Gross Werkzeugmaschinen GmbH

Condition: used, Year of construction: 2005, Available immediately ex-yard: CNC turning and milling center Mori Seiki Type ZT 1500 YB Year of manufacture 2005 CNC control MSX 501 Main and counter spindle, 2 tool turrets, powered tool stations Turning diameter max. 310 mm Max. distance between spindle centers 1000 mm Max. turning diameter 190 mm Max. turning length 235 mm Spindle speeds 50 – 5000 rpm Drive power main spindle 22/18.5 kW Spindle bore 73 mm Chuck diameter 210 mm Bar diameter 52 mm Tool turret 2 Tool positions 2 x 16 stations Number of powered stations 2 x 16 stations Speeds of powered stations max. 6000 rpm Drive power each 5.5 / 2.2 kW Chip conveyor Dksdpfxjztkfhj Akvsr Coolant system Y-axis 1 x C-axis 2 x Counter spindle Powered stations 2 x Tool turrets 2 x Fixed tool holders 12 plus 10 Powered tool holders 6 plus 1 Bar loader IEMCA Master 880 MP – E Weight 10 tons

Condition: good (used), FANUC 31i-B control system C-axis on both spindles Milling drive on the upper turret Milling drive on the lower turret Dkedpfx Akeztdaxsvor B-axis on the upper turret: +/- 91° Y-axis on the upper turret: +/- 40 mm Y-axis on the lower turret: +/- 32.5 mm Larger main spindle: A5 Bar diameter: 51 mm Larger counter spindle: A5 Bar diameter: 51 mm Polygon turning function Unloading with gripper hand on the upper turret Intelligent handwheel AME inclined bed filter system 10-70 bar

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Dkedpfx Akoztdarsvsr Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: good (used), Year of construction: 2007, Turning center GILDEMEISTER/DMG Sprint 42 linear with DMG FANUC 160 control, serial number 2601-0386, year of manufacture 2007, operating hours estimated by management at approximately 41,295 hours, chip conveyor, bar feeder FMB Turbo 5-55. Dkjdpfxsztc Sye Akver

Condition: good (used), Year of construction: 2006, Turning center SPINNER TC32-MC, control system SIEMENS Sinumerik, hydraulic bar feeder LNS Super Hydrobar, purchased in 2006. Dkodpfjztc Hqjx Akver

Condition: excellent (used), Year of construction: 2006, operating hours: 37,245 h, functionality: fully functional, machine/vehicle number: 188270, Controller: Mazatrol Matrix Includes: Motoman Robot ES165-D100 – Payload 100 kg Max. machining diameter: 760 mm Max. machining length: 1524 mm Main spindle (new in 2023): Chuck size: 12 Max. speed: 3300 rpm Dedpfx Asztb D Uekvskr Motor output: 30 kW / 40.0 hp Milling spindle: B-axis travel: 225° Magazine capacity: 20 Max. speed: 12000 rpm Motor output: 19 kW / 25 hp Feed axes: Travel: X = 630 mm Y = 230 mm Z = 1585 mm Fully integrated Z-axis main and sub spindle

Condition: used, Year of construction: 2019, Lathes Travel distance X: 305 mm Travel distance Y :105 mm Dkedpfx Akjztbu Tjvjr Travel distance Z: 0 mm turning length: 1050 mm max. turning diameter: 900 mm max. circulation diameter: 650 mm spindle boring: 117 mm input Power: 30 kW max. turning moment: 1750 NM range of revolutions till: 2800 rpm Control: Fanuc 31i powered tools Powered tools: 12 control Fanuc Scrapper chip conveyor Y-axis C-axis BMT75 turret Tailstock Hydraulic chuck

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. Djdpfozr U Auox Akvjkr - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2014, turning diameter 200 mm turning length 450 mm control Siemens 810D ShopTurn spindle bore diameter 51 mm number of controlled axis 3 turning speed range 0 - 5.000 U/min power requirement 16,5 / 11 kW rapid speed 30 m/min Djdpfx Akozr Rntevjkr number of tapers in turret head 12 VDI 30 number of driven tools in turret 6 Spindel speed of driven tools 4500 U/min Spindelpower on driven tool 8,4 kW tail stock Ja/ Yes weight 3,2 t dimensions 4,4 x 2,05 x 1,8 m CNC-Lathe with driven tool Only 3950 h spindle time! Equipment: - chipconveyor - 3-jaw chuck Kitagawa Ø 210 mm - some toolholders VDI 30 - 1 + 1 driven toolholder - programmable tailstock - DMG SLIMline Panel with ShopTurn - Signal lamp - tool measuring - programmable tailstock

