Movement 1600 Z-Axis Movement 1500 This 6-axis SACHMAN TRT 314 HS was manufactured in 2002 and features a 40-position SK 50 tool changer, internal coolant supply, and a 2-position pallet changer. It boasts a table size of 2,000 x 2,000 mm and an adaptable high-speed spindle reaching 30,000 rpm. Control is managed via Heidenhain TNC 430 B digitised. If you are looking to get high quality milling capabilities consider the SACHMAN TRT 314 HS machine we have for sale. Contact us for more information. Lhedpfx Aexpypzob Ujn Application Types Milling

Condition: ready for operation (used), empty load weight: 1,800 kg, total length: 1,200 mm, total height: 1,500 mm, 300 x 300 mm force: 45 ton Capacity: 10 mm Strokes/min: 45 str/min Fixed angle -- variable angle: fixed Workspace: 1200 x 770 mm Electric motor (power): 10 hp Depht: 1500 mm Ljdpfxexpymgo Ab Ushn

Condition: excellent (used), functionality: fully functional, Machine type: Universal rotary/tilting/swiveling table with dividing head Manufacturer: Hermle, Deckel, Mikron Condition: very good Type of offer: used machine component Technical data: Note: Size: 670 x 395 mm Mounting size: 480 x 220 mm Lhjdpfsxpwbusx Ab Uon #### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE #### The component is in very good and immediately ready-for-use condition and can be inspected at our facility. We would be pleased if our offer is of interest to you. Subject to errors, changes, and intermediate sale.

Condition: used, Nicholson A5/35” immediately available. Log diameter: 8-90 cm. Lhsdpfjxpvxxjx Ab Uen

Condition: used, functionality: fully functional, fuel type: gas, Year of construction: 2012, machine/vehicle number: 47101183, Once connected to power and gas cylinder, the mobile gas heaters are quickly ready for use. The ideal units for construction tradespeople: compact and transportable in any passenger car. The gas heaters can be operated continuously between 14 and 96 kW without heat loss. Multi-cylinder systems are available for simultaneous connection to several gas cylinders. Lhedpfx Asxpvgvjb Ujn

Year of construction: 2015, condition: used, Power: 85 kW (116 HP) Auction item. Automatic PP blow molding machine was in working condition. Not used for 3 years. Was used to make plastic cups for candles. May need minor repair. Sold together with a high-pressure compressor/booster and a container for feeding blanks. Lhsdsxpq Rvspfx Ab Usn

Year of construction: 2021, condition: used, Empty weight: 525 kg Lhodexpq Rcjpfx Ab Usn Auction item. Vacuum blasting machine in working condition. Sold as seen in pictures.

Condition: ready for operation (used), load capacity: 550 kg, nominal power: 69 kW (93.81 HP), Hindenlang TPEVA - 550 - Induction oven Kind of: volume melt bath: 900 x 750 mm Max temperature: 850° Ledpexpkhnsfx Ab Uehn Voltage: 400 V / 100 A

Condition: ready for operation (used), empty load weight: 1,350 kg, total length: 1,960 mm, total width: 1,170 mm, total height: 1,070 mm, additional equipment features: CNC full automatic, Full automatic circular saw Automatic CNC positioning of sawblade = automatic turntable, up to 180° left and right Equipped with: 1 - workpiece storage unit (green) + auto rollerconveyor, length 7 meter 2 - auto feed-in by pulling workpiece to sawblade, max single movement of 2000 mm - repositioning is possible for longer lengths 3 - auto feed-out of cut workpiece, max movement of 1000 mm 4 - unloading table with chains Automatic zero point recognition Automatic programmed controlled processing of cutting sequences Storing of programs with different sawing tasks Dia saw / abrasive - disk: max 425 mm Turningspeeds: 6 > 30m/min Lhodpfxsxpki Ee Ab Ujn Power needed / motorpower: 5,5 kW

Condition: ready for operation (used), nominal power: 65 kW (88.38 HP), Met gas verwarmd Lhedpfx Absxpgdfj Uen Max temperature: 250 °C Capacity: 2650 x 2400 x 1950 mm Voltage: 400V

Condition: ready for operation (used), H&C Fours 700°C 1000 x 1100 x 1000 mm Max temperature: 700°C Power needed: 42 kW - 95A Lhjdpfxjxpgdle Ab Usn Voltage: 400V 3 phase

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Lhodpfx Aexpggyeb Uen Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg

Condition: ready for operation (used), LVD 200 x 6 mm (variable) Capacity: 200 x 6 mm Fixed angle -- variable angle: variabel Lhedpfx Abexpghkj Usn Driven: hydr.

Condition: ready for operation (used), power: 2 kW (2.72 HP), empty load weight: 550 kg, total length: 800 mm, total height: 1,200 mm, Haco 220 x 4 mm (fixed) Lsdpfxoxpghwj Ab Uehn Capacity: 220 x 4 mm Strokes/min: 35 Fixed angle -- variable angle: fixed: 90° Driven: hydraulic Workspace: 650 x 650 mm Work height: 890 mm Depht: 660 mm

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 22359, Equipment: UVV, Compact design allows storage and transport in the smallest of spaces. The ideal solution when large amounts of light are temporarily needed. Suitable for all types of lighting applications, such as construction sites, roadworks, events, film and photography, or securing hazardous areas. The light balloon can be mounted on work machines and thus ideally illuminates the operating area of the equipment. Energy-saving LED technology with high light output. Lodjxn S Duepfx Ab Uohn

Condition: new, functionality: fully functional, gearing type: automatic, color: orange, empty load weight: 7,650 kg, Year of construction: 2024, machine/vehicle number: 162923240, Equipment: AdBlue, The machine is designed for pumping concrete in construction and installation works, foundations and pilot activities as well as tunnel construction. Maximum speed 2300rpm, Engine TDC 6.1 L, diesel Stage V. Weight 7650kg. Date of manufacture 2024. Ledpoxn Nlcjfx Ab Uohn Chain undercarriage, maximum speed 2.6km per hour. Maximum hydraulic pressure 320 bar Cylinders 125/80mm*1400mm Maximum concrete flow rate 102 cubic meters per hour

Condition: new, With this offer, you are purchasing a new ‘Apodis Airguard 1000’ air purifier. Item for sale: Lsdsxn Hy Djpfx Ab Uehn 1 x Apodis Air Guard with the following specifications: As an experienced medical technology company specialising in filter systems, it was only natural for us to offer this quality for the home, waiting room or office. With the AIR GUARD 1000, we have succeeded in developing a product that is perfect for smaller rooms while maintaining the same professional quality. Whether due to the current situation, the next flu season or for allergy sufferers, the AIR GUARD filters harmful aerosols, viruses, bacteria, pollen and dust from the air before it is returned to the room. Condition: This offer is for a new device. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Year of construction: 2018, condition: ready for operation (used), This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information. Ledpfx Aboxn Dmns Uohn Application Types Other Sheet Metal Machinery