Atlantibalada,Lda.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 11,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1D/25, year 2005, working direction left/right, consisting of following: - APKV-4/25, combination of inlet conveyor of sealing robot, with glass and frame measuring device and automatic 4-lane kork application machine, year 2005 - VFL-1D/25, sealing robot, including options for triple units (2 sealing cycles), , with Beckhoff PC and Lenze servo drives - DOS-1PUD + SID, material dosing for Polysulfide (base 200 litre, catalyst 20 litre) and Silicone (base 200 litre, catalyst 20 litre), year 2005 Iodey Sxk Sepfx Ag Isat The machine will be sold as described above, EXW our warehouse in Austria. No further guarantee or warranty given. Available end of May 2026

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2001, consisting of: - RTVN-15/25ST, extension conveyor for measuring section, belt type, year 2001 - RTVN-15/25MZ, measuring section for gas filling press, belt type, with height and length measuring as well as measuring of glass and spacer width, year 2001 - FPS-36/25U2T, gas filling press for Argon, spindle type, with shape filling option, the machine is already equipped with Sigmatek DIAS control system and LENZE servo motors and controllers, the machine also can do 4-sided step units (bottom 50 mm, front, top and rear 130 mm) year 2001 - RTVB-15/25ST, press outlet conveyor, roller type, year 2001 Isdpey Swfzefx Ag Ijat The machine can be seen at our warehouse in Hofkirchen/Austria on appointment.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, total length: 8,500 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec Sealing robot VFL-1/25, year 1996, for maximal unit sizes of 3500 x 2500 mm, partly refurbished in 2025, consisting of following components: - RTVN-11/25VFE, inlet conveyor sealing robot - VFL-1/25, sealing robot including options for shape sealing according to Lisec shape catalogue and sealing of triple units in two cycles, new transport chains on inlet, outlet and take-off section - DOS-1PSD, mixing and metering station for Polysulfide, completely overhauled Iasdpfx Aey Sv Uzog Ijt The machine is in very good working order. All material and hydraulic hoses as well as check valves have been replaced, pumps and metering device fully refurbished The machine can be seen in our warehouse in Hofkirchen/Austria on appointment and is available from our stock.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1DS/25, year 2001, working direction left/right, consisting of following: Iajdpfoy Sv Unsx Ag Ist - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001, completely overhaule prior delivery Will be sold as described above, EXW our warehouse in Hofkirchen/Austria. No further guarantee or warranty given. Available from stock

Condition: good (used), Year of construction: 1990, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Lisec glass washing machine VHW-25V8, year 1990, working direction left to right, consisting of following: - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 Iaodpoy Sv Ubjfx Ag Iet All machines are in good working order and can be seen in our warehouse in Hofkirchen/ Austria on appointment.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 Isdpfxoy Sv Two Ag Ieat - RSVN-38/25A, frame set section, year 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year 2001 - RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 - FPS-36/25U2T, gas filling press for argon, year 2001 - RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 - RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 - APKV-25/2, 2-track cork applicator, year 2001 - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalogue, Beckhoff PC, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year 2001 Availability now from our stock in Hofkirchen/Austria

Condition: good (used), Year of construction: 2007, functionality: fully functional, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec glass washing machine RTL-25VN, year 2007, working direction left/right, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower. The machine comes with an inlet conveyor RTVN-32/25WE (3,2 m length) and an outlet conveyor RTVN-16/25ST (1,6 m length). Iodoy Sv Tkepfx Ag Isat The brushes are still good for at least 1-2 years depending on production. The machine was used in small production only. Since it has some rusty spots we can offer it for a reasonable price. The machine is in working order and will be available from our stock in Oroshaza/ Hungary.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 12,100 mm, total width: 2,300 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec gas filling press FPS-36/25US, year 2005, consisting of following components: RTVN-27/25MZ, measuring section for gas filling press Iodpfsy Sv Smex Ag Isat FPS-36/25US, gas filling press for Argon RTVN-32/25ST, outlet conveyor 1 of gas filling press RTVN-22/25ST, outlet conveyor 2 of gas filling press RTVN-16/25ST, outlet conveyor 3 of gas filling press The line machine was working until dismantling date and will be available from current location end of May 2026.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: Iajdpfx Agjy Sv Sge Iot - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) – RSVN-38/25A, frame set section, year 2001 – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary

Condition: like new (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, overall weight: 750 kg, type of input current: three-phase, Manual Lisec 2-k sealing machine TAL-50PS/B for Polysulfide. The machine is completely overhauled and therefore in excellent condition. As new. power: 3N/PE 400V 50Hz Load: 5,4kW The machine can be seen in our overhaul warehouse in Oroshaza/Hungary on appointment. Iajdpfoy Sv R Nox Ag Ist

