neuform Türenwerk Hans Glock GmbH & Co. KG

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2.050 mm - Used - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray Kodpfx Ahoya H H No Nsdg - Voltage fluctuations +/-5% - Location: in stock

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2.050 mm - Used - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray - Voltage fluctuations +/-5% - Location: in stock Kdedsya H H Ajpfx Ah Neg

Year of construction: 1994, condition: used, machine/vehicle number: 41094/30, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1.750 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. Kdodpeya H Hiofx Ah Njg - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, machine/vehicle number: 005063, Max. panel width: 1300 mm Max. panel length: 3200 mm Length of conveyor: 12300 mm Panel return for edgebander: Left Kdsdpfxoyay Rbj Ah Neg

Year of construction: 2014, condition: used, machine/vehicle number: DB407803A, Technical data: - Manufacturer: Cefla - Type: TR 3000 - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop Kdjdpfjyatdzex Ah Nog - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: like new (used), trough length 2.7 m trough width 440 mm height 1430 mm Kjdpfxoyaa Rbj Ah Nodg safety switch

Condition: excellent (used), Return devices, return conveyor for edgebander boomerang Ligmatech ZHR 05 Kodpfsx Uxaxsx Ah Nsdg Year: 2012 Model: ZHR01/R/055 Dimensions: Boomerang - 250 x 210 cm Belt - 360 x 125 cm Rollers - 200 x 120 cm Feed speed range: 8-25 m/min

Year of construction: 2003, condition: used, machine/vehicle number: 14384, - Manufacturer: Aagaard/Finnrose - Type: FB 3.5 - Length: 3,500 mm - Year of manufacture 2003 - Working width: 1,350 mm - Total width: 1,460 mm - Working height 900 + - 20 mm - Height adjustable - Location, in stock Kdodox Urmfepfx Ah Nog - Volts, Hz 400 / 50 - Motor power 0.55 kW - Location: in stock

Year of construction: 2002, condition: used, machine/vehicle number: 5713, - Manufacturer: Elmag Superfici Kdedpfx Ahox Url Us Njg - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Condition: used, Price: On request Kodsx Sxwfopfx Ah Nsdg - Documentation available: No - CE certificate present: No - Automatic output system present: Yes - Lift table present: Yes - Automatic feed system present: Yes - Voltage [V]: 400 - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 008373, Max. panel width: 2500 mm Max. panel length: 1000 mm Panel return for edgebander: Left Kdjdpfxex Swd Rs Ah Nog

Condition: used, machine/vehicle number: 008364, Max. panel width: 1000 mm Kdjdpfx Ajx Swc Toh Nog Max. panel length: 2500 mm Length of conveyor: 6550 mm Panel return for edgebander: Right

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Kodex Rpgbspfx Ah Nedg Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Condition: used, Chain conveyor Kdodpfx Ahjx It T Te Nsg Length (total): 1745 cm Width: 48 cm Chain width: 38 cm Height: 34 cm Motor power: 3.0 kW

Condition: used, Screw conveyor Length: 330 cm Width: 46 cm Height: 45 cm Motor power: 3.0 kW Kjdpfjx Ity Tjx Ah Nodg

Condition: good (used), functionality: fully functional, EUROPA 4-roller feed unit with automatic arm Kdsdpfjx Ih E Dox Ah Nog Specification: • condition – used, after inspection • manufacturer – EUROPA • 4 new feed rollers, dimensions 120x60 mm • forward/reverse rotation • variable working speed using a variator in the range of approx. 3–22 m/min • motor powered by 380V (3-phase) • automated feed height and position setting (electric motors) • weight approx. 70 kg Additional information: • good technical condition • the photos provided show the actual condition of the item for sale • possibility to switch on and test the device on site

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, For right-sided edgebander To suit machine length 6m-7m Ideal for Homag Edgeteq S-300 (KDF1440/1450) or Homag Edgeteq S-380 (KDF1650) Workpiece length: 300 - 2,500 mm Workpiece width: 50 - 1,450 mm Kodpfx Aox Igbdjh Nedg 4-sided processing* min. workpiece length: 300 x 300 mm 4-sided processing* max. workpiece length: 1,450 x 1,450 mm Workpiece thickness: 8 - 60 mm Workpiece weight max.: 50 kg Mass per unit area: 25 kg/m² Working height: 835 - 950 mm Feed speed: 8 - 25 m/min

Condition: used, machine/vehicle number: 006200, Max. panel width: 800 mm Max. panel length: 2000 mm Kodjx Idxyjpfx Ah Nedg Length of conveyor: 5700 mm Panel return for edgebander: Left

Condition: used, machine/vehicle number: 005916, Max. panel width: 800 mm Max. panel length: 2400 mm Length of conveyor: 10000 mm Kdjdpfsx Idwpjx Ah Njg Panel return for edgebander: Right

Condition: used, machine/vehicle number: 008324, Max. panel width: 1000 mm Kdjdpjx Hpkrofx Ah Nog Max. panel length: 2500 mm Length of conveyor: 7000 mm Panel return for edgebander: Right

Condition: used, - Suitable for boards from 2,500 mm to 6,500 mm in length - 6-strand roof chain conveyor - Powered discharge arms - Approx. 6,000 mm long Ksdpfox E Sqxex Ah Njdg - Approx. 750 mm wide - 3-strand powered sorting conveyor approx. 10,000 mm long - Integrated powered alignment roller conveyor - 6 individually mechanically adjustable discharge positions - Step-by-step feed

Year of construction: 2006, condition: reconditioned (used), functionality: fully functional, Edge spraying machine Manufacturer: Makor Model: Iride 204 Year of manufacture: 2006 Automatic painting machine for edges, small parts, profiles... Kdsdpfjx E Rylox Ah Nog Belt width: 150 mm Passage opening: approx. 260 mm Passage width with guide rails: approx. 250 mm Workpiece length: approx. 500 mm – unlimited Machine prepared for max. 4 spray guns and 2 spraying circuits Feed speed infinitely adjustable, max. approx. 150 m/min With extraction fan, 2.2 kW, 1450 rpm Connection: 380 V, 50 Hz, 3 phase Includes: 4x Airmix high-pressure spray guns 4x Airmix low-pressure spray guns 1x high-pressure pump 1x diaphragm low-pressure pump Machine is completely cleaned and technically checked. 3 conveyor belts have been replaced, hose connections have been partly renewed, and the control battery and software have also been renewed/restored.

Condition: used, functionality: fully functional, Roller conveyor for lumber, length 16 meters, with ejector left/right and impact wall. Roller length 93 cm. Kdedpsx Dtkuefx Ah Neg

Condition: used, machine/vehicle number: 005607, Max. panel width: 2400 mm Kdodpfx Ajx A Tlvoh Njg Max. panel length: 2500 mm

Condition: used, machine/vehicle number: 008210, Max. panel width: 800 mm Max. panel length: 2500 mm Length of conveyor: 10000 mm Kdsdpfsx A Thwex Ah Nsg Panel return for edgebander: Right