Maquinaria Control Barcelona Sl
Maquinaria Control Barcelona Sl from Terrassa
This dealer has not yet provided a company description.
Maquinaria Control Barcelona Sl
Aries 57 Nave Q
Pol. Ind. Can Parellada
08228 Terrassa
Spain
Current offers from similar dealers
Success:
Your message has been sent.
Listing
Villingen-Schwenningen
18,699 km
SPINNER TTC 300 52SMMCY CNC lathe
SpinnerTTC 300 52 SMMCY
SpinnerTTC 300 52 SMMCY
Call
Condition: like new (used), Year of construction: 2016, operating hours: 3,200 h, functionality: fully functional, overall weight: 4,600 kg, Equipment: documentation/manual, Like-new SPINNER TTC300-52-SMMCY CNC turning center (year of manufacture 2016) – top-of-the-line equipment including an extensive clamping device and tool package.
!! Spindle hours less than 2,000 hours !!
The machine was initially used in a vocational school and subsequently produced simple parts for approximately the last 14 months.
Dual-spindle turning center SPINNER TTC300-52-SMMCY with Y-axis, counter-spindle, and two 12-position BMT45 turrets.
The machine features an enlarged main spindle with a 65 mm bar capacity, as well as an exceptionally extensive package of clamping devices (SMW, Hainbuch) and BMT45 tool holders.
Highlights & Technical Data:
• Control system: Siemens 840D-SolutionLine (15" color screen, multi-channel technology)
• Main spindle (upgraded): 65 mm bar capacity, up to 4,000 rpm, 24 kW, 228 Nm, C-axis, water-cooled
• Counter-spindle: Traversable, up to 7,000 rpm, 6 kW, 38 Nm, flat flange 100 mm, C-axis, water-cooled, including coolant supply & ejector
• Turret 1 (top): 12-position BMT45 (all stations driven, 6,000 rpm), travel X1 = 180 mm, Z1 = 450 mm, Y-axis (±40 mm)
• Turret 2 (bottom): 12-position BMT45 (all stations driven, 6,000 rpm), travel X2 = 110 mm, Z2 = 450 mm
• Precision & Options: Glass scales in X1 and X2, tool measuring arm, ShopTurn & 3D simulation, FORCE-Control (driving against a fixed stop), contour handwheel, tool breakage/current monitoring
• Cooling & Automation: 15 bar high-pressure pump (switchable), MAHLE double filter, chip conveyor (150-liter tank), parts catcher with conveyor belt (up to Ø 65 mm), bar loader interface
Ibsdpfx Akj Akwqqe Ded
Including extensive accessory package:
• Clamping devices main spindle: SMW 3-jaw chuck KNCS-N225-66-A8, SMW collet chuck KSZ-MB 60-A8 (including 57 collets Ø 4–60 mm), Hainbuch SPANNTOP nova Kombi Axfix 42 (including 39 collets Ø 4–42 mm & quick-change system)
• Clamping devices counter-spindle: SMW 3-jaw chuck KNCS-N140/35-3B
• Tool package (BMT45): Over 55 BMT45 tool holders (long turning tools, boring bars, cutoff tools, short boring chucks) as well as 26 reducing sleeves and clamping plates.
Success:
Your message has been sent.
Listing
Białystok
17,523 km
CNC turning and milling center
DMG MORICLX 450 TC
DMG MORICLX 450 TC
Call
Condition: excellent (used), Year of construction: 2022, operating hours: 99 h, functionality: fully functional, spindle motor power: 17 W, spindle speed (max.): 5,000 rpm, milling spindle length: 1,100 mm, type of input current: three-phase, total height: 2,500 mm, total length: 5,190 mm, total width: 2,110 mm, overall weight: 9,200 kg, spindle diameter: 400 mm, Equipment: documentation/manual, We offer for sale a high-class DMG MORI CLX 450 TC CNC turning and milling center, designed for precise and comprehensive machining of parts.
The machine combines advanced turning and milling capabilities, enabling the production of complex components in a single setup. Thanks to the B-axis, Y-axis, and turning-milling spindle, it provides high technological flexibility and high machining accuracy.
Key advantages of the machine:
Comprehensive turning and milling.
B-axis with a tilting range of ±120°.
Y-axis enabling complex milling operations.
Main spindle with a speed of up to 5000 rpm.
compactMASTER turning-milling spindle with a speed of up to 12,000 rpm.
Ability to machine parts with a diameter of up to 400 mm and a length of up to 1100 mm.
Tool magazine – standard 30 positions
Possibility of comprehensive machining of a part from multiple sides, with the appropriate spindle configuration.
Application:
The machine is ideal for single-piece, small-batch, and large-scale production, especially for manufacturing complex components that require a combination of turning and milling operations.
Ideal for companies in the following industries:
automotive,
aerospace,
machine building,
Ibedpfj Akvq Djx Ak Dod
toolmaking,
hydraulics and pneumatics,
precision industrial components manufacturing.
Information about the machine offered:
Year of manufacture: 2022
Operating hours: 99 hours
Control system: Siemens
Additional equipment: complete set of fixtures, 3D model of the machine
Technical condition: As new
Location: Fasty
The machine offers great technological possibilities, reduces the number of retooling operations, and allows for shorter production times by performing multiple operations in a single setup.
