Carlstad Machinetools Ab

Condition: used, Year of construction: 2022, turning diameter 0500 mm turning length 1200 mm control 840D Siemens turret head 12 swing over bed 500 mm spindle turning speed - stepless 10- 5000 rpm spindle bore 87 mm feed - longitudinal/cross 10000 mm/min rapid travel - longitudinal/face 30 m/min dimensions 5000 x 3000 x 2300 mm total power requirement 105 KW weight of the machine ca. 12 t Godpfx Ajx Hpzwog Doca Machine with counter spindle, live tooling with C- axe and Y- axe. Machine will come with accessories.

Condition: good (used), Year of construction: 2003, Nakamura - Tome SC-450 CNC Lathe with Fanuc Series 21T CNC Control, SMW Autoblok 400mm 3 Jaw Powered Chuck, 12 Position Tool Turret, Tailstock, Swarf Conveyor, Machine Weight 5800kg. S/No. S 451105 - CE Mark Godpfsx Hkahox Ag Deca

Condition: excellent (used), Year of construction: 2013, CNC Lathe – Siemens 840 D, retrofitted by Weiler in 2013 Turning diameter: 720 mm Turning length: 2000 mm Centre height: 360 mm Spindle bore: 106 mm Speed range: 1 - 1800 rpm Tailstock quill taper: MK 6 Max. workpiece weight: 3000 kg Total power requirement: 36 kW Gcjdpfxox Hg Sgo Ag Dja Machine weight approx. 5400 kg Space requirements approx. 4200 x 2450 x 2000 mm Equipment: - Chip conveyor - Coolant system - 3-jaw chuck Ø 500 mm - MUTLI-FIX quick-change toolholder - Live centre - Steady rest - Machine lamp

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU3000EX, Power kVA: 34.2 Gcodpfxjx Hg Eyj Ag Doa

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required Gjdpjx Hdq Tofx Ag Deca - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: not inspected (used), Year of construction: 2002, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle speed (max.): 2,500 rpm, overall weight: 5,000 kg, Fagor 8055 Spindle bore 108 mm Gsdpsx E Au Isfx Ag Doca Capacity 2000 x 570 mm Steady rest

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Gcedpfox D T A Dex Ag Doa Control brand: SIEMENS Control model: SINUMERIK 802C

Condition: excellent (used), TECHNICAL SPECIFICATIONS SOMAB UNIMAB 350 CNC TEACH-IN LATHE, used MAIN SPINDLE - Max. diameter over bed: 410 mm - Max. diameter over carriage: 290 mm - Distance between centres: 550 mm - Spindle bore: 52 mm - Spindle speed: 5000 rpm Godpfx Agjx Dzg De Djca - Spindle nose: A1-6'' TAILSTOCK - Quill diameter: 72 mm - Quill stroke: 100 mm DIMENSIONS - Machine dimensions: 2020 x 1530 x H1800 mm - Machine weight: 3400 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, turning length: 1,580 mm, turning diameter: 510 mm, spindle bore: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 6 rpm, travel distance X-axis: 450 mm, travel distance Z-axis: 1,060 mm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 12 m/min, quill travel distance: 130 mm, overall weight: 6,800 kg, spindle nose: M.T. No. 5, Manufactured by Mazak (Japan) Year of manufacture 1980 CNC control: Fanuc 6T Max. swing, mm 510 Standard cutting diameter, mm 305 Distance between centers, mm 1580 Turret travel, mm: X axis 450 Z axis 1060 Hole through spindle, mm 80 Spindle center, M.T. No. 5 Spindle speed range, rpm 6...3000 Turret rapid traverse, mm/min: X axis 10000 Z axis 12000 Tailstock spindle travel, mm 130 Main drive motor, kW 22 Gcsdpfx Agsx A Tb Ds Doa Machine weight, kg 6800

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Godpfsx A R U Iox Ag Doca Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 260 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 4,000 rpm, controller model: Fanuc 18i-TB, TECHNICAL DETAILS Swing diameter over bed: 560 mm Swing diameter over cross slide: 520 mm Spindle bore: 130 mm Spindle speed: 33 rpm – 4,000 rpm X-axis travel: 260 mm Z-axis travel: 600 mm MACHINE DETAILS Control: Fanuc 18i-TB Power: 22.0 kW Gcedsx Ahlwopfx Ag Dea Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,300 x 2,900 mm Transport weight: 7,500 kg Transport packages: 4 EQUIPMENT C-axis Three-jaw chuck Facing lathe Chip conveyor Driven tools

