Hanssons Åkeri i Örebro AB

Condition: ready for operation (used), Year of construction: 2023, Pallet handling system manufactured in 2023. This NEUMAIER AGV Factory Shuttle FS404 features a payload capacity of 400 kg and dimensions of 830 × 1350 mm. It is equipped with a 2-way drive and steering system, ensuring efficient navigation. The safety features include a PSA laser scanner and a safety bumper for reverse travel. If you are looking to get high-quality pallet handling capabilities, consider the NEUMAIER AGV Factory Shuttle FS404 machine we have for sale. Contact us for further details. Kwjdpeymcqkefx Agzeu • Units available: 6 • Dimensions: 830 × 1350 mm • Payload capacity: 400 kg • Lift stroke: 100 mm • Drive system: 2-way drive and steering system • Navigation: Geonavigation • Safety: PSA laser scanner PLd; safety bumper for reverse travel • Indicators/HMI: LED status indicator (green/yellow/red); information display • Communication: WLAN (IEEE 802.11 a/b/g/n/ac, 5 GHz); minimum signal strength -60 dB; WPA2 minimum • Battery: LiFePO4, 48 V / 42 Ah; 80% SoC after 7000 full cycles • Charging: Automatic contact charging; up to 48 A; power supply 230 V / 16 A • Software: MFS management software • IT requirements for software: Windows Server 2016 (64-bit) or Windows 10; i7 4-core CPU, 8 GB RAM, 500 GB HDD; graphics OpenGL 3 or DirectX 11

Condition: excellent (used),

Condition: used, EVG Welding mesh line | model SLW 12/94 – RV Technical data: Mesh width max.: 2600mm Mesh length max.: 8000mm Cross wire pitch min.: 50mm then continuous Longitudinal wire pitch: 100mm, 150mm, 200mm, 300mm Cross wire diameter: min. 4mm - max. 8.5mm Longitudinal wire diameter: min. 4mm - max. 12mm Max. welding power: (D=100mm) E + F = 20.5mm Machine speed (see operating diagram): max. 130 QD/min Wire spool weight: max. 3000kg Stacking height: max. 650mm Stacking weight: max. 4000kg Electrical data: Nominal power of welding transformers: 1500 KVA at 50% of the duty cycle Drive power: 355KVA Mains voltage: 3 x 400V Mains frequency: 50 Hz Status: Line currently still in production. Mesh width max.: 2600 mm Mesh length max.: 8000 mm Cross wire pitch min.: 50 mm then continuous Longitudinal wire pitch: 100 mm, 150 mm, 200 mm, 300 mm Cross wire diameter : 4 - 8.5 mm Longitudinal wire diameter: 4 - 12 mm Max. welding power: (D=100 mm) E + F = 20.5 mm Machine speed (see operating diagram): max. 130 QD/min Kwedpeymcp Tjfx Agzju Wire spool weight: max. 3000 kg Stacking height: max. 650 mm Stacking weight: max. 4000 kg Nominal power of welding transformers: 1500 KVA at 50% of the duty cycle Drive power: 355 KVA Mains voltage: 3 x 400V Mains frequency: 50 Hz

Condition: excellent (used), mileage: 294,131 km, power: 120 kW (163.15 HP), first registration: 04/2019, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 85 l, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 7, emission class: euro6, suspension: steel, total length: 6,300 mm, total width: 2,380 mm, total height: 3,120 mm, loading space length: 3,440 mm, loading space width: 2,180 mm, loading space height: 2,100 mm, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, seat heater, soot filter, tail-lift, traction control, Technical information Kwodpeymcp Hjfx Agzsu Number of cylinders: 4 Engine capacity: 2.143 cc Transmission Transmission: 7G-Tronic, 7 gears, Automatic Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Front axle: Max. axle load: 1850 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Double wheels; Max. axle load: 2300 kg; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60%; Suspension: leaf suspension Weights Empty weight: 2.960 kg Carrying capacity: 540 kg GVW: 3.500 kg Functional Tail lift: B.A.R. CARGOLIFT, tail lift, 750 kg Cooling: -20 °C to 20 °C Height of cargo floor: 90 cm Cooling engine: diesel and electric Wall thickness: 8 mm Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Identification Registration number: V-884-ZF Other information Cool unit make: Konvekta Additional information Please contact Moussa or Youssef for more information VIDEO: Mercedes Sprinter 516 CDI 163 HP Euro 6 Refrigerated box with tail lift, valid for category B (N1 / GVW 3500 kg) Konvekta Cooling with standby 380V / Day and night cooling +20 degrees Celsius / -20 degrees Celsius (cools, freezes, and heats) MT Multi-temperature 2 compartments C1: L. 3437 mm / W. 1429 mm / H. 2100 mm C2: L. 3412 mm / W. 753 mm / H. 2100 mm B.A.R. Tail lift 750 kg 294000 km NAP Technically and visually in good condition Cool unit brand: Konvekta