We invite you to contact us for detailed information, technical documentation, and to arrange a machine demonstration. We are sending the complete machine specifications in the attachment.
Success:
Your message has been sent.
Listing
Thiene
18,594 km
CNC turning and milling center
Nakamura-TomeWT-300
Nakamura-TomeWT-300
Call
Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 780 mm, turning diameter: 270 mm, spindle speed (min.): 4,500 rpm, spindle bore: 80 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 780 mm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, total height: 2,266 mm, total length: 4,230 mm, total width: 2,518 mm, overall weight: 14,000 kg, spindle diameter: 210 mm, Equipment: CE marking, bar feeder, documentation/manual, - Maximum turning diameter: 270 mm
Ibodpfxe Akvduj Ak Ded
- Maximum turning length: 780 mm
- Double motorized turret
- C-axis
- Y-axis
- FANUC 0i-TF CNC control
- LNS Sprint – Quick Load Servo III bar feeder
Success:
Your message has been sent.
Listing
Monheim am Rhein
18,573 km
CNC Turning- and Milling Center
OKUMALT 200-MY
OKUMALT 200-MY
Call
Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with C-axis and Y-axis,
2 turrets, and subspindle.
The machine has been partial overhauled in October 2026.
The Z-axis guideways on the lower turret were replaced.
CNC control: Okuma OSP-E 100 L
Maximum turning diameter: 210 mm
Swing over bed: 400 mm
Distance between spindle noses: 960 mm
Main spindle:
Spindle bore: 53 mm
Speed range: 50 to 6000 rpm
Motor power: 11/7.5 kW
Subspindle:
Spindle nose: JIS A2-6
Speed range: 38 to 5000 rpm
Isdpfxo Akuyfj Ak Dobd
Motor power: 11/7.5 kW
Z-axis:
Travel: 700 / 700 mm (ZA + ZB)
Rapid traverse: 40000 mm/min
W-axis:
Travel: 940 mm
Rapid traverse: 40000 mm/min
X-axis:
Travel: 167 / 192 mm (XA + XB)
Rapid traverse: 30000 mm/min
Y-axis:
Travel: 92 mm (+50/-42 mm)
Rapid traverse: 15000 mm/min
C-axis:
Indexing: 360 x 0.001 deg.
Rapid traverse: 400 rpm
Disc turret:
2 x 12 stations
Tool holder mount: VDI 30 mm
Power of driven tools: 4 kW
Total connected load: 35.7 kVA
Machine weight: 7100 kg
Machine dimensions: 2660 x 2000 x 2330 mm*
Plus swarf conveyor and bar loader
Accessories
FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005
Chip conveyor
Coolant system
Collet chuck for main and subspindle
Both turrets equipped with tool holders
Machine documentation.
Success:
Your message has been sent.
Listing
Vreden
18,500 km
CNC turning center with C-axis, 12 driven tools
MonfortsRNC 500 AC
MonfortsRNC 500 AC
Call
Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC turning and milling center Monforts RNC 500 AC, year of manufacture 2003, with GE Fanuc 21i-TB, C-axis and 12-position turret from Sauter (VDI 50, all stations powered). The machine was in production until 2026 and was sold due to a restructuring of the manufacturing process. On November 17, 2026, we saw it running: reference run, spindle and turret operate perfectly.
Equipment:
- GE Fanuc Series 21i-TB control unit with Monforts control panel
- C-axis for drilling and milling operations
- Sauter tool turret, 12 stations, VDI 50, all powered
- Power chuck SMW-Autoblok KNCS-N 315 (Ø 315 mm, 3 jaws)
- Tailstock
- Hydraulic, self-centering steady rest
- Chip conveyor (hinged belt)
Included accessories as shown in the photos:
- Several powered tool holders Coromant Capto (up to 3,000 rpm, 150 Nm)
- Extensive set of VDI-50 tool holders (boring bar, drilling bar and collet chuck holders)
- Documentation including programming instructions, tool list
- Backup of CNC parameters
Condition and maintenance: Hydraulic hoses renewed approximately two years ago, buffer battery renewed, parameter backup available. Electrical connection 400 V / 50 Hz, 63 A, 41 kVA.
Inspection while running is possible by appointment at the Vreden location. If desired, we will take over transport, installation and commissioning.
Kraft Werkzeugmaschinen GmbH, member of the FDM. Call or write to us, and we will gladly send you videos of the test run.
Iedps Akuanjfx Ak Debd
Success:
Your message has been sent.
Clickout
Weilheim an der Teck
18,598 km
CNC high-precision milling machine
EMCOCONCEPTMILL 55
EMCOCONCEPTMILL 55
Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 2,000 mm, total width: 950 mm, overall weight: 200 kg, controller manufacturer: EMCO, controller model: EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840), input voltage: 230 V, table length: 420 mm, table width: 120 mm, number of slots in tool magazine: 7, EMCO CONCEPTMILL 55 CNC High-Precision Milling Machine
Note: A machine of identical design and completely identical specifications will be delivered, and not necessarily the exact machine shown in the photos.
