Spot-tech

Condition: used, Year of construction: 2017, operating hours: 5,246 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,519 mm, load center: 500 mm,

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Hjdpfxjz Szcme Ag Esfn -Manufacturer: Hansa Flex, hydraulic unit type HKK0770105A045 -Motor: 5.5 kW -Pressure: up to 170 bar -Flow rate: 6 l/min -Hydraulic reservoir: 45/30l / with level indicator -Individual components: see photos -Dimensions: 945/470/H810 mm -Weight: 120 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws, stepped top jaws, top jaws -Manufacturer: Schunk, hard stepped jaws, 1 set = 3 pieces -Type: SHB-250 Jaw width 50 mm -Clamping surface: grooved -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 110/105/H67 mm -Weight: 3.4 kg Hfsdpfx Agez Szcaj Een

Condition: used, Year of construction: 2016, Used Horizon StitchLiner 6000 Saddle-Stitching System The Horizon StitchLiner 6000 is a powerful all-in-one solution for booklet production. It combines collating, scoring, folding, stitching, and three-side trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous advantages for print shops, binderies, and on-demand printing. This StitchLiner 6000 consists of the following components: - 2x VAC-80Sm Collating Towers - 1x VAC-80Sa Collating Tower - ACF-30 Accumulating and Folding Unit - SPF-30 Saddle-Stitcher - HTS-30 Three-Knife Trimmer Hedpfx Agez Szb Ne Eofn Key Features: - 24 stations (3 x 8 stations) - Inline production from collating to finished product - Variable data processing: The system can handle personalized prints and variable page numbers, making it ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Technical Specifications: - Sheet sizes: Max. 350 x 500 mm, Min. 120 x 210 mm - Paper weight: 64-300 g/m² - Processing thickness: Up to 5 mm (approx. 50 sheets of 80 g/m²) - Production speed: Up to 6,000 booklets/hour - Stitch spacing: 60-150 mm - Trimming (untrimmed): Max. 350 x 250 mm, Min. 120 x 85 mm - Trimming (trimmed): Max. 340 x 240 mm, Min. 85 x 75 mm - Power supply: 200-240V, 50/60Hz - Compressed air: 5 bar, 230 l/min - Floor space: Approx. 7,320 x 2,550 mm (without delivery) - Total weight: Approx. 2,300 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: ready for operation (used), Year of construction: 2022, pressing force: 20 t, Press brake manufactured in 2022. This DENER DDS 2090 features a bending length of 900 mm and a pressing force of 20 tons. The machine is practically unused and comes complete with tooling. If you are looking to get high-quality bending capabilities, consider the DENER DDS 2090 press brake we have for sale. Contact us for further details. • Condition: Practically never used • Status: Fully functional • Note: Practically unused machine Additional equipment Hodsz Szb Aepfx Ag Esfn • Tooling included (complete with tools) Technical Specification Bending Length 900 mm

