Dipl.-Ing. Winfried Schnabel GmbH

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Section Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material; punch actuation by hand lever; section steel shear operated by foot switch. Punch depth: 510 mm Pressing force: 60 t Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punch diameter: 27 mm in 17 mm Ncedpfjyayiqox Ad Nsl Punch diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,750 plus VAT, ex works

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Notching unit with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm Ncsdpfx Adjx Symnj Nol or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down - tool package Validity of safety inspection until Feb. 2026

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used punching and shearing machine from Peddinghaus Model: Peddimaster 110/170 Punching capacity: 110 tons Njdsx Iicwepfx Ad Nocl Shearing capacity: 170 tons Includes side stop and various tools

Condition: used, Year of construction: 2003, Max. punching and shearing capacity: 500 kN Punches, e.g., 20 mm holes in 20 mm steel Shears on the strip shear to 350 mm up to 13 mm steel Further technical data on request With a range of punches and dies as desired Ncedex H S Rnopfx Ad Njl

Condition: new, Year of construction: 2024, The machine is equipped with 5 workstations: • Punching station • Flat steel shear • Angle steel shear • Notching station • Bar steel shear (round and square) Technical Data Strokes per minute at 20 mm stroke: 37 /min Throat depth: 500 mm Punching force: 550 kN Hole diameter and thickness up to max.: 40×10 mm or 20x20 mm Ncodpfxjx Hzf Uo Ad Nsl Flat steel up to max.: 300×15 or 200×20 mm Angle steel 90° up to max.: 130x130x13 mm Angle steel 45° up to max.: 70x70x7 mm Bar steel up to max.: 40 mm Square steel up to max.: 40 mm Notching up to max.: 10 mm

Condition: good (used), functionality: fully functional, Year of construction: 1991, Hole punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm . Flat steel shears: 500 x 18 mm . Notching device with rectangular tool up to 13 mm . Profile steel shears, L-steel, 90° mm . - Machine in good original condition!! approx. 70 sets of hole punching tools . Nodex Dhrajpfx Ad Nocl .

Condition: as good as new (ex-display), Year of construction: 2024, Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg Ncedpfx Asxyyzxsd Nol

Condition: as good as new (ex-display), Year of construction: 2023, Incl. control for entering the bending angle. Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Ncjdsxyyy Uopfx Ad Nol Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: used, functionality: fully functional, Year of construction: 2002, Pressure, tn: 50 Punching capacity: Ø40 mm. in 10 mm. Throat/reach: 250 mm. Flat bar: 300 x 15 mm. Round bar: Ø40 mm. Square bar: 40 x 40 mm. Angle iron: 120 x 120 x 10 mm. Notching unit: Triangular. Year: 2002 Country of origin: Spain. Size (L x W x H): 1900 x 1550 x 1750 mm. Nodpfx Adoxyxtas Nocl Weight: 1.400 kg. With triangular notching station and 1000 mm. electrical length stop. All our used machines are tested and serviced before delivery.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 4073756691005, Offer 25360 Technical Data: Ncsdexupvbjpfx Ad Njl - Sheet and flat bar shear, blade length: 175 mm - Cuts flat steel up to 100 x 15 mm or up to 150 x 10 mm - Profile and bar shear: - Cuts angle steel up to 80 x 8 mm - Cuts round steel up to 32 mm - Cuts square steel up to 30 mm - Punching station: - Punching force: 360 kN - Stroke: 10 to 32 mm - Throat depth: 155 mm - Punches steel up to 20 mm Ø in 14 mm - Or up to 27 mm Ø in 10 mm - Drive: 400 V / 3 kW - Foot pedal - Space requirement approx. W 800 x H 1600 x D 855 mm - Weight approx. 600 kg - Various punch and die sets included

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm Ncodpoxp Ndhefx Ad Nol or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, pressure 60,0 t Nedpfx Adoxcuxqj Necl square edge steel 35,0 mm L-beam 120x120x12 mm round bar steel 40,0 mm punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm throat 220 mm flat steel 200x20 / 300x15 mm blade length 317 mm oil volume 45,0 ltr. work height max. 940 / 1140 mm strokes per minute max. 26 work stroke 55,0 mm total power requirement 4,0 kW weight of the machine ca. 1425 kg. Dimensions (HxWxD) 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder

Condition: excellent (used), Year of construction: 2018, punching pressure 60.0 t punch diameter 28 in 15 mm punch diameter 38 in 11 mm adjustment of stroke 0 - 60.0 mm round bar steel 40.0 mm L-beam 120 x 12.0 mm square edge steel 35.0 mm shear: flat material 200 x 20 / 300 x 15 mm blade length 317 mm strokes per minute max. 25 work height max. 900 / 1130 mm oil volume 75.0 l Nedjxachhopfx Ad Nocl voltage 400 V total power requirement 5.5 kW weight 1440 kg dimensions 1520 x 950 x 1780 mm From a maintenance workshop New price for basic machine including accessories ~ €17.000 Special price upon request - in checked conditions - machinevideo - ?v=KlpfYR1p9CI Equipment: - Electro-hydraulic profile steel shear - Punching station, flat steel shear, angle/profile steel shear, . notching station * Including special equipment: bending station - Heavy-duty and stable welded construction - Continuously adjustable stroke - Very compact design - Support table at notching and punching station - Side support/storage surfaces - 1x adjustable electrical contact length stop - 1x freely movable foot switch - Emergency stop button - Operating instructions (PDF)

