TM Systeme + Maschinen Maier Industrievertretungen

Condition: refurbished (used), Year of construction: 2010, HOLTEC log infeed LINCK infeed EV40 LINCK V40 LINCK turning device DV55 LINCK infeed EV30 LINCK V25 LINCK double profiling unit VPP34 LINCK circular saw VS66 LINCK board separator SEA LINCK turning device DV35 LINCK centering device ZZP LINCK double profiling unit VP34 LINCK circular saw MKV LINCK SEK splitter wedge Itjdpfexpt Hgex Afijn

Condition: used, Year of construction: 2008, table diameter 1100 mm table load 1,2 t swivelling range 0 - 135 Grad turning speeds 0,15 - 3,4 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1300 Nm Itsdpsxpi Akefx Afion Dimensions (LxWxH) 2,8 x 1,6 x 1,6 m Welding turntable with new remote control • Self-locking gear system, no pre- or post-running under eccentric loads • Hydraulic height adjustment allows for virtually unlimited positioning • Frequency-controlled, infinitely variable speed of the rotary table

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, For sale is a drilling and milling machine from Alzmetall Itjdpfexn T S Hex Afion type Plus 3 DG The machine has been completely dismantled and overhauled. Inspection and test run possible at any time. Forklift available for loading

Condition: used, Year of construction: 2022, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 952 kg Description: - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm Itsdpfx Asxnqw Hjfion - Hole diameter 28 mm - Holes on surface in 100x100 mm grid - Rounded corners, edges, and holes - Side panel height 200 mm - Hole spacing on side panel 50 mm - Includes scaling on the surface - Construction reinforced with ribs - Grid lines enable precise assembly - Special equipment for welding tables available on request.

Condition: used, Year of construction: 2012, Welding Rotator SAF ROTOMATIC ST6W - No 1 Rotation: from 12 to 120 RPM Max Iodpexnibdefx Afiotn Year of construction: 2012 Maxi loading capacity: 6 T Trainer dimensions: L 2100 mm x W 800 mm x H 400 mm Simple rotator dimensions: L 1900 mm x W 300 mm x H 400 mm Mini ferrule diameter: Ø 300 mm Maxi ferrule diameter: Ø 300 mm Rotation by speed variator Voltage: 380 V Drive wheels dimensions: Ø 250 x W 80 mm Weight: approx 300 kg

Condition: new, Year of construction: 2022, functionality: fully functional, Brand New Nimo-KG SKV 300 C4 meat bin lifter year of construction 2022 Tipping height 183 cm. Ijdpfxoxl Tvgo Afistn

Condition: ready for operation (used), Welding positioner, turning table, rotary work table, used machine Manufacturer: Heinrichsglück Type: TB 10 E Overall dimensions: Width: 2300 mm Depth: 3100 mm Height: 2500 mm Weight: 10,000 kg Isdpsxk Rt Tefx Afistn Year of manufacture: 1984 Table size: 1800 mm Load capacity: 10 tons

Condition: excellent (used), Year of construction: 2018, load capacity: 500 kg, max. load capacity 500 kg table diameter 700 mm table rotation speed 0.11 - 1.2 rpm net weight 750 kg foot pedal (start-stop/left-right) Little used, very good condition Remote control (wired) Itsdpfx Ajxg Iwnefion

Condition: used, Adjustment unit with 2 positioning tables featuring hand crank adjustment - made from aluminium system profiles. Linear unit, linear axis, loading unit, linear guide Manufacturer: Custom-built Year of manufacture: 2000 Track length: 3600 mm Travel distance: 2750 mm Ijdjxf Uq Espfx Afistn Table size: 590 x 355 mm Usable table area with index: 470 x 355 mm Tabletop material thickness: 30 mm (steel) Aluminium system profile rail, length: 3600 mm (profile length) Aluminium system profile, cross-section: 80 x 80 mm (base rail for guide) Aluminium system profile rail, cross-section: 123 x 120 mm (front) Height to top of tabletop above floor: 640 mm Height to top of linear guide carriage above floor: 615 mm Height to top of aluminium system profile 80 x 80 mm above floor: 575 mm - Stable and torsion-resistant construction made from aluminium system profiles (80 x 80 mm) and steel feet - For handwheel adjustment, a rack is bolted to the aluminium system profile rail - Hand crank adjustment via gear and rack, individually for each table - Spring-loaded index pin for fixed indexing, unlockable by hand lever - Adjustable index plates on the aluminium system profile rail - Standard linear guide width = 28 mm, height = 26 mm Overall dimension L x W x H: 3640 x 900 x 780 mm Weight: 450 kg Good condition

Condition: used, load capacity: 100 kg, overall weight: 43 kg, With the Siegmund ST Box, your tools are always within easy reach. Create storage space and keep your welding table organized. The maximum load capacity of the ST Box is approx. 100 kg. Each individual drawer has a maximum load capacity of approx. 50 kg. The continuous housing protects the drawer contents from dirt and welding spatter. Delivered pre-assembled. - Powder-coated - Regardless of table size or ribbing, the ST Box can be fitted to any Siegmund welding table. Ijdpfsxfthiex Afiotn Drawer extension: 500 mm