Year of construction: 1991, condition: used, functionality: fully functional,

Condition: used,

Condition: new, Year of construction: 2026, The WL4+WF4 Machinery Moving Skate Set with a load capacity of 8 tons is designed for the horizontal transportation of heavy machinery, equipment, and industrial installations. It combines the WL4 module with a steering handle and the WF4 platform with adjustable skate spacing, creating a three-point load support system. This configuration allows the set to be adapted to the base of the transported machine and facilitates equipment relocation operations. Key Advantages of the WL4+WF4 Machinery Moving Skate Set - Total load capacity of 8000 kg – combines the WL4 module with a capacity of 4000 kg and the WF4 platform with a capacity of 4000 kg for transporting heavy industrial equipment. - Adjustable skate spacing of 50–1100 mm – allows the support positions to be adapted to the width of the machine base. - Loading height of 110 mm – low-profile design makes it easier to position the transport skates beneath a lifted load. - 900 mm long steering handle – facilitates guiding the WL4 module when moving equipment. - Three support points – enable the supports to be positioned according to the base structure of the transported machine. Construction and Manoeuvring – Machinery Moving Skates Each module is equipped with 4 rollers measuring Ø80x70 mm, providing a total of 8 rollers in the set. The identical loading heights of the WL4 and WF4 ensure a uniform load support level. The two-module design makes it easier to position the skates beneath the equipment and configure the system according to its dimensions. Hfsdpfx Asz Sza Sjg Ejn WL4 – Module with Steering Handle The WL4 provides one support point with a load-bearing surface of Ø110 mm. The module dimensions of 320x420 mm allow its overall footprint to be taken into account when planning its position beneath the machine base. The 900 mm long steering handle is used to guide the module, facilitating manoeuvring during transportation and positioning at the destination workstation. WF4 – Platform with Adjustable Skate Spacing The WF4 provides two support points, each with a load-bearing surface measuring 180x110 mm. The adjustable spacing range of 50–1100 mm allows the skate positions to be adapted to the width of the machine and the arrangement of its support points. An 860 mm long connecting bar links the platform components. The adjustable design increases the versatility of the set when handling machines with different base dimensions. Efficient Internal Transportation and Machine Positioning The WL4+WF4 machinery moving skates facilitate equipment installation and relocation operations within industrial facilities. After lifting the machine using suitable lifting equipment, the modules can be positioned beneath the designated support points. Set Contents - WL4 module – one support point, 4 rollers, and a 900 mm long steering handle. - WF4 platform – two support points, a total of 4 rollers, and an 860 mm long connecting bar. Technical Specifications of the WL4 + WF4 Machinery Moving Skate Set WL4 Roller size Ø80x70 mm Number of rollers 4 Load capacity 4000 kg Loading height 110 mm Load-bearing surface per element Ø110 mm Support points 1 Steering handle length 900 mm Overall length 320 mm Overall width 420 mm WF4 Roller size Ø80x70 mm Number of rollers 4 Load capacity 4000 kg Loading height 110 mm Load-bearing surface per element 180x110 mm Support points 2 Connecting bar length 860 mm Adjustable skate spacing 50–1100 mm

Condition: good (used), Year of construction: 2000, pressing force: 80 t, bale width: 1,100 mm, bale height: 720 mm, noise level: 85 dB, oil tank capacity: 900 l, empty load weight: 24,000 kg, operating pressure: 250 bar, For sale: a Bollegraaf 80A baler from the year 2000, including a feed conveyor. The machine is in working condition and is still in use. The machine is currently located in Belgium and can be viewed by appointment. The machine is equipped with a pre-compression flap, cross-tying with horizontal wires, and is powered by a 45 kW main pump. The feed conveyor has a working width of 1500 mm. Hfsdpfjz Sza Eox Ag Ejn

Condition: used, Used APV Rannie Blue Top 30/60 Homogenizer – Stainless Steel – 2-Stage High-quality APV Rannie “Blue Top” homogenizer, model 30/60, designed for reliable and efficient homogenization in dairy and food processing applications. This unit features a 2-stage homogenizing system, ensuring optimal particle size reduction and stable product consistency. The robust stainless steel construction makes it ideal for hygienic production environments. Technical details: Manufacturer: APV Rannie Model: Blue Top 30/60 Configuration: 2-stage homogenizing valve Motor power: 15 / 18 kW Plunger diameter: 30 mm Connections: approx. 1" – 1.5" Material: Stainless steel Performance: Estimated capacity: approx. 1,500 – 2,000 L/h Working pressure: up to approx. 150–250 bar (depending on product and operating conditions) Model: Blue Top 30/60 Configuration: 2-stage homogenizing valve Motor power: 15 / 18 kW Hfedpsz Szaxsfx Ag Een Plunger diameter: 30 mm Connections: approx. 1" – 1.5" Material: Stainless steel Manufacturer: APV Rannie

