Püttmer GmbH

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Kjdoy Tx Nqjpfx Agtedl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: chip conveyor, documentation/manual, 5-AXIS MACHINING CENTER DMG MORI HSC 70 LINEAR, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 640 Kedsy Tv R Eopfx Agtodl ELECTRONIC HANDWHEEL TRAVELS X 885 Y 600 Z 450 B +20º/-110º C n x 360º SPINDLE AT 18,000 RPM, 15 KW, HSK-A63 TABLE DIAMETER 600 MM 30-TOOL ATC (AUTOMATIC TOOL CHANGER) INTERNAL COOLANT AT 40 BARS LASER PROBE, BLUM PART MEASUREMENT PROBE, DMG TS649 CHIP CONVEYOR

Condition: used, Year of construction: 2001, total height: 2,800 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 6,500 kg, Mikron HSM 400 is a high-precision, high-speed machining center STEP TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40Spindle hours: 26897 hManufacturer: Step-Tec AG (Switzerland)Spindle type: HVC140-SB-10-15/42-3F-HSK-E40Tool interface: HSK-E40Maximum spindle speed: 42,000 rpmPower: 13 kW (40% duty cycle), 10 kW (100% duty cycle)Torque: 4.25 Nm (40% duty cycle), 3.2 Nm (100% duty cycle)Lubrication: oil-air lubrication systemAxis Drives and DynamicsDrive system: AC servo motors with ball screw drivesFeed rate (X/Y/Z): 0 – 40 m/minAcceleration (X/Y/Z): 1 g (10 m/s²)Rotary Axis PerformanceB-axis speed: up to 54,000 °/minC-axis speed: up to 90,000 °/minTool SystemTool interface: HSK-E40Tool magazine capacities: 18 / 36 / 68 tools depending on configurationTool change time: approx. 10 secondsChip-to-chip time: approx. 12.5 secondsPallet and Clamping SystemErowa UPC pallet system: 320 × 320 mmWorkpiece DataMaximum workpiece weight: up to 200 kgMachine ApplicationThe Mikron HSM 400 is designed for high-precision machining of complex components and is widely used in toolmaking, mold manufacturing, medical technology, micro-machining and high-end precision engineering where surface quality and dimensional accuracy are critical. Travel Z-axis: 350 - mm Travel X-axis: 400 - mm Weight approx.: 6,500 kg Control: Heidenhain TNC 430 M Dimensions (LxWxH) approx.: 2300 x 2400 x 2800 mm Travel Y-axis: 240 - mm Year of construction: 2,001 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No Kdjdpfx Asy Tkdyogtsl

Condition: used, Year of construction: 2007, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, overall weight: 8,300 kg, Mikron HSM 800 – High Speed Machining CenterYear 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changerHigh-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production.Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation.The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine.Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H).Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process stability and thermal accuracy. Weight approx.: 8,300 kg Control: Heidenhain iTNC 530 Dimensions of the clamping surface: 900 x 600 mm Kodjy Tkc Aspfx Agtedl Travel Y-axis: 600 - mm Dimensions (LxWxH) approx.: 3000 x 2500 x 2800 mm Travel Z-axis: 500 - mm Travel X-axis: 800 - mm Year of construction: 2,007 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC-controlled machining center for 5-axis machining CNC control Control type: bwo CNC 900 C, 512 KB RAM, PC 80486, 1 GB HD Controlled axes Travel distances: 14000 x 3300 x 200 mm Units Type designation: Milling motor HSK 63F Kdjdpfoy S Hahsx Agtjl Cooling: Water cooling Power: max. 20 kW Speed range: 1000-17000 min-1 Lubrication: Grease lubrication for 2000 operating hours Tool holder: HSK 63F Type designation: Chain tool changer Number of positions: 32, of which 4 are equipped with a torque support for holding angle/probing heads Holder: HSK 63F Diameter: 90 mm / arranged 160 mm Tool length: 160 mm Workpiece cube dimensions X-axis: max. 3300 mm Y-axis: max. 14000 mm Z-axis: 200 mm A-axis: +270° rotary axis B-axis: ±98° swivel axis

