MBM-Handel GbR

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) Gcedpex Hib Refx Ag Doa B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Technical data and information are subject to change and error; prior sale reserved.

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231109, Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high-performance CNC control series 31i-B5, 3-channel control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3), Rapid traverse speed 30 mm/min, Bar diameter max. 38 mm, Turning length max. 350 mm, Main spindle, max. speed 7,000 rpm, C-axis 0.001 degrees, Main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 degrees, Counter spindle drive power 7.5 kW Turret Speed max. 5,700 rpm, (with corresponding tool holder also higher) Turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 Coolant: Oil Weight: 6.25 tons Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high performance CNC control series 31i-B5, 3-channel-control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Y2/YA2/C2/X3/Z3/Y3), rapid traverse speed 30 mm/min, bar diameter max. 38 mm, turning length max. 350 mm, main spindle, speed max. 7,000 rpm, C-axis 0.001 deg, main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 deg, counter spindle drive power 7.5 kW Turret speed max. 5,700 rpm, (with appropriate tool holder also higher) turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (tension system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 Gcedpfx Ajx Hib Djg Doa coolant application: oil Weight: 6,25 to Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information and subject to prior sale!

Condition: used, Year of construction: 1999, operating hours: 78,000 h, machine/vehicle number: IntNr231160, IntNo231160 Machine type CNC sliding headstock automatic lathe Manufacturer STAR Model SV-20 year of construction 1999 Condition very good (used) Very well maintained machine directly from the user Machine has only run with oil Operating hours around 78,000 hours FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / C2), Bar Ø max. 20 mm Turning length max. 205 mm / 195mm, Main spindle, max. speed 10,000 rpm, C-axis, Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis, 4-fold tool holder 3 cross drilling units Godox Hibkjpfx Ag Doca Turret with 8 stations Various additional tool holders, quills, parts conveyor belt Tank capacity 170L Coolant used in the machine: oil Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm Year of construction 1999 Fire extinguishing system Kraft & Bauer / GUT fire protection Mayfran chip conveyor The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! IntNo231160 Machine type CNC sliding headstock automatic lathe Manufacturer STAR Model SV-20 year of construction 1999 Condition very good (used) Very well maintained machine directly from the user Machine has only run with oil Operating hours around 78,000 hours FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / C2), Bar Ø max. 20 mm Turning length max. 205 mm / 195mm, Main spindle, max. speed 10,000 rpm, C-axis, Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis, 4-fold tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders, quills, parts conveyor belt Tank capacity 170L Machine coolant: oil Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm Year of construction 1999 Fire extinguishing system Kraft & Bauer / GUT fire protection Mayfran chip conveyor The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, Year of construction: 2003, operating hours: 43,000 h, machine/vehicle number: IntNr231372, STAR SA 12 CNC sliding headstock lathe, year 2003 CNC control: FANUC 18i-T Operating hours: 43,000 Technical data: - Number of axes: 5 - Number of spindles: 2 Gjdpfx Aox Hia Heg Deca MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 COUNTER SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 Includes FMB Minimag bar feeder. The machine can be inspected under power by appointment. Specifications and details subject to change, error, and prior sale.

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231391, Tornos DECO 10e, built in 2007 Control: Fanuc PNC-DECO Number of axes: 7 Gcsdsx Hiayopfx Ag Doa Number of spindles: 2 MAIN SPINDLE Max. bar diameter: 10 mm Travel: 66 mm Max. spindle speed: 16,000 rpm Spindle drive power: 3.7 kW C-axis: 0.001° COUNTER SPINDLE Max. bar diameter: 10 mm Max. spindle speed: 12,000 rpm Spindle drive power: 3.7 kW C-axis: 0.001° Part removal Parts ejector Coolant tank LNS Tryton 112 bar feeder with hybrid drum The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in the technical data and specifications!

Condition: used, Year of construction: 2007, operating hours: 32,000 h, machine/vehicle number: IntNr231374, STAR SA 16R CNC sliding head lathe, year of manufacture 2007 CNC control: FANUC 18i-T Operating hours: 32,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm Gcjdsx Hiagjpfx Ag Dja - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 12 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical specifications and details are subject to change and error.

