Achte display system GmbH

Year of construction: 2007, condition: used, Supply voltage: 1~ 230V AC, rated current: 16A, mains frequency: 50Hz, connected load: 0.64kA, CE marking. On-site inspection is possible. Isdpfxez R Uwvo Ahbetn

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Itedpfxez Rn Dnj Ahbon

Year of construction: 2000, condition: used, functionality: fully functional, We offer these used USF sandblasting and painting booths, model 2 sandblasting booths and 1 painting booth, manufactured in the year 2000. Manufacturer: USF Model: 2 sandblasting booths and 1 painting booth, 12 meters x 5 meters x 5 meters Year of manufacture: 2000 Condition: Used Category ID: 227 Type: 2 sandblasting booths and 1 painting booth, with dimensions of 12 meters long, 5 meters wide, and 5 meters high. The entire unit is in working order and comes with operating accessories. It is available for dismantling on-site (in the Var department, 83) from mid-December. Dismantling and removal are the responsibility of the buyer. Iedpsz I T Nvjfx Ahbotn If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Oven OMIA SECOMAT V-10 Maxi temperature: 160° Isdpez I Df Iefx Ahbstn Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: E11809025, For sale: OTEC fine polishing machine - Model: ECO 1 X 18 - Serial number: E 118/09025 - Year of manufacture: 2009 - Weight: 50 kg The machine has been regularly serviced and maintained and is in excellent condition. It has seen very little use and is practically new. It is suitable for the fine polishing, cleaning, and deburring of highly demanding parts that have undergone various machining processes. Workpieces are placed in the processing bowl along with media (granulate) and coolant; the bowl both rotates and vibrates, resulting in a polishing effect. The machine operates fully automatically, allowing for the adjustment of polishing time, vibration frequency, and rotation speed. It is connected to the power supply and ready for immediate operation. Itedpfxsz Iyn Eo Ahbjn

Year of construction: 2006, condition: excellent (used), functionality: fully functional, machine/vehicle number: 70/060260, For sale: OTEC fine polishing machine Itodpfjz Iym Usx Ahbjn - Model: DF 70 - Serial no.: 70/060260 - Year of manufacture: 2006 - Power: 2 kW - Weight: 450 kg ADDITIONAL EQUIPMENT - Coolant tank - Automatic polishing paste dosing system - Printer (for reports) - 10 tool holders - 1 mixer holder For sale: a machine for the fine polishing of various metal parts following machining processes. It can also be used to clean heavily soiled or stubborn surfaces on parts made from various materials. The machine is fully automatic and features an additional coolant tank, which prevents the polishing media and the parts from overheating, allowing for continuous operation of 10 hours or more. Workpieces are polished by being fully or partially submerged in the polishing media, ensuring even contact across all surfaces, including the deepest and most hard-to-reach areas. The machine has seen very little use and has been regularly maintained. It is connected to the power supply and ready for immediate operation.

Condition: used, A shot blasting machine is offered. Equipped with an overhead rail system. Inspection possible by arrangement. Iedpfx Ajz Irmgohbetn

Condition: good (used), 1 x Drum polishing machine Uron (Werner Uhlig/Pforzheim) Iodpfx Aoz H H Tfohbotn UT 1 in excellent condition. Accessories: 1 x Drip tray 3 x various polishing stones The machine can be inspected while powered on.

Condition: used, Year of construction: 2003, Supfina type 620 polishing machine with Siemens Simatic OP7 PLC with inspection & spare grinding belts. Foot print L2,130 x W1,280mm. Approx. weight: 1,500kg. Itodpfx Ahez Hz Abebsn

Condition: good (used), 1 x Trowaisiertrommel (Trowaising drum) Mafag VEB SG 2 A with timer automatic lowering/lifting Itsdpfx Ajz Hurpjhbon The machine can be inspected while powered on.

Condition: used, Sandblasting cabinet Iedpfx Aoz Hmb Nehbjtn Manufacturer: ELMAG Type: PAL-2N Year of manufacture: unknown Maximum workpiece size: approx. 50 x 70 x 50 cm Cyclonic separator for abrasive media recovery Compressed air injector nozzle P/3 Tungsten carbide blasting nozzle Safety foot pedal (start-stop) Extraction fan Dust filter bag P/3 injector, Ø 3 mm: 600 l/min air flow rate P/3 injector, Ø 3.5 mm: 800 l/min air flow rate P/3 injector, Ø 4 mm: 1,200 l/min air flow rate P/4 nozzle diameter: 6 / 8 / 10 mm Dust-tight cover with quick-release fasteners Simple workpiece positioning Voltage/frequency: 400 / 50 V/Hz Cabinet interior dimensions: 60 x 88 x 78 cm Dimensions: 1,150 x 980 x 1,900 mm Weight approx.: 120 kg 51026ä

