Fritz Huber Auktionen

Condition: not inspected (used), Year of construction: 2017, functionality: fully functional, Three sprue pickers, model WP 80, from Wittmann are for sale. These are used for removing sprues from injection molding machines. The robust design allows for quick removal with low vibration, ensuring high extraction precision. Z up to 95° Y up to 700 mm Kledey T D Iljpfx Adqet X up to 100 mm B up to 90°

Condition: repair required (used), Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 222971-1906-0457, travel distance X-axis: 300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 90 kg, pressure: 6 bar, input voltage: 230 V, The Geiger (device with intermittent operation) MiniServo II 1.5 is a servo-motor-driven extraction device or sprue picker, specifically designed for use on injection molding machines. The device is used to precisely and quickly remove sprues or small molded parts from the mold and place them aside. Swivel axis (A): 0-105° Extraction stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Servo-motor drive for the main axes Fail-safe mechanism (Y): electromechanical Sliding console Gripper F Rotary module B (pneumatic) with stop 1 compressed air circuit for gripper 1 compressed air circuit for rotary module B Kljdpfey Tn Rdjx Adqjt 1 vacuum circuit with monitoring Programming assistant for programming standard extraction sequences with 1 compressed air circuit and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable 5 m Placement area behind and in front of the machine RAL 9016 white Additional HT7 control, vacuum circuit, and consoles Sale only to commercial customers; warranty excluded.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: R006176-01, Industrial Haitian robot SEPRO Success 22, MFG 2018, SN: R006176-01 Success is a range of universal and economic robots that provide all the performance and reliability that you expect from Sepro. These 3-axis servo controlled robots can quickly and precisely perform simple and peripheral pick & place operations around the IMM. The powerful Touch 2 control system is easy to use and controls Success robots. Specifications Traverse (Horiz) Stroke Min 1,500 mm Traverse (Horiz) Stroke Max 6000 mm Max Speed (Traverse) 2 m/s Kick (Ejector) Stroke Min 700 mm Kodpfx Asy S Uc Rjdqjlt Kick (Ejector) Stroke Max 900 mm Max Speed (Kick) 2 m/s Vertical stroke minimum 1,400 mm Vertical Stroke Max 1,600 mm Max Speed (Vertical) 3 m/s Payload Max 10 kg Machine Tonnage Min 200 t Machine Tonnage Max 500 t Control CNC The buyer will be responsible for disassembling and getting everything ready for shipping; we will only cover the necessary logistical support, like a forklift. Price Euro 17.700 Euro + VAT, negotiable, ExWorks Simeria, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: R009060-01, travel distance X-axis: 3,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,600 mm, overall weight: 36 kg, type of input current: three-phase, input voltage: 400 V, controller model: Touch 2, maximum load weight: 15 kg, Equipment: documentation/manual, For sale: SEPRO Success 33 linear robot. The robot was in use until recently for the removal of plastic parts on an injection moulding machine. Klsdpfxey Rz H Ho Adqst Further specifications: Maximum handling weight: 15 kg Control: Touch 2 Interface: Euromap 67 Vacuum-pneumatic gripping functions: 4 including digital vacuum switch Pneumatic gripping functions: 4 Conveyor cycle: inside control cabinet Maintenance by plasma Kunststofftechnik is currently up to date. Horizontal traverse stroke - X: Stroke/maximum travel [mm]: 3000, optionally longer Drive: Servo motor Max. travel speed [mm/s]: 1700 Intermediate stop: CNC position measurement system Demoulding stroke - Y: Stroke range [mm]: 900 Drive: Servo motor Max. travel speed [mm/s]: 2000 Intermediate stop: CNC position measurement system Vertical stroke - Z direct arm: Stroke/maximum travel [mm]: 1600 Drive: Servo motor Max. travel speed [mm/s]: 3000 Intermediate stop: CNC position measurement system Rotational axes: Rotary axis R1 pneumatic 0° - 90° Rotary axis R2 S5-35 for payload 15 kg with intermediate stop at 90° -> This rotary axis is integrated into rotation 1, allowing rotation about the horizontal or vertical axis depending on the position of the first rotation. Rotation angles: 0° - 90° and 180°.