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Kedpeymcpyofx Agzewu Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: used, Year of construction: 2016, cutting height 133 mm tiltable sawblade 0-45° cutting width with rip fence 1250 mm motor 5,5 kw scorring unit cutting length 2500 mm Kodpfxjymcpms Agzowu machine avaiable from medio April

Condition: used, Manufacturer SCHNELL (Italy) Model barwiser 22 Main Characteristics Up to 22 mm *Images may not correspond to the real Kedpfx Aoymcpgsgzewu

Condition: used, TWO ROLLS BAR STRAIGHTENER PBVR6 Manufacturer: BRONX Capacity - Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm - Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm - Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left Scope of supply - Entry chanel - Duo introduction - Straightener - Exit chanel Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm Kwedpfx Aoymcn Aogzju Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left

Condition: used, Centerless grinder, made by CINCINNATI Kwjdpoymcnvjfx Agzju Bars diameter : 8 - 35 mm Bars diameter: 8 - 35 mm

Condition: ready for operation (used), Year of construction: 2003, Immediately available due to business liquidation: CNC Travelling Column Machining Centre Hedelius Type CB 80 – 2300 Year of manufacture 2003 CNC control Heidenhain iTNC 530 Very low spindle hours: 11,500 h Table 2900 x 750 mm Travel X/Y/Z 2300 / 800 / 600 mm Table load capacity 2800 kg Distance spindle – table 10 – 740 mm Spindle SK 40 Tool magazine with 30 positions Spindle speeds 30 – 8,000 rpm Feed rates 0 – 3,000 mm/min on all axes Drive power 25 kW Kodpoymcnpjfx Agzowu Weight 13 tonnes Price: EUR 19,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1999, Immediately available ex location: Universal cylindrical grinding machine TOS Kodpfx Agsymcniszowu Face, internal as well as plunge, and external cylindrical grinding between centers Model BHU 32 A Year of manufacture: 1999 Very few operating hours Internal grinding device Center height: 160 mm Grinding diameter: 320 mm Grinding length: 1500 mm Workpiece weight between centers: 250 kg Headstock speed: 1230 rpm Table feed rate: 0.005 – 5 m/min Drive power: 14 kW Workpiece headstock with 3-jaw chuck, 200 mm diameter Spindle speed: 12 – 400 rpm in 16 steps Grinding spindle head swiveling left/right Internal grinding spindle speed up to 16,000 rpm Belt filter system Numerous accessories – see pictures Weight: 5.5 t Offered at EUR 12,500.—plus VAT ex location

Condition: new, Year of construction: 2026, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 300 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: electric, total height: 2,275 mm, total length: 4,060 mm, total width: 3,315 mm, overall weight: 1,700 kg, Equipment: documentation/manual, The 2128 PANA ATC is a next-generation DANIBRUM CNC router, designed for modern workshops and manufacturing facilities seeking high productivity, consistent precision, and efficient automation in a single, fully integrated machine. Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine offers rapid tool changes and extended flexibility for processing a wide variety of materials: particle board, MDF, solid wood, plastics, Alucobond, and composites. Kedpfsymcncjx Agzewu The robust machine frame is supported by 25 mm linear guides, helical rack and pinion drives M1.25, and 750 W servo motors, ensuring fast, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, allowing fine speed adjustment and stable performance under load. The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing.