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment value: €20,000-24,000. * 4-axis machine. * Fully independent programmable tailstock with Z-axis movement and M-code clamping. * 12-station turret, all positions powered. * C-axis. * Y-axis. * Integrated main spindle motor, 18.5 / 22 kW. * Driven tool motor, 5.5 kW. * Spindle starting torque: 620 Nm. * Integrated, beltless drive. * Main spindle nose: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. Gcodpfxsx Ab I Se Ag Dja * Kitagawa B-210 spindle chuck. * Box guideways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Max swing: 520 mm. * Max machining diameter: 380 mm. * Max machining length: 1,050 mm. * Oil chiller for spindle. * IGF OSP P200-L conversational automatic programming system. * Automatic cutting force control and tool power consumption monitoring. * Parameterized tool collision-avoidance system. * Tool life management and monitoring. * Rapid traverse rates: 20 and 25 m/min on X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw automatic tool setter arm. * Communication ports: USB, PCMCIA card, and RS-232. * Dual pedal for chuck and tailstock open/close operation. * Side-hinged chip conveyor. * Complete set of external and internal static toolholders. * Complete set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operator manual. * Weight: 6,200 kg. * Machine currently in operation. * Immediate availability unless previously sold.

Condition: used, Year of construction: 2012, DMG CTX 620 linear Turning diameter: 600 mm Gcedjxzccbepfx Ag Dsa Turning length: 2000 mm Control: Siemens 840 D powerline Main spindle speed: 2,500 rpm Total power requirement: 72 kVA Machine weight approx. 12 t

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160/1840mm mm Distance Between Centres: 800 / 1500 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Gjdpfjxxpa Isx Ag Doca Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment. Gcjdpfx Asxxpabeg Dja

Condition: new, Year of construction: 2025, 0554 mm 2000 mm Gcjdoxxb A Ujpfx Ag Doa 277 mm 104 mm 400 mm 2000 U/min D1-11 DIN 55029 95 mm 145 mm

Condition: good (used), Year of construction: 2007, 770mm Swing, 550mm max. machining diameter, 1100mm Distance between Centres, 2000rpm spindle, 116mm bar capacity, 10 station turret Gedpsxv Tf Nsfx Ag Doca 26kW spindle motor, FANUC 21iTB control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, tool setter.

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA LU 15M-1000 MM WITH BARFEEDER Gcsdpexur Nwefx Ag Dja Maximum Turning Diameter: approx. 360 mm Maximum Turning Length (Z-axis travel): approx. 1000 mm Spindle Speed: up to 4,500 rpm X-axis Travel: approx. 260 mm (≈ 10.24″) Z-axis Travel: approx. 640 mm (≈ 25.2″) Power Requirement: approx. 30 kW Machine Weight: approx. 4.8 tons Turrets: Dual turrets (example: upper turret 12 positions, lower turret 8 positions) Live Tooling (M-function): Yes, on the M version

Condition: excellent (used), Year of construction: 2017, 533mm max. machining diameter, 584mm cutting length, 3,200rpm spindle speed, 102mm bar capacity, 12 station turret, 4,000rpm milling speed, Y axis -/+ 51mm, 40Hp spindle motor, HAAS control, 254mm, 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, Magazine barfeed . Gsdpfx Agexugtko Djca