Condition: used, Year of construction: 2020, For sale is a sprue picker robot from Sepro. Technical data: • Type: Industrial Robot • Year of manufacture: 2020 • Control unit: MPA 2 P Kljdpfx Adjy Nlpvjqst • Payload: 2 kg • Equipment: Standard version with gripper

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Wittmann W828 Z=2500 mm linear robot , payload 5kg Euromap 67 X= 1105 mm Y= 1200 mm Z= 2500 mm Ksdpfoy Nkf Asx Adqelt Vacuum : 2 Number of axis: 3 Reach: 2500 mm Payload: 5 kg

Condition: excellent (used), Year of construction: 2017, Year of manufacture: 2017 Control: Visual 3 (PLC, Parallel Subprograms) Additional I/Os in the robot rack: 7 inputs / 8 outputs + 4 additional 1/0 cards 16 inputs / 16 outputs Communication interface with injection moulding machine: EUROMAP 12 (length 10 m) Conveyor belt control: YES Control cabinet: Separate Documentation: YES Robot condition: very good Warranty: None X-axis travel: 2500mm Klsdpfey Ey Aisx Adqjt Y-axis travel: 700 mm Z-axis travel: 1400 mm Payload: 5kg Servo R1: 182° Servo R2: 302° Workpiece gripping circuits: Number of digital vacuums : 8 Number of pressure circuits: 8

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Controls: Visual 2 (PLC, Parallel Subroutines) Additional I/Os in the robot rack: 7 inputs / 8 outputs + additional I/O card 16 inputs / 16 outputs Interface for communication with the injection molding machine: EUROMAP 12 Klsdpfxey Eyzxo Adqot (length 10 m) Conveyor Belt Control: YES Control cabinet: separately Documentation: YES Robot condition: very good Warranty: None X-axis travel: 3000 mm Y-axis travel: 700 mm Z-axis travel: 1400 mm R1 pneumatic head rotation: 0° - 90° R2 pneumatic head rotation: 0° - 180° and 0° - 90° Workpiece gripping circuits: Number of digital vacuum (level control from the robot panel): 2 (can work as pressure) Number of pressure circuits: 4 Number of digital vacuum (level control from the robot panel): 2

Condition: like new (used), Year of construction: 2018, operating hours: 7,500 h, We are selling our Multilift V 15KG with only 7,500 operating hours. The machine can be inspected/tested; original purchase price was €59,000! Technical Specifications: Z-axis (crosswise to the machine longitudinal axis) Stroke: 1,600 mm Max. speed: 3.0 m/s X-axis (parallel to the machine longitudinal axis) Stroke: 900 mm Max. speed: 2.0 m/s Y-axis (vertical/plunge axis) Stroke: 1,000 mm C-axis (for gripper rotation) - Swing range 0° / 90°, both end positions monitored and manually adjustable - Pneumatic drive, including valve control - Max. torque at 6 bar: 28 Nm - Weight: 2.6 kg First vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Second vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Third vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper Kedpfxey Emm Uo Adqelt Fourth vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Tenth pneumatic valve 5/3 with locked center position for gripper functions, piped to the gripper flange with quick-release couplings DN 2.7 for hose size OD 6 / ID 4; customer-side hose connection 8 freely programmable inputs for querying 8 gripper-mounted sensors, pre-wired to the gripper flange with a 25-pin connector; up to 8 sensors can be monitored; the corresponding mating connector for the gripper-side connection is included Second interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Third interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Fourth interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Interface with 4 freely programmable inputs and outputs, non-isolated, on a 42-pin socket on the MULTILIFT, for peripheral devices Additional interface with 16 freely programmable inputs and outputs (24V DC), non-isolated, wired to a 72-pin socket on the MULTILIFT Push-in fitting for hose size OD 6 / ID 4