Condition: new, diameter / mm Cutting (quantity) / weight / kg GMN milling spindle Spindle type: HSP 150dh-24000/9 Condition: New Kedpfx Agsy S Dp Hotedl

Condition: ready for operation (used), Year of construction: 2001, A horizontal CNC machining center Makino is available. Travel path X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. workpiece weight: 500kg, indexing: 0.001°, rapid traverse: 84m/min, feed rate: 50m/min. Machine dimensions X/Y/Z: approx. 4650mm/1950mm/2850mm, weight: approx. 8600kg, control system: Fanuc System 16iM/Makino Professional 3. Documentation available. An on-site inspection is possible. Kdodpfx Aoy S A Nrogtjl

Condition: ready for operation (used), A CNC vertical machining center Sigma is available. Travel X/Y/Z: 850mm/480mm/580mm, table dimensions X/Y: 1000mm/540mm, max. table load: 7000kg, tool positions: 40, tool holder: SK40, speed: 12000rpm, power: 15kW, torque: 15kW. Machine dimensions X/Y/Z: approx. 3900mm/2200mm/2850mm, weight: approx. 6500kg, control: Heidenhain TNC 426M, operating hours: approx. 15855h. Including chip conveyor and internal coolant supply. Documentation available. An on-site inspection is possible. Kdsdpfey S A N Eox Agtsl

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 182.012, controller model: Siemens Sinumerik 840D, total height: 2,900 mm, total length: 6,000 mm, total width: 2,700 mm, overall weight: 8,000 kg, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, This is an untested machine. Due to the partially dismantled enclosure, the machine is offered exclusively as a source of spare parts. Configuration Siemens CNC control Automatic tool changer Kdedpsy Sgb Eefx Agtjl Chip conveyor Coolant lubrication system

Condition: ready for operation (used), Year of construction: 2007, A Mazak CNC 5-axis machining center with a dual pallet changer is available. Spindle power: 22kW, speed: 10000rpm, rapid traverse: 42m/min, tool positions: 80, tool holder: SK50, coolant pressure: 70bar, control system: Mazatrol Matrix. Including CNC option package Performance, preparation for Monitoring System B, Mayfran Consep 2000 chip conveyor and tool length measuring device. Documentation available. An on-site inspection is possible. Kodpfxsy R Dt Ae Agtsdl

Condition: like new (used), Year of construction: 2020, Front lathe with multi-tool turret, Siemens control (4 units available) Kjdey Ivffepfx Agtsdl

Condition: ready for operation (used), Year of construction: 2006, A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible. Kjdpfx Agsy Igbqetedl

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Ksdpfoy H I H Ssx Agtedl

Condition: ready for operation (used), Year of construction: 2002, A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible. Kjdpoy H I Euofx Agtedl

Condition: ready for operation (used), Year of construction: 1997, Travel X/Y/Z: 1600mm/400mm/350mm, quill stroke: 350mm, max. workpiece weight: 2100kg, table dimensions X/Y: 2100mm/430mm, table height: 908mm, tool positions: 78, tool holder: SK40, max. torque: 70Nm, rapid traverse: 30m/min, feed force: 7kN. Machine dimensions X/Y/Z: approx. 4700mm/2950mm/2700mm, weight: approx. 9300kg, control: Siemens 840C. The spindle of the machine must be overhauled and was removed as well. Documentation available. An on-site inspection is possible. Kdodpfx Ajy E S Ecegtsl

Condition: ready for operation (used), Year of construction: 2007, A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production line has all necessary peripheral equipment such as filter systems, chip conveyors and coolant supply systems from the manufacturers Knoll and Hyfra. Documentation available. An on-site inspection is possible. Kdsdpfx Aoy Ey Tuogtel

