Connect Solar Photovoltaiksysteme GmbH

Year of construction: 1988, condition: used, Manufacturer: Jungheinrich TYPE: EFG115 -350 ZT Serial No. 799 74 2196 Drive type: Electric Type No. 869 3000 Load capacity: 1,600 kg Battery weight: 900 kg / 945 kg Battery: 24V Year of manufacture: 1988 Pgjdpoz Hcqajfx Af Set UVV tested. We are selling the forklift because we are moving and do not have the possibility to transport it to the new location. We purchased it about a year ago as a temporary solution, but overall, we have only used it a few times, as it is located at our second site. The forklift is functional, but the battery needs to be checked. You are welcome to inspect and test the forklift after arranging an appointment in advance. The goods are sold as is, with no warranty of any kind.

Year of construction: 2012, operating hours: 220 h, condition: ready for operation (used), functionality: fully functional, Complete vertical roller mill manufacture FLSmidth ATOX 42.5 model 2012 used condition working condition included mill main motor gearbox Hydraulic system complete structure video and photo available Pgsdez Hb Svjpfx Af Sot

Condition: used, mileage: 300,224 km, first registration: 09/2003, overall weight: 37,000 kg, fuel type: diesel, color: green, axle configuration: 4x2, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, Year of construction: 2003, operating hours: 1,800 h, Disab Centurion P210/9 Year: 2003 Pgjdpfxsz Ezbne Af Set Vacuum and blowing system

Condition: like new (used), functionality: fully functional, Year of construction: 2025, load capacity: 40,000 kg, lifting height: 800 mm, tire condition: 100 %, Special design / unique item: mobile crane portal for loading and unloading machines and vehicles from low-bed trailers, or as a boat lift in a dry dock, 3-meter clear width, variable hook height, 800mm self-travel, expandable lifting stroke by 1200mm with lifting systems of 4 x 6.5 tons, statically loadable up to 40 tons, adjustable crossbeam, mobile load capacity of 10 tons, electro-hydraulically driven steering chassis, suitable for use on level, smooth concrete surfaces. Pjdpfx Afjz Ekm Ho Sogt

Condition: used, Year of construction: 1996, functionality: unexamined, Used hydraulic unit from a Windsor injection molding machine, consisting of: - Electric motor Schorch KA7315M-BB03F-Z, manufactured in 1996, with 132 kW - Hydraulic pump Sauer, type 88P 226-197 LF - Reservoir tank with oil cooler, filters, and hydraulic block - Corresponding Lenze inverter in a suitable control cabinet Psdpfx Ajz D S Enef Segt Please refer to the attached images for further details. Collection in 42781 Haan, loading with a crane is possible.

Year of construction: 2020, operating hours: 15 h, condition: like new (used), functionality: fully functional, number of chambers: 1, laser hours: 6 h, laser power: 220 W, laser wavelength: 1,064 nm, protection type (IP code): IP20, machine/vehicle number: 100102440/49, laser source manufacturer: Coherent, laser source model: Nd:YAG, Equipment: CE marking, We offer this Coherent laser, model Integral, in like-new condition, manufactured in 2020. Manufacturer: Coherent Model: Integral Year of manufacture: 2020 Condition: like new Category: 33 Pgodpfxoz A Tcxs Af Sst Type: Class 4 laser Laser type: Nd:YAG Source: Flash lamp DIN EN 60 825-1:2008-05 MADE IN GERMANY 21CFR 1040.10 / 1040.11 If you have any questions or require further information, please send us a message or contact us by phone.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control Pgsdpjz Ag Rrsfx Af Sot - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: Podsz Agw Espfx Af Ssgt - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Pgodpfx Ajz Agv Ujf Set - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Pgsdpozz Rpcefx Af Sst - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2441.05, cutting force: 1,122 t, total width: 9,000 mm, total length: 19,000 mm, total height: 5,700 mm, overall weight: 320,000 kg, operating pressure: 350 bar, loading space height: 1,800 mm, cutting width (max.): 810 mm, DGUV certified until: 11/2026, ejection height: 850 mm, filling opening length: 7,500 mm, filling opening width: 2,300 mm, The described scrap shear from Leimbach, including the associated conveyor belt, is for sale. The machine is in operation. An inspection at our facility is possible by prior arrangement in 68219 Mannheim. In addition to the existing oil filtration system, an electrostatic oil purification system from Kleentek has been installed. The machine is available upon agreement. Further information is available upon request. Delivery terms: EXW Mannheim, Rheinauhafen. The dismantling of the goods and its subsequent loading onto the means of transport will be carried out at the buyer's expense and risk. Pgodozzxbtspfx Af Sst The selling price and delivery terms are negotiable. The sale is exclusively to commercial customers. This offer is non-binding and is subject to a technical and legal review as well as a contractual agreement between the parties.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: B05-991, We offer this ready for use Zahoransky V10 Zahoransky B05-991, year of construction not specified. Manufacturer: Zahoransky Model: V10 Condition: ready for use Category Id: 33 Type: Zahoransky B05-991 Vertical manual brush tufting machine, Zahoransky type V10 Stoke: 100mm Psdszzrpqopfx Af Sogt Fillament length: 210mm unfolded, processing synthetic and natural filaments Fillament boxes: 1 color Tufting tool: 7.0 mm and 10.0 mm ( one tool set included ) Condition: ready to operate If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg Podpjzzp Ttofx Af Sjgt • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2024, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, overall weight: 4,500 kg, input voltage: 400 V, Equipment: documentation/manual, For sale is a Himel / Gama pellet press for straw / hay / alfalfa, optimized! According to the manufacturer, it has a capacity of 700 - 1200 tons per hour, depending on the biomass! The press was installed as a temporary solution because identical models were undergoing a complete overhaul. Pgedpezzf D Iofx Af Sst

