Lindner Wartung und Service für Verpackungsmaschinen

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Godpfjzuaprox Anmjbr ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Bushing Cutoff Gbodpfx Anjzt Tausmor IAC Enclosure

Year of construction: 2005, condition: used, Plastic shredder Gbjdpozt R Szjfx Anmjr

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. Gbsdpfjzt R E Ujx Anmjr With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: used, functionality: fully functional, Separate single-position unit with a horizontal roller shaft, presumably with pneumatic clamping, housing/drive unit, pneumatic auxiliary functions, and its own control panel with a material length counter. Intended for the controlled feeding of web-shaped materials into a subsequent coating, laminating, or Gedpjzt I U Tofx Anmjbr converting system. Manufacturer: Cavitec, Caratsch–Villars, Münchwilen, Switzerland. Model, year of manufacture, serial number, electrical connection values, maximum roller data, and web speed are unknown due to the absence of a nameplate.

Condition: new, Model CNC 114R1 Max. steel tube capacity (mm) 114.3 x 6 Max. stainless steel tube capacity (mm) 114.3 x 5 Min. tube diameter (mm) 32 Max. steel profile capacity (mm) 80 x 80 x 4 Max. radius (CLR) 300 Min. radius (CLR) 55 Control system PLC Gbsdpjzt Ir Sefx Anmor Max. bending angle (°) 190 Screen 17” Industrial PC with Windows touch screen Bending drive Hydraulic

Year of construction: 2023, condition: new, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Godpfx Aszt Iq Usnmjbr

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive Gbjdpfx Aezt Ip Rjnmer onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, • wood, • paper and cardboard, • textiles, • cables, • light industrial and recyclable waste. Gbjdpfx Ajzt Hmzsnmer Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Year of construction: 2004, condition: used, 2004 Design Environmental FS5250-25S Environmental Chamber with Digital Control Ambient Temperature Range 10°-27°. Ambient Humidity Range 10%-80%. Refigerant R404A. Chamber Dimensions Approx 1,750mm x 1,500mm x 2,000mm High. With Stand Alone Compressor. S/No. A3254. Gbodpfx Anezty Aijmor Dimensions of Machine Approx 2,700mm x 1,700mm x 2,400mm. Power Supply 415 Volt, 21.9 Amp.

Year of construction: 2007, condition: used, Free-running crate transport system for a reusable glass bottle filling line. The system consists mainly of motorised chain conveyors, with some roller conveyors as well. Both straight and curved conveyor sections are included. Additional title: Crate conveyor system comprising motorised conveyor chains Capacity bottle filling line: 12000 bo/h Current: 63 A Voltage: 400 V Frequency: 50 Hz Gbodpfx Ansztyzfomjr Operation / Control: Simatic S7-300

Condition: used, Cleaning-in-place system, completely mounted on a frame. The system consists of the following components: - 2 rectangular CIP tanks with hinged lids, each equipped with a heating coil. Gross capacity approx. 750 l and 500 l respectively. - Self-priming centrifugal pump (INOXPA, 2001, 3 kW, 15 m³/h) as CIP feed pump. - Control cabinet in housing with button panel - Various pipes, valves, actuators and sensors Additional title: Cleaning system with 2 containers Volume container 1 appr.: 750 l Volume container 2 appr.: 500 l Gedpeztywmjfx Anmebr Length: 2,20 m Width: 1,60 m Height: 1,60 m Material: CIP containers from stainless steel Base construction: mounted on frame Features: 2 CIP containers, each with heating coil; CIP feed pump; various piping; actuators; sensors; control cabinet; frame

Year of construction: 2000, condition: used, Conveyor belts for glass bottles, with 2 pressureless merges Transport with 1, 3 or 4 conveyor belts Capacity: 30,000 bottles/hour Manufacturer: Krones Year of manufacture: 2000 Gbjdsztyblopfx Anmsr Additional title: Section up to filler Capacity appr.: 33000 bo/h Conveyor belt widths: 4 conveyor belts Formats: 0.33 l Vichy, 0.33 l Euro, 0.35 l lemonade, and 0.5 l NRW Operation / Control: Simatic S7-300 Material: mainly stainless steel Position: free standing Features: conveyor frames, deflection stations, drives, frequency controls, electrical switching devices, 2 pressureless bottle merges (17/9/7/5/3/1 and 12/7/3/1 belts), automatic belt lubrication

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 32/5, Rotary screen S = 1.5 P = 0.55 kW Godeztxw Sjpfx Anmebr N = 9 rpm Weight: 450 kg Dimensions: 630 x 1500

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V Gbodpjztxvnjfx Anmer 2. Quantity: 2 pcs.

Year of construction: 2010, condition: used, The belt dryer is ready for use; a video can be sent via WhatsApp. The dryer is no longer needed. It includes the feed screw, the blower unit, and the discharge screw, meaning it is complete. Gbodpfeztwhvsx Anmjr

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1580000152, total width: 610 mm, total height: 1,300 mm, total length: 690 mm, overall weight: 89 kg, You can find more information in the attached brochure. This is the TAC V+ GR/BK model. Gsdpfoztwfhsx Anmsbr There are 3 air purifiers available. If all 3 are purchased, the total price is €500.