Condition: good (used), Year of construction: 2007, Year of manufacture: 2007 Spindle hours approx. 14,000 (replaced 11/2017) Drive operating hours approx. 68,500 Traverse paths: 850x700x500 mm Rapid traverse: 45 m/min Speed: 18,000 rpm HSK 63 Tool changer with 38 stations Laser tool measurement/breakage monitoring NC tilting rotary table D=420 mm Control: Siemens 840D Internal coolant supply 80 bar Paper band filter Chip conveyor Electronic handwheel module Kedpey Er Ukjfx Agtedl Oil mist extraction Chip flushing gun Thermal compensation Heidenhain probing system

Condition: ready for operation (used), Year of construction: 2005, A 3-axis milling machine is offered. Travels X/Y/Z: 1016mm/610mm/760mm, tool changer: 24 positions, spindle: prepared for external cooling unit. Accessories: recooling unit Rehsler TAE evo M, Renishaw measuring system, inspection by appointment possible. Kjdpey A Sl Rsfx Agtodl

Condition: ready for operation (used), Year of construction: 2013, Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible. Kdedpfxjy Ant Rs Agtjl

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 Kdedpfx Aoyzxfnegtjl • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: ready for operation (used), Year of construction: 1998, Offered is a horizontal machining center (HMC). Travels X/Y/Z: 560mm/510mm/510mm, max. dynamics: 40000mm/min, spindle: 12000rpm, tool holder: MAS BT 40, tool magazine: 60 positions (chain magazine), pallet system: 2-station pallet changer, pallet size X/Y: 400mm/400mm, accessories: approx. 200 tool holders (BT 40), 2 MMI towers with 8 clamping bars, hinged belt chip conveyor, Blum laser/probe, Renishaw 3D probe, machine weight: approx. 9000kg. Inspection possible by appointment. Kdedpfx Aoyzh A Njgtol

Condition: used, Year of construction: 2012, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Siemens 840 D rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper HSK 63 Tools changer 38 fach/tools Internal cooling system 80 bar total power requirement 43 kVA weight of the machine ca. 10,6 t Kodpfxoyxy E Rj Agtodl Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Condition: good (used), MIKRON UCP 600 VARIO is a 5‑axis machining center engineered for high precision, accuracy and reliability in complex machining. Table 320×320 mm; travels X600 Y450 Z450; indexing C n x360°; head B -115/+30°. 30‑station tool magazine; tool Ø max 80 mm, length 200 mm, weight 8 kg; spindle nose HSK‑A63. Spindle stepless 0–20,000 rpm, 30 kW, 91 Nm torque. Feed 15,000 mm/min, rapid 22 m/min; power 3x400 V 50 Hz. Machine weight ~7,700 kg; dims L6820×W4800×H2540(2810) mm. Options: paper filtration, water cooler, chip conveyor, EROWA UPC table, electronic handwheel, lamp, status light. 4+5 axis revised 2023. Achieves tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine‑tool sectors. Kdedpfjyxn Nkox Agtol

Condition: excellent (used), SCHAUBLIN 51 5AX CNC is a 5-axis machining center designed for precision, high accuracy and reliability. Working capacities: X300 Y400 Z430 mm; rotary table Ø210 mm; table load V50 H75 kg; A +30/−120°, C360°. Specs: HSK‑A63, 0–20,000 rpm, spindle motor 23 kW, feed 12,000 mm/min, rapid 30 m/min; weight ≈5750 kg; size 2700×1800×2600 mm. Tool magazine 20 places, Ø 80 mm (95 mm free), length 250 mm, tool change 3 s. Accessories: coolant system, water cooler, oil mist extractor FX4000, rinsing gun. Achieves tight tolerances; sectors: watchmaking, aerospace, medical, automotive, machine tools. Kdjdoyxn Hvepfx Agtel

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Kdjdpfx Agoyxn Hcetsl