Condition: used, Year of construction: 1999, operating hours: 46,000 h, machine/vehicle number: IntNr231394, Tornos DECO 2000, year of manufacture: 1999 Control system: PNC-DECO Operating hours: 46,000 Number of PNC axes: 9 Number of spindles for driven tools: 3 MAIN SPINDLE: Maximum bar diameter: 10 mm Maximum spindle speed: 16,000 rpm C1 axis increment: 0.001° COUNTER SPINDLE: Maximum bar diameter: 10 mm Maximum spindle speed: 12,000 rpm C4 axis increment: 0.001° Oil sump Chip collection tray Gcjdpfx Agex Hh Uve Dea Parts removal unit Parts ejector Coolant tank Comprehensive toolholder package LNS Tryton SST-5 bar feeder, 3200 mm with hybrid drum The machine can be inspected under power by prior appointment. Technical specifications and details subject to change and errors. Subject to prior sale.

Condition: used, Year of construction: 2003, operating hours: 31,000 h, machine/vehicle number: IntNr231369, STAR SA 16RC CNC sliding head lathe, year of manufacture 2003 FANUC 18i-T CNC control Operating hours: 31,000 Technical specifications - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool positions: 13 COUNTER SPINDLE - Max. bar diameter: 12 mm - Spindle speed: 8,000 rpm Gjdpfsx Hh Rdsx Ag Dsca - Number of tool positions: 4 FMB Minimag bar feeder included The machine can be inspected under power by appointment. Specifications and details subject to change and error. Prior sale reserved!

Condition: used, CITIZEN CINCOM M-16 is a CNC automatic lathe engineered for precision, high accuracy and reliable operation. It features a total of 13 axes, max. turning diameter 16 mm, turning length 200 mm and internal spindle diameter 20 mm; main and counter spindles up to 12,000 rpm, driven tools up to 8,000 rpm; C‑axis resolution 0.001°. Key specs: spindle motor 2.2 kW, total power required 8 kVA, machine weight approx. 2,900 kg, overall dimensions L2450×W1320×H1700 mm; revolver turret with 10 tools. Built for high-precision production, it achieves tight tolerances and suits automotive, watchmaking, machine tool, aerospace and medical applications. Gcodpfx Agox Hfm Ae Doa