Condition: new, CNC 76R1 Max. capacity for steel tube (mm): 76x5 Max. capacity for stainless steel tube (mm): 76x3 Max. capacity for steel profile (mm): 60x60x3 Max. radius (CLR): 250 Min. radius (CLR): 35 Gsdpfx Aeztpunjnmsbr Max. bending angle: 190(°)

Condition: new, CNC-38/R3 Max. Diameter (max. O.D.) 38 mm Max. Wall thickness 2 mm Max. Diameter (max. O.D.) for stainless steel 438 x 1.5 mm Max. Bending angle 190 (°) Hydraulic pump motor 11 kW Total motor power 22 kW Max. Hydraulic pressure 140 (bar) Mandrel Length 3450 mm Machine Length 5850 mm Gsdpfxeztpf Ts Anmsbr Machine Weight 3000 kg

Condition: new, functionality: fully functional, Available: Heating unit for FINPRESSE 130-1-12 press plates – 18 kW, temperature up to 130°C. The machine is brand new and offered to order. Before placing an order, we confirm the current delivery time and the exact configuration of the unit. The main advantage of the unit is its independent heating and forced oil circulation system, which enables precise heating of the press's work surfaces. The 18 kW heating unit, LOWARA circulating pump, and digital temperature control ensure stable conditions during the gluing, veneering, laminating, and pressing of wood and panel components. Specifications: • Manufacturer: FINPRESSE s.a.s. • Model: 130-1-12 • Type of equipment: Mobile heating and circulation unit for press plates • Heating medium: diathermic oil / thermal oil • Power of the heating unit: 18 kW • Maximum operating temperature in configuration with LOWARA CEA80/5/D-V pump: 110°C • Digital temperature regulation and control • Power supply: 400 V • Power system: three-phase, 3F + PE • Manufacturer of circulating pump: LOWARA • Pump model: CEA80/5/D-V • Pump design: version with FKM elastomers • Pump motor rated power: 0.75 kW • Pump capacity: 30–100 l/min, i.e. approximately 1.8–6.0 m³/h • Suitable for presses with shelf lengths up to 3.0 m • Pump motor speed: approximately 2875 rpm • Pump motor protection rating: IP55 Gsdpfx Ajztl R Sonmebr • Independent control of the circulating pump and heating unit • Pump start-up indicator • Heating start-up indicator • Indicator light for reaching the set temperature • Fault indicator for the heating unit • Main power disconnect switch • Temperature sensor for the medium • Expansion tank located above the heating system • Separate supply and return manifolds • Multi-point connections enabling connection of press plate circuits • Tray for collecting any oil leaks • Drain connection • Mobile construction on transport wheels with locking capability • Weight: approximately 200 kg • Overall dimensions: approximately 140 × 45 × 240 cm (L × W × H) • Technical and operating documentation in Italian • Complies with CE requirements Applications: • Heating of work surfaces of hydraulic platen presses • Maintaining the set temperature during pressing and gluing of components • Veneering and laminating of furniture panels, MDF, plywood, and wood • Applying HPL laminates, natural veneers, and other surface materials • Pressing of furniture fronts, doors, and composite components • Stabilizing the temperature during bonding and curing of adhesives Additional information: • The equipment is offered to order • Current delivery time is confirmed before placing an order • The pictures show the offered model of the equipment in an example configuration • Maximum operating temperature depends on the pump used, seals, and type of thermal oil • Configurations designed to operate at temperatures up to 130°C • The machine is covered by a warranty under the conditions specified by the manufacturer • The price stated in the auction applies to export sales/WDT with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport with the MDD fleet or through external carriers • We help in obtaining a lease or leasing loan • Delivery costs depend on the destination and the method of transporting the equipment

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Godpfoztaahsx Anmjbr Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Year of construction: 2023, condition: used, The "Rest Wind" machine is an electrically powered winding machine used for the controlled winding of residual materials onto a winding core. The machine is designed to collect material remnants from production or processing operations in a clean and uniform manner. The material is guided through guide rollers and wound onto the winding mandrel. The electric drive enables consistent winding at an adjustable speed. The machine features a control cabinet with start/stop function, main switch, emergency stop, and control indicators. Gbjdezr I Azjpfx Anmor The machine can be inspected in 06502 Thale by appointment.

Condition: used, functionality: limited functionality, The machine has been used very little. Gjdpfx Aszr Iz Rsnmjbr

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, BEM 200 Case Former Gedpfx Anezr Ixijmsbr We offer for sale the BEM 200 Case Former. The BEM200 model is an automatic machine designed and manufactured for folding cardboard boxes and sealing their bottoms with tape. This model belongs to the mid-range/high-end category of machines and, due to its applications, covers almost all industries that use cardboard packaging.

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery Gsdpezr Ircefx Anmebr • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.