Additional technical data:
- Tool holder: presumably SK 30
- Max. tool clamping length: 35 mm
- Frequency: 50/60 Hz
- Table with 2 slots and a special EMCO vise, jaw width: 60 mm
- Includes a matching mobile workbench with various suitable accessories
Ibjdj Akrvpopfx Ak Dod
- Includes a 7-position tool changer, collets, and various suitable tool holders
FCA D-73235 Weilheim Teck - loaded onto a truck
Success:
Your message has been sent.
Listing
Dietmannsried
18,594 km
CNC turning and milling center
MazakQuickTurn Smart 200M
MazakQuickTurn Smart 200M
Call
Condition: good (used), Year of construction: 2014, SN254618 CNC Mazatrol Smart, worn tools, Kutagawa chuck, bar feeder ILS MUK 7012.
Ijdpe Akpmfefx Ak Dsbd
Success:
Your message has been sent.
Listing
Cascina Faustina
18,791 km
CNC turning and milling center
TakisawaTMM 250M3
TakisawaTMM 250M3
Call
Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 10,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Japanese-made multitasking lathe with FANUC Series 180-is-TB CNC, compliant with CE standards.
Upper turret with B-axis and Y-axis, CAPTO C6 tool holder.
Lower turret with motorized VDI 40 tools, 15 positions.
ASA-8" main spindle + ASA-6" sub-spindle.
Main and sub-spindles with continuous C-axis.
30-position disc-type tool changer.
High-pressure coolant system through the spindle with dedicated filter.
Manual tool pre-setter with dual head.
Chip conveyor.
Refrigerator.
Hydraulic power unit.
Automatic door opening.
Part collection arm with parts discharge belt.
Wide range of tool holders for the lower turret (turning and milling).
Wide range of chucks.
Complete set of manuals.
Capacities:
Workpiece rotation: 780 mm.
Maximum turning diameter: 350 mm (500).
Ibedpfx Ako Akpf He Dod
Maximum turning length: 1300/300 (with flange).
Travels:
X-axis travel (tooling spindle): 560 mm.
Y-axis travel (tooling spindle): 260 mm (+/- 130).
Z-axis travel (tooling spindle): 1300 mm.
B-axis indexing area (tooling spindle): 230° (+/- 115°).
A-axis travel (right-hand head): 1300 mm.
X-axis travel (lower turret): 228 mm.
Z-axis travel (lower turret): 1260 mm.
Success:
Your message has been sent.
Listing
Borgo San Dalmazzo
18,936 km
CNC turning and milling center
MORI SEIKINL 2500 Y / 1250
MORI SEIKINL 2500 Y / 1250
Call
Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 1,298 mm, turning diameter over cross slide: 366 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,345 mm, total height: 2,265 mm, total length: 5,049 mm, total width: 2,200 mm, spindle nose: 8, overall weight: 7,500 kg, CNC MSX 850 III
MACHINING CAPABILITIES
Max. swing over bed: 920 mm
Swing above cross slides: 742 mm
Max. turning diameter: 366 mm
Standard turning diameter: 275 mm
Max. turning length: 1,298 mm
Bar machining capacity: 80 mm Ø
TRAVEL
X-axis: 260 mm
Y-axis: + - 50 mm
Z-axis: 1,345 mm
SPINDLE
Isdpfx Aj Akpcnek Debd
Spindle nose mounting: JIS A2-8
Max. spindle speed: 4,000 rpm
Spindle bore diameter: 91 mm
Spindle bearing inner diameter: 140 mm
Min. spindle indexing increment: 0.001°
TURRET
Number of tool stations: 12
Height of square tool shank: 25 mm
Bore diameter of tool holder shank: 50 mm
Turret indexing time: 0.40 sec.
Max. speed of rotating tool spindle: 6,000 rpm
FEED RATES
Rapid traverse X-axis: 30,000 mm/min
Rapid traverse Y-axis: 10,000 mm/min
Rapid traverse Z-axis: 30,000 mm/min
Tailstock retraction: 20,000 mm/min
Tailstock extension: 7,000 mm/min
TAILSTOCK:
Travel: 1,284 mm
Type: Non-rotating MT5
MOTOR:
Spindle motor: 18.5 kW
X-axis feed motor: 3.0 kW
Y-axis feed motor: 3.0 kW
Z-axis feed motor: 4.5 kW
Electrical power supply: 35.4 kVa
Compressed air supply: 0.5 MPa
Coolant tank capacity: 420 L
Machine dimensions: 5,049 mm x 2,200 mm x 2,265 mm (h)
Weight: 7,540 kg
Machine complete with:
• 250 mm diameter chuck, KITAGAWA
• No. 3 radial motorized modules
• No. 3 axial motorized modules
• Instruction manuals
Success:
Your message has been sent.
