SIA Rojas Siltums

Condition: ready for operation (used), Year of construction: 1999, operating hours: 133,000 h, functionality: fully functional, rotational speed (min.): 750 rpm, rotational speed (max.): 750 rpm, input frequency: 50 Hz, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, Available complete natural gas power plant with Wartsila 18V34SG engine. The engine was running at full load with all maintenance performed. The fans for the cooling system are not included, only the heat exchangers. Brand: Wartsila Fpjdpfxoytq Tyj Aa Ejd Model: 18V34SG Generator brand: ABB Power: 5980kW Fuel: Natural Gas Year of manufacture: 12/1999 RPM: 750 Operating hours: 133,000 hours We can offer 2 more units.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 70,606 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, GAS GENERATOR PLANT – CATERPILLAR 3516 (Complete Package) Complete natural gas power generation package, supplied with main auxiliaries and systems. The unit was operating at full load without issues before shutdown. All maintenance performed by authorized service providers, strictly following the manufacturer’s recommended maintenance schedule. Preventive maintenance carried out immediately prior to shutdown (2022): - Inspection/checking of key engine parameters - Bearing lubrication - Oil replacement - Filter changes (oil and air) - Spark plug replacement - Borescope inspection: documentation available Technical specifications: - Electrical output: 1,030 kW - Total operating hours (since new): 70,606 h - Year of manufacture: 1999 - Fuel: Natural gas Scope of supply (included): - Complete genset - Gas train - Control panel Fsdpfxeytq Eis Aa Ejpd - Circuit breaker (alternator + transformer) - Heat exchanger - Silencer - Cooling system (HT aerofan and LT cooling tower) - Lubrication system Availability: Immediately The equipment has already been dismantled and is stored in our warehouse, ready for loading or inspection.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 72,318 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR – MWM TBG 620 V16 K (Complete Package) Available MWM TBG 620 V16 K natural gas generator set, offered as a complete package with auxiliaries. The unit has 72,318 running hours from new and was shut down in 2022 while operating at full load. Maintenance All maintenance has been carried out by official service, following the manufacturer’s scheduled maintenance plan. Technical data • Brand / Model: MWM – TBG 620 V16 K Fpsdpfx Asytq A Uoa Ejd • Electrical output: 1,364 kW • RPM: 1,500 rpm • Frequency: 50 Hz • Year of manufacture (YOM): 2004 • Total running hours (since new): 72,318 h • Fuel: Natural Gas • Generator brand: Marelli Generators • Voltage: 400 V Scope of supply (included) • MWM genset • Control cabinet • Auxiliary control cabinets • Gas ramp • Cooling system • Protection switchgear • Silencer • 3-Way Valve • Documents Status / Availability Availability: Immediate For more information please contact us!

Condition: new, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, NEW GENERATORS – 2× MWM TCG 2020 V12 (Complete Package) Complete power plant consisting of two (2) new generator sets based on MWM TCG 2020 V12 engines and auxiliaries (2018), never installed and kept in excellent condition. Condition: New / Unused (never installed – original packaging) Working hours: 0 h Fuel: Natural Gas Maintenance / Inspection As new units, never commissioned. Borescope report: available. Technical data (per unit) • Engine brand / model: MWM – TCG 2020 V12 • Electrical output: 1,000 kW • Year of manufacture (YOM): 2018 • RPM: 1,500 rpm • Frequency: 50 Hz • Generator brand: Marelli Motori • Voltage: 400 V Scope of supply (included) • 2× complete gensets (MWM TCG 2020 V12) • Control panels • Radiators • Gas train • Silencer • Switch breaker • Coolers • 3-way valves • Boilers Fsdpfx Aajytpdks Espd Status / Availability Availability: Immediate. All assets are ready to be loaded. For more information please contact us!

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: Fpedpfoytpbiex Aa Esd - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): - Jenbacher genset - Auxiliary control cabinets Fsdpfx Asytg Rbja Espd - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: ready for operation (used), Year of construction: 2018, operating hours: 19,681 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, overall weight: 23,000 kg, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER 620 GS-NL (Complete Package) Available complete natural gas power plant based on Jenbacher 620 GS-NL, already dismantled and ready for loading. The unit was stopped while running properly at full load. Maintenance All maintenance has been performed by official services, following the manufacturer’s schedule. Premium shortblock: completed in 2018 (report available). Skid / generating set components: 2008. Borescope inspection: available. Technical data Brand: Jenbacher Model: 620 GS-NL Power: 3,044 kW Fuel: Natural Gas Frequency: 50 Hz Total running hours: 19,681 h Voltage: 6,300 V Scope of supply (included) Genset Gas train “Diane Blue” Silencer Oil system Refrigeration system Transformer Switch breakers Auxiliaries cabinet Status / Availability Availability: Immediate The assets are already dismantled in our warehouse, ready to be loaded or inspected. Fedpfx Aaoytgxfo Eepd For more information please contact us!