Condition: used, Year of construction: 1997, Hermle U 630 T 3-axis universal CNC milling machine Hermle 3-axis universal CNC milling machine Type/Model: U 630 T Condition: Used Year of manufacture: 1997 Technical data: Tool holder: SK 40 Tool changer: 16-position Travel ranges X/Y/Z: 630 mm x 500 mm x 500 mm Spindle speed range: max. 7000 rpm Quill stroke: 75 mm Work table Clamping area: 900 x 528 mm Max. load: 400 kg Total connected load: 14 kW Control system: Heidenhain TNC 430 Dimensions L/W/H approx.: 2.30 m x 2.10 m x 2.10 m Weight approx.: 4,800 kg Hfsdpfxez Szars Ag Een

Condition: used, Year of construction: 2013, The industrial filtration system is used for suction and filtration of oil mist, emulsion mist and suspended solids from the air, as they arise during metal processing. The multistage filter system cleans the intake air and contributes to the improvement of air quality in the workplace. Mains connection: 400 V Hfsdpfxez Szalo Ag Ejn Frequencies: 50 - 60 Hz power consumption: 1.5 A at 60 Hz engine power: 1,15 kW

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 14,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 1,000 mm, position of the milling head: Pickup station, spindle diameter: 160 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, quill travel distance: 1,000 mm, quill stroke: 1,000 mm, quill diameter: 160 mm, BOSTRAM 160 CNC SIEMENS 840D Powerline. Manufactured in 2005. Tool changer station for cutting heads. Universal cutting head. Right-angle cutting head. X = 14,000 mm. Hsdpfxoz Szafj Ag Ejfn Y = 5,000 mm. Z, ram = 1,000 mm. W, spindle = 1,000 mm.

Condition: new, Year of construction: 2026, The WLTB300 Transport Trolley with a load capacity of 300 kg and a lifting height of 900 mm is designed for lifting and moving loads in workshops, warehouses, and production facilities. The mast structure with a lifting fork assembly enables components to be positioned for assembly, transportation, and transfer at workstations. Combining lifting functionality with a mobile chassis reduces the need for manually handling heavy components. Key Advantages of the WLTB300 300 kg Transport Trolley - Load capacity of 300 kg – enables the handling of machine parts, transport crates, and workshop equipment. - Lifting height of up to 900 mm – makes it easier to position loads at the required height for transfer or preparation for further operations. - Forks measuring 535 mm in length and 80 mm in width – provide two support points when picking up and lifting transported components. - Maximum fork spacing of 520 mm – allows the fork positions to be adjusted to the width and base structure of the load. - Large Ø250x60 mm wheels – facilitate manual transportation of the trolley between workstations. - Compact dimensions of 830x730x1240 mm – simplify workspace organisation and storage of the device. Mast Structure and Hydraulic Lifting Mechanism The WLTB300 lifting trolley features a hydraulic cylinder operating in conjunction with a chain system. The mechanism raises the fork carriage along the vertical mast guides, allowing the load support height to be adjusted. This design makes it possible to pick up components from a low level and position them for transfer at a workstation. The maximum lifting height of 900 mm expands the trolley's range of applications in assembly and maintenance operations. The operator can raise a component to a height suitable for the task being performed, reducing the need for manual lifting. The device supports material handling from the moment a load is picked up until it is delivered to its intended location. Adjustable Forks for Different Loads Each fork measures 535 mm in length and 80 mm in width. The ability to adjust the fork spacing up to 520 mm makes it easier to position the supports according to the base of a crate, component, or other transported item. The open space between the forks allows the operator to monitor their position when approaching a load, helping ensure accurate trolley positioning before lifting. Low Load Pickup Height The minimum lifting height is 100 mm. The low position of the lowered forks makes it easier to pick up items with sufficient ground clearance, including crates with feet and components placed on supports. This allows loads to be prepared efficiently for lifting without the need to manually transfer them onto a higher surface. Equipment and Structural Components Hfsdpfsz Sy U Uex Ag Een - Mast with a vertically guided fork carriage. - Hydraulic lifting mechanism with a chain system. - Forks measuring 535 mm in length and 80 mm in width. - Chassis with large Ø250x60 mm wheels. - Handles for manually manoeuvring and positioning the trolley. Technical Specifications of the WLTB300 Transport Trolley Load capacity 300 kg Minimum lifting height 100 mm Maximum lifting height 900 mm Fork length 535 mm Maximum fork spacing 520 mm Fork width 80 mm Wheel size Ø250x60 mm Overall length 830 mm Overall width 730 mm Overall height 1240 mm Weight 53 kg