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Year of construction: 2014 (New, never used) Pedpfx Ajzy Ruief Sogt Power: 30 kW (see photo for more technical details)

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, Rent Your Vacuum Solution Facing a work peak or a temporary challenge in your operations? From industrial vacuum cleaners to vacuum loaders, available to rent for the long or short term — safe, easy and flexible. Vacuum Loader for Suction and Blowing The DISAB Centurion™ P20 is a flexible vacuum truck with extensive configuration options. It's designed for both suction and blowing of wet and dry materials, working horizontally or vertically, and its powerful absorbency makes it a strong fit across a wide range of industries. Vacuum Unit for Wet and Dry Material The DISAB Centurion™ P20 is built around a permanently mounted engine room housing a vacuum pump powered by the truck's own engine. The vacuum unit adapts to a wide range of applications and is available with numerous options. Its round tank, offered in several sizes, makes it equally suited to wet and dry materials. The unit is trusted by customers across industries including cement, energy, steel, foundry, contracting, and heating plants. Details - Engine: Volvo, 345 kW (469 hp) - Operating mode: Diesel - Delivery terms: FCA - Certificate: CE Pgsdpfx Aozy Izmsf Sot - Country of manufacture: Sweden - Condition: Unused / Demo unit, 1 operating hour Rental Regions: Blekinge, Dalarna, Gotland, Gävleborg, Halland, Jämtland, Jönköping, Kalmar, Kronoberg, Norrbotten, Skåne, Stockholm City and County, Södermanland, Uppsala, Värmland, Västerbotten, Västernorrland, Västmanland, Västra Götaland, Örebro, Östergötland Rental Details Price per day: Price on request Price per week: Price on request Price per month: Price on request We do not operate in Bolivia, Greece, Hungary, Latvia, Lithuania, Romania, Russia, Serbia, Slovenia, or the United States.

Year of construction: 2002, condition: used, functionality: limited functionality, Sand processing plant for the production of high-quality sand with a grain size of 0-2 mm. For sale is a complete sand processing plant from the Rheinstetten-Forchheim gravel and sand works of Heidelberg Materials Mineralik DE GmbH. The plant was used for cleaning sand, removing organic contaminants, and producing sand with defined quality characteristics. Key technical data: Throughput capacity up to 200 t/h Processing of sand 0-2 mm Production of controlled sand 0-2 mm allflux® AFX-F 750 fluidized bed classifier Solid material throughput up to 200 t/h Mixture volume approx. 375 m³/h Machine weight approx. 8 t allflux® AFS-F 500 eddy current classifier Solid material throughput up to 60 t/h Grain size 0-0.25 mm Fine sand recovery with hydrocyclones 3 dewatering screens for fine, medium-fine, and coarse sand Podpezx Uytjfx Af Ssgt Reversible conveyor belts Silo system with 6 buffer silos, each with a capacity of 220 m³ Dosing system with 8 dosing belts and 8 electric discharge gates Scope of supply: allflux® AFX-F 750 fluidized bed classifier Fine sand recovery with hydrocyclones and arch screen allflux® AFS-F 500 eddy current classifier 3 dewatering screens Fine sand recovery for coarse sand Fine sand recovery for medium-fine sand Conveyor technology Silo system Dosing system

Year of construction: 2025, operating hours: 250 h, condition: excellent (used), functionality: fully functional, Rent Your Vacuum Solution Work stoppage or a temporary challenge in your business? Pgodpezx N N Aefx Af Sjt From industrial vacuum cleaners to vacuum loaders, rent short or long term — safe and simple. Need a flexible solution without the commitment of ownership? DISAB SkipVAC™ is available to rent, giving you the same powerful suction and high collection capacity on a temporary basis — ideal for short-term projects, seasonal peaks, or general cleaning campaigns across your industry. DISAB SkipVAC™ is easy to move, empty and use, making it useful in more places across your facility — indoors or outdoors. Compact and user-friendly, it becomes a reliable partner in daily clean-up work, reducing dust and particles in the work environment without wearing on the body. DISAB SkipVAC™ is optimal for temporary suction needs such as general cleaning, spillage collection, and waste removal across most industrial and factory environments. Material is drawn into the settling chamber of the filter separator, where heavier debris falls to the bottom of the dust container while air passes through the main filter, capturing dust particles for a cleaner working environment. The container-like body is easily emptied — the upper part lifted off by forklift, with the collected material transported to the emptying site.

