DREHERtec GmbH

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel in X-axis: 271 mm Hodpfxozdd Npe Agmonn Travel in Y-axis: 600 mm Spindle bore: 62 mm Maximum spindle speed: 3,500 rpm MACHINE DETAILS Control system manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Net weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis Note: The parameters are stored, but are lost if the power supply is interrupted. As long as the power supply is maintained, this is not a problem.

Condition: used, L + Z Lathe PRÄWEMA Machine No. 903 Year of manufacture 1968 Center distance 1000 mm Turning diameter over bed 400 mm Turning diameter over cross slide 240 mm Center height over bed 200 mm Center height over cross slide 120 mm Spindle bore 36 mm Feed longitudinal and transverse Chuck mounting Short taper DIN 55027 Size 6, 4x M12 Tailstock internal taper MK 4 Tailstock quill travel 120 mm Spindle speed 25 - 3000 rpm, 18 steps Drive power 4 kW Mains connection 380 Volt, 50 Hz Hnedpfxezc Nt Re Agmjn - Spindle speed via 18 gear stages - 3-jaw chuck RÖHM Ø 250 with a set of stepped jaws - Swiveling universal tool holder - Emergency stop button - Change gears Space requirement L x W x H 2100 x 850 x 1350 mm Weight 1260 kg

Condition: not inspected (used), Year of construction: 2022, machine/vehicle number: ML0390-000447, turning length: 303 mm, turning diameter: 320 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, total height: 1,700 mm, total length: 2,000 mm, total width: 1,800 mm, workpiece weight (max.): 2,600 kg, Parts collector, chip conveyor, manual tailstock with fixed centering point MT4, transformer. Hnjdpfezc Hw Tex Agmsn

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC-Steuerung Control: FANUC 18i-TB Hjdpfx Agjzc Dy Eemenn Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 460 mm, turning length: 610 mm, turning diameter: 380 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 680 mm, spindle motor power: 18,500 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,095 mm, total length: 3,425 mm, total width: 1,920 mm, overall weight: 6,000 kg, Compact, linear-guided horizontal CNC turning center with 6 axes. Control system: Fanuc F0TF+ Hodpfx Agszcpdcemjnn Accessories: Chip conveyor, articulated belt type Combi500, manufactured by Cromar Main spindle chuck TopPlus Mini Axfix80, manufactured by Hainbuch Tool magazine with 12 tool positions (BMT55P)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Traub CNC turning machine TND360, TX8, year of manufacture 1982, serial number >600. Includes 1 turret, tailstock, chip conveyor, draw tube, and 3-jaw chuck KNCS250. Hsdpfozcdnvex Agmjnn The images show the machine in its production environment. The machine can be inspected while powered on.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm Hnjdpfxozb Ipzo Agmen 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo 2-Axis X,Z Turning Center Hodpfx Aozb Ik Sjgmenn CE Certified Puma 250B Model Fanuc CNC Control Year 1998 Sold as a Complete Unit Chip Conveyor Documentation Included Reference: A044

Condition: excellent (used), Year of construction: 2012, CNC lathe, 3-axis, MAZAK QT SMART 200M Year of manufacture: 2012 Condition: very good Max. machining diameter: 360 mm Max. machining length: 532 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm - CNC control: Mazatrol Smart - 3-jaw chuck: KITAGAWA BB-208, diameter 210 mm - Tool Eye - C-axis - Interface for bar feeder - NC tailstock - Chip conveyor, side discharge, Mayfran - 4 driven tool holders, 2/2 - 8 standard tool holders Machine in very good condition Hnedpfx Agozbrmqsmsn

Condition: excellent (used), Year of construction: 2006, CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Hjdjzblhnjpfx Agmsnn Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition

Condition: used, Year of construction: 2007, functionality: fully functional, CN ROSILIO TBI 280 TURRET LATHE Machining Capabilities • Swing over bed: 280 mm • Maximum machining diameter: 220 to 250 mm, depending on the version • Maximum machining length (Z-axis): 350 mm • X-axis travel: 145 mm (including 20 mm below zero) Spindle • Maximum speed: 6000 rpm • Spindle nose: A2 5 • Motor power: 5.5 / 7.5 kW • Spindle bore: 42 mm • Chuck: hydraulic Turret • 8-position VDI 30 intelligent turret • Coolant supply to each position Available CNC Controls • Siemens 802D SL General Data • Rapid traverse rates: o X-axis: 10 to 15 m/min o Z-axis: 20 to 30 m/min Hnjdpozbidtofx Agmjn Tailstock: o CM4, sleeve Ø70 mm, travel 65 mm, total travel 400 mm Footprint: 2000 × 1450 × 1800 mm Weight: 2200 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, CNC Control: Fanuc Series 18i-T X-axis travel mm: 242 Y-axis travel mm: - Z-axis travel mm: 1,300 Capacity / swing mm: 570 Max. length mm: 1,280 Max. turning diameter: 350 Bar capacity mm: 90 Spindle speed rpm: 3,500 Spindle power kW: 22 Nose / taper: A2-8 Chuck / table: 10 inches Turret / tool changer: 12 stations / live tools Series: 30LM0121 Manufactured in: Korea EQUIPMENT: Powered tools Hnedpfezawvujx Agmjn Fixed tool holders Steady rest: Included Self-centering chuck: Included Electrical cabinet: Included Manuals

Condition: ready for operation (used), Year of construction: 2000, Make: DAEWOO Type of machine: Puma 230 Year of manufacture: 2000 Control system: Fanuc 18-T Machine's weight: 4.500 kg Speed range: 4.500 U/min Cutting diameter: 350 mm Turning length: 500 mm Overall dimensions: 3,0 x 1,8 x 1,9 m Tool turret - slots: 12 Pl. Hjdezawa Hspfx Agmenn Spindle opening: 65 mm

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, turning length: 2,200 mm, turning diameter: 630 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 2,330 mm, bar passage: 117 mm, Specifications Chuck diam. 450 mm 11′ Capacity Turning length: 2255 mm 1st Spindle Spindle nose: A2-11 ASA Bar capacity: 117 mm Spindle speed: 10-2000 rpm Motor power: 30/37 Kw C axis: si degrees 1st Turret Motorized turret: 12 Tailstock Cone: 5 CM Maximum swing over bed: 775 mm Maximum turning diameter over carriage: 630 mm Maximum turning diameter over bed: 690 mm SPINDLE Spindle bore diameter: 132 mm Draw tube internal diameter: 117 mm Main spindle motor power: 30/37 kW Number of mechanical speed ranges: 2 Maximum spindle motor torque (continuous / 30 min): 1980 / 2450 Nm CARRIAGE Hnedpjy Uk Eaefx Agmon X-axis travel: 350 mm Z-axis travel: 2330 mm X/Z axis motor power: 7/7 kW Carriage guide inclination: 45° TAILSTOCK Tailstock travel with carriage coupling: 2255 mm Quill diameter: 160 mm Quill travel: 150 mm Maximum quill thrust: 2851 kg Machine dimensions: 6521 × 2154 × 2374 mm

Condition: good (used), Storage location: 3105 Manufacturer: DOOSAN Type: S310 S Machine number: LNJ 1003 Year of manufacture: 1998 Maximum turning diameter: 750 mm Maximum workpiece diameter: mm Turning diameter over bed: 350 mm Travel distances x-z: mm Bar capacity: 65 mm Hnedpoy T Uyxjfx Agmsn Control system: Fanuc O-T Spindle speed range: 4,500 rpm Turret: 12 stations Number of spindles: 2 Equipment: Chip conveyor Power consumption: 4 kW Dimensions: mm Weight: 3.8 t Condition: good

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 950 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 950 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, workpiece weight (max.): 900 kg, turning diameter over top slide: 400 mm, bar passage: 54 mm, chuck outer diameter: 250 mm, swing diameter over top slide: 400 mm, center height over cross slide: 200 mm, Turning lathe WEILER E35 Year of manufacture: 2001 Control system: Weiler D1 Spindle speed: 1 - 3,000 rpm Chuck diameter: max. 250mm Bar capacity: 54mm Center height: 200mm Distance between centers: 950mm Accessories: Coolant system Various tool holders Hodpsy T Iptjfx Agmonn Chuck jaws The machine was used in a training workshop.