Year of construction: 2016, condition: used, A mass finishing system with dosing equipment is offered. Operator panel on the control cabinet. Equipped with dosing unit, control cabinet, safety enclosure, stairs and conveyor chute. Inspection possible by prior arrangement. Itsdpjz Hlxaofx Ahbsn

Year of construction: 2005, condition: used, Chamber spray cleaning system Basket usable dimensions, loading basket: L x W x H 842 x 659 x 512 mm Maximum loading weight: 100 kg; loading unit in front of the system included Itedpfxoz E I Sye Ahbon 2-tank design: Cleaning (1,200 liters) Rinsing (1,200 liters) System with electric heating - Cleaning process: Spraying - Basket remains stationary, swings, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Vacuum drying - Full filtration of the cleaning solution (Tank 1), 2x bag filters, filter fineness freely selectable - Automatic water refill for each tank - Coalescence oil separator External dimensions: 4,300 x 4,360 x 4,020 mm System weight: 5 tons Connection power: 110 kVA Fuse: 250A Control: Siemens S7 The system is fully functional, but with the limitation that operation via the panel is only partially functional. This is a consignment sale; the system must be dismantled and collected on-site by the buyer.

Year of construction: 2010, operating hours: 37,000 h, condition: excellent (used), functionality: fully functional, Walther Trowal CB 1200: Year of manufacture 2010, 37,100 operating hours, speed-controlled, container in new condition! Includes pneumatic soundproof lid and a large number of sieves with various hole sizes. Iodpfx Aoz E Iwcohbotn Rösler RT 850 Euro: 51,300 operating hours, good condition, heating system is working, discharge flap is pneumatic, with pneumatic soundproof lid and dust extraction system. Only to be sold as a set. Price is net, plus VAT. Please submit inquiries via email; no phone calls, thank you.

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. Itedpfx Ahjz Eq Epjbsn ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Year of construction: 1999, condition: good (used), 1 used micro-blasting system Manufacturer: Peenmatic 1000 SKD Year of manufacture: 1999 (The machine has since been overhauled at the Peenmatic factory) Itodpfx Ahsz Dulqsben with pneumatically operated tilting hood with filter tower, blasting guns, operating manual special features: - Tilting hood, opening angle approx. 70° - Pneumatic filter cleaning Working area: 800 x 800 x 840 mm Good, well-maintained condition Overall dimensions (without filter tower): 1800 x 1900 x 2000 mm Weight: 530 kg (blasting system), 100 kg (filter tower)

Year of construction: 2002, condition: good (used), machine/vehicle number: 3298, Offer 26206 Twin-chamber blasting cabinet with material recovery and dust extraction Technical data: - 2 blasting chambers - Blasting chamber width / blasting chamber depth: 600 / 940 mm each - Workpiece access via side doors - 2 hinged viewing windows: 400 x 250 mm Itedjz Dt I Djpfx Ahben - 2 blasting guns - 2 electric foot switches - Material recovery system - Dust extraction system with cartridge filter - Power supply: 400 V / 3 kW - Pneumatic connection: 6 bar - Space requirement: approx. W 1500 x H 2200 x D 1600 mm - Weight: approx. 350 kg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total width: 1,200 mm, total height: 2,100 mm, total length: 1,700 mm, overall weight: 310 kg, inner dimension width: 740 mm, inner dimension length: 1,000 mm, inner dimension height: 770 mm, Equipment: lighting, Auer ST 1000 J Blasting Cabinet / Blasting System – Year of Manufacture 2003 Ijdpez Drfuofx Ahbetn Technical Data: Manufacturer: Paul Auer GmbH Model: ST 1000 J Year of Manufacture: 2003 Machine Number: 3440 Blasting Chamber: approx. 1,000 × 770 × 740 mm External Dimensions: approx. 1,700 × 2,100 × 900 mm Load Capacity of Working Grate: 200 kg Blasting Gun: SPA 80 Air Nozzle: 4.0 mm Blasting Nozzle: 11.0 mm Compressed Air Consumption: approx. 0.73 m³/min at 4 bar Electrical Power: 1.0 kW Weight: approx. 310 kg

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 16-176-82, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 12 A, input frequency: 50 Hz, type of input current: AC, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Two used high-frequency (HF) machines from the manufacturer AMYSA-YVERDON SA, type AM 176, are for sale. These machines are particularly suitable as sources of spare parts, for retrofitting, or as a basis for a customized rebuild. They are offered in their current condition, as shown in the photos. Machine 1 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Machine number: 16-176-82 Voltage: 380 V / 50 Hz Power: 7.5 kVA Current consumption: 12 A Machine 2 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Machine number: 03-176-82 Voltage: 380 V / 50 Hz Itedpjz A E Erjfx Ahbjn Power: 6.5 kVA Current consumption: 10 A The existing mechanical, hydraulic, and electrical components, as well as the installed control systems, are included in the offer. The HF generators and resonant circuits are not included in the offer. These are older, used industrial machines. Complete functionality is not guaranteed. An inspection can be arranged by appointment. The machines are currently being disassembled. Collection by the buyer at the location in the Basel region, Switzerland. Price: CHF 2,500 per machine, negotiable Package price for both machines available upon request. Sale from the location, without warranty and excluding any liability for defects.

