Kaufmann

Condition: ready for operation (used), total length: 10,700 mm, total width: 3,700 mm, Beiteldraaibank - met 2 beweegbare beitelgeleiders - voor elektromotoren, pompen, ankers etc. Beweegbare centra Dwarsslede: 500 mm verstelbaar Middenhoogte: 1000 mm (eenvoudig instelbaar) Met Asea-motor 31 kW (variabele snelheid) Distance between centers: 7300 mm Swing over bed: 3400 mm (expandable) Swing in gap: 3400 mm Power on main spindle: 30 hp Kedpfx Adsycmp Ns Newt Number of speeds: 9 -> 27 rpm Chuck (3/4 pinch) -- diametre: Ø 2550 mm Max weight between centers: 12000 kg

Condition: ready for operation (used), controller model: Siemens 840 T, empty load weight: 15,000 kg, swing diameter over cross slide: 430 mm, Dubbelspindel CNC-draaibank met hoog vermogen, ideaal voor flenzen en tandwielen. Uitgerust met duplex werkstuk Laad- en losrobot. Max. werkstukgrootte: Ø 355 x 430 mm Vermogen op beide spindels: elk 35 kW Snelheid: max 2500 tpm Kedpfx Ajycmp Aed Njwt Type: FR 23Q-2 CNC Duitse kwaliteit Swing over bed: Ø 355 mm Max longitudinal travel Z-axis: 250 mm Power on the spindle: 35 kW Number of speeds: max 2500 rpm Toolchanger: yes Number of tools: 2 x 8 positions

Year of construction: 2014, condition: used, machine/vehicle number: 239319, recorded operating hours: 14,765 (as of 08/25), weight: 6,760 kg, 12-position tool changer, MAZATROL Smart control, lubricant processing system, chip conveyor, spindle stroke: 1,300 mm, max. machining diameter: 380 mm, SMW K3-ZSW steady rest, ATTENTION: Collection of this item only by prior arrangement!!! Kwedpfx Adjycitds Njt

Year of construction: 2015, operating hours: 18,025 h, condition: used, machine/vehicle number: 0031000248A, Stock No.: 394600, travel X/Z: 267, 5x600 mm, max. turning diameter: 400 mm, max. spindle speed: 4,000 rpm, net weight: approx. 5,200 kg, dimensions LxWxH: approx. 410x183(252)x190 cm, control: SIEMENS Sinumerik 840D sl, with SCHUNK 3-jaw chuck, 12-position tool turret, chip conveyor, steel cabinet, double-door, contents: various tool holders, approx. 60 pieces, partially equipped Kodpeyciuzefx Ad Nowt

Year of construction: 2018, condition: excellent (used), Hardly used at all. Installation dimensions (L,W,H) mm: 7,023 x 3,337 x 2,480 Weight: 16 t Working area Centre distance: 3,000 mm Ksdjychzmepfx Ad Njwt Cross slide diameter: 650 mm Bed diameter: 700 mm X-axis travel: -15 ... +335 mm Machine equipment A11 main spindle, 2,000 rpm, 1,200 Nm (100%) Tailstock MK5, dragged 12 x KM40 tool holders Loading hatch for automatic loading & unloading 400V, 50Hz

Year of construction: 2002, condition: used, The machine has two working axes and two service axes (2+2), Y and X. Steady rest and tailstock are motorized. Further details will follow... Kodpfoycgulox Ad Nswt

Year of construction: 2010, condition: excellent (used), SMEC lathe Year of manufacture: 2010 Control: Fanuc Max turning diameter: 300 mm Turning length: 520 mm Bar capacity: 75 mm Spindle speed: 3500 rpm Max tool speed: 5000 rpm Kwedpfx Adoybwxrj Nst Tool stations: 12

Year of construction: 2007, condition: good (used), Year of manufacture: 2007 With double turret and double spindle. Further data will follow.... Kwjdpfsybcfdjx Ad Nst

Year of construction: 2007, operating hours: 70 h, condition: like new (used), functionality: fully functional, The lathe has only 70 machining hours. It is like new. No alarms. The only reason for sale is upgrading to a larger lathe. Contact me for the best offer. This lathe comes from a reputable educational institution with instructors who maintain the machines. The lathe has NO issues, NO alarms. Brand: Haas Type: CNC lathe Control: CNC Year of manufacture: 2007 Max. spindle speed: 2,000 rpm Turning diameter: 40 cm Swing: 50 cm Kedpfxsya Nhio Ad Njwt Model: TL-1 MPN: TL-1 Machining length: 762 mm Power: 12 hp

Condition: ready for operation (used), A high-precision lathe Weiler is available. Center height: 155mm, distance between centers: 800mm, speed: 2800rpm, spindle bore: 36mm. Machine dimensions X/Y/Z: approx. 1800mm/800mm/1500mm, weight: approx. 900kg. Documentation available. On-site inspection is possible. Kwjdpfx Adsya Hxxj Njt

Condition: ready for operation (used), Year of construction: 2013, Immediately available from university: L & Z Lathe Eagle Type LC 340 Year of manufacture: 2013 Centre height: 170 mm Swing over bed: 340 mm Swing over cross slide: 205 mm Turning length: 1000 mm Spindle bore: 38 mm Drive: 1.5 kW Spindle speeds: 60 – 2000 rpm Tailstock quill: 40 mm Chuck: 160 mm Faceplate: 200 mm Four-way toolpost Weight: 2 t Price: EUR 3,500.— plus VAT, ex location. Ksdpfeyayflex Ad Nswt

Year of construction: 2008, condition: ready for operation (used), Swing diameter: 750mm, turning diameter: 550mm, max. turning height: 500mm, max. workpiece weight: 1200kg, speed: 2000rpm, spindle power: 16.4kW, chuck diameter: 533mm, tool stations: 10, weight: approx. 10600kg. Documentation available. An on-site inspection is possible. Kwedpfx Ajyarqyed Net

Condition: ready for operation (used), A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible. Kwedpfsyarqgsx Ad Not

Year of construction: 2007, condition: ready for operation (used), A CNC large-format vertical turning lathe You Ji is available. Turning diameter: 1000mm, turning height: 600mm, table diameter: 630mm, max. workpiece weight: 1800kg, chuck diameter: 24inch, travel X/Z: 800mm/650mm, speed: 2400rpm, power: 25kW, tool positions: 6. Machine dimensions X/Y/Z: approx. 4000mm/2100mm/3350mm, weight: approx. 14000kg. The machine must be partially dismantled during disassembly, as it would otherwise not fit through the gate. Documentation vorhanden. An on-site inspection is possible. Kjdpoyarq Hsfx Ad Njwt

Year of construction: 1980, condition: used, Schaublin 102N lathe Kwjdpfjyacuvsx Ad Njt

Year of construction: 1980, condition: ready for operation (used), Center height: 180mm, swing diameter over bed/cross slide: 360mm/190mm, distance between centers: 750mm, speed: 1250rpm, machine dimensions X/Y/Z: approx. 2800mm/1000mm/1300mm, weight: approx. 1750kg. An on-site inspection is possible. Kodoyab I Ijpfx Ad Newt

Year of construction: 2017, condition: excellent (used), 4 CNC lathes including automation and tooling. Year of manufacture: 2017, 2012, 2010, and 2008 Kedpfx Adjyaa Nws Nswt

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Kodpsx Uq Uhjfx Ad Newt

Year of construction: 2004, condition: ready for operation (used), A horizontal bed cycle lathe DMT with extensive accessories is available. Turning diameter over bed/cross slide: 650mm/400mm, max. turning length: 1500mm, travel X/Z: 440mm/1500mm, speed: 2000rpm, spindle bore: 106mm, spindle bearing diameter: 150mm, rapid traverse X/Z: 5m/10m/min, tailstock quill diameter: 100mm, tailstock quill stroke: 200mm, tailstock taper: MT5. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2300mm, weight: approx. 5000kg. Documentation available. On-site inspection is possible. Kwsdpfxjx Uq Ube Ad Nst

Year of construction: 1995, condition: ready for operation (used), Travel X/Z: 180mm/510mm, max. turning length: 500mm, max. turning diameter over bed/face slide: 440mm/254mm, spindle speed: 3600rpm, bore: 70mm, tool stations: 8, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/1800mm, weight: approx. 4300kg, controls: Siemens Sinumerik. Including collet and jaw chuck. Documentation available. On-site inspection is possible. Expected to be available from April 2026. Kodpfx Aox Tum Ejd Nswt

Year of construction: 1992, condition: ready for operation (used), Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible. Kedpfox Tum Sox Ad Newt

Condition: good (used), Year of construction: 1998, ZMM Sliven - CU 1000 steady rest Kodpfxsx Ttfao Ad Nswt

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Kodpfx Adox Tp Dxj Nowt Height:1200mm Weight:290kg

Year of construction: 1968, condition: ready for operation (used), Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement. Kodpex Th Ngofx Ad Nowt

Year of construction: 2008, condition: ready for operation (used), Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls smaller 120mm and CNC singulation for balls larger 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement. Kwjdpfx Asx Th Nmsd Njt