Listing
Godega di Sant'Urbano
18,519 km
CNC turning and milling center
DOOSANPuma 5100A
DOOSANPuma 5100A
Call
Condition: excellent (used), Year of construction: 2018, operating hours: 6,147 h, functionality: fully functional, Doosan PUMA 5100A Turning Center
Year of manufacture: 2018
Numerical control: Fanuc i-Series
Spindle bore: 15"
Maximum turning diameter: 650 mm
Maximum turning length: 1,032 mm
Diameter of rotation on the machine bed: 900 mm
Diameter of rotation on the carriage: 690 mm
Recommended turning diameter: 380 mm
Spindle bar passage: 132 mm
Maximum spindle speed: 2,000 rpm
Spindle power: 37 / 30 kW
Maximum spindle torque: 3,280 Nm
Number of turret positions: 10
External tool size: 32 x 32 mm
Maximum boring bar diameter: 80 mm
X-axis travel: 362 mm
Z-axis travel: 1,105 mm
Rapid traverse rate (X-axis): 16 m/min
Rapid traverse rate (Z-axis): 20 m/min
Tailstock travel: 1,000 mm
Tailstock sleeve diameter: 120 mm
Sleeve travel: 120 mm
Iedpfx As Akk Tujk Djbd
Nominal electrical power: 52.55 kVA
Machine dimensions: 4,759 x 2,056 x 2,194 mm
Machine weight: 10,100 kg
- Automatic operator door
- Standard 400 mm chuck and standard toolholder set included
- Automatic tool presetting
Success:
Your message has been sent.
Listing
Hårlev
17,986 km
CNC turning and milling center
GildemeisterCTX 310 V3
GildemeisterCTX 310 V3
Call
Condition: ready for operation (used), functionality: fully functional, In very good condition.
Gildemeister CTX 310, serial number 8042942078C.
Year 2004, operating hours 24358/8001.
Ibedpfe Aki Ncjx Ak Dsd
V3 C-axis and 12 rotating tools, VDI30.
Success:
Your message has been sent.
Listing
Contamine-sur-Arve
18,946 km
Turn-mill center
DMG MORINTX2000/1500S
DMG MORINTX2000/1500S
Call
Condition: used, TECHNICAL DETAILS
- Number of axes : 7
- Number of spindles : 2
MAIN SPINDLE
- Spindle nose : A2-6
- Spindle power : 22 [kW]
Ibjdpfx Akj Akfpre Dsd
- Spindle speeds : 5000 [rpm]
- Max. bar diameter : 65 [mm]
- Max. turning diameter : 610 [mm]
- Max. diameter on bench : 660 [mm]
- C axis indexing precision : 0.0001 [°]
COUNTER-SPINDLE
- Spindle nose : A2-6
- Spindle power : 22 [kW]
- Spindle speeds : 5000 [rpm]
- C axis indexing precision : 0.0001 [°]
- Travel : 1500 [mm]
- Spindle / counter-spindle distance : 1600 [mm]
TURNING-MILLING SPINDLE
- X/Z stroke : 495/1560 [mm]
- Y stroke : +/- 125 [mm]
- B Axis stroke : +/-120 [°]
- B axis indexing precision : 0.0001 [°]
- Tool type : CAPTO C6
- Spindle speeds : 12000 [rpm]
- Spindle power : 18.5 [kW]
TOOL CHANGER
- Auto. Tool Changer type : Bras chargeur
- Tool magazine capacity : 38
POWER SUPPLY
- Supply voltage : 400 [V]
- Total installed power : 80 [kW]
WEIGHT & DIMENSIONS
- Machine floor space : 4080 X 2980 [mm]
- Machine weight : 14750 [kg]
EQUIPMENT
- CNC : Fanuc 31i-B5
- Interactive programming : MAPPS IV
- Coolant tank
* with high-pressure pump
* Coolant through spindle
- Chips conveyor
- Tool probe
- Parts catcher
- Parts conveying strip
- Bar loader : LNS QUICK LOAD SERVO III
- Electric transformer
- Chuck 3 jaws : 2
Success:
Your message has been sent.
Listing
Wechingen
18,516 km
CNC turning and milling center
Gildemeister NEF 720
Gildemeister NEF 720
Call
Condition: excellent (used), Gildemeister NEF 720
Iodpfs Akfguex Ak Debd
Year of manufacture: 2001
Control system:
- Heidenhain Manual Plus 4110
Working area:
- Swing diameter over bed: 710 mm
- Swing diameter over cross slide: 415 mm
- Distance between centers: 1995 mm
Spindle:
- Spindle bore diameter: 92 mm
- Speed range: 10 to 1800 rpm
- Number of gear stages: 2
- Stepless
Tool holder:
- Multifix, size C (D1)
Tailstock:
- Quill diameter: 110 mm
- Quill stroke: 210 mm
- Quill arbor: MK 6
Accessories:
- Lynette
- Various Multifix steel holders
Availability:
- Immediately available
Success:
Your message has been sent.
Listing
Dresden
18,200 km
CNC turning and milling center
OkumaLB400 1200
OkumaLB400 1200
Call
Condition: good (used), Year of construction: 2003, We are offering a good Okuma LB400 1200 CNC turning and milling center, manufactured in 2003.
Iodo Akdd Nopfx Ak Dobd
Manufacturer: Okuma
Model: LB400 1200
Year of manufacture: 2003
Condition: Good
Machine type: CNC turning and milling center
If you have any questions or require further information, please feel free to send us a message or call us.
Success:
Your message has been sent.
Listing
Monheim am Rhein
18,573 km
CNC Turning- and Milling Center
MORI-SEIKINT 4300DCG/1500SZ
MORI-SEIKINT 4300DCG/1500SZ
Call
Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details
turning diameter 660/275 mm
turning length 1498 mm
control Fanuc/Mori Seiki MSX 701
total power requirement 90 kVA
weight of the machine ca. 26,6 t
dimensions of the machine ca. 5301 x 2997 x 2788 mm
Additional information
9-axis CNC turning and milling centre
* Fanuc MSX-701 CNC control
* Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg.