Year of construction: 2025, condition: like new (used), Cement silo + electric motors Volume = 80 tons of cement February 2025 Adjustable spout Pedpfx Afjzxca Uj Sjgt Inspection possible

Condition: used, Year of construction: 2010, fuel type: diesel, power: 88 kW (119.65 HP), gearing type: mechanical, color: white, number of standing places: 3, Equipment: 3rd hydraulic function, ABS, airbag, all-season tires, lighting, trailer coupling, I am offering a Peugeot Boxer diesel panel van, 2.2 / 88 kW, first registered in July 2010, with 171,000 km, a 6-speed manual transmission, and a trailer hitch. It is being sold because I am switching to different technology. !The vehicle does not have a valid MOT (technical inspection), is registered, and is ready to drive. Psdpfxezwmfrj Af Sjgt It has green license plates! The vehicle is equipped with a belt-driven auxiliary drive and a Dynaset HPW hydraulic high-pressure water pump. It includes a high-pressure cleaning system up to 180 bar, a high-pressure lance, a 1000-liter tank, and automatic hose retraction. Signs of wear are present.

Condition: used, Digital color printer, Roland Versa UV LEF2-200 Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us. Pgodpfxjzv Sncj Af Set

Year of construction: 2020, condition: excellent (used), 2020 Coherent EasyJewel 5 Premium Desktop Class 1 Fibre Laser Marking and Engraving System With Rotary Axis The Coherent EasyJewel 5 Is A Premium Desktop Class 1 Fibre Laser Marking & Engraving System Designed Primarily For Jewellery, Watches, Medical Devices, Precision Engineering & Small Industrial Components. It Is Capable Of High-Resolution Engraving, Deep Engraving, Annealing, 2D Code Marking, Optional 3D Engraving Using Coherent's Laser Suite Software. Chamber Dimension W300 x D200 x H120mm. Marking Field Options Standard Lenses Include Fields Like 120 x 120mm, 180 x 180mm, or 240 x 240mm. Pulse Width 4 to 200ns. Pilot Lase: 660nm (Visible Red Guide). 'Z' Axis Travel 120mm. Voltage 230V. S/No. 40475422 (2020). Pgjdpfozvpy Nsx Af Sjt With BOFA Extraction & Filtration Unit, Laptop With Software, EasyJewel Special Ring Holders, EasyJewel Chuck For Bangle/Bracelet Marking & EasyJewel Chuck For Irregular Shaped Rings. Overall Dimensions L770 x W540 x H750mm. Weight Approx. 87kg.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 28464, overall weight: 2,300 kg, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CAT 500 cutting center – an automatic machine designed for cutting PVC profiles using a circular saw. Numerical control with dedicated software allows for programming processing parameters, limiting the operator's tasks to loading profiles and collecting finished parts. Saw parameters: - Arbor: Ø 30 mm - Diameter: Ø 500 mm - Rotational speed: 3000 rpm - Max. saw blade thickness: 4.2 mm Technical data: - Voltage: 380–400 V AC3PE - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW - Air pressure: 7 bar - Weight: 2300 kg Standard equipment: - Tungsten carbide saw blade Ø 500 mm (arbor Ø30) - Welded frame with adjustable feet and the possibility of mounting to the floor - Industrial computer integrated with the machine - Infeed belts with inverter control and programmable acceleration/deceleration ramps - Label printer Pgjdpfx Afjzvmh Ro Set Dimensions: - Infeed: 7900 mm - Machine: 1000 mm - Outfeed: 2600 mm - Max. width: 2300 mm - Max. height: 1700 mm - Overall length: 11500 mm

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Horizontal mixer, manufactured by Ahlmer Length: 2950 mm, Width: 1350 mm, Height: 1525 mm Capacity: 5.2 m³, Usable volume: 4 m³ Chain drive Motor: 5.5 kW (frequency-controlled) Pgjdpfezvammox Af Set Mixing paddles Discharge via screw conveyor (frequency-controlled) With weighing unit Control cabinet Lid with hand winch Discharge slide

Year of construction: 2010, condition: used, functionality: fully functional, We are offering this used AWETA GS DV-D 14+1 sorting machine for cucumbers (or zucchini), manufactured in 2010. Machine type: GS DV-D 14+1 Serial number: 60795-01 Year of manufacture: 2010 Pgsdpfxozu H Uhj Af Sjt Description: The system sorts approximately 18,000 cucumbers per hour. Optionally, automatic emptying of the crates, including the removal of the full crates, is also available. Not included in the sale: Palletizing and strapping machine. If you have any questions or require further information, please feel free to send us a message or call us.