Cornils GmbH

Condition: used, Year of construction: 2002, 17 METRES INFEED. GRIPPER FED. 14 METRES OUTFEED. APS 1015 3 SPINDLE DRILLING MACHINE. Hsdpfx Abex N Ibze Isk KBS 1001 SAWING MACHINE. INFEED & OUTFEED CROSS TRANSFERS.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CMA automatic coordinate drilling machine type GRD 40 CNC 3030 table size: 3000x3000 mm X-axis speed: 18 m/min Y-axis speed: 12 m/min Z-axis speed: 5 m/min spindle-to-table distance: 160-660 mm table height: 770 mm Drilling capacity: Hsdow Tidkspfx Ab Iok Steel 60: 40 mm Cast iron: 40 mm spindle speed: 750-3000 rpm Spindle taper: BT40 motor power: 7.5 kW total machine weight: 8,500 kg

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 100 mm max. pitch circle: 7000 mm number of spindles: 2 bore spindle turning speed range: 1 - 3000 U/min high speed spindle taper ISO: 50 bore slide stroke: 900 mm feed speeds: 1 - 6000 mm/min max. workpiece weight: 18000 kg total power requirement: 125 kW dimensions of the machine ca.: 13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Hjdpfxovb Drhj Ab Isk Chip conveyor and coolant device *

Condition: used, TECHNICAL DETAILS * Spindle speeds : 200-20000 [rpm] * Travel : 38 [mm] - Distance table/spindle axis : 89 [mm] - Table dimensions : 182 x 300 [mm] - Machine height : 342 [mm] Hjdjuhab Hepfx Ab Isk EQUIPMENT - Collets set

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column Hedsrb Afajpfx Ab Isk

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. Hjdpjhkhumsfx Ab Iek -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.