* 40-position tool magazine
* 10-position turret at bottom, all positions driven
* 2 x 3-jaw quick-change chuck KNCS-N 315/91
* KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system
* Chip conveyor
* Drain system for main spindle chuck (controlled via M function)
* Drain system for tool cutting edge (controlled via M function)
* Coolant gun incl. accessories
* Oil mist extraction
* Direct measuring system X1, X2, Y-axis
* Bar loader interface
* Double foot switch for both spindles
* Islands and pocket programming for MAPPS
* High-speed fixed cycle for MAPPS
* Programm memory extension to 8 MB
* Programm restart
* 3-stage signal lamp
* 512 MB memory card (CF card)
Swing diameter over cross slide (tool spindle 1): 750 mm
Swing diameter over cross slide (turret 2): 400 mm
Max. turning diameter (tool spindle 1): 660 mm
Max. turning diameter (turret 2): 275 mm
Max. machined workpiece length: 1498 mm
Max. bar material: 90 mm
Travels:
Ibodo Akc T Uepfx Ak Djd
X1 axis (tool spindle): 750 mm
Y axis (tool spindle): 420 (+/- 210) mm
Z1 axis (tool spindle): 1635 + 100 mm for tool change
B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked
X2 axis (turret): 195 mm
Z2 axis (turret): 1525 mm
SZ axis (subspindle): 1610 mm
Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min.
Main and subspindle:
Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm.
C axis (spindle 1 + 2): 0.001 deg.
Main spindle motor: 22/18.5 kW
Subspindle motor: 22/18.5 kW
Torque (spindle 1 + 2): 1000 Nm
Disc turret:
Number of tool positions: 10
Speed of driven tools: 6000 rpm.
Drive power: 5.5/3.7 kW
Milling spindle head:
Tool holder: HSK A63
Max. speed: 12,000 rpm
Drive power: 18.5/11 kW
Torque: 120/44 Nm
Tool changer: 40-stations
Tool diameter 70/140 mm
Tool length 400 mm
Tool weight 8/10 kg
Total power requirement 90 kVA
Main dimensions Length x width x height 5301 x 2997 x 2788 mm
Machine weight 26.6 t
Accessories:
Measuring arm (picture) tool measurement in machine
Tool holder + box, reduction sleeves, driven tools
Clamping jaws package
Collets package
Success:
Your message has been sent.
Listing
Monheim am Rhein
18,573 km
CNC Turning- and Milling Center
OKUMALB400-M
OKUMALB400-M
Call
Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details
turning diameter 420 mm
turning length 650 mm
control Okuma OSP-U100L
spindle bore 95 mm
spindle turning speed range 2800 U/min
travel -x axis 300 mm
travel -z axis 675 mm
main drive motor 22/30 kW
weight of the machine ca. 5,5 t
dimensions of the machine ca. 2700 x 1900 x 1885 mm
Isdpfx Ae Akc I Nsk Dobd
Additional information
First put into operation 2001.
- 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW
- Internal extraction system by Hengst Filtration (year of manufacture 2023)
- Touchsetter, tool measurement
- C-axis (main spindle)
- Tool breakage and wear monitoring
- 3-jaw power chuck, Kitagawa B210, Ø250
- Tailstock
- Coolant supply, also through the tool
- IGF dialog programming
- Chip conveyor
Success:
Your message has been sent.
Listing
Borgo San Dalmazzo
18,936 km
Cnc turning and milling center
OKUMAMULTUS U3000 1SW
OKUMAMULTUS U3000 1SW
Call
Condition: like new (used), Year of construction: 2022, operating hours: 2,200 h, functionality: fully functional, turning length: 1,500 mm, turning diameter over cross slide: 650 mm, turning diameter: 650 mm, spindle speed (max.): 4,200 rpm, spindle bore: 91 mm, travel distance X-axis: 645 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,600 mm, bar passage: 91 mm, total height: 2,955 mm, total length: 5,425 mm, total width: 2,995 mm, spindle nose: 8, overall weight: 16,500 kg, spindle diameter: 275 mm, Equipment: documentation/manual, CNC OSP – P300 SA 19’’ OPS-SUITE
CAPABILITIES
Rotary diameter above the table: 650 mm
Distance between centers: 1,500 mm
Maximum machining diameter: 650 mm
Maximum machining length: 1,500 mm
TRAVELS
X-axis: 645 mm
Z-axis: 1,600 mm
Y-axis: 250 mm
W-axis: 1,594 mm
B-axis positioning angle: -30° to +210°
C-axis positioning resolution: 0.0001°
MAIN SPINDLE
Speed: 4,200 min⁻¹
Spindle nose shape: ASA 8
Taper bore diameter: 91 mm
TAILSTOCK
Speed: 5,000 min⁻¹
Spindle nose shape: ASA 6
Taper bore diameter: 80 mm
TOOL HOLDER SPINDLE
Type: H1
Tool holder: HSK-A63
Speed: 12,000 min⁻¹
FEED RATES
X, Z, Y axes: 50, 50, 40 m/min
W-axis (tailstock): 30 m/min
C, B axes: 200, 30 min⁻¹
TOOL MAGAZINE (ATC)
Tool holder: HSK-A63
Number of tools: 80
Maximum tool diameter: 90 / 130 mm
Maximum tool length: 400 mm
Maximum tool weight: 10 kg
MACHINE DIMENSIONS AND WEIGHT
Height: 2,955 mm
Footprint: 5,425 × 2,995 mm
Weight: 16,500 kg
Machine complete with:
• Double self-centering clamping pressure:
o Double clamping pressure on the main spindle via M-codes.
