CHZ-Blechtechnik GmbH

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, working width: 1,500 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, power: 7.5 kW (10.20 HP), overall weight: 3,500 kg, total length: 2,200 mm, total width: 1,800 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Hydraulic Guillotine Shear / Sheet Metal Shear Haco SST 150 / 4, year of manufacture 2006, Nsdpfxeydfhmo Ah Hswb Technical data and features: Cutting capacity 1500 mm x 4 mm, machine length 2200 mm, width 1800 mm, weight 3500 kg. Torsionally rigid, fully welded steel frame, stainless steel blades, stroke counter, independent hold-downs, cutting line illumination, softly padded hydraulic hold-downs. Option to increase cutting speed by reducing capacity, pre-selection control for positioning the backgauge to the desired position, 1-meter angle stop with T-slot scale and a swivel stop, complete cutting table with T-slots at 1500 mm and 2000 mm, motorized swiveling backgauge with adjustment via front control panel, 650 mm stroke, etc. The machine comes from a government institution and is in top condition! Please see the photos! The machine is incoming, more photos will follow.

Condition: good (used), functionality: fully functional, Year of construction: 1978, control type: manual, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 999 mm, power: 11 kW (14.96 HP), input voltage: 400 V, Equipment: emergency stop, finger protection, foot remote control, safety light barrier, Darley 3100 x 4 mm hydraulic shear. Newly sharpened blades. Electric back gauge. Loadable onto a standard Euro trailer. Transport can be arranged. Weight approx. 6000 kg. Njdpsya U Sajfx Ah Howb

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Nwodpfxjyayg Aj Ah Hsb Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: used, Year of construction: 1999, weight of the machine ca. 16 t Njdpex U A Hvofx Ah Hewb sheet width 3150 mm sheet thickness - max. 16 mm sheet width - min. 1,6 mm voltage 400 V range - high tensile 3950x2475x2520 mm

Condition: good (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 7106, working width: 3,000 mm, sheet thickness (max.): 4 mm, Equipment: type plate available, hydraulic swing beam shear HERA TS 3000x4 with feed unit Nsdpfsx Td Aiex Ah Hjwb Year of manufacture: 2002

Condition: used, Year of construction: 1974, total length: 4,000 mm, total width: 2,000 mm, total height: 1,600 mm, Weight: 4.000 kg - Year: 1974 - Documentation available: No - CE certificate present: No - Serial number: 4500 - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 4 - Max. working width [mm]: 3100 - Backgauge depth [mm]: 1300 Nedpjx Rymxofx Ah Hewb - Transport dimensions: 4000mm x 2000mm x 1600mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Manufacturer: DIGÉP Nsdpjx H Rzrefx Ah Howb Model: DLB 7/2550

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. Nodpfxjx Da D Ue Ah Howb If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Nsdpfx Ahsx A S D Do Hswb Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, functionality: fully functional, Year of construction: 1997, Used Safan guillotine shear Nwodpfx Ajxzf Sljh Heb Type: VS 255 4 Capacity: 2550 x 4 mm Electrically adjustable backgauge Manual adjustment of cutting angle and blade gap

Condition: good (used), functionality: fully functional, Year of construction: 1998, working width: 4,000 mm, Used Fasti press brake 200 ton x 4000 mm, year 1998, with extensive tooling. Hydraulic clamping of the upper tool – Delem control – 6-axis. Nodexr Aynopfx Ah Hswb

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks Nsdpfxoxrgv Ts Ah Hjwb

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Type: VS 255 4 Capacity: 2550 x 4 mm Electric back gauge with NC control Nwjdpfx Asxrf Hwsh Heb

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw Nwsdpfx Ahjxn Tx He Hjb - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Manufacturer: LVD Company, Gullegem (Belgium) Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Dimensions: approx. 4000 × 1800 × 1600 mm Nsdpsxmvl Tsfx Ah Hswb LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm.

Condition: excellent (used), Year of construction: 2001, In goed werkende staat verkerende gebruikte 3 meter plaatschaar van Safan. Nwsdoxlf Inspfx Ah Hob Type: HT 310x4 Capaciteit: 3100 x 4 mm Touch screen besturing Automatische plaatdikte en hoek instelling

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: SO151002, sheet thickness (max.): 3 mm, warranty duration: 36 months, cutting length (max.): 1,500 mm, lateral stop: 1,000 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Electric guillotine shear ShearOne E1500x3 CoastOne - Made in Finland Electric guillotine shear ShearOne 15 - Made in Finland 1500mm x 3mm TC15 touchscreen control - Sheet metal holding - Automatic cutting gap adjustment Nwsdpjxd U D Ajfx Ah Hjb

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm Nwjdpoxab Tvofx Ah Hob cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min Nodpoxabvqofx Ah Hjwb cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms Nwodpfx Ahjxabd Uo Hsb - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Nwsdpfxoxaa I Se Ah Hsb Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, working width: 6,500 mm, sheet thickness (max.): 3 mm, overall weight: 15,000 kg, TECHNICAL DETAILS Sheet width: 6500 mm Sheet thickness: 3 mm Back gauge – adjustable: 1000 mm MACHINE DETAILS Weight: approx. 15,000 kg Dimensions: 7500 x 3000 x 2500 mm Nodpfx Ahsw Suxko Howb EQUIPMENT - 1 x set of knives

Condition: good (used), functionality: fully functional, Year of construction: 1983, We are selling a used guillotine shear from the manufacturer Digep DLB 4 3050. The machine is fully operational, connected to power, and fitted with sharp blades. Technical specifications: - Sheet thickness: 4 mm Nodjw Rdzlepfx Ah Howb - Sheet width: 3050 mm - Machine dimensions: 3.7 x 2.1 x 1.4 m - Machine weight: approx. 4.65 t The price is ex works loaded at the location in Werdau.

Condition: used, Max. cutting length: 4040 mm Njdpfxow Hygdo Ah Hewb Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal holding Side stops and table extensions cutting length limitation Cutting edge lighting Weight approx. 7500 kg

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Your Maschinen Besmann Team Nwodpfx Ahjw Eipro Hob We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Motor power: 5,5 KW Weight: approx. 3300 kg