Condition: used, Straightener & polishing machine WRPT2, manufactured by KIESERLING Kodpsymcm Eofx Agzjwu Bars diameter : 10 - 35 mm Bars length : 3 - 6 m Scope of delivery includes : 1. Infeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 2. WRPT2 straightening machines, made KIESERLING with - 2-roller straightener with upper roller height adjustment and upper/lower angle adjustment - Two geared motors with cardan shaft drive - Infeed guide - Side guide support - 1 set of side guides 3. Outfeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 4 Electric control panel with manual movement buttons Bars diameter: 10 - 35 mm Bars length: 3 - 6 m

Condition: ready for operation (used), Year of construction: 1972, Immediately available from university: L & Z Lathe Boehringer VDF Type E 560 Year of manufacture: 1972 Very few operating hours Centre height: 305 mm Swing over bed: 610 mm Turning length: 4,000 mm Swing in gap: 810 mm Swing over cross slide: 375 mm Spindle bore: 82 mm Kwedpoymcmxofx Agzeu Spindle speeds: 7 – 1,400 rpm Drive: 12.5 kW Heidenhain digital readout Chuck Faceplate Multifix toolholder with many inserts Steadies Weight: 7 t Price: EUR 10,500 plus VAT ex location

Condition: used, Bar straightener WRPF 35-50, made by KIESERLING Bar diameter : 8 - 50 mm Speed : Up to 50 m/min Scope of supply includes : - Bar Loading channel - Input pinch-roll - Straightening machine WRPF35 - Exit pinch-roll - Bar Output channel Kedpfx Ajymcmrjgzjwu - Electric equipment. (Option: NEW with HMI control desk) - Existing spare parts - Documentation - Optional: Loading table - Optional: Unloading cradle Bar diameter: 8 - 50 mm Speed: Up to 50 m/min

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right Kedsymcmfjpfx Agzewu

Condition: used, Cut To Length CTL 2000x8, made by BRONX Strip width: 600 - 2.000 mm Strip Thickness: 2 - 8 mm Coil max. weight: 30 Tn Coil Outer Diameter: Up to 2.100 mm Coil Inner Diameter: 508mm - 610mm - 762mm with filler segments Sheet Length Stacker: 600 - 8.000 mm Stacking Capacity: 1 x 8000mm long x 2000mm wide packs Stacking: 10000kg maximum uniformly distributed over 5000mm sheet length Pack Height: 750 mm Kwjdpfx Ageymclbezeu Max. speed: 60 m/min

Condition: used, Slitter 650x3 Stainless Steel, made by GUIDA Main characteristics: - Type of products: Stainless Steel (INOX) - Thickness: 0.20 - 3.00 mm - Entry coil width: 20 - 650 mm - Coil maximum weight: 5000 kg - Coil outer diameter: maximum 1560 mm - Coil inner diameter: 400/500/600 mm - Minimum extractable diameter: 510 mm Kedpfsymciyex Agzswu Type of products: Stainless Steel (INOX) Thickness: 0.20 - 3.00 mm Entry coil width: 20 - 650 mm Coil maximum weight: 5000 kg Coil outer diameter: Max. 1560 mm Coil inner diameter: 400/500/600 mm Minimum extractable diameter: 510 mm

Condition: used, Slitting line 1500x 8, made by GUIDA Line composition: - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls - Titling table Kwedpjymciajfx Agzju - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Working Direction: From left to right Power supply tension: 380/50 Hz