• AUTOBLOK KNCS-N 275/86 A8’’ 3-jaw self-centering chuck for the main spindle
• AUTOBLOK KNCS-NB 225/66 A6’’ 3-jaw self-centering chuck for the tailstock
• Main spindle with large bore
• Tool pre-setting
• 80-position tool magazine
• No. 20 tool holders and turning tools
C-axis synchronization
• Continuous B-axis
• High-precision C-axis for main and tailstock spindles
• 5-axis machining kit
Ibsdpfxj Akcigs Ak Ded
5-axis continuous software kit (X-Y-Z-B-C) for use with a continuous B-axis.
o Includes Super Nurbs high-speed machining software
o Vector control RTCP including automatic tool center point control
o 3D coordinate transformation
o DNC-DT data transmission software
o Helical interpolation with B-axis
• Air blow on milling head
Air blow option through the milling head (B-axis) for turning/milling operations, switchable air/water type
• Y-axis machining kit
Consisting of:
o Helical interpolation with X, Y, Z axes
o Turning function that allows turning with tools offset in the Y-axis relative to the turning axis in X
• API library 2 (on status)
• IGF conversational programming
Advanced IGF programming software M-E kit
o Interactive cycles
o Real 3D simulation
o Tool holder database
o OneTouch for automatic programming
o CAD mathematical import
• 3D mathematical model
• Renishaw TRS2 tool breakage laser probe
• Basic 5-axis automatic geometry recalibration kit
• Software for resolution down to 0.1 microns
• Z-axis origin shift after probing on the tailstock
• C-axis origin shift after probing on the main spindle
• High-pressure system 70 bar
• MT10 side chip conveyor Multus
• Instruction manuals and CE declaration
Success:
Your message has been sent.
Listing
Halberstadt
18,302 km
CNC Turn-Mill Machine
DMG GILDEMEISTERGMX 300 linear
DMG GILDEMEISTERGMX 300 linear
Call
Condition: good (used), Year of construction: 2007, Ref. -No.: 10726
Manufacturer: DMG GILDEMEISTER
Type: GMX 300 linear
Year of construction: 2007
Type of control: CNC
Control: Siemens 840D powerline
Storage location: Halberstadt
Country of origin: Germany
C-axis speed: 5000 RPM
Travel quill: 1500 mm
Turning Diameter: 640 mm
Swing Diameter: 640 mm
Tool Taper: HSK63-A
Spindle Speed Min.: 12.000 RPM
Rapid Travel Speed X-Axis: 16 m / min
Rapid Travel Speed Z-Axis: 40 m / min
Travel -X Axis: 1500 mm
Main Drive: 25/35 kW
C-Axis For Work Spindle: Torque: 390 Nm
Spindle distance: 1930 mm
Spindle 1 chuck diameter: 200-315 mm
Spindle 2 chuck diameter: 315 mm
hydraulic tank: 30 L.
coolant reservoir: 1000 L.
Coolant tank at chip conveyor: 370 L.
Spindle motor drive: 13,2/22 kW
Bearing diameter: 80/55 mm
Quill holder: 5 MK
Flow rate: 20 l/min
Further information:
The machine is offered including all available accessories and technical documentation.
Iedpfj Aka Hqox Ak Djbd
The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.
Success:
Your message has been sent.
Listing
Rottweil
18,683 km
CNC turning and milling center
GildemeisterCTX 410 V3
GildemeisterCTX 410 V3
Call
Condition: good (used), Year of construction: 2007, Control system: Siemens 840D Powerline with ShopTurn 3D simulation and SlimLine panel
X-axis: 250 mm
Z-axis: 635 mm
C-axis with tool drive
Chuck diameter: 250 mm
Turning diameter: 320 mm
Turning length: 600 mm
Swinging diameter: max. 505 mm
Spindle speed range – main spindle: max. 5,000 rpm
Drive power – main spindle: 21 kW, 240 Nm
Spindle bore: 87 mm
Chuck diameter: 250 mm
Sauter disc turret: 10 positions
Tool holder: VDI 30
Machine weight: approx. 6.0 t
Space requirement: approx. 8.1 x 2.4 x 1.80 m
Accessories:
- 1x collet chuck
- 1x jaw chuck
- 2x fixed tool holders
- 1x driven tools
- Chip conveyor
Iedpfxs Ai Uiyo Ak Dsbd
- Documentation
Operating hours: approx. 47,500 h (reading on 08/04/2026)
Runtime: approx. 19,500 h (reading on 08/04/2026)
Machine condition: Unchecked – last used in production
The accessories shown in the picture may not be included in the scope of delivery.
Only accessories confirmed in writing by us will be included.
Success:
Your message has been sent.