Condition: excellent (used), CNC lathe Hwacheon HI Tech 300 Year 2005 Fanuc 18iTB with Manual Guide 10-inch chuck Spindle bore 79mm Max turning length 800mm Max diameter 380mm Z-axis travel 820 Tailstock Hnedpfey Tp E Nsx Agmjn Chip conveyor Machine documentation Very good condition

Condition: good (used), Year of construction: 2005, 1 CNC lathe with dual spindles and dual turrets, model MW120 from MURATEC, manufactured in 2005, including: 1 Integrated manipulator. Hnsdpfx Agsy Ta Dvemon

Condition: excellent (used), Year of construction: 1998, CAZENEUVE CT 200 CNC lathe CNC NUM control Hnjdpfx Aoy S T N Ajgmsn Year 1998

Condition: excellent (used), ROSILIO TBI 280 CNC Lathe Numerical control: FAGOR 8055TC-A Year: 2006 Power supply: 400 V Installed power: 15 kVA Hsdpfxjy S Axyo Agmonn Weight: 2200 kg Machine in good overall condition.

Condition: excellent (used), Year of construction: 2001, DAEWOO PUMA V550M-2S CNC LATHE Brand: Daewoo Model: Puma V550M-2S Type: Vertical CNC Lathe Hsdpfx Agey S Annomsnn Numerical Control: FANUC Series 18-T FEATURES: – Large chuck – Power supply: 200/220V – 3-phase – 50/60Hz – Installed power: 103.8 kVA – Complete machine

Condition: used, Year of construction: 2007, turning length: 530 mm, turning diameter: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, 2-axis CNC lathe Mori Seiki 2050 Dura Turn, Japan Fanuc control! Chuck size: 200 mm / 8 inches Maximum turning diameter: 360 mm Maximum cutting length: 530 mm Hodpfx Aey Stfdsgmonn Bore diameter: 65 mm Spindle power/Maximum spindle speed: 13.5 kW/4000 rpm / 18.1 HP/4000 rpm Spindle type: A2-6 Turret – Number of tools: 12 stations X-axis and speed: 24,000 mm/min / 945 inches/min Z-axis feed rate: 24,000 mm/min / 954 inches/min Included with the machine: -Tailstock -Probe -Part catcher -Chip conveyor -Transformer -Documentation Machine weight: 3950 kg

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg Hnedpfxsy Sblro Agmon

Condition: used, Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 579 mm, turning length: 510 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15 W, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 30,000 m/min, Used CNC lathe Mori Seiki NL2000Y-500, year 2007, equipped with CNC control Mori Seiki MSX-850III. The machine is complete with Y-axis, interpolated C-axis, 12-position live turret, and tailstock. Main features: • Max turning diameter: Ø 356 mm • Max turning length: 510 mm • Bar capacity: Ø 65 mm • Axis travels X/Y/Z: 260 / +/-50 / 590 mm • Spindle speed: 5,000 rpm • Live tool speed: 6,000 rpm • Spindle power: 11/15 kW • Spindle ASA-A2-6 • Minimum C-axis angle: 0.001° Hedpfx Agoy R D Aqjmjnn Machine equipped with: • Chip conveyor • Coolant tank with pumps • Nr. 4 live tool holders (2 radial + 2 axial) • Various fixed tool holders • Automatic tool presetting arm • Manuals, electrical schematics, and CE/EU Declaration

Condition: used, Year of construction: 2023, turning diameter 120 mm Hjdpjy Nfdmefx Agmjnn turning length 640 mm control Fanuc 32iT total power requirement 45 kW weight of the machine ca. 8,5 t