Condition: used, Year of construction: 2002, functionality: fully functional, spindle speed (max.): 3,500 rpm, spindle bore: 91 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 670 mm, total height: 2,100 mm, total length: 4,045 mm, total width: 1,900 mm, spindle nose: 8, overall weight: 6,000 kg, CNC Fanuc 18i - T CAPABILITIES: Max. workable diameter from bar stock: 80 mm Max. workable diameter: 490 mm Max. workable length: 670 mm Max. rotating diameter: 600 mm MAIN SPINDLE: Max. rotation speed: 3500 rpm Spindle nose: ASA 8’’ Spindle bore: 91 mm Inner bearing diameter: 140 mm Chuck diameter: 315 mm Motor power: 22 kW Max. torque: 539 Nm TURRET: Number of positions: 12 Tool shank for external tools: 20 x 20 x 25 x 25 mm Tool shank for internal tools: 32 – 40 - 50 mm Rotation time: (1 position) 0.15 POWER TURRETS: Number of positions: 12 Max. rotation speed: 4,000 rpm Motor power: 5.5/3.7 kW Dodpfx Akjzr N Sdevskr AXES: X-axis travel: 255 mm Z-axis travel: 67 mm B-axis travel: -- mm X-axis rapid traverse: 20 m/min Z-axis rapid traverse: 24 m/min B-axis rapid traverse: -- m/min TAILSTOCK: Tailstock taper: CM 5 and 4 Automatic B-axis positioning: 660 mm B-axis rapid traverse: 15 m/min COOLANT: Tank capacity: 250 liters Pump nominal flow rate: 120 liters/min Pump motor power: 0.75 kW DIMENSIONS-WEIGHT: Overall dimensions with chip conveyor: 4,450 x 1,900 x 2,100h mm Spindle center height: 1,060 mm Weight with chip conveyor: 6000 kg Machine complete with: • 25 mm Autoblok chuck • 6 fixed internal tool holders • 5 fixed external tool holders • 1 Front tool holder • 4 axial motorized tool holders + 2 radial motorized tool holders • Presetting system • Operating manuals and CE declaration

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Dodpfx Aszr Hgxokvjkr Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 192 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 290 mm, spindle nose: A2-8, number of spindles: 2, number of tool turrets: 3, Used Nakamura Tome Super NTY3 Jumbo machine (2 spindles, 3-turret lathe with Y-axis) Max. turning diameter: 325 mm Max. turning length: 250 mm Dksdpfx Akozr D A Rovsr Distance between spindle centers: 260 - 1095 mm 11x Rotary tool holders 20x Boring tool holders 15x Driven angled tool holders 18x Driven axial tool holders 2 x Hainbuch collets 80 mm (main and counter spindle)

Condition: ready for operation (used), Year of construction: 1999, Available immediately from our location: 5-axis CNC turning and milling center WFL, Voest, Alpine, Steinel Type WFL M 30 – G Year of manufacture 1999 Siemens Sinumerik 840 C Turning length 1050 mm Diameter over slide 440 mm Turning spindle on the right Turning spindle on the left Main drive 37 kW Spindle speeds 10 – 5000 rpm Cross slide Counter spindle housing on the right Dedpfx Akjzr D Adovskr Cross slide on the right Turning, boring, and milling unit IKZ (internal coolant) 90 bar Tool magazine with 96 positions Disc turret on the right, 2 x 12 positions C-axis on the left and right Hydraulic chuck on the left and right Chip conveyor Weight with accessories 12 tons Price: EUR 38,000.— plus VAT, ex works.

Condition: good (used), Year of construction: 2012, Vertical CNC lathe with a 12-position turret and powered tools; Year of manufacture 2012, in good condition; Fanuc 31i control with Manual Guide i; 630 chuck – 900 mm turning diameter; 2-speed gearbox – resulting in very high torque; Tool setter, detachable; Chip conveyor; Various tool holders, fixed and powered; Only approximately 4,100 operating hours; Dkodpfx Akszrwa Nevor An inspection is possible and recommended by arrangement, with the machine powered on.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,138 h, functionality: fully functional, turning length: 800 mm, turning diameter: 450 mm, spindle motor power: 11 W, spindle speed (min.): 40 rpm, spindle speed (max.): 400 rpm, spindle bore: 65 mm, travel distance X-axis: 550 mm, travel distance Z-axis: 815 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 1,830 mm, total length: 4,100 mm, total width: 1,960 mm, spindle nose: ASA 6, overall weight: 6,100 kg, spindle diameter: 210 mm, Equipment: documentation/manual, USED ​​2-axis lathe with Fanuc 0i-TF PLUS CNC Dksdpezrnqxofx Akvor

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 610 mm, turning diameter: 410 mm, spindle motor power: 18 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 81 mm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 1,700 mm, total length: 3,500 mm, total width: 1,700 mm, spindle nose: ASA 8, overall weight: 4,900 kg, swing diameter over top slide: 460 mm, spindle diameter: 255 mm, Equipment: documentation/manual, USED ​​3-axis lathe with driven tools and Fanuc 0i-TF CNC Dksdpezrnl Aefx Akvsr

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Djdpjzrmiaefx Akvokr

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2006, serial no. 1191 Djdjzrk I Hopfx Akvjkr Description: Y-axis on S1, V-axis, 2 x C-axis, 2 x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, Hydrafeed Multifeed bar feeder magazine. Condition: Very well maintained, good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered on – or a video is available. Delivery time: approx. 4 weeks from order.

Condition: used, MAZAK QTN 100II MSY, manufactured in JAPAN, year 2009 Max. turning diameter: 280 mm Spindle max. speed: 6000 rpm Two Hainbuch collet chucks mounted on the spindle Spindle bore: 45 mm 12-station turret Counter spindle max. speed: 6000 rpm Tool probe Part catcher Bar feeder interface Axis travels: Dkedpfx Akezrkztevor X: 185 mm Y: 100 (+/- 50) mm Z: 455 mm W: 460 mm Included with the machine: - 8 standard tool holders - 4 powered tool holders (2/2) - Documentation - Chip conveyor

Condition: good (used), Year of construction: 2011, operating hours: 39,000 h, functionality: fully functional, Siemens 840D control system, 52 mm spindle bore, 12-station turret, VDI 30, Y-axis, counter spindle, tool measuring arm, chip conveyor, high-pressure system, extensive range of accessories. Dksdpfezrhwrox Akvjr

Condition: good (used), Year of construction: 2019, 256mm maximum cutting diameter, 455mm max turned length, Dkedpfx Aezrfnuokver 4,000rpm spindle speed, 51mm bar capacity, 12 station VDI turret, milling speed 5,000rpm, 16kW spindle motor, Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor, parts catcher, Barfeed unit.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 5101163, spindle motor power: 30,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, type of input current: three-phase, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, total height: 3,800 mm, total length: 9,100 mm, total width: 7,300 mm, distance table center to spindle nose: 950 mm, overall weight: 29,000 kg, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 700 mm, coolant supply: 20 bar, table length: 3,500 mm, table height: 900 mm, table width: 1,200 mm, number of slots in tool magazine: 45, Equipment: chip conveyor, documentation/manual, The machine is in working condition and has no problems. Dkedpezq Rz Defx Akvsr

Condition: defective spare-parts repository (used), Year of construction: 1986, functionality: not functional, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, Sale from Bremen location Manufacturer Mazak Power Center SV-12 with Mazatrol CAM M – 2, with tool changer for 30 tools, with grooved clamping table and other accessories The machine is defective and is explicitly sold as a source of spare parts. The exact defect is the absence of the control board. However, many components are still complete and can be used as spare parts. A test run is not possible. Year of manufacture 1986 Technical data Travel distances X/Z-axis approx. 1250 mm, Y-axis approx. 550 mm Control system Mazatrol Cam M-2 Table size 1300 x 500 mm Max. table load approx. 800 kg Dodpfxezq H A De Akvjkr Travel distance X-axis 1250 mm Travel distance Y-axis 550 mm Travel distance Z-axis 550 mm Spindle mount BT 40 / SK 40 Spindle speed max. 400 – 6000 rpm Tool changer 30 tools Drive power 11 kW Weight 7000 kg L x W x H 360 x 300 x 295 cm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PT20SY0117, total height: 2,500 mm, total length: 4,100 mm, total width: 2,240 mm, overall weight: 12,000 kg, Control: Fanuc 18i - TB Swing over cross slide: Ø800 mm Max. cutting diameter: Ø620 mm Max. turning length: 740 mm Main spindle: speeds 50-5,000 rpm Spindle bore/Spindle nose: Ø76.2 / Ø68 Number of turrets: 12 Dkodpfozq A Dkox Akver B-axis: Ø810 mm Rotary tools: speed 50 – 4,000 rpm Rotary tool motor (turret one/turret two): 7.5/5 HP Rapid traverse (X/Z/Y): 790 / 20 m/min Sub spindle rapid traverse: 20 m/min Dimensions: Floor space: L = 4100 x W = 2240 x H = 2500 Machine weight: 12000 kg.

Condition: excellent (used), Year of construction: 2019, 3 x Miyano ABX-51SYY2 Years: 2016, 2018, 2019 Alps ASR RX45/51EV automatic bar feeder Fanuc 31i-B CNC Control Swarf coveyor Twin Spindles Twin Independent 12 Station Turrets Full Y-Axis on both Turrets Driven Tooling Djdpozq Aqdofx Akvokr T Thermal Compensation Tooling package Operating manuals Service history (where available) Barloader Alps Tool ASR RX 51Ev Machines available in October 2026