Year of construction: 2001, condition: good (used), CLEANING SYSTEM Itedpfxsz Ahf Rj Ahbjn Manufacturer: MAFAC, Model: ELBA, Year of manufacture: 2001

Year of construction: 2018, condition: good (used), functionality: fully functional, FOR SALE: KIGO CPT-1C-3S Chemical Pre-treatment & Spray Washing Chamber For sale is a high-quality, versatile industrial chemical spray washing chamber manufactured by KIGO in 2018 (Model CPT-1C-3S). Designed for cleaning, degreasing, and surface pre-treatment of metal parts prior to coating/painting. The system handles both lighter workpieces via an overhead conveyor and heavier parts via a floor wagon. Key Features & Capabilities: 3-Stage Treatment Process: Stage 1: Degreasing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 2: First Rinsing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 3: Second Rinsing (ambient temperature) Flexible Workpiece Dimensions: Lighter Parts (Overhead Track): Max dimensions: 2,500 x 1,200 x 2,000 mm (L x W x H) Max load capacity: 300 kg Heavier Parts (Floor Wagon): Max dimensions: 1,500 x 1,000 x 1,000 mm (L x W x H) Max load capacity: 1,500 kg Automatic Distribution Wagon: Positioned beneath the chamber floor to automatically direct runoff back to the correct tank, preventing liquid cross-contamination. Pneumatic Doors: Air-operated doors seal the chamber tightly during spray cycles. Heavy-Duty Construction: Tanks and floor made of AISI 304 L stainless steel. Structural frame built with epoxy-painted steel profiles and 50 mm polyurethane insulated panels. Technical Specifications: Manufacturer: KIGO O.E. Model: CPT-1C-3S (Serial Number: 0304-29-FL/PP) Year of Manufacture: 2018 External Dimensions: 7,348 x 3,758 x 4,334 mm (L x W x H) Internal Chamber Dimensions: 3,300 x 1,900 x 2,585 mm (L x W x H) Tank Capacity: 3 x 1,000 liters Isdpfx Aszz I Trshbjtn Pumps: Ebara centrifugal pumps (3 units, 5.5 kW) & Lowara pumps (2 units) Exhaust Fan: Stainless steel vapor extraction fan, 5,000 m³/h capacity (1.5 kW motor) Control System: Central electrical control panel with touch screen interface (ECP-PT07), adjustable spray/drip-off cycle times, automatic refilling, and level sensors. Condition & Documentation: Professional-grade industrial unit built for easy maintenance. Includes complete operation and maintenance manuals along with pneumatic/electrical schematics.

Year of construction: 1991, operating hours: 19,888 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1.844, MACHINE DETAILS Control system: CNC Iodszxcl Repfx Ahbjtn Operating hours: 19,888 h

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status Itodpfx Aezxcfkshbon - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Year of construction: 2017, condition: used, A Hege/Walther Pilot painting system consisting of a wash booth, preparation room, spray booth, two drying booths, lift/lower station and manual hand-pushed monorail conveyor is offered. 1) Hege wash booth, year of manufacture: 2017, washing device: electrically heated steam cleaner, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 8000mm/5000mm/3000mm. 2) Walther Pilot preparation room, year of manufacture: 2008, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 5140mm/4120mm/3000mm. 3) Walther Pilot spray booth, year of manufacture: 2008, ventilation: supply and exhaust air, recirculation mode possible, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 4) Walther Pilot drying booth, year of manufacture: 2008, ventilation: recirculation mode, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 5) Hege drying booth, year of manufacture: 2017, ventilation: recirculation mode, heating: pumped hot water, booth dimensions X/Y/Z: approx. 5840mm/4120mm/3000mm. 6) Hege lift/lower station, year of manufacture: 2017, lifting capacity: 980kg, payload: 998kg, lift: approx. 2500mm, lifting speed: approx. 17.4m/min, version for asymmetrical load distribution: 70%/30%. 7) Hand-pushed monorail conveyor, year of manufacture: 2008, extension: 2017, operating mode: manual, load capacity: 400kg/m, max. trolley load: 200kg, max. load bar capacity: 400kg, max. load between the support brackets: 500kg, max. system temperature: 80°C, max. temperature in the area of the lift/lower station: 40°C. Documentation available. An on-site inspection is possible. Itjdpfxjzwfqto Ahbon

Year of construction: 1993, condition: used, Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible. Itedpfxszv T I Ds Ahbsn