Condition: good (used), Year of construction: 2009, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 760 mm, roller (top) diameter: 840 mm, side roll diameter: 610 mm, sheet thickness (max.): 100 mm, overall weight: 130,000 kg, total length: 7,500 mm, total width: 3,250 mm, total height: 4,250 mm, Equipment: cone bending device, hardened rollers, 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9183 Make: HAEUSLER Type: VRM-HY YOP: 2009 Force lower rol upper roll 1178 Ton Cone bending attachment Hardned and grounded rolls Hodpfsz Sy U Isx Ag Ejfn Width between upper and lower roll 200 mm Power 180 kW Rolling width: 3050mm Rolling thickness 3x toproll Ø:90mm Rolling thickness 5x toproll Ø:100mm Rolling thickness prebending: 80mm Top Roll Ø: 840mm Bottom Roll Ø: 760mm Side roll Ø: 610mm Number of rolls: 4 Rolling speed: 1,5 / 3 / 4,5 / 6 M/Min Adjustiment lower roll: 0 - 300mm/min. Number of driven rolls: 2 Power: 180kW Length: 7500mm Width: 3250mm Height: 4250mm Weight: 130000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2021, Model: M-900iB/330L Year of manufacture: 2021 Type: A05B-1335-B213 Serial number: R21Y20066 Maximum payload: 330 kg Maximum reach: 3203 mm Number of axes: 6 Repeatability: ±0.10 mm Vertical reach: 3539 mm Hsdpez Sy Uhofx Ag Eefn Weight: 1780 kg Controller: FANUC R-30iB Plus

Condition: new, Year of construction: 2026, The WLT-T Transport Trolley with Pneumatic Wheels and a load capacity of 200 kg is designed for lifting and moving loads in warehouses, workshops, and production facilities. It combines a mast structure with load forks and a compact chassis, facilitating material handling at workstations. The 250 mm diameter pneumatic wheels help absorb vibrations during movement, improving comfort when manually manoeuvring the trolley. Key Advantages of the WLT-T 200 kg Transport Trolley - Rated load capacity of 200 kg – enables the handling of components, crates, and equipment during transport and assembly operations. - Large Ø250 mm pneumatic wheels – help absorb vibrations generated during movement and make the trolley easier to manoeuvre. - 535 mm long forks – provide stable support for loads during lifting and transportation. - Lowered fork height of 65 mm – makes it easier to pick up loads with limited ground clearance. - Overall width of 540 mm – facilitates manoeuvring around workstations and reduces the space required for storing the trolley. - Lifting and transportation in one device – helps reduce the need to manually carry heavy components between successive stages of work. Mast Structure and Load Handling Forks The WLT-T lifting trolley features a vertical mast that guides the fork assembly, allowing the load support height to be adjusted. The design combines lifting functionality with a mobile chassis, making the trolley suitable for both delivering materials and positioning them at workstations. Two handles provide the operator with a comfortable grip when manually moving and positioning the trolley. 535 mm Long Forks with a Maximum Spacing of 515 mm The forks consist of two separate support elements for the transported load. Their length of 535 mm and maximum spacing of 515 mm allow the trolley to handle loads with dimensions suited to the available support surface. The open design makes it easier to monitor the position of the forks when approaching a load and aligning it with the workstation. Low Fork Height in the Lowered Position The initial fork height of 65 mm makes it easier to slide the forks beneath items positioned close to the floor. This is particularly useful when handling crates with feet, components mounted on supports, and equipment with sufficient clearance for fork insertion. The low support height simplifies load positioning before lifting and further transportation. Hjdpfx Asz Sy T Rsg Eefn Pneumatic Wheels – Improved Manoeuvring Comfort The transport trolley with pneumatic wheels uses the flexibility of its tyres to reduce vibrations transmitted from the floor to the chassis. Large wheels with a diameter of 250 mm facilitate smooth movement over hard surfaces, which is particularly important during frequent transportation between workstations. Equipment and Structural Components - Mast structure with a lifting fork assembly. - Load forks with a length of 535 mm. - Large pneumatic wheels with a diameter of 250 mm. - Small front wheels with a diameter of 50 mm. - Handles for manually manoeuvring the trolley. Technical Specifications of the WLT-T Transport Trolley Rated load capacity 200 kg Maximum fork spacing 515 mm Fork length 535 mm Fork height in lowered position 65 mm Overall length 860 mm Overall width 540 mm Overall height 1210 mm Large wheel diameter 250 mm Small wheel diameter 50 mm Weight 48 kg