Condition: used, Year of construction: 2002, functionality: fully functional, MARVAL A25T6 DX - Year 2002 Iedpsy Sf Ansfx Ag Ieat Insulating Glass Line - Washing Machine - Roll Press - Tilting Table Max. height: 2500 mm 4 brushes Working direction: right to left Overall dimensions: 15 m + 4 m (tilting table)

Condition: good (used), Year of construction: 2007, functionality: fully functional, total length: 33,300 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Insulation glass production line for Low-E glass LiSEC – Austria, h=2.00 m with Gas Press, Sealing Robot, … Glass dimensions: max. 3500 (4500) x 2000 mm Year: 2007. In good condition. Inspection during production is possible by appointment. 1. AKL, vertical edge deletion system for coated glass sheets, 2. RTL-20B (2003), washing and drying machine, 6 brushes, 3. PSL-35/20V (1989), automatic assembly station for insulating glass, 4. FPS-35/20U2B, gas filling press, Iaedpfx Aey R Tc Heg Iot 5. UKL-35/23VA, tilting table 6. KFL-35/22, horizontal roller conveyor 7. VFL-1D/16 + DOS (PS), automatic sealing system / robot with dosing unit, 8. A complete set of appropriate transport stations (inlet and outlet).

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 121.29.90.28 0595, total length: 1,100 mm, total width: 850 mm, total height: 2,600 mm, working height: 850 mm, input voltage: 380 V, overall weight: 520 kg, load capacity: 150 kg, type of input current: three-phase, space requirement width: 1,200 mm, space requirement length: 1,500 mm, space requirement height: 2,800 mm, power: 1.1 kW (1.50 HP), Equipment: documentation/manual, A professional and reliable solution for filling spacer bars (aluminum and Thermix) with desiccant, designed for insulating glass (IGU) production facilities. Superior Precision: An automated drilling and filling system ensures the optimal amount of desiccant within the frame. Iasdpfsy Rzkxex Ag Ijt Integrated Sealing: The machine automatically seals the openings with butyl after filling, ensuring a hermetic seal. Austrian Quality: A product from the world-renowned leader LiSEC, known for longevity and robust construction capable of continuous industrial operation. General Data: Manufacturer: Peter LiSEC Ges.m.b.H. (Austria) Model/Type: A1RL Serial Number: 121.29.90.28 0595 Year of Manufacture: 1995 Machine Weight: 520 kg Voltage: 380V - 3/N~ 50Hz (three-phase system) Connected Load: 1.1 kW Operating Pressure: 6 bar (pneumatic system) Maximum Load: 150 kg/m Performance and System: Function: Automatic drilling of the back of the spacer, granulate filling, and butyl sealing. Compatibility: Suitable for all standard aluminum and stainless steel (inox) spacer bars. Operating System: Pneumatic-electric drive with an automatic filling cycle. Stability: Massive construction with a transport system that enables processing of large frame formats. Condition: The machine is visually in very good condition and has been maintained according to professional standards. Due to its robust construction, the A1RL model is considered one of the most reliable in the glass processing industry. The machine is sold with all relevant documentation and a set of spare parts. Note: The machine will be available starting from August 2026. For more information, please call: +387 63 335 445

Condition: excellent (used), Year of construction: 2011, Acceptable cable spacer profiles from 6 to 32 mm (0.23″ to 1.26″) (optional, various sizes). H=6.5 mm (H=0.25″). Minimum frame dimensions for spacer (rectangular reference): 100 mm x 150 mm (3.93″ x 5.9″). Maximum frame dimensions for spacer (rectangular reference): 1600 mm x 2000 mm (63″ x 78.7″) per piece (no limit with multiple pieces). Ijdpfx Agsy N Stno Ioat Unlimited possible shapes. Edge bending from 0° to 155°. Permitted bending radius with optional “curved shapes”: from 100 to 4000 mm (3.93″ to 157.5″) (profile thickness from 6 to 18 mm) (0.23″ to 0.7″) and from 200 to 4000 mm (7.87″ to 157.5″) (profile thickness from 20 to 32 mm) (0.78″ to 1.26″).