Condition: used, Year of construction: 2018, Traub TNL 32 Sliding Head Machine with Traub System TX8i-S Control, (2) x 10 Station Turrets, Collet Chuck, Turbo 3 - 36 FMB Bar Feed, Swarf Conveyor and Filtration System, Driven Tooling. S/No. 6060446 (2018) Gjdpfxjx E Tf Ro Ag Doca Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2006, CNC Swiss-Type Automatic Lathe Citizen Cincom M16 Gedpex Emnrofx Ag Deca Technical Specifications Year of manufacture: 2006 Maximum machining diameter: ø16 mm Maximum machining length: 200 mm per chucking Maximum diameter for frontal drilling: ø6 mm Maximum diameter for frontal threading: M6 Main spindle bore diameter: ø16 mm Main spindle speed: 200 to 10,000 min⁻¹ Main spindle C-axis: 0.001° Maximum clamping diameter sub-spindle: ø16 mm Maximum back-working length: 125 mm Maximum part overhang sub-spindle: 25 mm Maximum drilling diameter back-working: ø5 mm Maximum threading diameter back side: M5 Sub-spindle speed: 200 to 10,000 min⁻¹ Toolholder group: max. drilling diameter ø5 mm / max. thread cutting diameter M4 Spindle speed: 200 to 8,000 min⁻¹ Turret: max. drilling diameter ø5 mm / max. threading diameter M5 / spindle speed: 200 to 6,500 min⁻¹ Number of mountable tools: up to 21+α Axis rapid traverse speeds: 20 m/min Minimum programmable increment: 0.001 mm Axis travels: X1: 60.5 mm / Y1: 208 mm / Z1: 205 mm / X2: 107.5 mm / Z2: 133 mm / X3: 195 mm / Z3: 280 mm Main spindle motor power: 2.2 kW Sub-spindle motor power: 0.75 kW Driven tool spindle: 0.75 kW The Citizen Cincom M16 is a high-precision CNC Swiss-type automatic lathe designed for demanding series production of small and precision components. With a machining diameter up to ø16 mm, machining lengths up to 200 mm, and high spindle speeds up to 10,000 min⁻¹, this machine is ideal for complex machining tasks. The integrated C-axis on both main and sub-spindle enables precise positioning, as well as sophisticated milling and drilling operations. The machine offers extensive tool capacity with up to 21 tools and multiple driven tool stations, allowing even complex processes to be completed in a single setup. Generous axis travels and precise feed increments of 0.001 mm ensure the highest manufacturing quality with minimal tolerances. The delivery includes an LNS Express-220 bar feeder from 2011, providing automated material feed to significantly increase productivity and process reliability. Various toolholders are also included in the package. The machine is robustly built and designed for continuous industrial operation – ideal for the production of watch, medical, electronics, or automotive components. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: excellent (used), Year of construction: 2008, Miyano BX-26S CNC Lathe TECHNICAL DATA Clamping Units Collet machine with main and sub-spindle: 26 mm Max. turning length with workpiece gripper: 67 mm Maximum part length: Max. 300 mm / Ø 26 mm Clamping cylinder L/R spindle: Stationary Max. drilling diameter L/R spindle: Ø 12.00 mm Max. threading diameter L/R spindle: M8 Spindle Motor power: VAC 2.2/3.7 kW Spindle speed range L/R spindle: 80 ~ 8,000 rpm L spindle travel Z1-axis: 70.00 mm R spindle travel X2-axis: 180.00 mm R spindle travel Z2-axis: 238.00 mm Tool Slides Tool slide: Vertical linear slide Number of tool stations: 16 Number of tool stations Slide 1: 6/4 Tool shank size: 16.00 mm Inner toolholder diameter: Ø 20.00 mm Travel range X1-axis: 135.00 mm Travel range Y1-axis: 260.00 mm Number of turning tools (L spindle) X-/Y-axis: 2/2 (Use for L/R spindle) Z-axis unit: 2+2 Speed range: 100 ~ 4,000 rpm Drive motor for driven tools: 0.5 kW / 0.5 kW Max. drill diameter for driven tools: 8.00 mm Max. drill diameter with driven tool motor: M6 Tool Slide 2 Tool slide: Vertical linear slide Number of tool stations: 7 Number of tool stations Slide 2: 3/4 Tool shank size: 16.00 mm Inner toolholder diameter: Ø 20.00 mm Travel range Y2-axis: 215.00 mm Machine Dimensions Gjdjx Emmhopfx Ag Doca Machine height: 1,670.00 mm Floor space (W x D): 2,320 mm × 1,335 mm Machine weight: 3,000.00 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,138 h, functionality: fully functional, machine/vehicle number: 8107000122B, rotational speed (max.): 8,500 rpm, feed length X-axis: 70 mm, feed length Y-axis: 405 mm, feed length Z-axis: 100 mm, bar diameter (max.): 32 mm, New price: €215,000 TECHNICAL DETAILS Type of CNC control: Fanuc 32i-B Number of spindles (C-axes): 2 Number of axes: 5 Number of channels: 2 Main spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 15 min / S1): 51.9 / 40.4 Nm Power (S2 15 min / S1): 7.5 / 5.5 kW Sub-spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 30 min / S1): 23.6 / 14 Nm Power (S2 30 min / S1): 3.7 / 2.2 kW Axis data X1/Y1/Z1 Travel X1/Y1/Z1 (with turning quill): 70 / 405 / 100 (240) mm Maximum speed X1/Y1/Z1: 40 / 30 / 40 m/min Maximum acceleration X1/Y1/Z1: 5 m/s² Nominal thrust (S1) X1/Y1/Z1: 2,200 / 4,400 / 2,200 N Axis data X2 / Y2 / Z2 Travel X2 / Y2 / Z2: 300 / 135 / 200 mm Maximum speed X2 / Y2 / Z2: 40 / 30 / 40 m/min Maximum acceleration X2 / Y2 / Z2: 5 m/s² Nominal thrust (S1) X2 / Y2 / Z2: 2,200 N Toolholder data Slide 1 Number of fixed tools for internal machining: 4 + 4 Toolholder diameter: 25 mm Number of fixed tools for external machining: 6 Toolholder system: 16 x 16 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 7-9): max. 4,000 rpm Nominal torque (S3 40% / S1): 5.25 / 4.5 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Max. speed of driven tools (GEO 8-10): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Gcodpfxox Eikgs Ag Dja Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data Slide 2 Number of fixed tools for internal machining: 4 Toolholder diameter: 25 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 8-9-10-11): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data sub-spindle slide Number of fixed tools for internal machining: 2 Toolholder diameter: 25 mm Lubrication unit data Capacity: 1.8 L Operating pressure: 20 bar Idle period: 7 min Operating period: 30 s Lubricant: ENI EXIDIA HG 68 Pneumatic unit data Min. operating pressure: 5 bar Max. operating pressure: 6 bar Base machine consumption: 180 NL/min MACHINE DETAILS Dimensions: 2,309 x 1,448 x 2,087 mm Connected load: 16 kVA Weight: 3,450 kg Noise level: 75 dB(A) Power-on hours: 3,743 h Spindle hours: 2,138 h EQUIPMENT - with bar feeder 32 x 3000 mm - different channels for bar feeder - high-pressure unit - conversion kit for short turning - various collets, guide bushes, and tooling

