PMH Handels GmbH

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Ppjdpsyf I T Uefx Aaljl Edge feed for coil and strip material Scraper knife

Condition: ready for operation (used), functionality: fully functional, feed rate X-axis: 12 m/min, edge thickness (max.): 10 mm, overall weight: 1,530 kg, rotational speed (max.): 12,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS Panel height: 1,060 mm Maximum edge thickness: 10 mm Minimum panel length: 140 mm Minimum panel width: 85 mm Feed speed: 12 m/min Sanding Unit Motor power: 2.4 HP Speed: 12,000 rpm Tool diameter: 80 mm Extraction port diameter: 60 mm Gluing Unit Psdpfx Asyf Ed Rjaljpl Glue pot capacity: 2 kg Glue application roller diameter: 25 mm Pressure roller cutter, large roller diameter: 100 mm Pressure roller cutter, small roller diameter: 80 mm End Trimming Unit Motor power: 1.07 HP Maximum tool diameter: 140 mm Extraction port diameter: 80 mm Milling Unit Motor power: 0.87 HP Tool diameter: 70 mm Extraction port diameter: 80 mm Scraper Unit Extraction port diameter: 60 mm Joint Scraper Unit Extraction port diameter: 60 mm MACHINE DETAILS Compressed air connection: 7 bar Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,000 x 1,600 mm Weight: 1,530 kg EQUIPMENT Electronic control panel with USB port Sintra software Touch probe devices Vertical and front touch probe devices with rotating discs Removable panel support arm

Condition: not inspected (used), functionality: unexamined, feed rate X-axis: 30 m/min, edge thickness (max.): 25 mm, overall weight: 3,500 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Edge thickness min: 0.6 mm Edge thickness max: 25 mm Coil material thickness min: 0.3 mm Coil material thickness max: 3 mm Panel height min: 10 mm Panel height max: 60 mm Panel width min: 70 mm Feed speed: 8-30 m/min Extraction port diameter: 120 mm Blade diameter: 140 mm Blade spindle speed: 12,000 rpm Milling unit Milling unit tool diameter: 80 mm Milling unit motor power: 0.75 kW Milling unit spindle speed: 12,000 rpm Chamfering unit Chamfering tool diameter: 80 mm Chamfering motor power: 0.75 kW Chamfering spindle speed: 12,000 rpm Rounding unit Rounding unit motor power: 0.35 kW Rounding unit spindle speed: 12,000 rpm Ppsdjyf Ebvopfx Aalol Sanding machine Oscillating sanding motor power: 1.5 kW Oscillating sanding speed: 1,400 rpm Brushing unit Brushing unit motor power: 0.3 kW Brushing unit speed: 1,450 rpm Compressed air requirement: 6 bar MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 8,200 mm x 1,500 mm x 1,650 mm Weight: 3,500 kg EQUIPMENT Fully automatic edge banding machine Sanding unit Processing of wood, veneer, PVC, ABS, and furniture edges CE certification Automatic pressure beam lifting Controlled guidance prior to sanding Group of 2 sanding units Glue pot with pre-melting unit Pneumatic pressure rollers Soundproof safety enclosure Tilting end trimming unit Edge sanding unit Feed speed variator

Condition: used, Year of construction: 2002, functionality: fully functional, Finish sanders Pre-melter End trimming units Edge trimmers Corner rounding units Edge scrapers Ppjdpfjyf D Uhjx Aaljl Glue scrapers

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 201011RX000004, feed rate X-axis: 20 m/min, workpiece height (max.): 120 mm, edge thickness (max.): 16 mm, overall weight: 2,400 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Panel thickness min./max.: 10 mm / 120 mm Panel length min.: 140 mm Panel width min.: 60 mm Edge thickness: 0.4 mm - 16 mm Variable feed rate: 10-20 m/min Edge height: 120 mm MACHINE DETAILS Pedpjyf D Ubefx Aalepl Installed power: 22 kW Compressed air: 6 bar Dimensions & Weight Dimensions (L x W x H): 6,730 x 1,500 x 1,910 mm Weight: 2,400 kg EQUIPMENT 10.7" color electronic touchscreen control Servo-controlled axis infeed guide Section 2 pre-milling unit - motors 2.2 kW - 6,000 rpm - diamond tools 100 mm x 120 mm x 30 mm Infrared lamp 0-600°C - 600 Watt Cooling anti-adhesive spray system Automatic edge feeder Universal gluing station with pre-melter for PUR and EVA adhesives Quick-release glue pot Servo-controlled axis pressure units Roller edge trimming for 3 mm PVC/ABS Glue pot cleaning table End trimming unit with 2 tilting motors, each 0.50 kW - 12,000 rpm Tilting trimming unit with servo-controlled axis - motor 1.1 kW - 12,000 rpm Corner rounding unit with 2 motors - 0.22 kW - 12,000 rpm Pull-off unit with servo-controlled axis Glue scraping unit Buffing unit - 0.18 kW - 1,400 rpm Dryer unit 0-600°C - 4,000 Watt Soundproof enclosure Fixed panel support roller conveyor Extraction: 7 inlets Ø80 mm, 1 inlet Ø120 mm

Condition: used, Year of construction: 2005, Single-sided edge bander designed for precise and stable edging of solid wood and panel components (chipboard, MDF, laminate). The machine is conceived as a compact yet fully equipped solution for small- and medium-batch production, with an emphasis on edge processing quality. A robust cast iron frame ensures high rigidity and long-term geometric stability of the machine. It features a classic continuous conveyor with a pressure belt and a complete set of machining units for finishing the edge in a single pass. Ppjdpfx Aeyfw Syjalol Technical configuration of the machine: - Pre-milling unit - Material pre-heating - Automatic EVA glue application - EVA glue roller - Front and rear end trimming saws - Rough trimming unit - Corner rounding unit - Radius scraper - Glue scraper - Grooving unit - Brushing unit - Return conveyor

Condition: good (used), Year of construction: 2022, operating hours: 167 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Further technical data 5,964 linear meters total 167 operating hours High-precision cross-cut saw unit with radius milling up to 2 mm edge materials Jointing unit incl. diamond cutters Podpoyfv Ugofx Aaljpl 5 mm package for bonding solid wood edges "Quick-Set System" for rapid adjustment to various materials Control panel with LCD display and keypad Exchangeable glue pot Ball-bearing turntable for roll edge material Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Turntable diameter: 740 mm Edge thickness: 0.4–5 mm Extendable workpiece support, extendable up to 450 mm Additional equipment 21 Surface scraper instead of polishing unit 42 Application of release agent by spraying

Condition: good (used), Year of construction: 2017, operating hours: 130 h, functionality: fully functional, input voltage: 400 V, power: 6.5 kW (8.84 HP), input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Ppsdpfxjyfvhae Aalsl Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: used, Year of construction: 2014, Storage location: Supplier Ppjdpfx Ajyfp N Dealsl

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips Podpfsyfn Urjx Aalspl with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate settings Fully automatic edge magazine for coil and strip material Gluing station: Glue pellets + PUR application Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for coil and strip material up to 3 mm (6 mm) edge thickness Psdpfx Aajyfn Tnelopl Adjustable bevel from 0-10° on the trimming saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraper unit for bevels and radii Flat scraper unit - finishing Machine is INSPECTED and in TOP CONDITION from a very well-maintained workshop Available from stock in Lieboch

Condition: used, Holz Her Accura 1556 Premium fully equipped, modern edge banding machine First delivered in 2021 Machine is in EXCELLENT CONDITION Available from stock in Lieboch Pedpfjyfndaex Aaljpl

Condition: used, Year of construction: 2010, functionality: fully functional, Sale on behalf of customer! Location: Spain Excellent condition, ready for immediate use. Loading or delivery by owner possible. Maximum workpiece thickness: 45 mm Minimum workpiece length: 220 to 350 mm Maximum edge material height: 50 mm Minimum edge material length for fixed dimensions: 330 to 400 mm Maximum edge material overhang top and bottom: 2.5 mm Edge material overhang front: approx. 10 to 20 mm Edge material overhang rear: approx. 10 to 30 mm Minimum workpiece width: 90 mm Minimum workpiece thickness: 10 mm Maximum length with extension: 4269 mm Working length with extension: 4269 mm Depth with roller tables: 1425 mm Working table height: 888 mm Working width with retracted support: 210 mm Ppsdsyfickopfx Aalsl Working table width with extended support rail: 680 mm With milling unit Installation dimensions approx. (L x W x H): 4000 x 1300 x 1700 mm Weight approx.: 1250 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Edgebander SCM Olimpic K360 T-E AAR spray unit Pre-milling unit TR V1 Infrared pre-heating Glue pot VC VM Radius trimming unit K2 Milling unit RK Scraping unit RC V Available from April 2026 Ppsdpfeyfh Ifsx Aalel

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Cart for the management of all cleaning operations of the glue pots and the maintenance of polyurethane glue in complete ergonomics and safety. Easy cart can be placed within the production area in a completely independent way thanks to its wheels and the small overall dimensions of less than one square meter. All connections are equipped with quick couplings to ensure easy removal and installation. Podpfxeyfhnxj Aalspl Easy cart allows the simultaneous management of up to 3 glue pots: 2 glue pots in the maintenance position inside the special tank and 1 in external position with motorization for cleaning, maintenance, and glue change. All glue pots can be thermoregulated for a quick process changeover.

Condition: used, Year of construction: 2020, machine/vehicle number: 462/2-003, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, Ppodpfxeyfg Dfo Aalol organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea bunului identificat in prezentul anunt. Prima licitație va avea loc la data de 11.02.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 04.02.2026 între orele 10:00-14:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar și să își exprime intenția de participare, anterior datei stabilite. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA pentru bunurile de până la 5.000 euro și de 1.000 lei+TVA. pentru bunurile de peste 5.000 euro. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Psdpfx Aoyfgrpjaljpl Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: used, Year of construction: 2008, functionality: fully functional, Sale on behalf of customer!\n\nLocation: Spain\nExcellent condition, immediately ready for production. Loading or delivery by the owner possible.\n\nCutting thickness\n0.4–8 mm\nWorkpiece thickness\n8–60 mm\nFeed rate\n8–14 m/min\nBevel trimming\n2 x 2.2 kW\nCutting unit\n2 x 0.18 kW\nRoughing unit\n2 x 0.55 kW\nControl system\nPC 20 PLUS\nDimensions (L x W x H) approx.\n5,000 x 1,400 x 2,000 mm\nWeight approx.\n2,000 kg Pjdpfx Aeyff H Esalspl

Condition: used, Year of construction: 2015, Plate feed direction: from operator to the left Max. edge thickness: 2 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 40 mm Min. workpiece length: 180 mm Feed speed: 7 m/min Heating-up time: 4 min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutter, diameter 70 mm Infeed fence adjustment: manual Guillotine up to: 2 mm Ppsdpfx Asydqg Ijalel Single edge feeding: possible Gluing: glue contact roller PUR gluing: possible Crosscut saw: Yes Combination unit flush/chamfer/radius: pneumatic adjustment Corner rounding unit: pneumatic adjustment Flat scrapers: Yes, sensor-controlled Aggregate display: on display Control type: PLC line control Operation: touch screen Mobility unit: No Extendable roller support: Yes Protective hood: Yes Weight approx.: 750 kg Extraction diameter: 140 mm Storage location: Customer

Condition: excellent (used), functionality: fully functional, pre-milling aggregate granulate glue station maximum working height 60 mm guillotine for trimming edge band from the roll precision edge band trimming unit Pjdpfxjydpp Ie Aalspl milling aggregate for trimming edge band excess from the top and bottom of the panel profile scraper flat scraper polishing units machine length 420 cm year of manufacture 2012 CE mark

Condition: excellent (used), Edgebander SCM ME28T Pre-milling unit Glue application with roller, Pneumatic pre-cut guillotine, Pressure rollers, End-cutting saw, Top and bottom milling unit R1 – R2, Profile scraper Flat scraper, Machine length: 310 cm, Psdpfeydmkisx Aalspl Feed speed: 7 m/min, Max workpiece height: 50 mm, Min length: 190 mm Min width: 110 mm Max edge thickness: 2 mm, Used machine, very good condition Total processed: 21,850 m

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0-200-03-8334, feed rate X-axis: 24 m/min, workpiece height (max.): 60 mm, controller model: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fusing: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Psdpfxeydiymj Aalepl Electronically adjustable working height via CNC Powered, rubberized conveyor belt with increased pressure Panel support guide Lateral roller conveyor with idler rollers for panel support Sanding unit Infrared lamps for panel edge preheating Six-position coil holder magazine with automatic edge change via CNC EVA hot-melt gluing unit with premelter and glue pot Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with two motors and automatic tilt adjustment Overlapping cut-off / milling unit with two motors Glue / milling unit with two tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (smoothing + rounding) with CNC control, automatic adaptation Provision for integrating an additional working station Edge scraping unit Oscillating brush unit

Condition: ready for operation (used), functionality: fully functional, feed rate X-axis: 14 m/min, workpiece height (max.): 55 mm, TECHNICAL DETAILS Panel height: 55 mm Solid wood: 8 mm PVC/ABS: 0.4 to 3 mm Feed speed max.: 14 m/min MACHINE DETAILS Control system: TS 200 touchscreen Ppedoydircopfx Aaljl EQUIPMENT Adjustable working height Guide for panel infeed Side roller conveyor with free-running rollers for panel support Roller holder plate Glue application unit for EVA hot-melt adhesive with glue pot Edge pressing unit for straight profiles with adjustable pressure rollers End trimming unit with 2 motors and automatic tilt adjustment Milling/trimming unit with 2 adjustable tiltable motors Corner rounding unit with 2 multifunctional motors (milling + rounding) Scraping unit for edge Scraping unit for glue Brush group

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-261-04-5659, feed rate X-axis: 14 m/min, workpiece height (max.): 60 mm, controller model: Power Control Check 20+, grinding spindle motor power: 2,200 W, TECHNICAL DETAILS Panel height: 8 - 60 mm PVC/ABS thickness: 3 mm Pre-scoring depth for wood: up to 8 mm Feed speed: 8 - 14 m/min MACHINE DETAILS Control unit: Power Control Check 20+ Output per sanding motor: 2.2 kW Supply voltage: 400Y/230 V Phases: 3 Frequency: 50 Hz Full load operating current: max. 23 A Largest motor: 4.5 A Largest heating circuit: 3.1 A EQUIPMENT Electrically adjustable working length via CNC Lateral roller conveyor with idler rollers for panel support Coil holder plate Gluing unit for EVA adhesive with pre-filler and glue tank Edge pressure unit for straight profiles, with CNC-adjustable pressure rollers Indexing group with automatic tilt adjustment Overlapping milling unit with 2 motors Rounding unit with 2 multifunction motors (chamfering + rounding) with CNC automatic adjustment Edge scraper unit Glue scraper unit Brush unit Pjdpfxeydim Tj Aalspl

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0-261-20-5976, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control system: POWER CONTROL PC 20+ Operating current at full load: max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Ppsdpfoydihdox Aalel Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear corner rounding unit with 2 motors Edge scraper unit Glue scraper unit Brushing unit