Listing
Iszkaszentgyörgy
18,046 km
Cnc lathe with C axis
DOOSANPUMA2100LB
DOOSANPUMA2100LB
Call
Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, Controller: Doosan-Fanuc i Plus
Swing over bed: 600 mm
Max. turning diameter: 406 mm
Max. turning length: 760 mm
Chuck size: 254 mm
Bar capacity: Ø 76 mm
Ibsdpfs Ai T Rdsx Ak Djd
X-axis travel: 260 mm
Z-axis travel: 830 mm
Rapid traverse (X / Z): 30 / 30 m/min
Max. spindle speed: 3,500 rpm
Main spindle motor (power): 22 / 18.5 / 15 kW
Max. spindle torque: 403 Nm
Spindle nose: ASA A2-8
Number of tool stations: 12 stations
Machine weight: approx. 5,500 kg
Features, accessories:
- Tailstock
- Tool turret with driven tool stations (live tooling)
- Chip conveyor
- Coolant system
- Tool setter (tool measurement)
- Parts catcher
The machine has barely been used and is in very good condition. Under power in Hungary. It was purchased as a new machine.
Success:
Your message has been sent.
Listing
Germany
18,608 km
CNC turning and milling center
IndexG200
IndexG200
Call
Condition: good (used), Year of construction: 2003, functionality: fully functional, Feature | Specification
Manufacturer | INDEX
Model | G200
Year of manufacture | 2003
Control system | Siemens SINUMERIK 840C / INDEX C 200-4
Condition | Used, good condition according to supplier
Availability | Immediately available
1 Machine description
The INDEX G200 is a CNC turning machine with a main and counter spindle, two tool turrets, and driven tool stations. The machine offered is equipped with a Siemens SINUMERIK 840C control system, an FMB bar feeder, an 80-bar high-pressure pump, and a hinged belt chip conveyor. The scope of delivery includes a comprehensive package of tool holders, clamping devices, and accessories.
2 Technical data
Feature | Specification
Machine type | CNC turning machine / turning-milling center
Design | Main and counter spindle
Isdpfxs Ai T Ifj Ak Dobd
Spindle diameter | D = 60 mm according to supplier
Control system | Siemens SINUMERIK 840C
Control panel | INDEX C 200-4
Turret 1 | Axes X / Z / YB
Turret 2 | Axes X / Z
Tool holder | VDI 25
Tool stations | All stations driven
Bar feeder | FMB
High-pressure pump | 80 bar
Chip conveyor | Hinged belt chip conveyor, renewed
Year of manufacture | 2003
Success:
Your message has been sent.
Listing
Germany
18,581 km
CNC turning and milling center
MazakIntegrex 300 - III
MazakIntegrex 300 - III
Call
Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Mazak Integrex 300 - III turning/milling center,
year of manufacture 2005,
CNC control 640 MT,
travel X/Y/Z 630/230/1,585 mm,
B axis NC swiveling head -30°/+195°,
tool magazine with 80 positions Capto,
main spindle 26 kW,
C axis 0.001°,
Ibode Ai Rbgepfx Ak Dsd
tailstock MK 5,
high-pressure coolant system 70 bar with filtration unit,
Tooleye,
5-axis simultaneous machining package,
Mazak Monitoring System,
chip conveyor,
Success:
Your message has been sent.
Listing
Pratteln
18,780 km
CNC turning and milling center
MORI-SEIKIMT-3000/1500
MORI-SEIKIMT-3000/1500
Call
Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,755 h, functionality: fully functional, machine/vehicle number: MT-3000/1500: MT301EB0051, turning length: 1,540 mm, turning diameter: 560 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 90 mm, travel distance X-axis: 635 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,595 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, feed rate X-axis: 30 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, total height: 3,295 mm, total length: 6,404 mm, chuck outer diameter: 400 mm, total width: 3,070 mm, quill travel distance: 150 mm, spindle nose: JIS A2-8, overall weight: 18,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, Machine type: Turning and milling center
Manufacturer: MORI-SEIKI MT-3000/1500
Condition: good, can be inspected while powered on
Operating hours: 15755h
Ibjde Ai N D Aepfx Ak Ded
Control system: CNC Mori-Seiki MSX-501 (MAPS2)
Max. turning diameter: 560mm
Turning length: 1540mm
Swivel diameter: Max. 815mm
Spindle-tailstock distance: 1725mm
Axis travels: X-axis: 635mm / Y-axis: ±110mm (220mm) / Z-axis: 1595mm /
Rapid traverse: (X/Y/Z) 24/24/30m/min
Feed rate: Max. 30000mm/min
Total power: 70kW
Weight: 18200kg
Dimensions (LWH): 6404x3070x3295mm
Main spindle:
Chuck: Forkardt power chuck FNC-400/3
Speed range: 30-3000/min
Main spindle power: 30kW / 25kW
Spindle nose: JIS A2-8
Spindle bore: 90 mm
Spindle bearing diameter: 160mm
C-axis division: 0.001°
Milling spindle:
Spindle speed: 8000/min
Power: 7.5kW / 5.5kW
Tool taper: Capto6 (C6)
Spindle bearing diameter: 80mm
B-axis: -120° to +105°
B-axis resolution: 0.001°
Number of tools: 120
Max. tool diameter: 90/125mm
Max. tool length: 400mm
Max. tool weight: 8kg
Tool change time: 1.6 sec.
