NG green innovations GmbH

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Dcedpfx Apozr T Dkjiek Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Year of construction: 2022, condition: used, functionality: unexamined, For sale is a package of six Cavitec system modules for processing web-shaped materials: Dsdpfxszr Hh No Apiock two identical laminating/pressing calenders, two stationary winding stations, and two mobile winding stations. The modules come from a coating or laminating environment for technical textiles, nonwovens, films, or membranes. Position 1: 1 × Cavitec laminating unit / laminating calender Position 2: 1 × Cavitec delaminating unit / identical pressing calender Position 3–4: 2 × stationary Cavitec winding stations; suitability for use as unwinder or rewinder for technical materials to be determined Position 5: 1 × mobile unwinder Position 6: 1 × mobile rewinder Proof of origin: Purchase contract from 2022 with historical photo documentation available. Preferably sold as a complete package; partial sale by agreement. Sale basis: Used, as inspected; dismantling, loading, and transport by agreement. The system is located in 06502 Thale.

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Dcsdpfxjzrvh Ej Apiok Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Power: 195 kW Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us.

Year of construction: 2019, condition: good (used), Venjakob RNV 2.0 Exhaust Air Purification System The system incinerates gaseous pollutants and odors from production exhaust air in order to release clean air into the environment. Extraction: Process air containing solvents or odors (e.g., from painting facilities, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to extremely high temperatures. Combustion (Oxidation): In the combustion chamber, the natural gas feed (the support burner) ignites the air. At temperatures of up to 850°C, organic pollutants (VOCs) decompose completely into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy recovery: The cleaned, hot air subsequently flows through a second ceramic bed, releasing its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as very little additional gas firing is required after the start-up phase. System specifications Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of manufacture: 2019 Serial number: 15212 Throughput volume: 2,000 Nm³/h Gas & Combustion Gas type / Calorific value: Natural gas H / 10.4 kWh/Nm³ Firing heat output range: 30 kW Dcsdpjzrl Ibjfx Apiok Flow pressure: 200 – 1,500 daPa Max. combustion chamber temperature: 850°C Electrical connections Mains connection: 400 / 230 V AC Connected load: 24 kVA Current draw: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. These are two single-station forming systems from the premium manufacturer FRIMO. They were used in the automotive sector and were in production until recently. Dodozrg I Aspfx Apiock The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total width: 4,600 mm, total length: 9,100 mm, total height: 3,000 mm, overall weight: 40,500 kg, Double-production solar panel laminating machine This laminator is used to produce solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under pressure and temperature. The lamination process is carried out under vacuum, preventing the inclusion of undesirable entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. Dcjdpezrdhgofx Apijk The machine comes with many spare parts and can be viewed in operation.

Condition: used, Robust cross-conveyor for round timber For sale is an extremely robust cross-conveyor for logs, taken from a professional sawmill operation. Features: Heavy-duty industrial design Double chain conveyor Short conveying distance Fast and reliable transport of round timber to the log carriage Solid and durable steel construction Dcodpfx Aszq T Adspisk Immediately available The system is in good, functional condition and can be inspected under power by appointment. Please submit a fair and realistic offer.

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new SOLAR PHOTOVOLTAIC (PV) PANEL/MODULE PRODUCTION LINE, year of construction 2023. Djdpfx Apeznmhhjisck A solar panel manufacturing facility for sale capable of processing both PERC and TOPCon solar cells and producing a wide range of popular PV modules currently demanded in the market. The fully automated production line has an annual capacity of 250 MW and can manufacture various module configurations, including 450W, 585W, and 630W class modules with TOPCon 16BB technology, available in black frame with black backsheet, glass-to-glass, white backsheet, and transparent backsheet options. The facility is also capable of producing 10BB PERC modules up to 550W. Equipped with a double-layer double-chamber laminator, automatic framing system, automatic sorting system, and fully integrated high-efficiency manufacturing processes, this turnkey production line offers flexible production capabilities for today’s leading solar panel designs. With a highly competitive price, this is a rare investment opportunity for serious buyers seeking to enter or expand in the solar PV manufacturing industry. Popular panel types like 550 W PERC , 585 W TOPCON Glass to Glass ; 630 W TOPCON Glass to Glass can be produced with this line. Manufacturer: ARGUS SUNIC Model: 2023 Year of manufacture: 2023 Condition: as new Category ID: 33 Machine type: SOLAR (PV) PANEL PRODUCTION LINE Production capability: Complete photovoltaic (PV) module manufacturing line covering the entire production process from cell stringing to final testing and sorting Supported solar cell types: 182 × 182 mm 10BB PERC (M10); 210 × 210 mm 12BB PERC (M12); 182 × 182 mm 16BB TOPCon (M10); 182 × 210 mm 16BB TOPCon (G12R) Layout: Existing layout is shown in the photos Includes Tabber & Stringer Includes Automatic Robot Layup System Includes Automatic Glass Feeding & Transfer System Includes EVA Cutting & Layup Machines Includes TPT/Backsheet Cutting & Layup Machine Includes Automatic Bussing Station Includes Automatic Taping Station Includes Automatic Double Glass Feeding & Die Spotting Machine Includes Automatic Double-Chamber Laminator Includes Automatic Frame Gluing & Framing Machine (3-in-1) Includes Automatic Edge Banding Machine Includes Automatic Edge Trimming Machine Includes Junction Box Glue Filling Machine Includes Junction Box Gluing Machine Includes EL Inspection System Includes IV Module Tester (A+A+A+ Class) Includes Hi-Pot Tester Includes Automatic Module Sorting Machine Includes Automatic Laser Scribing Machine Includes Solar Cell Tester Includes Automatic Corner Grinding Machine Includes Automatic Corner Wrapping Machine Includes Automatic Module Loading & Unloading System Includes Plate Chain Curing Conveyor Includes Glass Stacking Machine Includes Visual Inspection Stations Includes Flip Inspection Table Includes Conveyor Systems (Transverse & Longitudinal) Includes Buffer Stations Includes Rotary Units Includes Corner Turning Units Includes Barcode Printing System Includes Control Cabinets Includes Material Handling Trolleys & Auxiliary Equipment If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Year of construction: 2014 (New, never used) Power: 30 kW Dsdozm Srcspfx Apieck (see photo for more technical details)