Condition: excellent (used), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – mainly for removing parts from injection molds and handling components. The device is used in the plastics processing industry (injection molding machines), ensuring fast and repeatable work cycles, increasing production efficiency. The robot is equipped with a handheld controller (teach pendant), allowing for programming of movements as well as automatic mode. Technical data: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload / Application: robot for light-duty applications (parts removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode • Complete wiring • Weight: approx. 62 kg Equipment included: • SHINI robot • Handheld controller (teach pendant) • Pneumatic gripper • Cables and installation • Documentation (visible in photos) Condition: Ksdpfxsy Duzqe Adqslt Used – normal signs of use. Technically sound and ready for operation. Additional information: • Sold exactly as shown in the photos • Inspection before purchase possible • Pallet shipping available Applications: • Injection molding machines • Production automation • Part removal • Pick & place operations

Condition: good (used), Year of construction: 2016, Sepro success 22 x=700 mm y vert=1400mm Z(horiz.)=2000mm +C +A(R1, R2) year: 2016 price: 14.500 Euro contact: Mr. Rainer Eckerle Ksdpfxjy Av Hfe Adqjlt

Condition: used, Year of construction: 2016, overall weight: 150 kg, load capacity: 5 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Kledpfx Adey Aba Djqet

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, X: 420 mm Y: 1200 mm Z: 2000 mm C: 0 - 90 ° Kedpfxsyyyvrj Adqslt

Condition: ready for operation (used), Year of construction: 2006, X: 2500 mm Y: 1000 mm Z: 1500 mm Kedsyyby Sjpfx Adqslt R1: 0 - 90 ° R2: 0 - 180 °

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, X: 2500 mm Y: 1000 mm Z: 1500 mm Kledoyybx Ujpfx Adqjt R1: 0 - 90 ° R2: 0 - 180 °

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, Very well-maintained Multilift V 15, like new! Klodpoywtzvefx Adqet

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Linear Robot / Take-out Robot SEPRO S5-25 med Manufacturer: SEPRO Robotique S.A.S. Model: S5-25 med Machine type: Linear robot / take-out robot – currently used on an injection moulding machine, but can also be used as a stand-alone unit for other applications Ksdpfx Aoytnxgedqjlt Year of manufacture: 2024 Maximum output: 1.5 kVA Weight: 100 kg Voltage: 3×400 V to 3×480 V ±10 % Frequency: 50/60 Hz Short circuit withstand: 10 kA Automation system manufacturer: SEPRO Robotique GmbH CE marking: available Location: Freiburg

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Year of manufacture: 2007 Klsdjyk U Hropfx Adqot Can be inspected and tested!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Year of manufacture: 2007 Kljdpfxsyk U Ens Adqjt Can be inspected and tested!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Year of manufacture: 2007 Can be inspected and tested! Kodpfx Asyk U D Dsdqslt

Condition: used, Year of construction: 2017, Handling device with picker A) Geiger Handling GmbH – System: Geiger Handling MidiLiner 5.0 S – Year of construction (handling system): 2017 – Axis system: X / Y linear axis (gantry) B) – Robot: Yaskawa Motoman MYS450 Ksdpfx Aeyk E Erjdqolt – Year of construction (robot): 2016 – Robot payload: 8 kg – Integrated controller, teach pendant available – Application: parts handling / pick & place / assembly feeding – Visual condition: used, clean for industrial standards, already disassembled Location: Southern Germany _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images shown. The technology and wear correspond to the age of the items offered. Used machines are sold exclusively to businesses and without any warranty.

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 6 kg X=420mm Kljdpoyftw Esfx Adqet Y=1200mm Z=1500mm EUROMAP 67

Condition: good (used), Year of construction: 2011, Number of axis: 3 Reach: 1500 mm Payload: 5 kg X= 390mm Y=1000mm Kjdpfx Asyfhxksdqjlt Z=1500mm C= 0-90 pneumatic

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 5 kg Kedpjyfhw Hjfx Adqelt X=420mm Y=1200mm Z=1500mm c= 0-90 pneumatic

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 6 kg Klsdpfx Aoyaq T Tjdqot X=420mm Y=1000mm Z=1500mm EMP67 interface