Condition: excellent (used), Year of construction: 2001, spindle bore: 150 mm, spindle motor power: 95,000 W, total height: 3,800 mm, total length: 16,000 mm, total width: 5,000 mm, overall weight: 80,000 kg, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Hfsdpfez Sy Twex Ag Eon Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 25607, Year of construction: 2016, operating hours: 10,368 h, load capacity: 3,000 kg, lifting height: 5,330 mm, free lift: 1,644 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, Equipment: cabin, sideshift, .: 25607 Device details: Year of manufacture: 2016 Load capacity: 3000 kg Lifting height: 5330 mm Recorded operating hours: 10368 h Free lift: 1644 mm Mast type: Triplex Mast height: 2460 mm Length/Width/Height: 2528 / 1228 / 2228 mm Operating weight: 5694 kg Battery from: 2016 ---- Equipment: * Overhead guard * 3rd valve Hfjdsz Sy Tqopfx Ag Esn * 4th valve * Full cabin * Full free lift * Heater * Air conditioning * Non-marking tires * Bluespot ----- Attachments: * Side shifter * Fork positioner ---- Additional device information: Ready for operation, as returned by the customer. The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Subject to prior sale and errors in this offer. In dealer sales, the device is sold in its current condition, without refurbishment. All information is without guarantee, subject to errors and changes.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 300 mm, travel distance Z-axis: 900 mm, total height: 5,800 mm, total width: 5,500 mm, overall weight: 26,000 kg, controller manufacturer: FANUC, controller model: 0i-TC, product length (max.): 7,200 mm, number of axes: 2, Vertical turning machine manufactured in 2009. This SMTCL QTC 20090 features a maximum turning diameter of 2,000 mm and a turning height of 1,600 mm. It includes a manual 4-jaw chuck with a diameter of 1,600 mm and a 12-position tool changer magazine. If you are looking to get high-quality turning capabilities, consider the SMTCL QTC 20090 machine we have for sale. Contact us for further details regarding this machine. • CNC control: FANUC 0i-TC with 10.4" screen • Mobile vertical crossbar with 5 indexing positions Hjdez Sy Tkjpfx Ag Ejfn • CE safety equipment • Manual 4-jaw chuck diameter: 1,600 mm • Maximum turning diameter: 2,000 mm • Maximum turning height: 1,600 mm • Chuck speed: 1–254 rpm (2 ranges) • Motor power: 55 kW (30-minute rating) • RAM cross-section: 220 × 220 mm • 12-position tool changer magazine • Electrical supply: 380 V ±10% Additional equipment • Direct measurement system: HEIDENHAIN • RENISHAW tool presetting system • Turning tool holder • Chip extractor • Work light • Access cover and stairs Technical Specification Driven Tools No