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! !! SPECIAL OFFER !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Itodsxflftspfx Afion Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes 4x feet Basic equipment - Includes accessory set (see image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: used, functionality: fully functional, load capacity: 2,250 kg, table load: 2,250 kg, Heinrichsglück welding positioner, load capacity 2250 kg. Speed and tilt are infinitely adjustable. Comes with several remote controls. Older technology but robust construction. Clamping plate diameter: 1.0 m. Height horizontal: 1.4 m. Height at center: 1.2 m. Base/frame: 0.42 m (can be removed for lowering). Length: 2.0 m. Width: 1.2 m. Iedpfx Afsxd Ayxsistn

Condition: excellent (used), Year of construction: 2012, Welding manipulator PEMAMEK - APS 25000 MACH-ID 9217 Make: PEMAMEK Type: APS 2500 3 Axis Hydraulic Positionar Remote control for RC32H-remote  Rotation speed 0,02 - 0,4 Rpm Tilting torque 175000 Nm Rotation torq 40000 Nm Height minimum 1600 mm Iedpfxjxb Tm De Afiotn Height maximum 2860 mm Tilting 0-130 Grad Digital RPM Display Length:4000mm Width:1950mm Height:1600mm Weight:11000kg

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, table load: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 - 1500 mm Suitable for welding, assembly, processing, etc. With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range 360° infinite Swivel range 360° infinite Lift: 1000 - 1500 mm Itedpoxbh Dqsfx Afien Arm outreach radius: 1 meter

Condition: excellent (used), load capacity: 3,000 kg, table load: 3,000 kg, Equipment: foot remote control, Belgium Welding 3 To 3,000 kg load capacity welding positioner, complete set Horizontal load capacity 3,000 kg, tilted load capacity 3,000 kg Stepless tilt and speed adjustment Very robust construction Speed steplessly adjustable from 0.05 to 0.7 rpm, digital display Turntable diameter: 1,400 mm Height horizontal: 1,450 mm, tilted to center: 1,200 mm Length: 2.0 m x Width: 2.0 m Hand-held remote control with digital display and foot remote control Ijdpfx Afoxbhrhsietn

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular adaptability and custom special versions available Operating principle: The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm Itsdpfx Asxbhp Hjfien - Arm reach radius: 1.2 meters

Condition: as good as new (ex-display), Year of construction: 2021, - Stationary scissor lift table with single scissors - Steel perforated grid plate System 16 - Platform size: 2000x1000x100 mm - Hole spacing: 50 mm - Hole diameter: 16 mm - 360-degree rotary platform beneath the grid plate - Grid system with 4 stops every 90 degrees - Lift up/down operated by a hand control with 3 m cable - Battery-hydraulic drive - Load capacity: 700 kg - Construction height: 670 +/- 60 mm - Useful lift: 700 mm - Maximum height: 1370 +/- 60 mm - Own weight: approx. 810 kg - Stationary version with 4 base plates. Isdpfexazzyex Afietn

Condition: excellent (used), Year of construction: 2011, 3 Axis Hydraulic Positionar Itodpfxsxazy No Afion Remote control for RC32H-remote  Rotation speed 0,02 - 0,4 Rpm Tilting torque 175000 Nm Rotation torq 40000 Nm Height minimum 1600 mm Height maximum 2860 mm Tilting 0-130 Grad Digital RPM Display Length:4000mm Width:1950mm Height:1600mm Weight:11000kg

Condition: excellent (used), Year of construction: 2012, 3 Axis Hydraulic Positionar Remote control for RC32H-remote  Rotation speed 0,02 - 0,4 Rpm Tilting torque 175000 Nm Rotation torq 40000 Nm Height minimum 1600 mm Height maximum 2860 mm Tilting 0-130 Grad Digital RPM Display Table size L x W / or ø:1950mm Length: 4000mm Width: 1950mm Iodpfxsxang Ae Afietn Height: 1600mm Weight: 11000kg

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid Isdpfx Aoxab Rnefietn - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 726 kg The welding tables are provided with a scale as standard. Isdpfxsxab D Uo Afiotn Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment

Condition: new, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Description : - Special set for SIEGMUND 28 clamping tables - original SIEGMUND accessories (!!) included : - 1x 28 mm mobile tool trolley - 30x quick release bolts with short twist lock - 8x universal stop 150 L - nitrided - 4x universal stop 225 L - nitrided Isdpfx Afexabvdeiotn - 8x stop and clamping angles 175 L - cast - 2x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 750 G left - nitrided - 1x stop and clamping angle 750 G right - nitrided - 1x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 500 G right - nitrided - 4x stop and clamping angles 300 G left - nitrided - 8x prism Ø60-135° burnished - 16x Professional screw clamp - Nitrided - 6x Professional screw clamp 45°/90° - Nitrided - 4x universal stop 300 - nitrided - 1x accessory set consisting of: - eccentric, Allen key, brush, - other accessories such as: Probe CleanBasic, Probe Non-Stick and burner holder

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Itsdpfoxabqhjx Afijn The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale - Including 4x basic equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90 Grad turning speeds 0,6 - 6,0 U/min bore 60,0 mm motor 230 Volt Itedpfxsxabm Ns Afijn weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90 Grad turning speeds 0,2 - 2,5 U/min bore 90,0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90,0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time Itjdpfjxabl Sex Afien - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch