Rosskopf + Partner AG

Condition: new, functionality: fully functional, mileage: 4 km, power: 45 kW (61.18 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2025, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-5 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains. Nsdpfx Ahjzwm Elskjda

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 605612/01, total height: 4,900 mm, total length: 6,000 mm, load capacity: 1,250 kg, Equipment: documentation/manual, Column crane with 6-meter reach - 1250 kg capacity. Ndsdpfx Ahozwm Efjkja

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,159 h, pressing force: 229 t, total width: 2,788 mm, total height: 3,310 mm, overall weight: 21,800 kg, product length (max.): 5,475 mm, Press brake manufactured in 2007. This Bystronic Hammerle 225 3P 4100 features a pressing force of 2250 kN and a bending length of 4100 mm. The machine includes hydraulic die and punch clamping systems, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the Bystronic Hammerle 225 3P 4100 machine we have for sale. Contact us for further details regarding this machine. • Note: Nameplate shows 3100 mm, but seller confirms 225/410 configuration (4100 mm) • Machine structure: • Distance between uprights: 4200 mm • Throat depth: 250 mm • Standard installation height: 917 mm • Standard stroke: 400 mm • Ram thickness: 80 mm Nedpfx Aszwm D Ishksda • Below-floor installation: No • Table: • Working height with WZ 86 mm tooling: 1056 mm • Table width: 93 / 108 mm • Table height: 130 mm • Lower beam thickness: 160 mm • Movements: • Max approach speed: 150 mm/s • Max working speed: 10 mm/s • Max return speed: 150 mm/s • Y-axis tolerance: ±5 µm • Clamping system: Hydraulic die clamping (standard), Hydraulic punch clamping (standard) • Electrical / Utilities: • Connected load: 40 kW • Operating voltage: 400 / 480 V AC • Frequency: 50 / 60 Hz • Rated slow-blow pre-fuse: 80 A • Hydraulic oil: 600 l • Compressed air: 0.6 MPa • Condition: Machine operational Additional equipment • Bending aids: • Right bending aid (operational) • Left bending aid (installed, not operational) • Tooling package (Hämmerle): • Straight upper tooling, code 001-005: approx. 5,410 mm total • Gooseneck upper tooling, code 014-005: approx. 2,905 mm total • Bottom die set, code 007.20-02: approx. 4,735 mm total • Bottom die set, code 013.00-03: approx. 4,825 mm total • Bottom die set, code 016.10-01: approx. 3,225 mm total • Tooling suitable for various bending applications and material thicknesses Technical Specification Bending Length 4100 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,500 h, load capacity: 3,000 kg, lifting height: 3,450 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,650 mm, fork length: 2,000 mm, Equipment: 3rd hydraulic function, CE marking, UVV, cabin, sideshift, Forklift with front-mounted side shift 2 x LED work lights at the front Ndjdpfezwm Dzsx Ahkoa 1 x LED reversing light at the rear Comfortable driver's seat Single-pedal operation Blue Spot lights at the front and rear MABO Forklift Service GmbH offers: * Purchase and rental of new and used forklifts or warehouse technology * Purchase of warehouse technology or forklifts * Comprehensive service – on-site or in the workshop * Training courses for forklift operators