Condition: used, Year of construction: 2006, Babyslitter 600x4 made LDM Manufacturer: LDM Model: 600x4 Year: 2006 For material Type: Stainless Steel / Carbon Stell / Carbon steel SAE1006, S235-S550, C45-C75, IF (NOW) Yield strength: 600 N/mm2 Scope of supply: - Loading Ramp capacity 6 ton; - Loading carriage; - Uncoiler - Electronic centring system - Straightening machine; 3 rolls Ø 65 mm - Shear - Centring device with vertical rollers - Idle rollers and feeder - Circular shear - Scrap collecting device - Scrap rewinder - Deburring press - Loop inlet table - Loop outlet table; Spacers shaft diameter: Ø 80 mm - Felt Press - Lubrication system - Conveyor line feeder - Deflector roll - Telescopic table - Recoiler - Unloading carriage - 4-arm turnstile - Complete tooling Useful Width (min.-max.): 150 - 600 mm Decoiler Coil Weight: 6000 kgs Coil inner Diameter: 508 mm Coil Ext Diam: 1600 mm Recoiler Coil Weight: 6000 kgs Coil outer Diameter: 1600 mm Slitting shaft diameter: 180 mm Cutting blades diameter: 320 mm Line Speed Introduction: 5-10 m/min Line speed Operation Max: 150-250 m/min Number of cuts: up to 20 cuts Yield strength: 600 N/mm2 Ksdoymcgxjpfx Agzswu

Condition: used, Year of construction: 2014, Cut to Length line 500x10, made Piefer. Technical data: Year: 2014 (new Stacker) Coil width: 100-500 mm Thickness: 2-10 mm Coil weight: 5 ton Leveller rolls diameter: 80 mm Scope of supply: - Lifting loading cradle - Expandable decoiler - 9 rolls leveller Kedeymcgfopfx Agzjwu - Hydraulic shear - Conveyor belt - Stacker - Control desk - Electrics & hydraulics Coil width: 100-500 mm Thickness: 2-10 mm Coil weight: 5 Tn Leveller rolls diameter: 80 mm

Condition: used, SCOPE OF SUPPLY: - Uncoiler Kwjdpeymcf Ujfx Agzju - Introduction and Pre-Straightening Group - Leveller - Looping Table for Automatic Cutting - Cross-Cut Shear - Measuring Table - Exit and Stacking Roller Table Coil weight: 5 Tn Coil width: 650 mm Thickness: 0.3 - 2.5 mm Coil external diameter: Max. 1500 mm Mandrel diameter: 480 - 520 mm

Condition: used, Cut-To-Length line CTL 2000x6, made SALICO LOADING CRADLE LIFTING DEVICE CANTILEVERED UNCOILER with third support, coil opener & threading table; electric brake; clockwise rotation PRE-LEVELLER 4-Hi LEVELLER with 15 working rolls, Ø 65 mm, 9 rows of supporting rolls, each row with independent adjustment. INTERMEDIATE TABLE Kwjdpfxoymcf Ie Agzou ELECTRONIC CIRCULAR SHEAR INTERMEDIATE TILTING TABLE INTERMEDIATE MOBILE TABLE INSPECTION PULT FOR STACKER TRAPDOOR FOR SCRAP EVACUATION MAGNETIC STACKER WITH DOBLE POSITION WEIGHTING DEVICE & CHAINS JIB CRANE FOR STRAPPING UNIT Coil Width: 500 – 2000 mm Strip thickness: 0.8 – 6 mm Coil weight: 30 ton Outer diameter: 508 – 2000 mm Inner diameter: 508 / 610 mm Max. speed: 80 m/min

Condition: used, WAFIOS Straightening and cutting machine Model RBK51A Working range - Diameter: 6 - 14 mm - Cutting length: 9000 mm - Speed: 23 - 130 m/min - Motor power: 37 KW Diameter: 6 - 14 mm Ksdpfx Asymcfzsgzjwu Cutting length: 9000 mm Speed: 23 - 130 m/min Motor power: 37 KW

Condition: used, WAFIOS RB43B Straight & Cut machine RB Series: High-end series Working range Kwedeymcfhepfx Agzeu Diameter: 5 – 10 mm Cutting length: from 500 mm Cutting speed: 80 c/min Line speed: 5 – 160 m/min Diameter: 5 – 10 mm Cutting length: from 500 mm Cutting speed: 80 c/min Line speed: 5 – 160 m/min Serie: RB: High-end