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1275 mm Measurements depth 2711 mm Measurements height 1705mm Main Drive Spindle speed range 7000 Spindle motor power 5.5kw Stroke 310 mm Gcodpfx Agsx D Etns Dea Number of axis 3 Movement X-Axis Rapid Traverse 24m/min Y-Axis Rapid Traverse 24m/min Z-Axis Rapid Traverse 24m/min Additional Equipment With FMB bar loader The Star SR32J is sold together with an FMB trubo 3-36 stage loader. The bar loader was built in 2008, and the machine itself is from 2007. The machine features a JBS guide bushing system for increased precision thanks to flexible guide bushings. It also features a Star ER 16/ER11 front-end drilling unit with three spindles for front and rear machining. This 3-axis Star SR-32J swiss type turning machine was manufactured in 2007. It features a FANUC control system, FMB bar loader, and a maximum machining diameter of 32mm. The machine offers a rapid feed rate of 24m/min and a main spindle speed up to 7,000min. Ideal for high precision turning, it includes a coolant tank capacity of 174 liters. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6200 kg Gsdpfxex D Hgcj Ag Dsca Main Drive Spindle Speed 6000 RPM Spindle motor power 9 kW Control Unit Brand SIEMENS Model 840D (NC) This Hanwha STL45D was manufactured in 2011. It features a Siemens 840D control system, with main and sub spindles capable of 6,000 rpm and 5,000 rpm respectively. It supports a max turning diameter of Ø45 mm and includes 12 tool stations on both turrets. Additional features include a chip conveyor, product conveyor, and hydraulic brakes on both spindles. If you are looking to get high quality turning capabilities consider the Hanwha STL45D machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, Additional Equipment Mechanical and electrical preparation for fire extinguishing system Cooling system with 600l capacity and 50µm filter Pump with options of 8 or 20 bar IEMCA Boss 332E bar loader for bar length up to 3m Bristol B270/E oil mist separator Gcedpfxsx D H I Te Ag Dsa Moving headstock (80mm) with tools on slides plus tool breakage detection This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 2200 kg Measurements height 1752 mm Dimensions Machine Length 2120 mm Main Drive Spindle Speed 8000 RPM This Citizen A20 7PL was manufactured in 2009. It features a max turning diameter of Ø 20 mm and a length of 55/200 mm. Spindle speeds reach up to 8,000 rpm with 21 tool stations and rotary tools at 6,000 rpm. Includes an Iemca Boss 332 E/R bar loader. Dimensions are 2,120 x 1,226 x 1,752 mm, weighing 2,200 kg. Contact us for more information about this machine. Gjdpfx Agjx D Ic Es Doca Application Types Turning