Condition: used, functionality: fully functional, General Information Manufacturer: Peddinghaus Corporation Model: 210 Type: Hydraulic Ironworker Workstations: Punching, section shearing, flat bar shearing, notching, and round/square bar shearing. Capacity and Performance Punching Capacity: Approximately 55 - 60 tons (US tons). Punching: Typically, a 25 mm diameter hole in 16 mm thick steel. Angle Shear: 90-degree cut: Approx. 100 x 100 x 10 mm. 45-degree miter cut: Approx. 75 x 75 x 8 mm. Flat Bar Shear: Maximum thickness: Approx. 300 x 15 mm or 200 x 20 mm. Notcher: Plate: Approx. 10 mm. Angle: Approx. 75 x 75 x 8 mm. Round and Square Bar Shear: Round bar: Approx. 38 mm. Square bar: Approx. 32 mm. Other Information: Weight: Approx. 1700 - 2000 kg. Dimensions (L x W x H): Approx. 1500 x 800 x 1900 mm. Njdpfx Adjw Sy Ecs Njcl Verify the accuracy of the information with the seller.

Condition: used, Year of construction: 2005, round bar steel 32 / 17 mm square edge steel 30 x 18 mm L-beam 100 x 8 mm punching pressure 50 t weight of the machine ca. 900 kg dimensions of the machine ca. 1000 x 700 x 1700 mm Features: - Flat steel shears Cuts flat steel: up to 350 x 13 mm L-steel, 45° cut: up to 100 x 8 mm Blade cutting length: 370 mm Ncsdpfx Adswu Hkfo Nsl Working height: 734 mm - Profile and bar steel shears Shear cross-section: max. 1550 m² Stroke, infinitely adjustable: 10 - 36 mm - Shears with standard blade 90° L-steel 90° cut: up to 100 x 8 mm Round steel: 32 + 17 mm Square steel: 30 x 18 mm U-steel, 90° cut: up to 100 mm Double-T steel, 90° cut: up to 100 mm Working height (center of blade cross): 1044 mm - Notcher with square notcher U-steel, in flange: 80 - 120 mm Double-T steel, in flange 80 - 120 mm Notch width: 44.5 mm Notch depth: 50.0 mm Working height: 1000 mm

Condition: used, functionality: fully functional, Hydraulic bar steel shear with punch Manufacturer: Epple Model: E-HPS 65 E-Line Technical specifications Manufacturer Epple Model E-HPS 65 E-Line Stations 5 Punching force 65 t Max. punching capacity Ø 26 x 20 mm Stroke 55 mm Working radius 305 mm Working height 1,030 mm Motor 5.5 kW Dimensions (LxWxH) 1.7 x 0.95 x 1.90 m Weight 1.6 t Ncedpfx Aewtqmned Nol Equipment - Electric contact stop All details without guarantee. A demonstration is available at any time in our exhibition hall.

Condition: used, Year of construction: 1990, Used punching machine by Kingsland Ncodpfxswr Al Te Ad Nsl Type: 55 P 625 Capacity: 55 tons Throat depth: 625 mm Year built: 1990

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 19600 € 376.32 € 55 to 500 mm 5 40/10 bzw. 20/20 mm 20 mm 37 1/min 300x15 / 200x20 mm 10x42x90 mm 5 kW 2100 mm 1160 mm 2090 mm 1750 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, Ankörnvorrichtung oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp Nsdpfx Adowirgbe Necl 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 15600 € 299.52 € 55 to Ncodjwirfwopfx Ad Nel 750 mm 40x10 mm 37 1/min 5 kW 1930 mm 1200 mm 1800 mm 1885 kg hydr. drive Support table with stop Operating instructions in GERMAN and ENGLISH CNC options on request We have an extensive stock of punches and dies at your immediate disposal. WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 11500 € 220.8 € 1 55 to 500 mm 40 x 10 mm 37 1/min 5 kW 1550 mm 1200 mm 1950 mm 1150 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch Nedpfx Adowirabs Nscl WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu Nedpfswiq Evjx Ad Necl ca. 8 Wochen ab Auftragse Spanien 24800 € 476.16 € 60 to 500 mm 5 2 40x11 mm 32 1/min 350x10 mm 120x10 mm 45/40 mm 100x10 mm 150x10 mm 5.5 kW 2100 mm 1400 mm 2060 mm 1750 kg 5 workstations foot pedal trigger hydr. drive flat steel shears incl. Device for reducing the deformation angle iron scissors with round and square bar opening triangle claw punching and bending device for flat iron table at the flat steel and notching station user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Ncsdpfx Ajwgkq Tjd Nel Machine weight: approx. 1,800 kg

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Ncodpjwfdbpsfx Ad Njl Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: good (used), Offer 22188 Technical specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm - Min. roller conveyor height approx. 640 mm - Max. roller conveyor height approx. 1190 mm - Outer roller width approx. 260 mm - Roller diameter approx. up to max. 100 mm - Max. possible number of rollers: 13 - 10 rollers are installed - Total width of the roller conveyor approx. 500 mm Ncsdpfxswcphce Ad Njl - Total length approx. 3200 mm - Weight approx. 250 kg

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 See condition Nedev D Nzyjpfx Ad Nscl