Year of construction: 2021, operating hours: 5,297 h, condition: used, functionality: fully functional, machine/vehicle number: 200/751/15-21/6HE-35-40P/450, Complete drying system, consisting of 1 dehumidification module, Harter Airgenex 20,000, and 2 drying cabinets, TS 1800-5, each with 5 pull-out compartments with vacuum suction devices, insulated air ducts, and an additional recirculation fan. The system is designed for drying XPS panels coated with mortar and fiberglass mesh without warping. Year of manufacture of the system: 2021. The drying cabinets are very robustly manufactured by Sondermaschinenbau Bannik. The system is also sold as individual components, and inspections are possible. Price negotiable. Dcodpfx Apjzmw Hleisk

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate usable area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €9,500 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine. Currently in operation at our facilities and available for demonstration before disassembly. The machine is being sold solely due to technological upgrades, following the incorporation of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and is delivered with a computer included, fully configured to start working from day one. Its large usable work area of approximately 2,600 × 1,600 mm allows for the machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foam, rubber, and other non-metallic materials with complete ease. The machine incorporates a fully operational 150 W RECI laser tube, and also includes a brand-new, second 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Equipment included The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate usable area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • 150 W RECI laser tube, installed and operational. • Brand-new, spare 150 W RECI laser tube. • Complete, new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable chain. • Various additional spare parts. Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before disassembly. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment that is ready to continue producing from day one. More than just a used machine Dodozmqa Eepfx Apisck It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001, Equipment: CE marking, DEKCEL 150 W Industrial CO₂ Laser – Usable Area: 2,650 x 1,450 mm – Complete equipment, ready for production Price: €9,300 + VAT For sale: a DEKCEL 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF laser equipment. Equipped with a Ruida DSP industrial controller, RDWorks software, and an included computer, all completely configured for immediate operation. Djdpfxjzmqaxj Apisck It features a large usable working area of 2,650 x 1,450 mm, ideal for machining complete MDF, HDF, plywood, acrylic, cardboard, leather, foam, rubber, and other non-metallic sheets. The machine incorporates a fully operational 150 W RECI laser tube and, in addition, is delivered with a second, brand new 150 W RECI laser tube, providing the buyer with significant savings on future maintenance costs. The price includes: • DEKCEL 150 W industrial laser machine. • Usable working area: 2,650 x 1,450 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • CW-5200 industrial chiller. • Installed and functioning RECI 150 W laser tube. • New, spare RECI 150 W laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. The machine can be seen in operation before dismantling, allowing you to verify its functionality, precision, and cutting quality. An excellent opportunity to acquire a large-format industrial machine, fully operational and with a significant number of accessories and spare parts included, ready to continue production from day one. _____ This is more than just a used machine; it is delivered as a complete industrial unit with strategic spare parts included, which minimizes maintenance costs and ensures a quick start-up.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 9 kg, power: 1,200 kW (1,631.54 HP), smoke pipe connection diameter: 800 mm, nominal heat output: 1,200 kW (1,631.54 HP), space requirement length: 2,500 mm, space requirement height: 22,000 mm, space requirement width: 2,500 mm, Chimney/flue of a former 1200 kW biomass boiler available for sale. Stainless steel pipes are installed. 1 passage DN800 1 passage DN400 Dcjdpfx Apjzmny Njiek complete with an external walkway as shown in the pictures. Height: 22 m Assistance will be provided during dismantling. Available immediately.

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 218224, Abrasion testing machine from ABREX. The machine is new and was purchased a few years ago. Operating hours: 0 hours, as we no longer have any use for this machine. Delivery conditions: Self-collection in Königsbach-Stein. Dcsdpfxszlz Rrs Apisk

Condition: good (used), Year of construction: 2009, machine/vehicle number: 09X114, PERTICI Sawing center for plastic profiles, model Scarabeo SC 55. Without dust extraction system. Dcsdpezlym Eofx Apiek

Condition: used, Selling a used gas/water heat exchanger. Ideal for cooling wood gas or other gases. Made entirely of stainless steel. Dcedpfjzlhfcsx Apiek

Year of construction: 2007, condition: used, functionality: fully functional, DANTHERM NFZ 3000 (Year 2007) Reliable and high-capacity dust extraction (air filtration) unit for sale, suitable for woodworking, furniture manufacturing, and other industrial applications. Technical Specifications: Filter area: approx. 150 m² Model: NFZ 3000 Year of manufacture: 2007 Collection bags: 6 pcs. Fans: 3 pcs. (3 sections) Airflow capacity: approx. 9,000 m³/h Inlet connection: Ø 630 mm Dimensions: Length: 3,600 mm Width: 2,400 mm (+ approx. 1,000 mm fan overhang) Height: 5,400 mm The unit is designed for efficient collection of dust and wood shavings and is suitable for a wide range of industrial production facilities. It features a robust construction and is easy to maintain. Dodpfozlgm Eex Apisck Condition: Used (fully operational) Price: Negotiable

Year of construction: 2021, condition: excellent (used), 2021 Versa Tech Enterprise Soundproof Welding Room/Acoustic Welding Enclosure Consisting of: 1. 1st Enclosure 3 Twin Door Soundproof Welding/Assembly Booths Dimensions (2) W3,000 x D4,000 x H2,700mm & W4,000 x D4,000 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 2. 2nd Enclosure 2 Assembly Soundproof Booths Dimensions W4,800 x D4,000 x H2,700mm & W2,800 x D4,000 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. Dcsdozk Dw Espfx Apisk 3. 3rd Enclosure 2 Soundproof Welding/Assembly Booths Dimensions W2,500 x D2,500 x H2,700mm & W4,200 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 4. 4th Enclosure 3 Twin Door Soundproof Welding Booths Dimensions (2) W2,000 x D2,500 x H2,700mm & W3,000 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,319 x D1,284mm. 5. 5th Enclosure 6 Twin Door Soundproof Welding Booths Dimensions (5) W2,000 x D2,500 x H2,700mm & W3,000 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,119 x D1,284mm. Please see document attached for more details.

Year of construction: 2017, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, The SMRE machine is used for hot air welding of PVC fabrics and synthetic materials. The machine is in like-new condition and has been used very little. The working width is 800 cm. Dodpfx Aszkqm Hepieck

Condition: good (used), Year of construction: 2021, KELLER – Production line for prefabricated wall panels Dcodpfxjziwple Apiok Fully automated production line for manufacturing prefabricated wall panels made of lightweight concrete blocks. Year of manufacture: 2021 The line consists of: Unpacking and block feeder Layer formation with lateral pushers Mortar mixer and application system Storage and buffer zone for finished wall panels Final inspection and palletizing of the prefabricated components Block dimensions: 15 - 36.5 cm Output: approx. 400 - 480 m² / 8 hours Wall length: max. 6.5 m / min. 1.5 m Wall height: max. 3.5 m / min. 4 blocks The line is available immediately. Location: Germany.

Year of construction: 1988, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M8298, Bandsaw, blade saw for soft materials. The machine has an overhang of 1260 mm. Dsdpfxezivv De Apieck Cutting length: approximately 2300 mm. Cutting height: approximately 900 mm.

Condition: used, Length: 12,000 mm. Dcodpfx Aozilxbspiok

Condition: used, machine/vehicle number: 22011 SLS, Year of construction: 2023, Laser Data Marking Laser Manufacturer: Keyence Model: MD-X2520A Laser type: YVO₄ laser Laser class: 4 Wavelength: 1063 nm Output power: 25 W Laser Position Detection Laser type: Semiconductor laser Laser class: 3R Wavelength: 683 nm Output power: 5.0 mW Guide Laser / Distance Indicator Dcsdpfx Aszilv Hjpijk Laser type: Semiconductor laser Laser class: 2 Wavelength: 655 nm Output power: 1.0 mW Electrical Data Nominal voltage: 400 VAC Frequency: 50 Hz Control voltage: 24 VDC Nominal current: 23 A Power: 15 kW Back-up fuse: 50 A Diversity factor: 0.9 Power supply: 3 × 400 V + PE

Condition: not inspected (used), Data Tabletop dimensions: approx. 730 x 730 mm Suitable for the Fanuc M900iB/280L robot Overall dimensions: approx. 940 x 810 x 660 mm Dcsdpfx Aozilrhspiok

Condition: not inspected (used), Industrial enclosure Previously used as a measuring room Completely enclosed industrial enclosure Dimensions Roller shutter door approx. 3500 × 2960 × 2960 mm Complete enclosure approx. 22,000 × 15,000 × 9,000 mm Lifting equipment ABUS overhead crane Load capacity: 1 ton Dcjdpfxszilmxs Apiok Ventilation and air conditioning system 2 outdoor units from Mitsubishi Electric Mitsubishi Unit 1 Type: PUZ-M125VKA2 Year of manufacture: 2022 Mitsubishi Unit 2 Type: PUZ-M125VKA2 Year of manufacture: 2022