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, overall weight: 250 kg, coolant pump power: 1 W, working width: 80 mm, grinding wheel diameter: 125 mm, number of planer blades: 5, input voltage: 400 V, type of input current: three-phase, operating speed: 15 mm/s, grinding length: 630 mm, warranty duration: 12 months, input current: 2 A, spindle speed (max.): 3,000 rpm, spindle speed (min.): 3,000 rpm, input frequency: 50 Hz, spindle height adjustment: 125 mm, AUTOMATIC PLANING KNIFE GRINDING MACHINE Knife Grinding Length is 630 mm AVB-PGM630 is specially designed to grind the planer knives up to 630 mm in length for wood, metal, and paper industries. It is constructed with a linear rail block system for high efficiency and long life. Knives mounted on the plate could be rotated +/- 90 degrees. Also, complete with its multiple knife mounting attachment, it is possible to grind at most five pieces of planer knives at one time. There are 11 various speeds up to 11 mt/min with a microprocessor control coolant ready system. AVB-630PGM AUTOMATIC PLANER KNIFE GRINDER Equipped with a CNC linear Bearing system AVB-630PGM is specially designed for grinding the planer knives up to 60 cm in length. Complete with a multiple knife mounting attachment system. It is possible to grind at most five pieces of planer knives at one time. GENERAL FEATURES • Automatic planer knife grinding up to 600 mm • Speed control between 0-11 Mt/min. • Mechanical knife attachment Nedpfozwm Duox Ahkeda • Microprocessor Controlled • Grinding Head riding on linear rails • High precision of 0,02 mm infeed amount • Non-corroding and hardening plating on all mechanical components • CNC bearing system extends machine lifetime and enhances the grinding quality • Possibility to attach a maximum of 5 pieces of blades on the same plate • Rigid machine base • Production confirmed with CE standards TECHNICAL SPECIFICATIONS • Grinding Length 600 mm • Plate dimensions 60*80*600mm • Grinding Wheel Diameter Ø100/150mm • Motor Quantity 3 • Grinding Speed 0-11m/min. • Automatic Infeed 0,02mm • Operating Voltage 380 V ,50-60 Hz, 3 Phase • Coolant Tank Capacity ͠ 30 Lt. • Net/Gross Weight 430/450 kg • Dimensions 60*160*140 cm MOTORS on THE MACHINE Grinding Wheel • Grinding Wheel 1,1 KW- 2800 rpm D:Ø100/150 mm • Coolant 0,09KW-2800 rpm d:Ø20 mm • Grinding head horizontal movement 0,37KW-2800 rpm H:60-80mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: RR500FB, conveyor belt length: 5,000 mm, conveyor belt speed: 800 mm/s, total length: 5,250 mm, total width: 1,250 mm, total height: 1,900 mm, overall weight: 105 kg, discharge height: 1,900 mm, power: 0.37 kW (0.50 HP), input voltage: 230 V, input frequency: 50 Hz, input current: 16 A, SCHORR Firewood Conveyor Belt, Electric, 5m, 230V Directly from the splitter to the trailer Anyone who makes firewood knows the time-consuming task: it's not the splitting that strains your back, but the bending, collecting, and throwing afterward. The electric SCHORR conveyor belt takes over precisely this step: the logs fall directly from the splitter onto the belt or are simply placed on it unsorted; the cleats and the conveying trough safely guide them upwards, and in the end, they end up where they belong: on the trailer, in the container, or in the grid box. With a belt speed of 0.8 m/s, the belt easily keeps pace with the splitter and saw. You continue working at your own pace, and the belt clears away behind you: stacking instead of hauling. 5 meters in length, up to 1.9 meters discharge height Five meters of conveying distance and a discharge height of up to 1.9 meters: this allows you to fill high sideboards, grid boxes, and containers without lifting a single log by hand. The installation angle can be used up to a 19° inclination, and up to 100 kg can be placed on the belt at the same time. The trough-shaped conveying trough (390 mm wide at the top) keeps the logs in line, and the cleats reliably carry them along, even uphill. And the belt can be set up quickly: you can easily pull it to the next work location using the two wheels, and you can adjust the discharge height using the height-adjustable support stand. This ensures a continuous supply of logs, from the first to the last log of the load. Socket instead of high voltage The 370-W electric motor runs on any standard 230-V socket: no high-voltage connection, no gasoline, no noise, no exhaust fumes. This means that the conveyor belt can also be used in the hall, barn, or at the house connection, where internal combustion engines and 400-V devices would be unsuitable. The technology behind it is deliberately kept simple: robust PVC belt, solid frame construction, few wear parts, easy to maintain and repair. And if something does happen: wear and spare parts are in stock, and we carry out repairs in our own workshop. You buy directly from the manufacturer and receive personal advice. Technical data Nedpfx Ahozwm Dnjksda Manufacturer: SCHORR Model: RR500FB Type: Belt conveyor with cleats Drive: Electric, 230 V / 50 Hz Motor power: 370 W Conveying length: 5000 mm Max. discharge height: 1900 mm Max. inclination: 19° Max. belt load: 100 kg Belt speed: 0.8 m/s Belt: PVC, 100 mm wide Cleat height: 30 mm Conveying trough (top / bottom): 390 / 104 mm Switch: 230 V, 16 A Cable length: 1,850 mm Dimensions (L × W × H): 5,250 × 1,250 × 1,900 mm Weight: 105 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in fully functional condition, ideal for bakeries, pizzerias, pastry shops or large gastro operations. Thanks to the design with simultaneous rotation of the bowl and spiral, the dough does not overheat and develops gluten perfectly. Technical parameters: Maximum dough capacity: 80 kg Bathroom volume (bowl): 127 liters Ndedpfx Aozwm Dhshksa Minimum mixing: approx. 6 kg Power supply: 3 x 400 V (three-phase current) Safety: Protective cover with safety microswitch (the machine stops immediately when lifted).