Condition: used, Year of construction: 2016, operating hours: 55,000 h, functionality: fully functional, power: 1,200 kW (1,631.54 HP), temperature: 110 °C, nominal heat output: 1,200 kW (1,631.54 HP), Equipment: documentation/manual, hot water, type plate available, Used, fully functional heating system for sale. Operation has ceased, the system will be dismantled. More details by email or phone. Fpjdpfx Ajyr Aikea Eed

Condition: used, Year of construction: 2011, operating hours: 32,500 h, functionality: fully functional, power: 140 kW (190.35 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, overall weight: 3,500 kg, temperature: 25 °C, We are offering this used MAN E2876 combined heat and power unit, year of manufacture 2011. Year: 2011 Model: E2876 E312 Engine number: 298 3025 272 3007 Serial number: 3007 Factory number: 5019615 Job number: Power output: 150 kW Fodpoylmbqofx Aa Eopd Speed: 1,500 rpm Temperature: 25 °C Installation altitude: 100 m If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Fpsdjydqlqspfx Aa Ejd Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Fpjdpfsycl Absx Aa Eod Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: used, Year of construction: 2015, operating hours: 82,000 h, functionality: fully functional, type of input current: AC, power: 220 kW (299.12 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, empty load weight: 12,500 kg, For sale: Biogas CHP unit (BHKW) Fully functional CHP unit in container (dimensions: LxWxH = 7x3x3 meters, excluding the rooftop fan, weight: 12.5 tons) The unit will be decommissioned once the two new CHP units are operational, approximately summer 2026. The CHP was operated under a service contract with IWK. The last major overhaul (turbo, pistons, liners, heads, catalyst) was carried out in May 2025 at 77,500 operating hours. Service is performed every 2,000 hours. The unit can be inspected on site and in operation. The CHP is sold as-is, without warranty, ex location. Fjdpox A A Sfjfx Aa Espd Transport costs to be borne by the buyer.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 55 kW (74.78 HP), rotational speed (max.): 1,500 rpm, For sale: engine for cogeneration with generator. Fjdpfx Aajxuvams Eepd

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, A Spanner RE2 Facelift wood gasifier in good condition is for sale. The unit can be inspected in Brixen / South Tyrol. Fpjdpoxuqpvefx Aa Esd

Condition: excellent (used), Year of construction: 2014, operating hours: 31,347 h, functionality: fully functional, power: 800 kW (1,087.70 HP), Equipment: documentation/manual, MWM CHP plant for decentralized electricity and heat generation in electrically controlled, grid-connected operation Controllability 50-100% Technical specifications: Electrical output in kW (electrical): 800 Efficiency: Electrical: 42.3% Thermal: 45.5% Total: 87.3% Emission values: NOx 500 mg/Nm³ Fsdexfgxbjpfx Aa Eepd

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Fpodpfx Ajxc Ni Roa Esd

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Technical details: Manufacturer: MTU Engine: MTU 12V4000L62 Generator: Stamford Year of manufacture: 2008 (completely overhauled in 2015) Operating hours: 63,000 Including control cabinets Fsdpfx Ajxcwlaja Espd Including dry cooler

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Fodpfxowd Nw Tj Aa Espd Contact for more info and pictures.

Condition: excellent (used), Year of construction: 2020, operating hours: 5,065 h, functionality: fully functional, power: 901 kW (1,225.02 HP), total height: 2,990 mm, total length: 12,000 mm, total width: 2,990 mm, fuel: domestic gas H, Equipment: documentation/manual, For sale is a natural gas combined heat and power (CHP) plant in containerized design and a chimney with 3 flues: Short description: CONTAINER CHP 901 kWe / 928 kWth Natural gas engine: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Further information: Fpodpovuz Utsfx Aa Ejd - Complete CHP package in a container (12x3x3 m), super silent, color RAL7004, including mixture cooling and emergency cooling as a table cooler, outdoor glycol protection system, oxidation catalyst (Oxikat), provision for SCR system, island operation capability, Profibus DP interface, etc. - Supplied as per technical drawings, documents, P&ID diagrams, and data sheets. - Genset has completed 5,056 operating hours (operating period: 01/2021 - 12/2021). - The entire CHP plant is in excellent condition, the genset was regularly serviced under a premium service contract, and is currently under the manufacturer’s care.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, input voltage: 400 V, rotational speed (min.): 1,500 rpm, warranty duration: 12 months, nominal power: 1,000 kW (1,359.62 HP), input frequency: 50 Hz, continuous power: 1,000 kW (1,359.62 HP), Gas generator or cogeneration 1000kW. 40ft container including cooling system. Engine MWM TCG 3016V16S, Generator LSA, MCB - ABB or Schneider, gas line Dungs, control system ComAp or Deiff. Delivery 30-90 days. Fpodpfx Aasvta A He Ejd

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) Fpsdevnri Ijpfx Aa Eod 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, 1 combined heat and power unit for natural gas (convertible to other gas types) Output: 800 KW electrical 800 KW thermal Manufacturer: G2 Engine: MWM, type TCG2016 V16C Operating hours: 42 000 Year of construction: 2014 Fpedevgbdropfx Aa Eed Complete system in container (12 x 4.5 m) with all heat exchangers, switch cabinets, power supply All maintenance intervals carried out by the manufacturer. Ready for immediate use! Further details on request

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Year - 2015-2017 Fedpfx Ajvcbtrsa Eopd Nominal power - 6x45KW, 3X50KW Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Please see attached documents. Preferred text communication via e-mail or whatsapp.

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each Fsdpfx Aou Nxatsa Ejpd - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Fpjdpfxjtwqzrs Aa Esd