Condition: ready for operation (used), Year of construction: 2002, operating hours: 55,004 h, Control Unit Brand FANUC Main Drive Number of axis 8 Media Chip conveyor Yes Gjdpfx Agex D Ikie Doca Additional Equipment ROBOBAR SSF automatic bar loader Motorized tools Main spindle and sub-spindle Tool holders Collets This 8-axis Tornos-Bechler Deco 20a was manufactured in 2002. A Swiss type turning machine featuring a max turning diameter of 20mm, equipped with a Fanuc control system, motorized tools, main and sub-spindle, and a ROBOBAR SSF automatic bar loader. Includes tool holders and collets. A great opportunity to buy this Tornos-Bechler Deco 20a Swiss type turning machine. Contact us for further details regarding this Swiss type turning machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 1999, operating hours: 77,888 h, Control Unit Model PNC DECO Brand FANUC Main Drive Number of spindles 2 Spindle speed range 8000 rpm // 6000 rpm Spindle motor power 7.5 kW Number of axis 10 Media Main electronic connection 400V / 50Hz Additional Equipment Bar loader: TORNOS ROBOBAR SSF-532 Some tool holders included and tool setting device is included in the offer Gjdpfxox D Ilgo Ag Deca This Tornos Deco 2000-26 Lathe was manufactured in the year 1999 in Switzerland and has 77888 production hours. It is equipped with a TORNOS-BECHLER FANUC PNC DECO control unit and has 10 axis. The machine has a spindle speed of 8000 rpm main spindle and 6000 rpm counter spindle. It comes with a TORNOS ROBOBAR SSF-532 bar loader. Contact us for more information about this lathe. Application Types Turning

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1085 mm Measurements depth 2300 mm Measurements height 1835 mm Machine weight 2220 kg Control Unit Brand MITSUBISHI Model Meldas 700 Gjdpfx Aox D Iltjg Doca Additional Equipment Swarf Conveyor LNS MH-HB FMB Minimag 20/3200 bar feeder Clamping unit Ø25 mm Pump 15 bar for rinsing the counterspindle SAU819 adapters up to Ø8 mm This 8-axis Citizen Cincom L20E-2M8 was manufactured in 2016, designed for precision Swiss-type turning, comes with FMB bar feeder and LNS chip conveyor. It features a main spindle with a speed of up to 10,000 rpm and a counter spindle operating at 8,000 rpm. The machine accommodates up to 37 tools, enhancing its capability for complex machining tasks. It includes a Mitsubishi Meldas 700 controller for efficient operation. Consider the opportunity to buy this Citizen Cincom L20E-2M8 Swiss type turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2016, operating hours: 46,976 h, Control Unit Brand FANUC Model Series Oi-TD Additional Equipment Transformer 8 KVA / Airblow through the spindle / LNS chip conveyor / Interface for high pressure coolant system with 4 M-codes Godpox D Iq Ajfx Ag Djca This Citizen Miyano GN-3200 was manufactured in 2016. It features a Fanuc 0i-TD control, an 8 KVA transformer, MAS quick change toolholders, and a collet chuck device. Additional features include an airblow through the spindle, a tool breakage sensor, a Blum measuring probe, and an LNS chip conveyor. Interface for high-pressure coolant system with 4 M-codes also included. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,530 h, Control Unit Brand FANUC Gcsdpfx Agjx D I Axj Dea Model 31i-Model B Main Drive Number of axis 3 This 3-axis Star SR-20J N was manufactured in 2019. It's a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2021, General Data Gcedpfx Asx D Nfueg Dsa Machine weight 2500–2950 kg This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, operating hours: 51,488 h, This Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine. Gcjdpfx Aox D Nhpsg Doa Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 3040 Measurements depth 1370 Measurements height 1820 Machine weight 3300 Main Drive Spindle speed range 200 - 8000 Number of axis 6 Workpiece Workpiece drm 32 mm Workpiece X 320 mm Gjdpfsx D N Euex Ag Djca Additional Equipment Complete with bar feeders, manuals, and CE conformity declaration This 6-axis Citizen C32 VIII was manufactured in 2005. Ideal for precision swiss type turning, this machine offers robust functionality and reliable performance. Consider the opportunity to buy this Citizen C32 VIII swiss type turning machine. Contact us for more information. Application Types Turning