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 15,000 rpm, overall weight: 2,000 kg, spindle motor power: 21,000 W, CNC Portal Vertical Machining Center DEPO Type DEPOCUT 2012 Year of manufacture 2000 Heidenhain TNC 430 Electronic handwheel Table 2300 x 1600 mm Travel distances X / Y / Z 2200 / 1200 / 800 mm Max. table load 12 tons Tool holder SK 40 Tool changer, 12 positions Spindle speeds 30 - 15,000 rpm Minimum quantity lubrication Spindle drive 21 kW Machine weight 20 tons Njdpfxjzwm A Dj Ahkoda Weiss spindle overhauled, spindle operating hours since overhaul 1352h Machine is still in operation Dismantling and transport must be carried out by the buyer.

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Workpiece capacity Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel of X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel of Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swiveling range: -45° to +225° Swiveling time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 m/s (corundum) / 80 m/s (CBN) Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution, measuring system: 0.001° Circularity accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill travel: 50 mm / 80 mm Quill diameter: 60 mm Ndjdpfx Ahozwm Akokea Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range: Ø 20–Ø 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS Control system CNC control: Bosch Rexroth MTX EQUIPMENT 3-point steady rest

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115687, Usable cutting length: 6000 mm Controllable axes: 3 Nsdpfozwm Adjx Ahksda Saw blade diameter: 550 mm Internal miter angle, electronic: 90° to 45° External miter angle, electronic: 90° to 15° Saw blade motor power: 2 x 2.64 kW Positioning speed, X-axis: 25 m/min Saw blade feed: Hydropneumatic Profile clamping: Pneumatic clamping devices Position measurement: Absolute magnetic measuring system Label printer with dispenser: Printing speed 60 mm/s Electrical connection: 400V / 3PH / 50Hz Total power: 7.5 kW Compressed air supply: Approx. 7 bar Weight: 1640 kg

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle Spindle speed range: 170–18,000 rpm Workpiece data Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above workpiece table: 200 mm (300 mm) Center height above grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding traverse speed: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding traverse speed: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head B-axis Swiveling range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Travel speed: 5 m/min MACHINE DETAILS Year of manufacture: 1988 Control system: Siemens Sinumerik 840D Solutionline Control system upgrade: 2014 Ndodpfx Aszwmz Tehkea Control system overhaul: 2016 Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m EQUIPMENT

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 13137, Capacity: approx. 50-56 kg/h (depending on the dough, filling, etc.) Overhaul year: 2026 – new electronics, housings, insulation, gas reducer, all bearings + motors are new or refurbished. Model: EWB 2/2 Two dough belts. Set including a dough tank and pumps – stepless speed control via a frequency inverter. Power source: CNG/LPG 50 Hz, power: 5.3 kW Nedozwmz Hjpfx Ahkeda

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Work Area Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm Ndedpezwmztsfx Ahkja Control System Control system: Siemens 840D C-axis: yes C-axis speed range: 0–20 rpm Tool System Number of tools: 12 Powered tools: 6 Spindle Spindle bore: 103 mm Main spindle head size: 8 Main Drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50% Speed range: 30–3,000 min⁻¹ MACHINE DETAILS No further information available EQUIPMENT Power chuck Forkardt 3 NHF 315-82 A8 Centrifugal force compensation Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Hard, ground top jaws Maximum bar diameter: 63 mm Draw tube Mounting for power chuck

Condition: used, mileage: 26,000 km, power: 195 kW (265.13 HP), first registration: 06/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro5, suspension: steel, total length: 7,000 mm, total width: 2,450 mm, total height: 3,100 mm, permissible axle load (axle 1): 5,800 kg, permissible axle load (axle 2): 10,900 kg, Year of construction: 2012, Equipment: ABS, AdBlue, EBS, differential lock, electric window regulation, power assisted steering, trailer coupling, = Additional options and accessories = - Leaf spring suspension - High beam headlights - Air horn - Radio/CD player - Rotating beacon - Sun visor - Power take-off (PTO) - Central lubrication system = Further information = General information Cab: double Technical information Number of cylinders: 6 Engine displacement: 7,146 cc Axle configuration Suspension: leaf spring suspension Front axle: Max. axle load: 5,800 kg; tire tread depth left: 90%; tire tread depth right: 90% Rear axle: dual tires; differential lock; Max. axle load: 10,900 kg; tire tread depth left (inside): 90%; tire tread depth left (outside): 90%; tire tread depth right (inside): 90%; tire tread depth right (outside): 90% Weights Unladen weight: 5,175 kg Payload: 10,825 kg GVWR: 16,000 kg Maintenance, history and condition APK (technical inspection): valid until 04.2027 Technical condition: very good Optical condition: very good Ndodpfozwmzgox Ahkja

Condition: used, mileage: 27,500 km, power: 195 kW (265.13 HP), first registration: 12/2009, fuel type: diesel, tire size: 285-70-19,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro5, suspension: steel, total length: 7,000 mm, total width: 2,450 mm, total height: 3,050 mm, permissible axle load (axle 1): 5,800 kg, permissible axle load (axle 2): 10,900 kg, Year of construction: 2009, Equipment: ABS, electric window regulation, = Additional Options and Accessories = - Leaf spring suspension - Power Take-Off (PTO) = Further Information = General Information Cab: double Technical Information Njdpjzwmzajfx Ahkoda Number of cylinders: 6 Engine displacement: 7,146 cc Axle Configuration Tire size: 285-70-19.5 Suspension: Leaf spring suspension Front axle: Max. axle load: 5800 kg; Tire tread depth left: 90%; Tire tread depth right: 90% Rear axle: Dual tires; Max. axle load: 10,900 kg; Tire tread depth left inner: 90%; Tire tread depth left outer: 90%; Tire tread depth right inner: 90%; Tire tread depth right outer: 90% Weights Unladen weight: 8,675 kg Payload: 7,325 kg GVW: 16,000 kg Maintenance MOT (Periodic Technical Inspection): valid until 12.2026

Year of construction: 1978, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Workpiece and Machining Data Foot cone angle: 15–55° Pitch circle diameter: 152 mm Tooth height with 21° finishing cutter: max. 10.7 mm Tooth height: max. 14.8 mm Tooth width at the tooth foot: max. 28 mm Cutter head diameter: 200 mm Cutter head diameter according to template: max. 0.21″ (?) Number of teeth range: 8–50 Indexing range: 8–50 mm (?) Machining speed: 49.7 m/min Cutter head speed: 32.6–49.7 m/min Feed rate: 2–3.1 s/tooth Workpiece Spindle Diameter of conical bore at the large end: 99 mm Clamping length: 304.8 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Countersink behind the taper: 57.2 × 77.9 mm Spindle bore diameter: 22.3 mm MACHINE DETAILS Main Drive Power of main drive motor: 7.46 kW Speed of main drive motor at 60 Hz: 1,800 1/min Speed of main drive motor at 50 Hz: 1,500 1/min Drives Speed of hydraulic motor at 60 Hz: 1,800 1/min Speed of hydraulic motor at 50 Hz: 1,500 1/min Speed of coolant pump at 60 Hz: 3,600 1/min Speed of coolant pump at 50 Hz: 3,000 1/min Speed of chip conveyor motor at 60 Hz: 1,800 1/min Speed of chip conveyor motor at 50 Hz: 1,500 1/min Ndedpfx Ahjzwmy Nskea Dimensions and Weight Footprint: 3,200 × 2,210 mm Machine weight: approx. 9,000 kg EQUIPMENT

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HS-14E, overall weight: 185 kg, total width: 135 mm, total length: 144 mm, total height: 228 mm, fuel: electricity, SCHORR Log Splitter 14t HS-14E PRO Where conventional electric splitters with 12 tons reach their limit, the HS-14E goes further: 14 tons of splitting force drive the splitting wedge through hardwood, dry and knotted logs, evenly and without jamming. The powerful hydraulic cylinder with a 9.5 cm diameter reliably delivers the pressure, stroke by stroke. Splitting is done vertically with a splitting length of up to 104 cm: meter-long logs fit with room to spare, as do shorter sections from 56 cm. This allows you to quickly work your way through the pile of logs, piece by piece. The most strenuous part of the splitting process is not the splitting itself, but lifting the logs. The HS-14E is equipped with an integrated log lifter specifically for this purpose: hook the log, lever it, and the section aligns itself effortlessly into the splitting position, without straining your back and shoulders. When not in use, the log lifter serves as a stable protective bar on the machine. Operation is performed via the two-hand safety control, and the massive, robust design with a weight of 185 kg ensures a secure stand, even at full splitting force. Nedpfx Aozwmypohkoda The HS-14E does not require a tractor or a power take-off: the 400 V electric motor with 3.5 kW is connected to the standard 16 A socket and delivers its power quietly and without emissions. This allows you to split wood in the barn, in the hall, or on the farm, where gasoline engines would be disruptive and a tractor is not available. The technology is deliberately kept simple, robust, and repairable: hydraulics, steel frame, electric motor – no unnecessary frills. The HS-14E is delivered pre-assembled and with hydraulic oil already filled: simply connect it and start splitting. Wear and replacement parts are in stock, and we handle repairs in our own workshop. You buy directly from the manufacturer and receive personal advice. And for those who want to combine a power take-off and electric power, the HS-22PE with 22 tons is the larger model. Technical data -- Manufacturer: SCHORR -- Type: HS-14PE -- Splitting force: 14 t -- Weight: 185 kg -- Drive: 400 V electric motor (3.5 kW, 16 A) Dimensions: -- Length: 1440 mm -- Width: 1350 mm -- Height: 2280 mm -- Splitting wedge: 17.5 cm -- Splitting diameter: max. 30 cm / min. 10 cm Your advantages at a glance -- Ready for immediate use – no long waiting time -- Massive design – 185 kg weight for maximum stability -- Comfortable log lifter for heavy wood -- Spare parts always available -- Competent service & advice Whether delivery or collection in 48465 Schüttorf – we offer the right solution.

Year of construction: 1991, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Machining Range Njdszwmyispfx Ahkeda Largest module that can be milled with hob cutters according to DIN 8002: 4.5 mm Largest module that can be milled for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece Data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling Cutter Data Milling cutter diameter: 40–102 mm Milling cutter length: max. 230 mm Radial front diameter (standard): 16–32 mm Travel Ranges Axial slide travel / largest milling length Z-axis: 300 mm Radial slide travel X-axis: 140 mm Milling slide travel Y-axis: 100 mm Tailstock travel W-axis: 420 mm Swivel angle of end mill head A-axis (left): 50° Swivel angle of end mill head A-axis (right): 60° Milling Coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (face of milling spindle): 50–230 mm W-axis (face of tailstock spindle): 165–585 mm Spindle Speeds Milling cutter spindle speed B-axis: 0–1,500 min⁻¹ Workpiece spindle speed C-axis: 0–350 min⁻¹ Feed Rates Feed rate X-axis: 3,500 mm/min Feed rate Z-axis: 3,500 mm/min Feed rate Y-axis: 4,000 mm/min Feed rate W-axis: 5,500 mm/min Feed rate V-axis (portal loader): 80,000 mm/min MACHINE DETAILS Year of manufacture: 1991

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Control System Control: Heidenhain iTNC 430 Working Area X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 Electrical Data Operating voltage: 400 V Control voltage: 24 V MACHINE DETAILS Machine Data Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Ndsdezwmx Sepfx Ahksa Documentation Heidenhain programming manual Machine vise Clamping jaws

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 570602, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, controller model: Siemens Sinumerik 840 C, swivel angle A-axis (min.): -170 °, swivel angle A-axis (max.): 170 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 300 mm Nodpfx Ajzwmx Ejhkoda Travel range, Y-axis: 400 mm A-axis: -170° to +170° X-axis speed: 0.1–5,000 mm/s Y-axis speed: 0.1–5,000 mm/s Workpiece diameter with 1:10 reduction ratio: 300 mm Workpiece diameter with 1:1 reduction ratio: 212 mm Maximum number of teeth: 200 Minimum number of teeth: 6 MACHINE DETAILS Control system: Siemens Sinumerik 840 C Total power requirement: 38 kW Dimensions & Weight Space requirement: approx. 4,200 × 2,200 × 2,100 mm Machine weight: approx. 10,000 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 2,500 m³/h, intake vacuum (max.): 22 mbar, intake manifold diameter: 140 mm, filter area: 10 m², total height: 1,940 mm, total length: 1,040 mm, total width: 898 mm, overall weight: 210 kg, Equipment: CE marking, For sale is a used Felder clean air extraction unit RL 140, manufactured in 2023. This compact and powerful extraction system ensures clean air conditions in the workshop and is ideally suited for use with panel saws, planers, milling machines, and other woodworking machines. Thanks to the H3-certified clean air system, a residual dust content of less than 0.1 mg/m³ is achieved. The unit is in good condition and is ready for immediate use. The fan wheel, which is located on the clean air side, prevents dust from escaping and ensures a high level of operational safety. Equipment: • Clean air extraction system with H3 certification Ndsdpfxszwmxxj Ahkea • Manual filter shaker • Large 200-liter chip container • Compact design • High extraction performance with minimal space requirements • Ideal for professional woodworking shops • Nominal air flow rate: 1,108 m³/h • Residual dust content: < 0.1 mg/m³ (H3 certified)

Condition: good (used), Year of construction: 2006, functionality: fully functional, Tank volume: 60 liters and 30 liters Motor power: 1.9 kW Power supply: 3 x 400 V (three-phase current). Speed: Continuous mechanical regulation (variator) in the range of approximately 53 to 288 rpm. Nedpfx Ahozwmxlskjda

Condition: used, Safop Leonard-90TT/CNC horizontal axis turning lathe Model Leonard-90TT/CNC 70 ton capacity 1750mm swing Nodezwmw Uspfx Ahksda 9000mm between centres Twin saddle Hydrostatic bed 1700mm diameter 8-jaw chuck Siemens Sinumerik 840 DSL controls Date of manufacture: 2013 Serial No. 3432 Swarf conveyor Safety enclosure Quantity of tooling Euro cold twin fan chiller

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 342, type of input current: three-phase, power: 1,141 kW (1,551.33 HP), Tamglass furnace with convection, model HTF 2442. Ndodpfezwmw Iex Ahkea

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, cutting height (max.): 104 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, milling spindle length: 30 mm, table length: 1,300 mm, input voltage: 400 V, input frequency: 50 Hz, For sale is a high-quality Felder KF 700 S Professional from the year 2023. This combination circular saw and routing machine combines two full-fledged professional machines into a space-saving unit and impresses with its high precision, robust construction, and proven Felder quality. The machine is in well-maintained used condition and is ready for immediate use. Thanks to the precise X-Roll format sliding table, the pivoting routing spindle, and the powerful 5.5 kW motor, the KF 700 S Professional is ideally suited for carpentry shops, joineries, furniture manufacturing, and professional interior finishing. Equipment: • X-Roll precision format sliding table • Pivoting circular saw unit • Pivoting routing spindle • Routing spindle quick-change system • Extension table with rip fence • Professional Felder equipment • Dust extraction connections for sawing and routing operations Ndedpfx Ahszwmwhskea • Saw blade pivotable: 90° to 45° • Format sliding table: 2,500 mm • Rip fence: 2,600 mm • Routing spindle pivotable: 90° to 45° • Routing spindle Ø: 30 mm • Routing table opening: 230 mm • Routing tool Ø max.: 230 mm Special equipment: • 008 7.5 HP motor • 010 Star-delta starter • 014 3-phase CEE socket for additional equipment • 139 On/off switch on the sliding table • 082 Preparation for adjustable slot tool • 071 Angle indicator for circular saw pivoting on the handwheel • 081 Circular saw blade guard, pivotable • 085 Electronic digital display on the circular saw fence with fine adjustment • 103 Routing spindle 30 mm, 115 mm usable height above the table • 110 Angle indicator for routing spindle pivoting on the handwheel • 161 Extension table 1500 for sliding table • 173 Angle grid index system for extension rip fence