Condition: excellent (used), Year of construction: 2006, Automatic sealing machine for glass, triple glazing, and shaped glass panes. Size 2500x4000 mm. Working direction: left to right. Iodpfsy I S Ebjx Ag Ioat

Condition: used, functionality: fully functional, LISEC PVB Lamination Line Composed of: TERRUZZI Autoclave – Year 2007 Washing Machine LISEC HVM26B6 – Year 2015 White Room Mangle Dimensions 5500x2800 mm Iasdpfx Agoy I Sd Rj Ijt

Condition: used, functionality: fully functional, FOREL Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Iajdpfxsy If Ayo Ag Iot Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left

Condition: like new (used), Year of construction: 2024, functionality: fully functional, The machine is being sold because the business division is closing down. Iaodpfx Agoy Ez H As Ijt

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: ESL-60/30RS, total length: 20,295 mm, total width: 5,573 mm, Equipment: documentation/manual, For sale: A high-performance industrial line for float glass cutting from the industry-leading manufacturer, LISEC. The line is in excellent working condition, offering high precision, full automation, and heavy-duty reliability. Key Configuration Components: LISEC ESL 6030TS: High-performance automatic glass cutting table (CNC). LISEC ARS-33: Automatic loading and transfer system. LISEC BTA 50/33 & BTA 20/33: Transport and tilting tables for optimized material flow. Iajdjy A Iaqjpfx Ag Iot LISEC TBX 33/12: Breaking/sorting and transport station. LISEC BTH 37-33: Auxiliary processing and logistics section within the line. Key Advantages: Full Synchronization: All components are engineered to operate in a seamless, automated cycle. Precision: High-tech control systems, synonymous with Lisec’s industry standards. Efficiency: Minimal material waste and high-speed operation for maximum throughput. Technical Status: Used, strictly maintained according to technical specifications and manufacturer requirements.

Condition: good (used), Year of construction: 2007, Horizontal conveyor Motorized With castor rollers Conveyor dimensions: 3500 x 2200 x H 900 mm Iasdoy A Ewajpfx Ag Iet In very good and clean condition As is Available immediately

Condition: used, Year of construction: 2017, machine/vehicle number: .038DR17, with control unit, vacuum pump, manufacturer BECKER, and drilling unit Iasdpfjy Aqa Tox Ag Iot

Condition: used, comprising: automatic glass loader, manufacturer HEGLA, type: ISO, serial no. 2033401055; glass washing and drying station, manufacturer LISEC, type: VHW-F29/V8, year 2022, serial no. 315117/944; glass transport station, manufacturer LISEC, type: RTVB1527MZU2, year 2019, serial no. 383109341; inspection station, manufacturer LISEC, type: RSV-38/27B, year 2019, serial no. 320-109338; pressing unit, manufacturer LISEC, type: FPS-35/27U2, year 2019, serial no. 343-109342; frame conveyor, manufacturer LISEC, type: FR-400H, year 2019, serial no. 550-109339; buffer section system with sealing unit, manufacturer LISEC, type: VSL-10-27, serial no. 100170 with 2 buffer sections, own weight: 4500 kg; as well as separate control cabinet system with cooling unit, manufacturer RITTAL, operator panel, dosing unit, pump and valve technology; maximum working height of the system: 2700 mm. Iaodey Aqaajpfx Ag Iet

Condition: used, Year of construction: 2021, machine/vehicle number: 522-116699, comprising: frame storage, loading magazine: 15-fold, max. loading length: 6,000 mm, automatic feed, bending unit, power: 3.87 kVA, net weight: 2,530 kg, with separate control unit, type: MBF372, control cabinet with cooling unit, make: RITTAL Iajdpfjy Aqagex Ag Ist

Condition: good (used), Year of construction: 2006, functionality: fully functional, Two different sets of machines. Sold separately or together. Will sell to best offer. The two machines are: 1) Fully functional LISEC Year 2006 Insulating Line for max. Glass sizes 3500 mm. X 2700 mm. The line includes: - Washing Machine VHW-27/6 - RTV RTV-27/27MZ - Argon Press FPS-36/27US - Sealing Robot VL-1NS/27 (both SIlicone and Polyurethane) Iedeyx I E Sspfx Ag Isat - DOS DOS-1PU+SI - Spacer Bending Machine BSV-30/K - Desiccant filler A1RL - LISEC HARP Racks. In total theer are 14 Racks. 2) Cutting Machine Year 2003 model: ESL-RS-S+VB. Cuttin line is visible on the video

Condition: used, Year of construction: 2007, functionality: fully functional, total length: 3,700 mm, total width: 2,300 mm, total height: 800 mm, working height: 520 mm, input voltage: 400 V, type of input current: three-phase, Lisec tilt table UKL-35/23VM, working direction left/right, year 2007 Iodpfx Ajyxxagsg Ijat