Condition: new, Year of construction: 2025, functionality: fully functional, NEWAY NL502 2 AXIS CNC LATHE WITH FANUC 0IT PLUS 3B YEAR OF MANUFACTURE - 2025 STANDARD INCLUDED FACTORY FITTED MACHINE OPTIONS  STD AIR - AIR GUN  STD CHIP - CONVEYOR SIDE HINGED WITH CHIP BOX  STD CHU - 10 INCH 3 JAW HOLLOW HYD CHUCK INC SET SOFT JAWS  STD CHU - STANDARD HYD CHUCKING CYLINDER - HOLLOW  STD CNC.OP - FANUC 0ITF 3B PLUS WITH 10.4 INCH COLOUR LCD DISPLAY & 8MB MEMORY  STD CNC.OP - MANUAL PULSE GENERATOR (MPG)  STD CS - COOLANT GUN  STD GUA - FRONT DOOR INTERLOCK  STD GUA - FULLY ENCLOSED SPLASH GUARDING SYSTEM  STD GUA - TELESCOPIC SLIDEWAY COVERS  STD HYD - STANDARD HYDRAULIC UNIT  STD LI - LED WORKING AREA LIGHTING SYSTEM  STD LI - PATROL LIGHT (3 COLOUR)  STD MISC - AIR CONDITIONING IN ELECTRICAL CABINET  STD MISC - BASIC MACHINE INSTALLATION PARTS  STD MISC - CE STANDARDS MACHINE CONFIGURATION  STD MISC - CENTRALIZED AUTOMATIC LUBRICATION SYSTEM  STD MISC - MACHINE MANUALS & OPERATOR HANDBOOKS  STD MISC - STANDARD ACCESSORIES  STD POW - TRANSFORMER (415V, 3PH, 50HZ)  STD SPGB TC - BELT DRIVE SPINDLE - 3,500 RPM - A2-6  STD SPGB TC - SPINDLE MOTOR FANUC 15.0 / 18.5 KW  STD TS - HYDRAULIC TAILSTOCK  STD TUR - 12 STATION SERVO TURRET MACHINE CONSTRUCTION & FEATURES  SOLID CAST IRON 45 DEGREE SLANT BED CONSTRUCTION  HARDENED & GROUND BOX GUIDEWAYS  12 STATION SERVO TURRET  10 INCH STANDARD CHUCK SIZE - 12 INCH & BAR CAPACITY UPGRADE OPTIONS  15.0 / 18.5 KW MAIN SPINDLE  HYDRAULIC TAILSTOCK MACHINE SPECIFICATION CAPACITY Max. Swing Diameter Over Bed Ø 600 MM Max. Swing Diameter Over Saddle Ø 480 MM Max. Turning Diameter Ø 500 MM Gcodpfsxt Nrmsx Ag Dsa Max. Turning Length 570 MM Max. Bar Capacity Ø 74 MM X / Z AXIS TRAVEL X-Axis Travel 280 MM Z-Axis Travel 600 MM X / Z AXIS SERVO MOTOR TORQUE X-Axis Torque 10.5 NM Z-Axis Torque 10.5 NM SPINDLE HEADSTOCK STD Spindle Nose A2-8 Spindle Bore 86 MM Spindle Speeds 30 ~ 3,500RPM Chuck Size Ø 10” - 245 MM Spindle Power 15.0 / 18.5 KW FEEDRATES X-Axis Rapid Traverse Rate 16 M / MIN Z-Axis Rapid Traverse Rate 20 M / MIN Cutting Feed Rate 1 ~ 8,000 MM / MIN TURRET Number of Turret Stations 12 Turret Indexing Time 0.2 SEC / POS Tool Size - Turning 25 x 25 MM Tool Size - Boring Ø 40 MM TAILSTOCK Tailstock Quill Diameter Ø 100 MM Tailstock Quill Travel 100 MM Tailstock Quill Taper MT5 LIVE CENTER ACCURACY Positioning Accuracy (X / Z) 0.010 / 0.010 MM Repeatability (X / Z) 0.005 / 0.007 MM MISCELLANEOUS Power Requirement 35 KVA Power Supply 415V / 3PH / 50HZ Cutting Coolant Volume 240 L Machine Dimensions (L / W / H) 4,290 / 1,880 / 1,750 Machine Gross Weight 4,000 KGS

Condition: used, Year of construction: 2001, Lathe Okuma MA40, year 2001 Spindle hours: 17,112 The machine can be inspected under power. Gcedsxr Ulcspfx Ag Doa

Condition: used, Manufacturer: HYUNDAI Model: KIT 450 Type : CNC Cnc : FANUC 0i- TB Max. Diameter allowed on bed : 530 mm Max. Turning diameter : 170 mm Maximum turning length: 190 mm Bar passage diameter : 45 mm X axis : 450 mm Gjdpfx Ajxr A N Asg Djca Z axis : 300 mm Spindle speed : 60-6000 rpm Table dimensions : 550 x 2200 mm Number of Slots : 3 Slots diameter : 14 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Gedpfx Aoxrnr Nog Djca Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm Gcsdjxrg Dwspfx Ag Dea number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm y-travel -60 / +80 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale reserved!

Condition: excellent (used), Year of construction: 2018, operating hours: 5,137 h, functionality: fully functional, Year of manufacture: 2018 Control system: Fanuc 32i-Model B – Manual Guide i Maximum turning diameter: 530 mm Maximum turning length: 500 mm Travel distances: X-axis: 320 mm Z-axis: 1,200 mm Main spindle: Drive power: 37/30 kW Torque: 3,073/2,490 Nm Maximum speed: 2,000 rpm Max. bar capacity: 117 mm Turret: 12-station tool turret, BMT75P 12 driven stations Drive power: 7.5/5.5 kW Maximum speed: 4,000 rpm Additional equipment: Programmable tailstock MK5 Main spindle with 2-speed gearbox Tooleye (tool measurement) Chip conveyor High-pressure pump, 20 bar 3-jaw chuck Ø 380 mm Tool breakage monitoring Program memory expansion Gcsdjxqn Uhopfx Ag Dsa Hyundai L400MC CNC Lathe – Powerful and Reliable The Hyundai L400MC is a robust and precise CNC lathe, engineered for demanding machining tasks. Ideal for businesses prioritizing stability, durability, and industrial performance. Thanks to its solid construction, the L400MC offers maximum accuracy even with heavy workpieces and long machining cycles. An excellent choice for demanding applications in batch or single-part production.