Condition: excellent (used), Control: Fanuc Oi-MF Plus Working area X-axis 510 mm Y-axis 400 mm Z-axis 350 mm Machine table Table size 600 × 400 mm T-slot size 18 × 3 mm Table load 250 kg Tool magazine Magazine positions 16 positions Tool coding Variable position coding Max. tool length 200 mm Max. tool weight 3 kg Max. tool diameter 68 / 100 mm Spindle Main drive 3.7 / 13 kW Spindle speed 12,000 rpm Spindle taper BT30 Drive type Direct drive Feed rate Rapid traverse X-axis 60 m/min Rapid traverse Y-axis 60 m/min Rapid traverse Z-axis 60 m/min Hfsdpfx Agsz Sy Tds Esn Axis drives Drive system AC servo motors Control Frequency-controlled Feed motor X-axis 1.8 kW Feed motor Y-axis 1.8 kW Feed motor Z-axis 3.0 kW Guidance systems Double V-ball linear guides Rails in all axes General data Width 1,700 mm Depth 2,600 mm Height 2,700 mm Machine weight 2,850 kg Compressed air connection 6 bar Operating fluids Hydraulic oil ISO VG 32 Lubricating oil ISO VG 10

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 054390, measuring range X-axis: 1,500 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,200 mm, Manufacturer: Wenzel Model: LH 1512 Serial No.: 054390 Year of manufacture: 2005 Measuring software: Quartis Measuring volume X/Y/Z mm: 1500mm/2500mm/1200mm Control panel: HT400 Probing system: PH10M / TP200 Control system: WPC 2040 Supply: 6 bar Power requirement: 230 V Accuracy: E0, MPE 3.7 µm + (L/250mm) PForm.Sph.1x25:SS:Tact 3.7µm Machine weight: approx. 12500 kg Workpiece weight: approx. 3750 kg Space requirement CMM: L ≈ 4000mm / Width ≈ 2560mm / Height ≈ 4030mm Equipment: Active damping Accessories: Ball standard, probe changer SCR200 Condition: Used, regular maintenance performed Options: DAkkS – Calibration possible The machine can be modernized with new accessories according to customer requirements. Hfodpfxsz Sy S To Ag Esn Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Condition: used, Year of construction: 2008, Suitable for cleaning coolant- and oil-containing grinding mist. Blower capacity: 2400m³/h Suction power: up to 1200 m³/h noise level: 75 dB A Pressure differential: 840 Pa Connection value: 6kW (230V/50HZ) Dimensions W x D x H =: 800 x 625 x 610 mm Weight approx: 100 kg colour: Gray Hfsdpfx Aoz Sy Syog Eon

Condition: used, Year of construction: 2011, The machine was used in a juice bottling line and is in working order. Hfodpfx Agoz Sy Sts Ejn The machine is used for applying and heat-shrinking PVC shrink film onto jars or bottles. Year of manufacture: 2011 Weight: 2500 kg Capacity: up to 24,000 bottles per hour.

Condition: used, mileage: 293,050 km, power: 210 kW (285.52 HP), first registration: 07/2009, fuel type: diesel, empty load weight: 6,185 kg, overall weight: 15,000 kg, tire size: 285/70 R19,5, axle configuration: 2 axles, wheelbase: 4,800 mm, next inspection (TÜV): 04/2027, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space volume: 9 m³, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 500 mm, Equipment: ABS, AdBlue, EBS, air conditioning, cruise control, differential lock, parking heater, traction control, trailer coupling, Urea tank (AdBlue) Engine displacement: 6,374 cc 40 mm trailer hitch Hfodpoz Sy Sgsfx Ag Ejn Low noise Payload: 8,815 kg Sun visor Air and electrical connections for trailer operation Center seat VIN: 1L439536 Errors and omissions excepted