Tailstock:
Morse taper: MK5
Quill stroke: 150mm
Additional information:
Chip conveyor: Tsubakimoto, hinged belt
Cooling system: Standard (635W /1040W)
Coolant supply: External and through the tool spindle
Tool presetter: Integrated in the machine
Bar loader: Interface only
Foot switch for chuck: Double foot switch
Automatic shutdown: Available
NC screen language: German
PC screen language: German
Warning screen language: German
Optional sentence masking: Softkey version
Programmable data input: Available
Number of shared variables for user macros: 600
Load monitoring: Available
Included with the machine:
Various chuck jaws
Approx. 30 cutting tools Capto6
Live centers MK5
Manuals and documents
Various spare parts
Success:
Your message has been sent.
Listing
Rotterdam
18,611 km
CNC turning and milling center
MazakINTEGREX 200Y
MazakINTEGREX 200Y
Call
Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 140383, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 5,000 rpm, type of input current: three-phase, total height: 2,200 mm, total length: 4,500 mm, total width: 1,900 mm, overall weight: 6,000 kg, spindle diameter: 51 mm, Equipment: chip conveyor, documentation/manual, Mazak Integrex 200Y – CNC turning/milling center, built in 1999
For sale: Yamazaki Mazak Integrex 200Y turn-mill center, fully functional and from ongoing production. This 5-axis machine combines turning and milling in a single setup, ideal for complete machining of complex workpieces. We are the second owner and have been using the machine daily in one shift since approximately 2002 in our production.
Technical specifications
Year of construction: 1999 | Serial number: 140383 | Operating hours: unknown – the hour meter has turned over multiple times.
Control: Mazatrol Fusion 640 MT
Max. turning diameter: approx. 580 mm
Max. turning length: approx. 1,000 mm
Main spindle: up to 5,000 rpm
Milling spindle: up to 6,000 rpm
Axes: X, Y, Z, C-axis, B-axis (swiveling head)
Machine weight: approx. 6,000 kg | Connection power: 44.2 kVA
Scope of delivery:
Mounted chuck, including 1 set of hard jaws
Factory-supplied accessories that are still available to us will be included
Tooling: max. 1 basic internal turning holder, 1 basic external turning holder, 1 boring holder, and 1 collet holder.
Approximately 40 additional holders are available and can be purchased as an extra – estimated price approx. €150 each, depending on the type
Mixture of Dutch and English manuals available
Tailstock available – the machine will be delivered without a center
Mayfran chip conveyor
ToolEye for automatic tool length measurement.
Condition:
Iedpfxe Ai Nb Eo Ak Djbd
The machine is used and approximately 27 years old. Expect signs of use and normal wear and tear consistent with its age; the machine was in use until the time of sale and has always received periodic preventive and corrective maintenance. Inspection and test runs are possible by appointment – please come and see it before you bid.
Price and conditions:
Price: €19,500
The buyer's name will be passed on to Yamazaki Europe N.V. (Belgium) after purchase.
Transport and relocation will be arranged by the buyer and must be carried out by a qualified company with experience in relocating heavy industrial CNC machines. We will disconnect the machine from the electrical and compressed air supply ourselves. The floor in the factory is level; there is a height difference of a few centimeters at the overhead door to the street.
The photos were taken during a regular production day. As can be assumed, the other tools and accessories that you can see in the photos are not included in the scope of delivery. However, we can provide them.
Access to maintenance reports is possible during inspection.
Errors, misprints, and typographical errors in the text and the information provided are expressly reserved. No rights can be derived from the advertisement; the buyer is requested to inspect and test the machine themselves before purchase.
Success:
Your message has been sent.
Listing
Hattingen
18,536 km
CNC Turning- and Milling Center
DMG MORIecoTurn 510
DMG MORIecoTurn 510
Call
Condition: used, Year of construction: 2016, max. swing diameter 680 mm
max. turning diameter 465 mm
control SIEMENS - 840 D
travel -x axis 265 mm
travel -y axis 120 mm
travel -z axis 1.050 mm
number of spindle speeds ^3.250 U/min
Ijdpfx Akj Ai Htqj Dobd
spindle bore diameter 103 mm
forward bearing diameter 140 mm
numbers of positions in the tool changer 12
rapid travel x/y/z 30 / 10 / 30 m/min
rapid traverse C-axis 100 U/min
CNC Turning- and Milling Center | DMG MORI - ecoTurn 510 equipped with 12-way tool changer, turrets for driven tools, Y-axis and chip conveyor.
The machine has only approx. 4.600 H spindle hours.
The machine is in a well-maintained condition and can be inspected at any time under power.
Please refer to further technical details in the attachement of the offer.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: DMG ecoTurn 510 | eco Turn 510 | ecoTurn510

























































































































































































































































